How to install the shared services

i installed the system9.3.1 but i dont know how to install the shared sevices could you please help me on this.
thanks
subbu.

Hi,
Kindly see installation doc of Shared Services from this URL: - http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm
Regards,
Atul

Similar Messages

How to install the SAPRouter service on a Windows 2003 Server?

Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
Sharon

I tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S

How to Move the Shared Services Registry to a different SQL Server

I have an Essbase installation purely running Essbase and Financial Reporting/Web Analysis.
The Shared Services database is held in SQL Server 2005 on one hardware platform and I need to move it to an alternative hardware platform also running SQL 2005.
I thought it might be as easy as backing up from one server and restoring to the other and then running EPM System Configurator.
Firstly, when running configurator and selecting the Hyperion Foundation Configure Database option, on the 'Shared Services and Registry Database Configuration' screen the details of the original hardware are displayed, clicking 'Next' gets no response.
If I can resolve this first issue, how do I then re-point the database to the new server?
Any help would be appreciated.
Thanks.

Hi John
Took a look at the link thanks.
On point 3 it says to stop the original database. If you take the database offline, in configurator you don't then get the options in option 5!
In the dos command window for configurator I get 'Unknown Source' messages (either using current server or new).
configtool.log lists as follows. Does this point to anything?
Thanks.
(Sep 15, 2011, 03:26:47 PM), com.hyperion.hit.wizard.swing.ComboFieldSwingImpl, DEBUG, In ComboFieldSwingImpl.fieldChanged() method:,fld items: [Oracle, Microsoft SQL Server, IBM DB2], value: 1, selected idx: 1
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, connect test
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, driver set
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, server= aeSQL02.xxxxxxx-xxxxxx.com
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, whiteSpace remove
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, begin test cycle
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, define driver
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, make connection
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, set URL
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, connection is NOT null
(Sep 15, 2011, 03:26:50 PM), com.hyperion.config.wizard.impl.DBConnectionForm, DEBUG, DB type string = MSSQLServer
(Sep 15, 2011, 03:26:50 PM), com.hyperion.cis.config.Configurator, DEBUG, Loading DBConfigurator class for product: Foundation_1_9.5.0.0
(Sep 15, 2011, 03:26:51 PM), com.hyperion.cis.config.Configurator, ERROR, Error:
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at com.hyperion.cis.config.Configurator.loadProductDBConfigurators(Configurator.java:210)
     at com.hyperion.config.wizard.impl.RegistryWizardState$1.validate(RegistryWizardState.java:205)
     at com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel.queryExit(WizardFormAdapterPanel.java:95)
     at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
     at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(SwingWizardUI.java:1693)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.notifyListeners(SwingWizardUI.java:1899)
     at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationController.actionPerformed(SwingWizardUI.java:1894)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NullPointerException
     at com.hyperion.foundation.config.FoundationDbConfigurator.isHubInstalled(FoundationDbConfigurator.java:133)
     at com.hyperion.foundation.config.FoundationDbConfigurator.<init>(FoundationDbConfigurator.java:38)
     ... 36 more

Neet to locate the shared services native users in SQL server tables

Hi All,
We are using Hyperion Shared services to provision users to essbase, planning and HFM(all version 9.3.1). And we are using SQL server 2000 as the database. We created few native users in shared services and provisioned them to HFM, Essbase and Planning. Now we need to find those native users' information in the underlying SQL tables. I followed the documentation and sync-ed the native to relational tables using shared services, but I cannot see the user info for all the users I have created. I would appreciate if you can suggest me how to find the shared services users' and roles information in SQL tables (in the back end).
Legards,
Leo

Hi,
There are a number of free Ldap browsers that you can download, e.g.
http://www.mcs.anl.gov/~gawor/ldap/demo.html
http://www.ldapbrowser.com/download.htm
Once you have installed then ldap browser you just need to point it to your Openldap
Host :- machine with OpenLdap running
Port :- 58089
Base :- dc=css,dc=hyperion,dc=com
User DN :- CN=root,dc=css,dc=hyperion,dc=com
And just the root password which you can change in HSS in 9.3
Cheers
John
http://john-goodwin.blogspot.com/

Install The Provider Services

I installed Essbase 11.1.1.3.0 successfully in my machine. Following components are installed while installing Hyperion Essbase 11.1.1.3.0
1> Essbase System Installer
2> Essbase Foundation Services
3> Essbase Client
4> Essbase Server
Is Provider services needed for analysing the data?
Without it we can't do analyse?
Is needed then how to install the provider service alone in my machine?
Note : I downloaded the Provider services but i want to how to install it in Existing Hyperion Essbase.

