How to install Syntax highlighting

Okay, so I'm trying to get syntax highlighting for my jscrollpane, which I have been lead to use: http://ostermiller.org/syntax/
I downloaded the jar file, but I was wondering what do I have to do to start using the classes, I'm completely losses, I don't even know where to put it.

Well I don't know if this is the right way, but it seems to be at least going somewhere. I extracted the files of the jar file and put the all the extracted folder into the class folder of my current program. Then I tried to import the package with
import com.Ostermiller.Syntax.*;and when I complied it, it works so far.
but when I try to create an object it can not access it:
ToHTML toHTML = new ToHTML(); gets this error message,
--------------------Configuration: TEV3 - j2sdh1.4.2_13 <Default> - <Default>--------------------
C:\Program Files\Xinox Software\JCreatorV4LE\MyProjects\TEV3\src\TEV3.java:22: cannot access com.Ostermiller.Syntax.ToHTML
bad class file: C:\Program Files\Xinox Software\JCreatorV4LE\MyProjects\TEV3\classes\com\Ostermiller\Syntax\ToHTML.class
class file has wrong version 49.0, should be 48.0
Please remove or make sure it appears in the correct subdirectory of the classpath.
ToHTML toHTML = new ToHTML();

Similar Messages

  • How to enable syntax highlighting for jspf files on Dreamweaver CS5.5 on Mac

    I ran into an issue where I couldn't get the color coding (color coding style) for java server pages fragments (.jspf) files to show syntax highliting.
    I followed the adobe instructions on Changing and adding file extensions recognized by Dreamweaver without any luck.
    Here is the solution that worked for me:
    On a Mac:
    1. Edit the /Users/YOUR USER/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/DocumentTypes/MMDocumetTypes.xml
    Note: the Adobe instructions tell you to edit /Applications/Adobe Dreamweaver CS5.5/Configuration/DocumentTypes/MMDocumetTypes.xml (Editing this file didn't do anything for me, so you need to change the file above instead)
    Find,
    <documenttype id="JSP" servermodel="JSP" internaltype="Dynamic" winfileextension="jsp,jst" macfileextension="jsp,jst" file="Default.jsp" writebyteordermark="false" mimetype="text/html">
    Replace with,
    <documenttype id="JSP" servermodel="JSP" internaltype="Dynamic" winfileextension="jsp,jst,jspf" macfileextension="jsp,jst,jspf" file="Default.jsp" writebyteordermark="false" mimetype="text/html">
    2. Edit the /Users/YOUR USER/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/Extensions.txt
    In the All: section on top add the jspf extention right after jsp in my example it looked like this
    HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEME,CONFIG,MODU LE,PROFILE,ENGINE,SVG:All
    and I added the jspf and it looks like this now,
    HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,JSPF,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEME,CONFIG,MODU LE,PROFILE,ENGINE,SVG:All
    That's it, Quit Dreamweaver and open it up again. Open the .jspf file and see the color coding (syntax highlighting)
    Hope this helps you and seves you time figuring it out. If this helped, do a good thing, next time you figure something out, tell others about it to save their time too, like I did. Enjoy.

    TheGrandNabib wrote:
    I don't seem to have a user Library folder, my only Library folder is on the same level as my Users folder.
    From Locating your personal configuration folder in the Dreamweaver FAQ:
    In Mac OS X (Lion and Mountain Lion), open Finder and press Shift-Cmd-Go. Type ~/Library/Application Support in the dialog box, and click Go. You should then be able to find the configuration folder.

