How to INSTALL the SAP?

Can anyone tell me how to INSTALL the SAP ?

It is easier than Windows 2003 Installation.
Contact SAP, For more details.....

Similar Messages

How to install the SAP Java Connector

Hi,
I am unsure how to install the SAP Java Connector on Linux (Suse Linux Enterprise 10). The SAP Integration Kit install and admin guide says:
===
u2022 Copy the librfccm library and the libsapjcorfc library to busines
sobjects_root/enterprise120/PLATFORM_PATH, where busines
sobjects_root is the full path to your businessobjects directory,
and PLATFORM_PATH is your platform. For example, PLATFORM_PATH
is solaris_sparc for an installation on Solaris.
u2022 Use symbolic links for the location of the librfccm library and the lib
sapjcorfc library.
u2022 Add the location of the librfccm library and the libsapjcorfc library
to the library path.
===
Do I have to do all 3 steps or is the 1st one (copying of files) enough?
On the other hand, the SAP Java Connector guide says:
===
Then add {sapjco-install-path} to the LD_LIBRARY_PATH environment variable.
Finally, add {sapjco-install-path}/sapjco.jar to your CLASSPATH environment variable.
===
So, what to do?
Thanks!

Thanks for your help. So i copied the 2 files as mentioned in point 1.
Where do I have to copy the file sapjco.jar to? There is no shared lib folder after installing BO Edge 3.1 on a Linux system.
I copied the sapjco.jar to /bobje/tomcat/common/lib but still get the message that the Java Connector files are not in the correct directory.
I already copied the files librfccm.so and libsapjcorfc.so to /bobje/enterprise120/linux_x86 .
Thanks again!
Edit: problem solved: Copying the sapjco.so to tomcat/shared/lib is correct, if the directory doesn't exist then just create it (mkdir). The message is just plain information 7 hint.

Instructions on how to install the SAP Cryptographic Librabry

Hi all,
Earlier today I posted this query under the "Security" Forum but was told it's better posted here... so apologies in advance if you're seeing this thread again.
What I would like to know is how to install the SAP Cryptographic software?... I have downloaded the SAP Cryptographic Library SAR file, and unpacked it, but am now looking for instructions on how to install and configure the software... anyone know how to do this?
Thanks
Sharon

Hi Sharon,
First uncar the SAR file in the folder \usr\sap\<sid>\saprouter
Just paste the files here once you uncar it.
Then you have to set the variables as
'SECUDIR' = \usr\sap\<sid>\saprouter
SNC_LIB = \usr\sap\<sid>\saprouter\ntadm64\sapcrypto.dll
ntadm64 or what ever folder you get once you uncar it.
Reward points if helpfull.
Regards,
Vamshi.

How to install the SAP B1 version 9.0 PL05 with various part files

Hi experts,
I have the Version 9.0 PL05 setup in the customer portal downloads as the attached pics.
like Part1(exe), part2, part3, part4, part5, part6, part7. whereas 8.82 installations files was in single packages right .
how to install this in the the server ?
Regards,
Dwarak

Hi,
Please download all part and install from part 1 (exe).
Thanks & Regards,
Nagarajan

Anyone know how to install the SAP/SDN SSO certificate on iOS device?

Hi all,
I tried to benefit from Single Sign-On to the various SAP and SDN site on my iPad/iPhone by using the client certificate I already use in my desktop browser, but I haven't had any success using it so far...
I emailed the certificate to my iPad, and by tapping on the attachment it got (properly?) installed, i.e. at least it is visible under Settings > General > Profile
However, when navigating to SDN and choosing 'Certificate Logon', it seems to ignore any certificate I have stored and prompting me the username/password logon page...
Has anyone been able to use SSO using the certificate? I'm quite curious to know how I could achieve this.
Best regards,
Robin van het Hof
Edited by: Robin van het Hof on Nov 22, 2010 12:58 PM

