How to install the extra driver

hi all,
i have developed one application and my application is working fine. Now i required one driver for this application which is not available in NI. i am having this driver CD .Is it possible to install this extra driver (which is available in CD) with my application installer
thanks and regards
manasi

On the Advanced page of the installer you can configure the Launch Executable After Installation to call your third party installer. More information can be found in the LabVIEW Help.

Similar Messages

How to install the video driver on solaris?

I'm trying to install my video card on solaris but i don't know how to start the aplication that configure this feature on CDE.....
Thanks......

Boot from Solaris partition and press "ESC" key to enter in to Device Configuration Assistant and add it your video device driver.
Hope it helps.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developer/support

How to install the extra version of Lightroom with cloud subscription

I already own lightroom 5 and wondering when i purchase the cloud for photographers and receive the lightroom 5 with that, how do i go about the installation since i already have a working version. When i updated from lr 4 to lr 5, it automatically brought over my catalogs and presets. Will the cc version do that or do i have to manually move everything

A few weeks ago when I went through this, I had LR5 installed from my LR4 upgrade, then when the CC-Manager program offered the CC-delivered version, I just uninstalled my old LR5 and installed the CC-delivered version, which is the same thing, just a new license key, so all my presets and preferences, which reside in the user-library folders, were immediately used, again, since only the program files were re-installed.
Since that time, I’ve seen one person saying they weren’t being offered the CC-delivered version of LR5 apparently because they already had a non-CC-delivered LR5 installed. I don’t know if the offering was just delayed as things percolated through the cloud, or if the CC Manager app is different, now, and doesn’t offer LR5 if you already have a perpetual-license version installed.
I guess what I’d recommend is not uninstalling your old LR5 until you are offered one via the CC-Manager program, and then it should work to uninstall the perpetual-license one and re-install the CC-delivered licensed version.

How to install the bluetooth driver in windows 8

my bluetooth is not work

Hi hesham_434, and welcome to the HP Forums!
I understand that you are having an issue installing a Bluetooth on your computer. I will try my best to assist you with this. To better guide you, could you please tell me the model number of your computer and the operating system that is running on it. Here are a couple of guides in case you need them.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
I am also including these documents in hopes that they will resolve your Bluetooth issue.
Understanding Bluetooth Wireless Technology
Using Bluetooth Devices (Windows 8)
Fixing Bluetooth Problems
I hope this information helps, please let me know how it goes.
Thank you and have a great day!
I worked on behalf of HP.

How install the LAN driver for Satellite Pro A120

Actually, my problem is that i didnt know how to install the lan driver on my Satellite Pro A120 to connect throug the net.
The issue that theres no installation to do to complete the install.
And theres other issue that i need the Ethernet Controller
My laptop was vista OS installed, But i change it and put Windows XP instead
Plz help me

Thats very easy to install the LAN driver.
On the Toshiba website you can search for it:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download drivers
Select the right notebook. In your case its the Satellite Pro => Satellite Pro A Series => Satellite Pro A120.
And then choose at operating system Windows XP and at Driver type LAN Driver.
Click on search and you will get the right driver.
Download and install it. How this works did Jimi said.

I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

What exactly are you trying to do? PVRs are for recording from TV not computers.
Either way, if it's complaining about DOS mode, it's Windows oriented software and not Mac compatible.

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to know the model of my Dv6 and how to install switchable graphics driver

hi,
I have a HP pavilion dv6 but I don't know what model is to download the drivers.
Here are the specs:
(this was purchase in Europe Portugal)
- Intel core I5 M480 2.67Ghz
- 500GB HDD 5600rpm
- HD 6650
- 4GB RAM
- Finger print reader
- 3x USB
-Dvd Rom
- x1 SD CARD reader
- x1 esata
- x1 HDMI
- x1 Vga port
- Camera HP trueVision
- Dobly Advance Audio ALTEC lansing
- Win7 Home Prem 64bit
I need to install the AMD 6650 Driver with the switchable drivers options currently it only detects the Intel HD Graphics, installing the latest driver from AMD for the mobil 6650 will not work it doesn't dettect the graphics card.
How can I know my laptop model ? and how to install the switchable and AMD drivers.. the laptop came with no CDs.
Thank you,
Arthur

Get your full Model number or Product number from the Service Tag attached to bottom of laptop (may be under battery)
How Do I Find My Model Number or Product Number
Once you have the info, use the button at top of this page titled "Support", then click "Download drivers" from the menu. Enter your Product Number. After entering PN click 'Go". On the next page use the dropdown menu to select your Operating System, click Next. A list will populate with drivers/software.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hi, how do you install the extra alpha transitions?

I have just upgraded tot FCP 7.
How do you install the extra alpha transitions?
thanks
Frank

They're not extra transitions. They're content to use with the alpha transition. You import the content into your project Do you know how alpha transitions work? Read the section in the manual on them.