  • How to apply Syntax Highlighting in JTextArea

    Hi folks.
    At the moment my program does this:
    The user can drag and drop images into an environment which corresponds creates a Java file.
    So there is a panel that the user can drag images from and drop them to another panel. This in turn creates a Java file which is displayed at run time in a JTextArea.
    I would like to use syntax highlighting here. I have come across a couple of similar questions in this forum but so far haven't found a great example.
    Can anyone please point me to a good tutorial/example?
    Many thanks.

    lobrien9 wrote:
    I am already using NewtBeans. I had a look at that link but I can't seem to find any information regarding using the NetBeans editor in my own application.You're probably using the NetBeans IDE as your development environment. But this IDE has been developed in a modular way, so you can reuse parts of it to build your own application. Such a framework is call a RPC (rich client platform). The NetBeans IDE itself is build on this NetBeans Platform. I just started to read about it myself, but I think it's worth a try. Of course it's not a simple task to get to know this framework, but if your building Swing GUIs frequently it might be worth the effort. There are some books around about this topic. Search the NetBeans homepage for book references.
    -Puce

  • JSP Syntax Highlighting

    Does anyone know how to configure Syntax highlighting for JSP's in JDeveloper v3.2?
    Thanks
    Mark

    You need a plugin which supports JSP.
    MyEclipse does (along with a lot of other stuff)
    Lomboz also provides a jsp editor
    You can find a whole lot of eclipse plugins at
    http://www.eclipseplugincentral.com/
    http://eclipse-plugins.2y.net/eclipse/index.jsp
    Cheers,
    evnafets

  • In mozila 3.6 or higher version as i install Browser Highlighter addone then in my site when i edit any html content in fck editor or in tiny mce editor then it add a script name gwproxy how i can solve it

    in mozila 3.6 or higher version as i install Browser Highlighter addone then in my site when i edit any html content in fck editor or in tiny mce editor then it add a script name gwproxy its happend with 3.6 or higher version thanks
    == This happened ==
    Every time Firefox opened
    == i upgrqde mozilla to 3.6.3 version and i check it with on another computers

    Hi Deepak!
    This seems to be a well-known and quite widespread problem with this extension, unfortunately - the net is full of complaints about this issue, not to mention 'horror stories' about how this (otherwise fairly innocent and well-certified but clearly highly commercial) extension has 'sneaked' its way into peoples installations.
    I find it quite amazing that such an issue has existed for so long without the Browser Highlighter, TinyMCE and FCKeditor teams getting together and making a working fix - it should be rather easy to prevent with a tag or plugin check in editor code and/or a simple editor recognition routine in the extension.
    If you want (/need) to use this extension, I can only point you to the Browser Highlighter homepage for support; in [http://thebrowserhighlighter.com/help.jsp The Browser Highlighter Help section] it is clearly documented - first section, last paragraph - along with a link to [http://thebrowserhighlighter.com/blacklist.jsp this problem report form] where it seems you can ask for help solving the problem.
    However, given the (script-)name of the page, I suppose that reporting a problem on your own website (with all details) actually adds your site - or part of it - to a blacklist that TBH maintains to turn off TBH or at least problematic script injections when visiting sites registered in this list. So actually this might help you solve the problem quite easily, if they do what the page implies.
    Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help more users with similar problems.

  • How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows?

    I followed the instructions (which I modified for CS6) in this posting: http://blog.metameister.com/blog/2011/04/08/open-new-file-types-and-add-syntax-highlightin g-in-dreamweaver-cs5-on-window…
    but it did not work for CS6.
    How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows 7?
    cheers
    Marvin in Edmonton

    Ok, I figured it out after hunting for a few hours.
    Step 1. Add the File Type
    In Dreamweaver’s toolbar:
    Select Edit > Preferences; 
    under File Types / Editors, add .jspf to the line “Open in Code View:”.
    Step 2. Extensions.txt
    Add file type .jspf to the Extensions.txt files. There are two of these files:
    C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
    C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration
    Step 3. MMDocumentTypes.xml
    Add jspf to the MMDocumentTypes.xml files. Open this file in Notepad or Text Editor. Do not modify the Dreamweaver configuration files within Dreamweaver.
    There are three MMDocumentTypes.xml files to be modified: 
    C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration\DocumentTypes
    C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
    C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\DocumentTypes\
    Step 4. Restart Dreamweaver
    Hopefully the file type will now be recognized and appear with syntax highlighting.

