How to install TCS for just one userHere'sm

Here's my situation: I have Windows 7 with two user accounts.
On user account 1 (User1) I installed TCS 1.0. Everything went just fine. However, the installation is available to all users on the machine.
Along comes TCS 2.0, which I want to install on User2 without removing User1 (it is not an upgrade; it's the full version). I suspect that doing so will REPLACE TCS 1.0, as you can't have both installed for the same user.
The TCS 2.0 installer never offered me the option of installing for just User2. I assume this is because it detected the existing TCS 1.0 installation, which is for all users.
So my plan was to UNINSTALL TSC 1.0 and start with a clean slate. As in, install TCS 1.0 on User1 and TCS 2.0 on User2. So I uninstalled TCS 1.0.
As I don't have the TCS 1.0 disks handy, I thought I'd start with TCS 2.0 on User2. When I run the installer, it STILL doesn't give me the option to install only on the User2 account!
Is there some way to FORCE the installation to be just for a single user?

Update: I just installed FrameMaker 8 on a machine that already has TCS 2.0 (with FrameMaker 9) on it. It seems to be working just fine. I've opened both versions of FM and made PDFs from both.
One thing: Acrobat is compaining that something isn't installed correctly -- something to do with the 3D part. I don't use that so it's not a problem for me. I don't know if it's related to my installation situation.
e
d

Similar Messages

  • Urgent: I just bought 3 anual pre paid memberships for adobe creative cloud, I need to know how to install each membership in one different computers.

    I just bought 3 anual pre paid memberships for adobe creative cloud, I need to know how to install each membership in one different computers.

    VivianSchumann, I have replied to your query in Urgent: I just bought 3 anual pre paid memberships for adobe creative cloud, with the same Adobe ID.
    Regards
    Rajshree

  • How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back

    How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back in and reentered it but that doesnt work.

    Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
    Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
    Hopefully this will get your messages sending/receiving to each other.

  • How do I make a transpose/octave button for just one instrument in a split?

    I work in mainstage 2.2.2 with patches that are using splits, and I want to make an octave button for just one instruments in a patch. Suggestions? (If I press the octave button in my keyboard, the whole split point moves, no good...)
    Benny

    An octave button for just one instrument will work for some instruments. EVB3, ESX24, ESM and a few others can be assigned. However I was unable to make it work with EVP88 and ES2. Try this example: in layout mode set up a button(or buttons) on your controller keyboard for changing octaves. In edit mode add a channel strip and select an ESX24 instrument. Select the screen control button you want to assign in the workspace. In the screen control inspector, select the mappings tab. The list below will say unmapped. Double-click on it. Select the instrument in the list. Another list to the right will appear. Select ESX24 (Sampler). In the column to the right, select the pitch folder, then select transpose. To the right, you'll see saved value, button on and button off values. This should get you started. Some of the instruments have different menus, so they'll be a little different. Have fun with it.

  • How do I make a transpose button for just one instrument in a split? (mainstage)

    I work in mainstage 2.2.2 with patches using splits and I want to make an octave button for just one instruments in a patch. Suggestions?
    Benny

    Depending on your virtual instrument you can assign octave to a MIDI control. If you assign all of them to the same control on every track then that would be the effect, but like I said before, it really depends on which instruments you use.

  • HT204053 I have 2 Apple ID's how do I delete 1 of them? Or how can I make them just one?

    I have 2 Apple ID's how do I delete 1 of them? Or how can I make them just one?

    To add to the above...
    From Here   http://support.apple.com/kb/HE37
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.

  • How to change font in just one column of JTable

    I have a table with 4 column.
    I want to have Courier font in column number 2, and Arial in columns number 1, 3 and 4.
    With:
    table.setFont(new Font("Courier New", Font.PLAIN, 12));
    I can set fonts in all columns but how to set font in just one column.
    Thanks
    Srdan

    Hi,
    there are 2 methods of JTable where every rendering resp. editing component "comes" through - prepareRenderer(...) and prepareEditor(....) - by overwriting this methods and calling its super method first you get the component and can manipulate it before you return it. This component is exactly that, what is used for rendering resp. editing afterwards.
    greetings Marsian

  • How to install Workshop for WebLogic and WebLogic Portal?

    Hi All,
    I am new to Weblogic Portal. I would like to start learning Oracle Weblogic Portals..
    Can anyone please guide me, how to install Workshop for WebLogic and WebLogic Portal?
    As per the ""Tutorials – Getting Started with WebLogic Portal"" (http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/setup_dev_env.html)
    we need to install the Workshop for WebLogic and WebLogic Portal.
    Please suggest me where should i get the required environments/IDE?
    Thanks,
    Harish.

