How to install the OS using a Toshiba Recovery DVD

Hi
I want to clear my laptop and start from scratch and I have a toshiba product recovery DVD
When i put it into the D drive i just keep getting a window that asks if i want to copy pice, play cd etc
I thought the DVD would wipe everything off the hard drive???
How do i wipe my laptop and start again? help needed please
marg

Recovery disc and recovery procedure cannot be used under running operating system.
When you switch your notebook on press F12 button to enter boot menu, put the recovery disc in optical disc drive, choose CD/DVD drive in menu and press Enter.
Recovery procedure will start. Just follow the menu on the screen.
Before you do this back up all your important data.

Similar Messages

Installing the same operating System from recovery DVD

Hi there, I have windows 8.1 in my laptop. But The only partition I have is the windows drive. Now I want to partition my hard disk and install windows in one of the partition. I have a recovery partition also. I have made recovery disk from this partition. It took 5 DVDs to be written. Now please let me know that how can I partition my hard disk and install windows from my recovery partition or recovery DVDs?
Thanks
Regards
Rafay Zia Mir
Pakistan

Hi @RafayZia
Welcome to the HP Support Forums!
I understand you are looking for instructions on how to use the recovery partition or the recovery disks you have made. I am happy to assist.
I would not recommend removing the recovery partition if you can avoid it. It is another safety net for you, in case those disks prove to be defective, or get damaged.
Anyway, in answer to your original question, the following pages show the methods of performing a system recovery, in different situations, and the second one is to help when problems occur.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)
I hope this helps.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

I have an intel based mac with 10.6.8 mac os x. How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

Welcome to Apple Support Communities
You can install Windows from a USB drive in one of these computers:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and newer).
- MacBook Air.
- iMac (Late 2012).
If you don't have any of these Macs, you can't install Windows through a USB drive. Instead, buy Windows on a DVD. Follow Apple's steps > http://support.apple.com/MANUALS/1000/MA1519/en_US/Boot_Camp_Install-Setup_10.6. pdf

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please?

If any one could help me with this. i'd be enternally grateful as i'm getting nowhere on my own!
I have an apple emac powerpc G4 which is running 10.3.9 software. I downloaded the 10.5 leopard software. Does anyone know how to install the 10.5 without using the dvd installer? In dummy terms please

The only way to get 10.5 is to purchase it on CD. Such as http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC where is being sold for $179.99.
If your optical drive is broken, you will either need to replace it or get an external. There is no other way.
Why do wish to upgrade? As you can see it is going to be expensive, probably more the Mac is worth.
Allan

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

I just bought a new computer and want to load in photoshop from the old one. I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade. Any advice?

How do I transfer photoshop from one computer to another? I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade. Any advice?

karen2179 wrote:
If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
No, but it may help the chances of a successful installation.
karen2179 wrote:
Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer. What? Am I getting spammed on Adobe's site here?
Where did you see that?

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install the oracle lite mobile server?

hi,every one!
I follow the wizard of the oracle lite mobile server,then
pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
tells me that "invalid server name",how can i do?
somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

Andy,
It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
TNX,
Phil

How to install the same copy of creative suite on the second computer?

Basically I am using a Macbook Pro and upgraded my hard disk. A
After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
Download and Installation Help -
https://helpx.adobe.com/download-install.html

How to install the musegrid audio widget?

Does anyone know how to install the MuseGrid Audio Widget. Once I get in in the library I drag it onto the page, preview it and nothing show in the browser. I have the assets folder that comes with it but have no clue how to connect the widgets assets to the audio player. As well as how to connect the mp3 file to the audio player.
There are no clear cut instructions about the install and even on the page I downloaded it from the video tutorial does not play. I think I gave away $9..Please Help

Unfortunately I can't help with that particular widget, however I will mention that we do also have an audio widget over @ MuseThemes.com. There is a training video on this page that explains how our Audio Widget works - you might have some luck getting your downloaded widget to work by using a similar method as we use...
Adobe Muse MP3 Audio Player Widget
Cheers
SH

How to install the Leander Script

I do not understand how to install the Leander Script that I received as a gfit with my purchase of Adobe. The instructors say navigate to the folder where the fonts are. Then it says to select the fonts. I do not see how to select the fonts, then right click the fonts and choose install. I do not see these aspects of the instructions.

HI,
First log on to your target client.
Go to SE71 initial screen.
Here go to Utilities --> Copy from Client..
now u will get a screen from where u can copy the form form source client to current client...
OR u can do the following
you can use the tcode scc1 in the target cleint so as to copy from the developed cleint. Then you need to give in the request number only and click on start immediately.
Hope this helps

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

How to install the OS using a Toshiba Recovery DVD

Similar Messages

Maybe you are looking for