Hi,
Provider service is not required if you want to analyze data through Essbase Excel add-in or report script.
Provider Services is a middle tier services which are required for following:
Hyperion Essbase High Availability Services
Hyperion Essbase Smart View for Office Provider
Java API
XMLA Provider for Hyperion Essbase
Unless you need above you dont have to install Provider services.
Hope it helps.

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install EPM Provider services on windows.

Hello all,
I downloaded the EPM 3 packs and the EPM installer as well. My aim is to install the SmartView for Office and work with OBIEE from MS office components through the SmartView features.
When trying to install the EPM, it shows the "shared services" and "SmartView" as the installable things on my laptop. There are neither other components called "Provider Services" nor it allows to install anything other than the two listed above.
Can anyone guide me how to install these Provider services and how to connect to OBIEE from MS-Office tools using SmartOffice client?
Any suggestions are highly appreciated.
Thank you
Narasimha

Hi,
Provider Services is part of the essbase server installation, you will need to download "Oracle Essbase Server Release 11.1.1.0.0" and install the server element of provider services.
Cheers
John
http://john-goodwin.blogspot.com/

How to enter into shared services in system 9

how to login into shared services

Hello,
I'm new with Hyperion and would like to ask something. I installed Hyperion Shared Services 9.3.1 in my desktop (inside consist of Windows XP Professional Service Pack 3, 1 GB RAM, Oracle Database 10g (10.2.0.1) Standard Edition, Oracle Application Server 10g).
I read from Hyperion Shared Services security guide in Chapter 3 about User Management Console that we can launch User Management Console in 3 ways:
1. Using a browser and connecting to the User Management Console URL
2. On Windows, navigating Start > All Programs > Hyperion > Foundation Services > User Management Console
3. From a Hyperion product interface
I tried to connect using URL : http://<localhost>/58080/interop and http://<localhost>/58080/interop/ and http://<localhost>/58080/interop/index.jsp but failed (where I changed <localhost> to my computer name). When I installed Shared Services, there are no point to choose port or create username.
There are no User Management Console in Foundation Services either.
How to start and stop Shared Services then and how do I know Shared Services has already run?
Thanks.

How to Regester one Shared Service with Another ??

Hi All,
I am working on Hyperion System 9.3.1. I am getting problem when I want to access Essbase through Planning.
Here is the scenario:
I have Hyperion Essbase installed in Computer 1 with separate Shared Services; I have Planning installed in Computer 2 with another Shares Services.
All things were working fine as I have created same users in both the shared services and was using native user of Essbase.
Now I have changed the native user to Externalize user in Essbase. Since then I am not able to access Essbase through my Planning application. The user privilege differs in both the Shared Services as Computer 1 has only Essbase and Computer 2 has Planning.
The error message I am getting in planning while connection is “Unable to obtain a connection to Hyperion Essbase”. In the essbase.log file I am getting “Login fails due to invalid login credentials” message.
I think the problem here is between Shared Services only. As both are in different system and the user privileges are also different.
Kindly suggest how to sink my Essbase between these two shared services.
Regards,
Navneet

Just to clarify,
You have Planning and Essbase on one machine and you have shared services installed twice on different machines?
I'm not sure if this architecture will work, you might have to separate Planning and Essbase to there own servers and create a new Essbase server specifically for Planning applications. Planning utilizes Essbase for its OLAP data store and Essbase registers with Shared Services directly.
Brian Chow

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Essbase Product Existence Check Fails against the Shared Services Server