  • Syntax highlighting in JSPs: How do they do that?

    In this forum, for example, if write code tags you write Java code that is automatically highlighted:// a comment
    public static void Main( String args[] )
       /* blah blah blah*/
    }which is great!
    I'd like to know how it's done, esp if there's a generic prcedure to it as I'm developing a site that will require syntax highlighting for several languages.
    Thanks JSP gurus!

    You can do this yourself. Create a table of key
    words. You can scan
    through the text to get the individual words. If they
    are in your
    table then add the bold tags. The trickiest part
    would be finding
    the end of comments, but this is not too difficult
    either.Yeah, this really isn't too difficult, having finished something myself. With comments, if you open with a //, you can simply consider everything between that and a newline as a comment, and with the /* comment, everything between it and a */ is also a comment.
    If all goes well, and you plan everything out, you should be able to place all necessary code formatting tags into the code with one iteration.

  • Nano syntax highlighting: catch-all syntax for configuration files

    After years of using nano, I only recently learned that it supports syntax coloring... (Why would they turn that off by default? ) Well, I thought I'll make up for it by making extra good use of it from now on...
    Unfortunately it didn't ship a highlighting syntax for the the kind of files that I use nano the most for: system configuration files.
    So I wrote my own, and after tweaking a bit here and there whenever I encountered a config file for which the highlighting wasn't satisfactory at first, I think the result is now good enough (screenshots below) that it's worth sharing with my fellow Arch users:
    Code & Instructions:
    Here is the syntax definition:
    # config file highlighting
    syntax "conf" "(\.(conf|config|cfg|cnf|rc|lst|list|defs|ini|desktop|mime|types|preset|cache|seat|service|htaccess)$|(^|/)(\w*crontab|mirrorlist|group|hosts|passwd|rpc|netconfig|shadow|fstab|inittab|inputrc|protocols|sudoers)$|conf.d/|.config/)"
    # default text
    color magenta "^.*$"
    # special values
    icolor brightblue "(^|\s|=)(default|true|false|on|off|yes|no)(\s|$)"
    # keys
    icolor cyan "^\s*(set\s+)?[A-Z0-9_\/\.\%\@+-]+\s*([:]|\>)"
    # commands
    color blue "^\s*set\s+\<"
    # punctuation
    color blue "[.]"
    # numbers
    color red "(^|\s|[[/:|<>(){}=,]|\])[-+]?[0-9](\.?[0-9])*%?($|\>)"
    # keys
    icolor cyan "^\s*(\$if )?([A-Z0-9_\/\.\%\@+-]|\s)+="
    # punctuation
    color blue "/"
    color brightwhite "(\]|[()<>[{},;:=])"
    color brightwhite "(^|\[|\{|\:)\s*-(\s|$)"
    # section headings
    icolor brightyellow "^\s*(\[([A-Z0-9_\.-]|\s)+\])+\s*$"
    color brightcyan "^\s*((Sub)?Section\s*(=|\>)|End(Sub)?Section\s*$)"
    color brightcyan "^\s*\$(end)?if(\s|$)"
    # URLs
    icolor green "\b(([A-Z]+://|www[.])[A-Z0-9/:#?&$=_\.\-]+)(\b|$| )"
    # XML-like tags
    icolor brightcyan "</?\w+((\s*\w+\s*=)?\s*("[^"]*"|'[^']*'|!?[A-Z0-9_:/]))*(\s*/)?>"
    # strings
    color yellow "\"(\\.|[^"])*\"" "'(\\.|[^'])*'"
    # comments
    color white "#.*$"
    color blue "^\s*##.*$"
    color white "^;.*$"
    color white start="<!--" end="-->"
    To install, save the above above code snippet as a file called conf.nanorc in the folder /usr/share/nano/ (or /usr/local/share/nano/ or similar if you feel strongly about the /usr <--> /usr/local separation), and then add the following to the end of the file /etc/nanorc:
    ## Configuration files (catch-all syntax)
    include "/usr/share/nano/conf.nanorc"
    Hints:
    The colors I chose look good (imo) with the terminal background and color settings that I use, but might not look good, or even readable, with yours, so simply change the color names in the code snippet to whatever you prefer - valid color names are:
    If you use a console with white background, you'll have to change at least the white color I chose for comments and punctuation.
    The first code line in the snippet includes a regular expression that defines for which file names this syntax highlighting should be used. Whenever you encounter a config file that is not matched by this, but you would still like to open it with syntax highlighting, you can manually select this syntax with nano's -Y switch, like so:
    nano -Y conf myConfigFile
    Technical Note:
    It's implemented as a single catch-all syntax, since nano chooses which syntax to apply based on the filename, and in the case of config files usually not much can be learned about the content format from the file name extension (.conf can by anything from flat key/value tuples to XML, .ini can be the official INI format or something else, etc...).
    This means that some compromises have been made, so with this highlighting syntax probably no config file looks 100% as good as a highlighting syntax that would be specifically optimized for one kind of config format, but all in all the vast majority of config files should look pretty good.
    Screenshots:
    /etc/rc.conf,  /etc/hosts:
    /etc/pacman.conf,  /etc/group:
    xorg.conf,  some .desktop file:
    httpd.conf (Apache config),  php.ini:
    More screenshots:
    /etc/fonts/fonts.conf (uses XML)
    /etc/inittab
    /etc/fstab
    /etc/inputrc
    /etc/mime.types
    /etc/protocols
    /etc/xinetd.conf
    See Also:
    nano syntax highlighting: GNU makefiles
    Update [2012-01-28]: Made some more improvements to the syntax definition (see post)
    Last edited by sas (2012-02-01 15:26:43)