Good question!
Whenever I attempt to use the SSO sign on to the forums, my Safari browser crashes. I do have the Apple iPhone Configuration utility software which allows for companies to deploy certificates and other various items to its users. (free from the apple site) What I see when I try to apply the cert for this site is, the private key is marked "unexportable". Therefore I cannot apply that certificate to the device in its entirety.
I currently run the iPhone 4 with 4.0.1 software (I never update right away)
Regards,
Zecher

How to install the SAP Netweaver tools

Dear Friends,
I want to develop applications thro SAP Netweaver Tools. Can any one guide me thro installation process, since I am new to Netweaver. Where do i get the software. Pls help.
Regards,
Shankaran J
+91 98404 61721

HI
Hi,
You can download NWDS from this link
https://www.sdn.sap.com/irj/sdn?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Refer the thread for more information
Re: Where "SAP Netweaver Developer Studio 2.0"?
For Development refer these links
NETWEAVER
http://help.sap.com/saphelp_nw04/helpdata/en/30/c4461ff69d5a438f1286e344b545fa/frameset.htm
PORTAL
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
DEVELOPMENT MANUAL
http://help.sap.com/saphelp_nw04/helpdata/en/6a/50c0b26e2543a2984dcd518e26dc65/frameset.htm

Steps to Installing the SAP Cryptographic Library

Hi, not sure if I have picked the right forum but can anyone tell me how to install the SAP Cryptographic software?... I have downloaded the SAP Cryptographic Library SAR file but am now looking for instructions on how to install and configure it?
Thanks
Sharon

Even though this library is used for security, installation of SAP components is more a basis thing. Didn't the download site provide any manuals?

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install the SAPRouter service on a Windows 2003 Server?

Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
Sharon

I tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S

How to install mini SAP in MS SQL Server 2005 Express?

Hi, is anyone know how to install the mini SAP v4.6 by using MS SQL Server 2005 Express?
I get error when connecting to the Database at 88% of the installation.
Please help. Thank you.

I do not think you can install miniSAP 4.6D on MS SQL server 2005 express.
1) you need the up todate patch to run on MSSE. If SAP did the work to allow it to run, it would be patch 55+. As supplied it is patch zero.
2) You can install on MSDE (MS SQL server 2000) patch 4. Look for my post INFO: Installing MiniSAP 4.6D on a named instance of MSDE (MS-SQL).
3) after the install on MSDE SP4 you would have to change the database code page to 'BIN2' look for the OSS note.
4) then you can start patching through to the most recent.
The main reason you cannot do this is MS have changed the version key format to include '.6' as extra info which SAP cannot interprate, too many dots.
MattG.
Message was edited: add URL

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

How to install the CMS

Hi i am trying to create track
i installed Netweaver 7.0 with SP14.
I configured the sld and its working fine
now i am in the stage to create the Track for development.
In the process of crating the track its asking the CMS URL and User Id and Password.
Please let meknow
1 .how to install the CMS server and ?
2. What is the URL and UID /Password.
3. I am not able to see the NWDI roles in my server
Please let me know how to achive that.
Thanks
MMukesh

Hi,
See It depends upon your landscape..
If you want to transfer the Dev to Quality..
--The basis team should create the all respective track..
--After activating your Objects in IR ,ID you will get another option in change list there you have to rclick and click on transport automatically transfered to QA..
The other way is through file you can transfer..export ,import... options..
-- this is you have to export the objects by SWCV or namesapce wise .. the all object will be stored under one path in server .. next you have to prepare the excel sheet you objects ..then the basis team will transfer the tpz file to qa and there it will be imported..
Please see the CMS transfer links..
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Where can I get installation files of DTR, CBS, and CMS?
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
'How ToTransport XI Content Using CMS'.
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards
Chilla..

