How to install the I tunes in a pad help me to salve the problem pls

Hi am notable to connect with tune , I just want to knw to connect with that

Hi Bubba6824,
Thank you for using the Apple Support Communities.
When we are dealing with iTunes Store connectivity issues, the following articles usually provide a resolution:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
As I wasn't able to find the error message you mentioned, if your issue is still unresolved after following the troubleshooting steps in the above articles, you can contact Apple for support and to discuss your support coverage.
Cheers!,
Matt M.

Similar Messages

Im my lap has hard disk problem,how to resolve the problem,pls help me...

Hello,
           I have hp pavilion dv4 lap,in this lap has some hard disk problem,when i am turn on the lap that screen shows this message "The smart hard disk check has detected an imminent failure.To ensure not data loss,please backup the content immediately and run the hard disk test in system diagnostics".
           After that i was diagnostics the system but no changes in the lap,,again again lap shows hard disk error(301).
           Then i am chosen the enter option to start up the lap it take long time for openning the windows,after enter the windows that also shows about the hard disk error in within few minitues,
           What can i do?
           This lap bought at 12-oct-2012 from malasiya,now im in tamil nadu,how to solve the problem please help me.

Hello srhk. Thank you for posting on the HP Forums.
I understand the hard disk is experiencing issues. Error 301 indicates the hard disk possesses a hardware defect. I would contact HP Phone Support for assistance, or purchase an equivalent hard disk.
If you choose to contact HP, their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

How to install a CableCARD tuner in your DIY Media Center

http://www.engadgethd.com/2009/05/12/how-to-install-a-cablecard-tuner-in-your-diy-media-center/
RAWR *
>

Check this article out
https://wiki.archlinux.org/index.php/In … ting_Linux
Note that it says it is out of date because of pacman. Really all you need to know is that pacman uses signed packages now, so it is now necessary to run the pacman-key stuff. Or set SigLevel = Never in pacman.conf
Edit: IMHO the first method is preferred because it more closely resembles a regular install. Ergo, you will be able to semi follow the beginners guide for config and such.
Last edited by WonderWoofy (2012-08-17 03:42:12)

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

I just bought a new computer and want to load in photoshop from the old one. I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade. Any advice?

How do I transfer photoshop from one computer to another? I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade. Any advice?

karen2179 wrote:
If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
No, but it may help the chances of a successful installation.
karen2179 wrote:
Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer. What? Am I getting spammed on Adobe's site here?
Where did you see that?

How to install the SAPRouter service on a Windows 2003 Server?

Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
Sharon

I tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

Downloading and installing the iOS5.0.1 Following problems occured: with my iPhone 4s: Phone calls are dropping out in UAE, how to solve the problem?

You're not speaking to Apple on in this forum, nor will someone from Apple see this post. We are just users like you and I.
Have you tried to restore or reset your phone?
Or contact your carrier in re: to your sim card

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1 ?

Glad I could help. Thanks for letting me know I did.
Gene

How to install the camera raw plug in?

how to install the camera raw plug in?

Hi Andreaid,
An easy way is to go to Help>Updates in whatever program you have that includes camera raw like Photoshop or Bridge.
Thanks,
- Dave

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install the oracle lite mobile server?

hi,every one!
I follow the wizard of the oracle lite mobile server,then
pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
tells me that "invalid server name",how can i do?
somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

Andy,
It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
TNX,
Phil

How to install the same copy of creative suite on the second computer?

Basically I am using a Macbook Pro and upgraded my hard disk. A
After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
Download and Installation Help -
https://helpx.adobe.com/download-install.html

How to install the Sample Apps in Hyperion Financial Management 11.1.2.2?

Hi,
Could please anybody tell me how to install the Sample Applications in Hyperion Financial Management 11.1.2.2?
The following is written in the Administration guide:
If you did not install the sample files, you can obtain them by reinstalling Financial Management
and selecting the Sample Applications component.
I cannot find the “Sample Applications component” among components during installation process.
There are only “Financial Management ADM driver”, “Financial Management Web Application” and “Financial Management: services”.
Hope this helps,
Thank you,
Vadim

After you install the sample application, all of the application extracts can be found under the below location.
Oracle_Home\Middleware\EPMSystem11R1\products\FinancialManagement\Sample Apps and Starter Kits\Sample Apps

How to install the I tunes in a pad help me to salve the problem pls

Similar Messages

Maybe you are looking for