    doug piston wrote:I deal with alot of .mk files and would love to see it there.
    You mean GNU makefiles?
    I'm afraid they might be out of scope for this generic config-file syntax.
    Logically they're not system config files, and technically they're a pretty specialized and complex format (different "types" of rules, rules spanning multiple lines, rules containing arbitrary Bash code, etc.).
    This is how an .mk file currently looks with this highlighting syntax:
    $ nano -Y conf /usr/lib/httpd/build/rules.mk
    And apart from highlighting variables of the form $$abc or $(abc), I'm not sure how much can be improved here without breaking the highlighting for more conventional config files.
    It would probably be better to create a specialized highlighting syntax just for .mk files.
    EDIT: I sat down and did just that, here's the result: nano syntax highlighting: GNU makefiles, and here is how the above makefile snipped looks with it:
    Last edited by sas (2012-02-01 15:18:52)

  • Syntax highlighting, autotabbing in Eclipse?

    Pardon, is there a way to make Eclipse do syntax highlighting and autoindentation a la Vi? I need to use Eclipse because I've got homework involving Java, and features beyond those of a basic text editor could come in handy, methinks.
    (I know the options should be in some obvious location, but I've managed to miss them somehow... :? )

    Er, it does that automatically from a default setup.
    Are you saying that you have no highlighting at all?
    How did you install Eclipse, via pacman or download it yourself from the website? I ask because a couple of years ago when Eclipse was starting to become popular, I downloaded the Eclipse platform, only to find that I got the base system, without any Java IDE features. You see, the language support is in the form of additional plugins. That's why Eclipse can in fact be a Java, Python or C++ IDE, etc, providing someone has written the plugings to make it so.
    Nowadays, the default download (Eclipse SDK) is bundled with the Java dev stuff. For me, it has always worked fine, out of the box. No need to enable highlighting or indenting.

