How to install Tiger in the MacBook Aluminium?

Tiger is NOT letting me install it on my new MacBook...
any idea on how to hack it?
Dino
Message was edited by: strausz

You can't. You cannot install any version of OS X which was out prior to the release of your machine. The first release of the unibody MacBook will only run Leopard.

Similar Messages

Installing Tiger on a Macbook Pro that came only with Leopard

Hi guys,
Any ideas on how to install Tiger onto a Macbook Pro that came preloaded with Leopard, and only has a Leopard disc?
I've got a refurbished Macbook Pro recently. Realised that one of my application doesn't work, Capture One Pro. Visited Phase One's website and they said it only supports 3.9 and above at the time it was released, which makes it 10.4.10.
Systems in the story below: Macbook Pro Core Cuo. Macbook Pro C2D (new set), Mac Pro, iMac Core 2 Duo
Here's what I've tried
1. I've an original disk that came with my MBP CD. When I try to boot from that disk on my MBP C2D, it gives me the crash screen -> "please hold the power for secs to restart".
2. I've tried installing Tiger onto my iMac and did a harddisk clone via Carbon Copy Cloner (CCC) to my MBP CD. Tiger was able to run on my MBP CD fine.
3. Then I tried using CCC to clone it over to my MBP C2D. It doesn't work. Shows me the crash screen.
4. I've tried installing Tiger on my Mac Pro. Used CCC to clone over the disk image to MBP C2D. Doesn't work too. Crash screen.
5. Created disk images of Tiger with Disk Utility on iMac, Mac Pro. Tried to restore using the iMac, Mac Pro disk images of Tiger. Doesn't work. Shows me the crash screen.
6. Updated Tiger to 10.4.11 on my Mac Pro. Created disk image using Disk Utility. Restored MBP C2D with it. Crash screen on load.
I'm out of ideas and Apple Support won't open until Monday.
It seems that this MBP C2D is set on not installing Tiger, no matter what. Wonder if getting hold of a Tiger retail disc will do the trick?

You can install tiger onto a MacBook Pro up to version 3,1.
Run System Profiler and under hardware:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1 This line is the model number!
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B00
SMC Version: 1.27f1
Serial Number: XXXXXXXXXXX
Sudden Motion Sensor:
State: Enabled
I have got tiger installed onto this MacBookPro which is the latest 4,1 model, but you require the latest Tiger disk (which the Apple Genius had in my case), but the volume, brightness and trackpad gestures do not work! Everything else is fine.

How to install Windows 8 on Macbook pro with retina display ?

Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !

OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

How to install Windows 8 on Macbook Pro w/ Retina Display?

Hi,
I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
I will be very thankful. Please help!
Thanks

Hi Mende1,
Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
Well, The Guide is simple but there are few questions which I'm not able to understop still.
1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
Thanks

HDD crashed! How to install Tiger onto 867mhz G4 with no DVD drive??

Hi folks.
My trusty 867mhz G4 Quicksilver Powermac drive has finally konked out. It was running OS 9.2.2 before. Now I want to install Tiger as the OS.
Having only a CD drive (nope, can't read or write DVD's), how do I proceed to install Tiger (I have the original install disk) onto the brand new blank hard drive?
Possible tools that I have:
1) last generation 1.67mhz G4 powerbook
2) dual 2.5ghz G5 powermac
3) Lacie external firewire DVD drive
Things I have tried:
1) hold down "c" while starting up the Quicksilver with the Lacie DVD drive hooked up to it, hoping I can start up from the optical drive, which contains the Tiger install disk. Result: blank white screen that goes nowhere. Found out that the Lacie needs at least 10.3.9 to run.
I'm out of ideas.
Can someone tell me the right way to do this?

Thanks guys.
Didn't sleep at all last night, BUT, I did it!
1) Set the Quicksilver as a firewire target disk hooked up to my G4 1.67GHZ Powerbook. Result = frozen blue screen.
3) Set the Quicksilver as a firewire target disk hooked up to my dual 2.5GHZ G5 Power Mac. Result = frozen blue screen
So that got me thinking, the common thing about the Powerbook and Power Mac is that they both run Leopard. It makes sense to me that computers that already have Leopard installed will probably not run a Tiger installer.
So, I whip out the oldest and slowest computer I have, which is an old 550MHZ Titanium Powerbook, complete with 1 broken hinge, flickering screen and peeled paint. It runs Tiger. I set the Quicksilver as a firewire target disk hooked up to the Titanium Powerbook.
Voila! It works like a charm!
So for anyone facing the same problem, one of the possibilities is: you can do it with the computer set as a firewire target disk hooked up to another computer running nothing newer than Tiger.
Thanks again for your help guys!

