How to install the HP 1010 laserjet printer in windows 7 (64 bit) os pc?

I have windows 7 (64 bit) OS pc and i bought HP laserjet 1010 printer very early when i used to use windows XP. Now i got problem. I cannot find its driver for windows7 even you said that the is no driver for windows7. Then what should i do? My printer may be useless. I cannot change the OS of my pc as i am friendly with windows7. Please help me in this regard.

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

Similar Messages

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

Can someone help me with installing the latest version of iTunes for Windows 7 64 bit Home Premium?

Latest version of iTunes for Windows 7 64 bit Home Premium downloads just fine. But, fails to install.
"Unblocked and gave all permissions." Still, no go.
I see by reading the other posts on this forum that I am not alone. Any help?
Frustrated!

Ok...This was very odd. I left the installation program, in what I considered a frozen state on screen. After about 30 mins, to my surprise, It installed! I'm not computer literate, so, I don't know what to say. But, to just WAIT for it to respond! Good Luck!

Can't install the Toshiba HD DVD Player for Windows 7 - 64 Bit

Notebook: Toshiba Qosmio G40 with windows 7 Ultimate 64 Bit
I can't install the HD DVD Player Driver from Toshiba for Windows 7 - 64 Bit 4.60.03 from 30/11/09 !
The installation will be cancel with information that the software can not be installed on this system.

Problem is that this file you have downloaded is not the player but just an update.
Usually you should be able to install player designed for Vista and later install this upgrade but, as I can see, Toshiba doesnt offer HD DVD player for Vista 64-bit.
I presume your notebook was delivered with Vista 32-bit only. Am I right about that?

Please tell me how to install the new version of itunes on windows 7. Every time I attempt, I get an error at the very end of installation.

The message says: "Service 'Apple Mobile Deice' (Apple Mobile Device) failed to start. Verify that you have the sufficient priveleges to start system services". Please help.

"The file "iTunes Library.itl" cannot be read becuase it was created by a newer version of iTunes".
I believe we're still making progress. Let's try the following user tip with the new error message:
Empty/corrupt iTunes library after upgrade/crash

Installing the Thrustmaster F-16 FLCS under Windows Vista 32-bit?

Anyone know if Danielk has been here lately?
He said he wrote an app that really works.

Yes that is the thread . Thank you so Much jmacquire.
I ordered the http://www.manhattan-support.com/en-...e-port-adapter
Manhattan game controller but the techs said it is not compatible with the FLCS.
And also Daniel's directions are for adding a PCI Input Device.
The Manhattan will be a DB25 - USB input device.
So I am not sure if it will work.
Also I don't think Guillemot is making new Thrustmaster
products
Is there anyway to get the FLCS or other TM products
repaired if they break

No such luck Installing the Thrustmaster F-16 FLCS under Windows Vista 32-bit?

I am not sure if I should repost this?
I want to follow Daniel's directions but it is adding it as a USB
Human Interface Device not a PCI input device first off.
Anyone have any thoughts?
Thanks all in advance.
Best,
Methos

Yes that is the thread . Thank you so Much jmacquire.
I ordered the http://www.manhattan-support.com/en-...e-port-adapter
Manhattan game controller but the techs said it is not compatible with the FLCS.
And also Daniel's directions are for adding a PCI Input Device.
The Manhattan will be a DB25 - USB input device.
So I am not sure if it will work.
Also I don't think Guillemot is making new Thrustmaster
products
Is there anyway to get the FLCS or other TM products
repaired if they break

Networking a HP color laserjet 2600n printer on windows 7 (64-bit)?

Hello,
Have an HP Color Laserjet 2600n printer and are running Microsoft Windows 7 (64-bit). I installed >> HP Color LaserJet 2600n Plug and Play Package off of HP website [ http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p... ]. The drivers work fine if you connect via USB port but unfortunately there's no way to connect via network. Can anyone give me guidance on how to connect the 2006n via a network on windows 7 (64-bit)?
Thanks
This question was solved.
View Solution.

Have you plugged the printer into your router and does it have a proper IP address? If so:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

How to install the HP Designjet 510 42in Printer driver in the W2008 R2 print cluster?

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

How to change the paper type in printer settings?

Does anyone know how to change the paper type in printer settings? I'm trying to have the ability to change it to photo paper from Photoshop Elements. I can't find the option in printer settings or through Elements. I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
thanks!

It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

I just bought a new computer and want to load in photoshop from the old one. I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade. Any advice?

How do I transfer photoshop from one computer to another? I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade. Any advice?

karen2179 wrote:
If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
No, but it may help the chances of a successful installation.
karen2179 wrote:
Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer. What? Am I getting spammed on Adobe's site here?
Where did you see that?

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

Nothing in the Acrobat 8.x product family is compatible with Windows 7 (or any contemporary OS).
The Acrobat 8.x product family passed into End of Support way back -- (November 2011).
The current release of Acrobat (XI) is compatible in Windows 7.
Be well...

How to install the HP 1010 laserjet printer in windows 7 (64 bit) os pc?

Similar Messages

Maybe you are looking for