  • [self-SOLVED]vim + lilypond syntax highlighting

    I'm trying to get vim to use syntax highlighting in lilypond files. Apparently lilypond comes with the necessary files, but I have not been able to make vim find them (?). I am not very experienced with vi(m), so there might be something wrong with my setup.
    I have, of course, both vim and lilypond installed. The files for lilypond syntax highlighting are in subdirectories of /usr/share/lilypond/2.12.3/vim/. Vim syntax highlighting works for other files, such as C++, HTML, etc., so no problem there. My ~/.vimrc file contains
    set runtimepath+=/usr/share/lilypond/2.12.3/vim/
    as per instruction given in http://lilypond.org/doc/v2.12/Documenta … m/Vim-mode (and the path is correctly modified). But when I open a lilypond file (with the correct .ly suffix) all I get is black and white. What's the problem?
    [EDIT: Oh heck, nevermind! Apparently I was getting too tired to read instructions properly. Was missing the ~/.vim/filetype.vim file described in the above link.]
    Last edited by lotuskip (2010-04-12 18:33:42)

    You're right about it being overridden.  This change should be able to be placed in ~/.vimrc though.
    Well  that was foolish - I should have read the comments right below in that file.  It says exactly how to set it in vimrc.  I've now added the following to my ~/.vimrc and this is completely solved without modifying the /usr/... file.
    let g:tex_flavor = "tex"
    Last edited by Trilby (2013-03-29 16:11:26)

  • How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

    How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
    I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems.  When we finally decided to cut over to SBS 2008, that’s when everything went to hell.  I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box.  During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations.  There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb.  After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
    I have attempted in this white paper to detail the steps to assist others who may be in a similar situation.  I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine.  BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true.  Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box.  After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging.  Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
    From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer.  The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe!  By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost.  Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded.  At any rate, take your time and follow the steps to achieve a successful installation. 
    PRE-INSTALLATION TASKS
    Back Up SBS
    It’s always a good practice to backup your server before deploying any kind of major system changes.  Although this step is optional, I recommend it in case you need to restore your server for any reason.  Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone.  You will need a full backup with system recovery information to restore.  Here are the basic steps:
    Click: Start > Programs > Administrative Tools.  Right-click “Windows Server Backup” and choose “Run as administrator”.
    Click “Backup Once” under Actions in the right-hand pane.
    Choose the “Different Options” radio button under Backup Options.
    Choose the “Custom” radio button.  What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
    Select the “SYSTEM (C)” checkbox, uncheck any others.  Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
    Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups.  You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images.  Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency.  Also, make sure the “Verify after writing (recommended)” checkbox is selected.
    Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product.  If like me you rely solely on SBS for your backups, choose the full backup option.
    Confirm everything and click “Backup”.  This process may take several hours depending on the size of your system.
    Verify ISAPI Filters:
    In IIS Manager, double-click the server instance in the left-hand pane.
    In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS.  If it’s set up correctly you should see two entries:
    IsapiFilterModule              %windir%\System32\inetsrv\filter.dll
    IsapiModule                        %windir%\System32\inetsrv\isapi.dll
    If either of these modules are missing, you will need to re-install these (google for a solution).
    Set Up Development Environment
    Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\).  For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
    Copy and paste your CFML files and directories into the new DEV root Web directory.  This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders. 
    Open IIS Manager and double-click the server instance in the left hand pane.  Expand the “Sites” folder.  Right-click the Sites folder and select “Add Web Site”.
    Enter a name in the “Site Name” box (e.g., “test-site”).  You will notice that the system will automatically create a corresponding Application Pool with the same name.  NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
    Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
    Don’t worry about testing the connection.  If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV).  Don’t worry about this for the time being.
    Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”).  Click “OK”.
    Configure Application Pools for Installation
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”.  NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
    Modify the application.host.config File for 64-Bitness
    Click: Start > Programs > Accessories.  Right-click “Notepad” and choose “Run as administrator”.
    Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
    Do a search and change this one line from:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
    To this:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
    Restart the IIS Admin service.
    Set HTTP Compression
    According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
    Click: Start > Programs > Accessories.  Right-click “Command Prompt” and choose “Run as administrator”.
    At the command prompt, change directory to intetsrv by typing: cd inetsrv
    Run the following command:
    C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
    This will turn off HTTP compression for all sites in IIS.
    In IIS Manager, double-click the server instance in the left-hand pane.  Double-click the “Compression” icon in the IIS section of the center pane.
    Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Restart the IIS Admin service.  This should enable compression and coldfusion to work at the same time.
    NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
    C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
    INSTALLATION TASKS
    Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
    Right-click the file and select “Run as administrator”.
    Accept the terms of the License Agreement.
    If you have an Enterprise license, enter it.  For our purposes, just click the “Developer Edition” checkbox.
    Select “Server configuration” – the default radio button.
    I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”.  It should be fine, particularly if you install documentation.  My preference was to keep the install as plain vanilla as possible.
    Select the directory path for Coldfusion to install into – default is :C\Coldfusion
    THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS.  Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button.  Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”.  Hit “OK”.
    Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”).  Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”).  The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
    Enter an Administrator password.
    Choose to Enable RDS, or not.  I enable this by preference but it is not required.  This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely.  Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
    Confirm everything to kick off the install.
    If all goes well you should see a message at the end stating that the install was successful.  I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install.  NOTE: we will open it a different way during the post-installation tasks.  The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
    POST-INSTALLATION TASKS
    Verify CF Installation:
    The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8.  The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory.  Our CFIDE files, however, are located within: D:\DEV.
    To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
    This should bring up the Coldfusion Administrator Login screen.  Enter in the Administrator password you created during the install to log in and configure your application server.
    Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
    Fix Application Pool Defaults to Re-enable SBS Web Applications:
    At this point, Coldfusion Administrator and your test CMFL Web site should be working properly.  The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start.  Fortunately, this is easily remedied by performing the following steps:
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time.  This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.).  There is no need to restart IIS.
    Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
    In IIS click to highlight the application pool for your new site (e.g., “test-site”).  In the right-hand pane, click “Advanced Settings”.  Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
    Lastly, jump up and down for joy!  Hopefully now, everything is working.  Best of luck!! ..Paul D (MCP).