Hello Everyone,
I am a new to Essbase
When I am launching the EAS web console and trying to log in, its giving me an error saying "Could not connect to Administration Server".
I looked in ESSBASE log file its showing an error 1051429 : "Essbase Product Existence Check Fails against the Shared Services Server with Error []"
This error actually started when I copied an Essbase Application from one of my computers to another computer. All I simply did is copied the application folder into "app" folder. I am not sure if migration
is possible just by copying and pasting the application folders. I am not sure if doing this messed up security with shared services. Also under c:\hyperion\essbase folder I see another text file named "SharedServices_Security_Client".
Its log for today is below:
2011-11-03 19:36:15,375 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:15,531 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:36:18,531 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:36:45,531 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:36:45,531 INFO [main] CSS system intialization failed. : [44156 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,765 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 19:44:14,781 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 19:44:14,828 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 19:44:16,796 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 19:44:16,953 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:02:47,687 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:02:47,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:02:48,328 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:03:08,921 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:03:08,921 INFO [main] CSS system intialization failed. : [63140 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:37,343 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:05:37,390 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] 20:1092:Failed to initialize EPM System registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:05:49,875 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:05:49,875 INFO [main] CSS system intialization failed. : [12625 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:06:42,859 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:06:42,890 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:45,359 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:06:47,218 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,250 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:06:48,265 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:07:17,359 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-11-03 20:10:12,937 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-11-03 20:10:13,000 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,265 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-11-03 20:10:14,671 INFO [main] Got hub location from Registry:http://chandan:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] Got native directory location from Registry:chandan:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)
2011-11-03 20:10:14,812 INFO [main] URL constructed out of values in Registry database:ldap://chandan:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)
2011-11-03 20:10:15,234 ERROR [main] 80:6007:Failed to load SAP certificate from keystore at SAP.keystore. Ignore if SAP provider is not configured.[Root Cause: Invalid keystore format ] com.hyperion.css.SAPSecurity.loadSAPCertificate(Unknown Source)
I dont know how to resolve this.
Please Help
Thank you

From the log
Error establishing socket to host and port: chandan:1433. Reason: Connection refused: connect
The SQL server itself is not running or TCP/IP is disabled. That can be confirmed by runing netstat and see it is listed there.
Then run telnet chandan 1433 and see it can connect
To enable the TCP refer to this link
Re: error establishing socket to host and port: EPM11:1433

How to install the oracle lite mobile server?

hi,every one!
I follow the wizard of the oracle lite mobile server,then
pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
tells me that "invalid server name",how can i do?
somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

Andy,
It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
TNX,
Phil

How to install the Sample Apps in Hyperion Financial Management 11.1.2.2?

Hi,
Could please anybody tell me how to install the Sample Applications in Hyperion Financial Management 11.1.2.2?
The following is written in the Administration guide:
If you did not install the sample files, you can obtain them by reinstalling Financial Management
and selecting the Sample Applications component.
I cannot find the “Sample Applications component” among components during installation process.
There are only “Financial Management ADM driver”, “Financial Management Web Application” and “Financial Management: services”.
Hope this helps,
Thank you,
Vadim

After you install the sample application, all of the application extracts can be found under the below location.
Oracle_Home\Middleware\EPMSystem11R1\products\FinancialManagement\Sample Apps and Starter Kits\Sample Apps

How to install the SAP Java Connector

Hi,
I am unsure how to install the SAP Java Connector on Linux (Suse Linux Enterprise 10). The SAP Integration Kit install and admin guide says:
===
u2022 Copy the librfccm library and the libsapjcorfc library to busines
sobjects_root/enterprise120/PLATFORM_PATH, where busines
sobjects_root is the full path to your businessobjects directory,
and PLATFORM_PATH is your platform. For example, PLATFORM_PATH
is solaris_sparc for an installation on Solaris.
u2022 Use symbolic links for the location of the librfccm library and the lib
sapjcorfc library.
u2022 Add the location of the librfccm library and the libsapjcorfc library
to the library path.
===
Do I have to do all 3 steps or is the 1st one (copying of files) enough?
On the other hand, the SAP Java Connector guide says:
===
Then add {sapjco-install-path} to the LD_LIBRARY_PATH environment variable.
Finally, add {sapjco-install-path}/sapjco.jar to your CLASSPATH environment variable.
===
So, what to do?
Thanks!

Thanks for your help. So i copied the 2 files as mentioned in point 1.
Where do I have to copy the file sapjco.jar to? There is no shared lib folder after installing BO Edge 3.1 on a Linux system.
I copied the sapjco.jar to /bobje/tomcat/common/lib but still get the message that the Java Connector files are not in the correct directory.
I already copied the files librfccm.so and libsapjcorfc.so to /bobje/enterprise120/linux_x86 .
Thanks again!
Edit: problem solved: Copying the sapjco.so to tomcat/shared/lib is correct, if the directory doesn't exist then just create it (mkdir). The message is just plain information 7 hint.

How to install the shared services

Similar Messages

Maybe you are looking for