How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

Similar Messages

How to install the SAPRouter service on a Windows 2003 Server?

Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
Sharon

I tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S

How to install the CS4 design standard in Windows 7?

I bought the CS4 design standard and install it in Win XP.
Recently, I upgraded my OS to Win7.
However, when I wanted to reinstall the CS4 design standard, it failed.
So I tried just install one function of that design standard : Acrobat 9.0 Pro.
That installation succeeded. But when I want to use it,
it shows that I need to initiate with other CS4 functions, such as CS4 photoshop to make it work.
Is anyone can help me? Thanks!

Hi s2007,
What was the error message that you encountered when you tried to install CS4?
We might have to check the install logs for the installation failure.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
You might also want to try the following steps:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

I just bought a new computer and want to load in photoshop from the old one. I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade. Any advice?

How do I transfer photoshop from one computer to another? I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade. Any advice?

karen2179 wrote:
If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
No, but it may help the chances of a successful installation.
karen2179 wrote:
Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer. What? Am I getting spammed on Adobe's site here?
Where did you see that?

How do i Install the Software Update Server for Windows 7?

How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
I downloaded the software so How do I install it?
Do I install it all over again or when I have windows open?
I am using Bootcamp.

Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1 ?

Glad I could help. Thanks for letting me know I did.
Gene

How to install the camera raw plug in?

how to install the camera raw plug in?

Hi Andreaid,
An easy way is to go to Help>Updates in whatever program you have that includes camera raw like Photoshop or Bridge.
Thanks,
- Dave

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install the oracle lite mobile server?

hi,every one!
I follow the wizard of the oracle lite mobile server,then
pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
tells me that "invalid server name",how can i do?
somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

Andy,
It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
TNX,
Phil

How to install the same copy of creative suite on the second computer?

Basically I am using a Macbook Pro and upgraded my hard disk. A
After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
Download and Installation Help -
https://helpx.adobe.com/download-install.html

How to install the Sample Apps in Hyperion Financial Management 11.1.2.2?

Hi,
Could please anybody tell me how to install the Sample Applications in Hyperion Financial Management 11.1.2.2?
The following is written in the Administration guide:
If you did not install the sample files, you can obtain them by reinstalling Financial Management
and selecting the Sample Applications component.
I cannot find the “Sample Applications component” among components during installation process.
There are only “Financial Management ADM driver”, “Financial Management Web Application” and “Financial Management: services”.
Hope this helps,
Thank you,
Vadim

After you install the sample application, all of the application extracts can be found under the below location.
Oracle_Home\Middleware\EPMSystem11R1\products\FinancialManagement\Sample Apps and Starter Kits\Sample Apps

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to install the development tools?

I want to know how to install the development tools like g++, make, etc... I just bought a macbook and seems the development tools don't come with Mac OS X.

Hi--
Welcome to the Apple Discussions.
They're on the first of your install/restore discs. I don't have mine in front of me, so I'm kind of winging it, but look for either Developer Tools or Xcode Tools on that disc. If you can't find the installer, post back and I'll dig up my MBP's disc and see where it is on there...
If you have a good internet connection, you can also sign up for the free ADC Online membership and download the tools there. But it's a monster of a download: almost 1GB.
charlie

How to install The Soundblaster Audigy SE in Windows 7 RC?

Similar Messages

Maybe you are looking for