    First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
    Second, this is probably your problem right here:
    http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
    In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
    As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
    Dave Watts, CTO, Fig Leaf Software

  • How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

    Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update  to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
    The Background/history
    I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8.  I created a single partitioned drive to install windows 7 professional 64 bit.  The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in.... 
    The installation of Windows 7 Pro 64-bit
    So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black....  in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
    The problem, re-emphasized :  I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files?  not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run...  Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver  without having been able to complete the windows 7 installation because the monitor goes and stays black????
    This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
    Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
    ---I've been told to install the osx dvd and run "setup.exe"  - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
    ---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/  for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
    ---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

    hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something?  if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean?  it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
    Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this?  just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600?  (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
    So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
         1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
         2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

  • Syntax highlighting not working with label on if statement in fortran in Visual studio 2010

    I am having a difficult time in figuring out the syntax highlighting in Visual studio. I am using fortran code and there are labels in if statements as follows: 
                if_2003: IF (FRAC_PBED(NNSED,L).LT.0.0.AND.
         +                   FRAC_PBED(NNSED,L).GT.SMALL_NEG_NO) THEN
                  FRAC_PBED(NNSED,L) = 0.0
           TSED_PBED(1,NNSED,L) = 0.0
         END IF if_2003
    So the problem I am having is when I click on the `if` next to label `if_2003`, then I cannot use `CTRL + ]` to move to the ending `if`. If there is no label before `if`, then the shortcut is working fine. I don't know what I could do so that it would start
    behaving as it is supposed to. 
    In the contrary, when I have do loop as follows: 
        do_410: DO NNSED=1,NSTD
             D50AVG(L) = D50AVG(L) + 
             +                 FRAC_ALAY_SURF(NNSED,L)*D50(NNSED)/10000.  ! BASED ON BED COMPOSITION
        C
             TSED_ALAY_SURF(2,NNSED,L)=TSED_ALAY_SURF(1,NNSED,L)
             TSED_ALAY_BUFF(2,NNSED,L)=TSED_ALAY_BUFF(1,NNSED,L)
             TSED_PBED(2,NNSED,L)=TSED_PBED(1,NNSED,L)
                  END DO do_410
    I can move to the end/start of `do` loop using the keyboard shortcut `CTRL + ]`. Any suggestions is appreciated.  
    Regards, Jdbaba