How to install the driver of the 'SCSI and RAID Host Controller'

Hi,
I have two Windows XP(32Bit) installations:
•Windows XP SP2(32Bit) which is old and it seems as if it is infected by some viruses.
•I have installed another fresh clean Windows XP(32Bit) SP3. However, I have found that there is no category named with ''SCSI and RAID Host Controller'. However, when checking out the old version of Windows XP, I found 'SCSI and RAID Host Controller'
is there. (Screen shot below)
The new Windows XP(32Bit) SP3, there is no 'SCSI and RAID Host Controller'
My motherboard is:
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM.
]I am seeing that most computer doesn't has the scsi / raid controller . in the old Windows XP on my computer that SCSI and RAID controller exists, and it it has not a yellow mark on it.
When I installed a new windwos XP 32Bit SP3, no SCSI/RAID in divice manager .
My computer sound on new Windows XP doesn't work , however, on old Windows XP SP2 works well. I have a buitl-in sound card. SCSI and RAID controller category in the device manager on the old Windows xp SP2 is realted to sound card,I don't think.
Thus, What drivers would let the 'SCSI and RAID Host Controller' added in the device manager?
A man should convert his anger and sadness into strength to continue living in this life.

If you open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on the pcb somewhere. You should also normally see this information on the first POST screen when you turn on the PC.
Otherwise Google "775i65G" like I did.
Here are the driver downloads (assuming it is an Asrock 775i65G R2.0 and not an R3.0)
http://www.asrock.com/mb/Intel/775i65G%20R2.0/?cat=Download&os=XP
You should install the inf driver first. Hopefully after you do that you will see your desired listing in Device Manager.
With regard to the AMR driver and the HDMR driver, you can find some information about these here :
http://en.wikipedia.org/wiki/Audio/modem_riser
Unless you actually have something plugged into these risers, it is probably not necessary to install the drivers.
However, the drivers for the integrated C-Media audio chip and the Realtek Lan chip may prove useful.
It looks like the motherboard has integrated video but if you are using a graphics card it will not normally be necessary to install the VGA driver.
You can download both the manual and the installation guide here
http://www.asrock.com/mb/Intel/775i65G/?cat=Manual
And if "SCSI and RAID Host Controller" is still not shown in Device Manager, don't worry - because these functions are not supported by your motherboard (again assuming it is an Asrock 775i65G)
Thanks a lot,
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed
well, and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and
RAID Host Controller in device manager.
First: Why did the CPUz, specy didn't detect motherboard name, and only detect the model. IF I need to open the case and shine a light on the motherboard you can usually see both the manufacturers name and the model printed on
the pcb somewhere, then what benfit would be there from hardware detection software?
Second: Yes, my motherboard has integrated video, and integrated audio card
However, this doesn't mean that I don't need to install them since the Vidoe controller is not properly installed (it is a default VGA ) Also, Multimedia audio controller is not functiong at all.
Finally: if And if "SCSI and RAID Host Controller" is still not shown in Device Manager in Windows XP SP3, because these functions are not supported by my motherboard, then why is 'SCSI and RAID Host
Controller' installed/shown in the device manger in Windows XP SP2 on the same PC???
A man should convert his anger and sadness into strength to continue living in this life.

My HD died and the Apple store installed the new drive and upgraded me to Mavericks. I no longer have iPhoto which I miss very much. How do I get it back and do I need it or do my pics go somewhere else? help

My Hard Drive died and when the Apple store installed the new drive they upgraded me to Mavericks. I no longer had iPhoto. Where do I get iPhoto, do I need it and where are my pictures going when they import??? Help I'm SO confused and frustrated. Thank you.

You need two items
1 - the iPhoto application -
You install it from the App Store
2 - and the iPhoto library - restore form your backup from just before the disk died - no importing involved - simply restore and launch iPhoto and it will look in the pictures folder and open it and it will be exactly the way it was when you made the backup
As to your question Do you need it - No you can manage your photos anyway you please - iPhoto is a good way but not required - you can use any software you want and you can import photos using image Capture (in your applications folder) or any other software you choose - If you use iPhoto then they by default going your iPhoto library - if you use other software then they go where you say to put them
LN

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

How to install the same copy of creative suite on the second computer?

Basically I am using a Macbook Pro and upgraded my hard disk. A
After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
Download and Installation Help -
https://helpx.adobe.com/download-install.html

How to install the Sample Apps in Hyperion Financial Management 11.1.2.2?

Hi,
Could please anybody tell me how to install the Sample Applications in Hyperion Financial Management 11.1.2.2?
The following is written in the Administration guide:
If you did not install the sample files, you can obtain them by reinstalling Financial Management
and selecting the Sample Applications component.
I cannot find the “Sample Applications component” among components during installation process.
There are only “Financial Management ADM driver”, “Financial Management Web Application” and “Financial Management: services”.
Hope this helps,
Thank you,
Vadim

After you install the sample application, all of the application extracts can be found under the below location.
Oracle_Home\Middleware\EPMSystem11R1\products\FinancialManagement\Sample Apps and Starter Kits\Sample Apps

How to install the extra driver

Similar Messages

Maybe you are looking for