    Hi Harish
    1. If this is your first time with Weblogic Portal, I would recommend to download the latest Weblogic Portal Software Rel 10.3.2 from this bottom link. Check Accept Radio button, for windows download windows installer. Its about 1 GB file. This software includes Eclipse IDE, Weblogic Server and Weblogic Portal.
    http://www.oracle.com/technology/software/products/wlp/index.html
    2. During the installation process, make sure at one point you select Custom mode (NOT default Typical mode). In next following screens you will see all bundles checked EXCEPT for Samples. So make sure you check Samples Check box both under Weblogic Server and Weblogic Portal. Then proceed. This will install full Weblogic Workshop (Eclipse IDE), Weblogic Server and Weblogic Portal. This is the good installation package. Also it will install samples for Portal and Server. If you select all default typical mode, it will NOT install samples. You can install samples later on also, but its good at installation time itself you select custom and check Samples also.
    3. WLP 10.3.2 uses Eclipse IDE. If you are familiar with Eclipse IDE this should be helpful. Otherwise also, its ok.
    4. For learning WLP, in Eclipse IDE, you need to create Portal EAR Project, then Portal Web Project. Inside portal web project create simple jsp hello world portlets and a simple portal.
    5. For Deploying and Testing Portal application you need to create Portal Domain using config wizard. You can see this from Start -> Programs -> Oracle Weblogic Portal shortcut -> Weblogic Server -> Tools -> Configuration Wizard.
    6. You can start Workshop IDE from Start -> Program Files -> Oracle Weblogic Portal ...-> Eclipse For Weblogic 10.3.2
    Here are the links for quick start guide for portal development. Please do refer them.
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/tutorials/index.html
    http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/quickstart/newproject.html
    HTH
    Ravi Jegga

  • Spool printing takes a long time for just one user

    Hello,
    Could someone please guide on what could be the reason that spool printing takes a long time for just one user ?
    I've monitored all the spool processes through SM50, and I've found that a very long time elapses before the printing job appears in one of the four spool processes.
    Thanks in advance.
    Reda

    Hi,
    very long time elapses before the printing job appears in one of the four spool processes.
    can u check the trace file(Red color error) of that spool process. Also can u see if there are any system logs in SM21 related to that spool request.
    Also see how many pages the user is giving print @ 1 shot. Suppose if the printer to whcih the user is giving print is a network printer, see the network response time.
    Have u tried to ask the same user to give print to some other printer. Also have u asked some other user to print to that problematic printer. Check the responses under this scenario also.
    Regards,
    Ravi

  • Does Apple allow a price reduction for just one week?

    Does Apple allow a price reduction for just one week?
    I can't seem to get a definitive answer from their web site.
    A one week Spring Sale for two books ~ it it OK with Apple?
    Thanks
    Bruce

    Thanks very much vinnvg ~ I was just checking in case Apple had a policy about not allowing a temporary price cut.
    Thanks for the reminder on how to do it.
    Bruce

  • Anonymous access for just one page

    Does anybody knows how can i enable anonymous access for just one page, other pages must be available for only logged in users.

    Actually it is "LightHouse Pro" project. And I don't understand some things in it. It Has a UserControl with a query that just check credentials and returns bool value if credentials are right. But i can't find the way it defines whether i need to secure page or not.

  • Notifications for just one email account?

    hi all.
    I have many email accounts, including one that was set up to push time-sensitive email messages to me.
    I don't need notifications for any of the accounts except for the time-sensitive account (which is a gmail push account).
    does anyone know how to enable Mail Notifications (Lock Screen and Alerts) for just one email account?
    cheers,
    Gregory

    You can't

  • Import for just one table fails....

    Hi,
    On production server i have declared a db user , let's call him PRD_USER, with default tablespace PRD_TBL.
    On development server i have declared a db user , let's call him PRD_USER, with default tablespace DEV_TBL.
    On production server, i use the exp db utility in order to do the import as:
    imp system/manager from user=PRD_USER touser=PRD_USER ignore=Y file_name ='....' log='....'.
    The import succeeds for about 25 tables and indexes and constraints but it fails for just one table with error : {i do not remember the ORA- error, and i have not access to it right now} tablespace DEV_TBL does not exist.
    Of course this tablespace does not exist on production env. but how does this problem arise since the default tablespace for this user is not DEV_TBL but PRD_TBL...????
    Do you have the slightest idea what may be the cause and how can i overcome this problem during import...???{Note: I gave a temporary solution... taking the sql creation script of the table leaving out the reference of tablespace 'DEV_TBL'}.
    Both servers run exactly the same version of DB..
    Note : I use DB 10g v.2
    Thank you,
    Sim

    HI,
    "If the table has Partitions, the import is attempting to create the Partitions (in the CREATE TABLE statement) on the original tablespace."
    The table is not partitioned.....
    I'll check for the second characteristic...(LOB-column on Monday)
    Thank you,
    Sim

  • How do I back up just one screen?

    Seems I always have to get back to HOME and start fresh.  How can I move back just ONE SCREEN for any application within iPhone?
    Thanks in advance.

    Look at the top left corner of the app screen.  Is there an option to go back to the previous screen?
    Give me an example of an app where this happens.

  • How to install extension for all users?

    How to install extensions for all users? I'am using Windows
    Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
    administrator" doens't work.

    Xych wrote:
    > How to install extensions for all users? I'am using
    Windows Vista sp1 x64 and Adobe Extension Manager 2.0.274. "Run as
    administrator" doens't work.
    You may have to log in as the Administrator user rather than
    "run as adminstrator".
    Beyond that, are there really enough users on a system that
    they can't install the extension(s) they need themselves?
    Danilo Celic
    |
    http://blog.extensioneering.com/
    | WebAssist Extensioneer
    | Adobe Community Expert

Maybe you are looking for