    Hello Jdbaba,
    Based on my research, your post is related to use fortran in Visual Studio:https://software.intel.com/en-us/articles/intel-math-kernel-library-intel-mkl-for-windows-build-intel-mkl-program-with-intel-fortran-in-microsoft-visual-studio This
    technology is provided by Intel. So the question should be consulted on Intel fortran related forum. Not Visual Studio Setup forum, setup forum is about install/uninstall Visual Studio.
    Best regards,  
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to Install 9i real application clusters on a PC!

    How to install and deploy Oracle Real Application Clusters on a single Linux
    server with a minimal configuration (less than $1000 worth of harware):
    First of all to install Oracle cluster database you DON'T HAVE to have a cluster, but a
    single PC may do as well (of course thi kind of installation will not be of
    much use for a production DB). A minimal server that I HAVE TESTED is: Celeron 750 MhZ,
    512 Mb of RAM, 2 IDE HD, Linux Suse 7.2
    This document contains the steps needed to deploy a working Oracle 9i Database with a
    minimal comment. For a complete discussion refer to Oracle documentation, namely:
    Oracle 9i administrator's reference part number A90347-02
    Oracle 9i Linux release notes part number A90356-01
    Oracle 9i Real Application Clusters Administration part numebr A89869-01
    1) set up the partitions to user for Oracle software and the ones to use as raw devices
    for the cluster DB. Soppose you want to you use an HD mounted as the 3rd IDE device
    (/dev/hdc) for the cluster DB. Then you have to partition it with fdisk with a large
    extended partition (say hdc1). Create a large number of logical partitions inside hdc1
    (say hdc5 till hdc20) of about 300 Mb in size (all of the same size for simplicity).
    2) Real application clusters wants to store the DB strutures into raw devices or a
    cluster filesystem. Create the raw devices using the following command (as superuser):
    raw /dev/raw1 /dev/hdc5
    raw /dev/raw2 /dev/hdc6 ... etc till /dev/hdc20
    you will need to repeat these steps after every boot
    3) Set up the Oracle user (already done with the Suse distribution), environment variables
    and mount point.
    Install Oracle software enterprise edition
    4) Complete the installation with a custom install of the real application cluster option.
    This will add a directory called oracm under your oracle home, which contains the
    cluster manager software
    5) edit $ORACLE_HOME/oracm/admin/nmcfg.ora, it contains 3 lines for the set-up of the
    cluster manager sofware:
    DefinedNodes=localhost
    CmDiskFiles=/dev/raw2
    CmHostName=localhost
    6) edit /var/opt/oracle/srvConfig.loc. It contains 1 line with the location of a raw device
    used to sync the cluster nodes:
    srvconfig_loc=/dev/raw1
    7) start the cluster manager software (as superuser):
    $ORACLE_HOME/oracm/bin/ocmstart.sh
    8) as the oracle user start the global cache service:
    gsd
    9) you can now create a cluster db. to use the configuration assistant you need to set
    an extra environment variable:
    export THREADS_FLAG=native
    10) start the configuration assistant: dbca
    expect some errors in the script the dbca generates, best is to review them before
    execution
    11) after the db creation you'll be able to start two instances on the same DB,
    which means you will have a cluster DB!
    12) the environment variable ORACLE_SID will determine the instance to which you can
    connect by means of a special syntax: SID.parameter=value
    this is used for example for paramters like instance_number, thread, etc
    also the parameter cluster_database must be set to true
    All these problems are normaly handled by the dbca.
    Have fun,
    Luca Canali
    OCP-DBA