How to install the widget development plug-in Tool -URGENT

Hi I am new to the widget development.
I have already installed the NWDS7.0 SP9 , doing the development for the webdynpro and protal .
To work on widgets i have found the pulgins in the following url in the zip format.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/100ad59a-7b6b-2a10-8ab5-e6078fa8e5b8
SAP Widget Development Tools - zip file.zip file when i unzipp this file i have got the following dirctory structure.
SAP Widget Development Tools - zip file (dir)
|---- features (dir)
|---- plugin (dir)
|---- site.xml
When i copied these whole directory in my IDE installed plugin directory
C:Program FilesSAPIDEIDE70eclipseplugins
then i restarted the my IDE . But i have nt find any prospective or plugin enable with respect to widget.
I have went through the widget development guide (SAP Enterprise widget development guide.pdf). There it is explained that download the eclipse3.3.1 and then extract the eclipse.
so it is really confusing how to proceed.
My question is , will it be possible to installed the plugins with the installed NWDS by copy the plug-in tool (when i doo that it is not working, because when we extract it is giving 3 directory's seperatly "features, plugin, site.xml". do we need to copy this way to IDE plugin directory.) If i done this it is not workng?
or
Do i need to install the Eclipse seperately to install this widget development plugin.
Please help me to setup the eclipse development setup.
Regards
Vijay

Hi JaiDeep
Thanks for the valid reply
Finally i have decided to install the CE7.1 SP 3 version.
But which version of jdk is supported by SP3 is not given at the site.
Do u have any idea, if i install the CE7.1 SP3. and then can i install the SAP widget Foundation also along with that.
This tool requireds
JAVA 1.6
SUCUDE PSE management install
In the SAP Widget foundation guide has given the steps for the installation.
But the url it has given will be going open in the SAP networkonly.
http://nvpal168.pal.sap.corp:1080/wfws/foundationWS.jnlp
What is difference in SAP Widget Foundation Installation and SAP Widget Foundation as a Standalone Application ?
How i need to proceed for the SAP Widget Foundation installation?
where do we get the SUCUDE PSE management install?
whether the CE7.1 sp3 supports the java1.6 version?
Regards
Vijay
Edited by: Vijay Krishna Meda on Jan 23, 2008 6:55 PM

How to test the SAP modules like SD and MM By using Quality Center and QTP

Hi Experts,
How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
Regards,
Skumar.

Hi Sampath,
First install QTP and SAP Addin with in QTP.
2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
Once recording is done QTP will create a script in VB
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SAPGuiOKCode("OKCode").Set "/nVA01"
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SendKey ENTER
you can always add a parameter and other customization according to your requirement.
Let me know if you need more information regarding this.
Good Luck!

How to install the db2 9.1 license

hi friend
how to install the db2 9.1 licence   in aix 5.3.
enviroment
os             : aix 5.3
data base : db2 9.1
sap componets : ecc + ep
regards
raja

Hi,
Just check out the snote 816773 which speaks about valid license to use DB2
1. You are an SAP customer and you already have DB2 licenses from IBM or IBM sales partners. In this case, your IBM license documentation is used to verify usage entitlement. You will continue to use the DB2 licenses you obtained from IBM in your SAP system.
2. You are an SAP customer with a DB2 OEM license issued by SAP. In this case, your SAP license agreement includes the right to install the DB2 OEM software from IBM together with the SAP system for which you have a license. You can obtain the DB2 OEM licenses from SAP.
If situation 2:-
Version 9 of DB2 for UNIX and Windows:
1. Go to http://service.sap.com/swcenter-3pmain
2. Choose "DB2 for Unix and Windows"
3. Choose "DB2 Version 9.1 software download"
4. Choose "Installation"
5. Choose "DB2 UDB"
6. Download the "01200615322000000718" object (License files for DB2 9 LUW)
7. Unpack the zip file using a suitable unpacking program
8. Install the license as the db2<dbsid> user by using the following commands:
              db2licm -a db2ese_c.lic
              db2licm -a db2dpf.lic
              db2licm -a db2so.lic
9. Use the following command to check whether you correctly installed the license:
              db2licm -l
              You must have installed a permanent license for the "DB2 Enterprise Server Edition" product that has the following features:
DB2 database partitioning
DB2 storage optimization
Rgds
Radhakrishna D S

How to INSTALL the SAP?

Similar Messages

Maybe you are looking for