    RedHat 7.1 with the some configuration I run a production 9.0.1
    database: Compaq Proliant Hardware with a RA4100 storage.
    The script created from the dbca seems fine, but the dbca give
    me the
    some error I get from:
    srvconfig -init
    [...]stop all daemons and oracle programs on both machines, then
    start only $ORACLE_HOME/oracm/bin/ocmstart.sh,
    then run the line
    srvconfig -init
    you can check it by running
    srvconfig -version
    it should output something like "9.0.0.0.0"
    before running dbca, make sure ocmstart.sh and gsd are
    running on both machines ("lsnodes -v" should putput sbshadow1
    and dbshadow2).
    BTW - I cant run clusca... Can somenome give a sample nmcfg.ora,
    just to check my parameters? for dbshadow1:
    DefinedNodes=dbshadow1 dbshadow2
    CmDiskFiles=/dev/raw/raw2
    CmHostName=dbshadow1
    for dbshadow2:
    DefinedNodes=dbshadow1 dbshadow2
    CmDiskFiles=/dev/raw/raw2
    CmHostName=dbshadow2
    Saludos
    --Marcos.
    Ps: can you contact me by e-mail? i have some questions regarding
    your HW

  • Forgotten how to install Boot Camp

    I had to reinstall Windows 7 64-bit because I needed more space for Mac OS X. After reinstallation, which went perfectly, I have forgotten how to install Boot Camp. This MBP 3.1 will not install Boot Camp from the Snow DVD because it says that 64-bit mode isn’t supported (not true). I installed several components by hand. All I remember from the old style of bulletin boards was to copy the Windows contents of the DVD on to the desktop, then to use SuperOrca to modify the ISO. I don’t, however, remember the exact details of what was supposed to be modified and how to do it. This is also supposed to prevent the error of Apple Software Update not recognizing the installation of BC 3.2 after it was done.
    I can’t find the old instructions with the new format, so any help is appreciated. Peace.

    Ok do this...
    Insert your Windows Bootcamp Drivers Disc (aka OSX Install disc that came with your computer).
    When you see the prompt from Windows Explorer, instead of clicking the "setup.exe" option scroll down and click in the Explore/view files (or something like that, don't remember.)
    Look into the folder labeled as Bootcamp, then click another folder called "drivers", inside there should be another folder labeled as "Apple".
    Inside, there should be a file labeled "bootcamp64.msi".
    Single click the file (bootcamp64.msi) and once it's highlighted, do a right click ( to do you must do the following key combo Shift+F10)
    A right click menu should appear. One of the options is labeled as "Troubleshoot Compatibility".
    A dialog should appear, click on the "Start Program" option when it becomes available.
    The Bootcamp Driver Wizard should now appear. Follow the prompts of Bootcamp Assistant as always.
    Drivers will install automatically.
    Reboot.
    Welcome to Windows 7 64-bit on your now Dual-Citizen Mac...
    Report back with your results...

Maybe you are looking for

  • ISight not showing up in System Profiler

    I have tried SMC reset, safeboot, and many other things to try to get iSight to work with my Macbook Pro. It does not show up in the System Profiler. Any ideas?

  • Question about book chapter

    Hi, I know this is probably a long shot but here is the scenario: I design book interiors and each chapter opening page has a specific master page applied to it, the trouble is when a page shifts the master page doesn't follow which means I have to g

  • Help with rewriting the query for faster execution.

    Hello Everybody, We are on Version Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi I am trying to get data from tab1 where col8 is equal to ' ' at the same time If we 2 or 3 records matched on col1 and col2 with different dates(col3)

  • Imported Archive

    Hi, Can anyone tell me where does XI actually make a copy of the Imported Archive? eg. the jar aii_map_api.jar is available @ usr/sap/X01/DVEBMGSOO/j2ee/cluster/server0/apps/sap.com/com.sap.xi.services on the XI server. So there must be a location wh

  • When i try to use lighting effects it's just closing down Cs6

    YEah every time i try to use the lighting effect it just says straight "The problem has stopped working http://screensnapr.com/e/ht6aPT.jpg Please help me!