How to install Snow Leopard on Macbook Pro? keep getting msg- cannot install Internal HD is used for Time Machine- this was reset to external HD and still get msg?

How to install Snow Leopard on Macbook Pro? keep getting msg- cannot install Internal HD is used for Time Machine- this was reset to external HD and still get msg?

At some point, your internal HD was selected for use as Time Machine backups, and a Backups.backupdb folder was created at the top level. So OSX thinks you're trying to install it on the same drive as your backups.
Open your internal HD with the Finder (you won't find it via a Spotlight or Finder search) and delete that folder.

Leopard DVD is far away. How to install XP without the leopard dvd?

ok. Leopard DVD is far away abroad with my sister.
How to install Xp without the DVD? Is there anyway to get the drivers that are to be installed from the dvd after installing Xp?
I really need to use Autocad and Rhino on my Macpro, so Parallels or VMware fusion is not an option. I am already using VMware fusion on my Macbook pro, but VMware will not use 4g RAM of my Macpro which means it would be hard to run Rhino.
By the way, I am planning to buy Windows (I am sooooo ashamed to install that self-messed up OS on my Macpro. but so what,,, Autocad and Rhino do not run on Mac, and I need specifically the two programs). XP with sp2, sp3, or vista. which one is the best option?
Since my Macpro has only One 2.8GHZ Quad-Core Intel Xeon, there is no need to buy XP professional? (XP home doesn't support multi-processors, and XP Pro does, I guess?)
Message was edited by: GoodmorningNightmare

GoodmorningNightmare wrote:
There are some parts that I don't understand.
VMware Fusion uses only 512 RAM maximum, doesn't it? But you said it will use my entire 4GB RAM but only 2 cores. That's something different from what I've known.
If fusion really uses 4gm RAM of my mac pro, I don't really have to use Boot Camp. But most people who need to run heavy programs in Windows choose Boot Camp because it's the only way to use a Mac just like a PC, meaning that the XP uses the entire RAM memory.
XP will only use 2 GB of RAM, no matter how much the system has.
I just found out that Rhino doesn't really work on Vista. So vista is ruled out.
Only Vista 64-bit recognizes all system RAM.

Combo Drive won't read DVDs - How to Install Tiger?

I have an iMac G5 with a Combo drive (Matshita CD-RW CW-8123) that no longer reads DVDs. It handles CDs fine. Other postings offer complaints about Super drives with similar problems, but I have found no solutions. My warranty has expired. I would like to install Tiger, but the installation disk is a DVD. So is the installation disk for iLife '06. Other postings have suggested that installing a new optical drive doesn't always fix the problem. Since I'll be paying for this, that doesn't sound sound like a promising option. Should I purchase an external drive? In the meantime, is there any other way to install Tiger without the DVD? I have other macs that work fine, so I really don't need the DVD to work properly except to install new software. Suggestions are welcome!
iMac G5 Mac OS X (10.3.7)
iMac G5 Mac OS X (10.3.7)
iMac G5 Mac OS X (10.3.7)

An external drive is a great option.
With that, you will likely get a much more capable drive than you would if you were stuck with only the models that will fit in your iMac.
For example, my PC has a 16x Dual-Layer DVD-R drive. But, most Apple compatible Internal drives are still limited to 8x.
So, you could likely get a much faster and more capable external drive than you could an internal drive for the same price.
With an external drive, you can also keep that drive should you get another machine. And, if you have more than one machine, you can connect the drive to whichever machine requires it at the moment. So, essentially, you can upgrade all your systems with just one DVD drive.
And, best of all, you have a product that is covered by it's own warranty, and not subject to how you installed it. And, you don't have to tinker inside your machine.
Also, OS 10.4.x "Tiger" is available on CD-ROM. So, you could send in for the replacement disks if you have the retail box of OS 10.4 Tiger.
From the OS 10.4 "Tiger" sales page:
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95. "
Download the order form.
http://images.apple.com/macosx/pdf/TigerMediaExchangeFormv5.pdf
Hope this helps.

HT3546 I can't figure out how to install bonjour from the CD that came with my airport express. Can anyone help?

I can't figure out how to install bonjour from the CD that came with my airport. Can anyone help?

If you are having difficulties installing Bonjour from the Installation CD, you can download the latest version of Bonjour from here.

HT3986 how to install any windows on macbook pro (early 2011) (os x mavericks)?

En: how to install any windows on macbook pro (early 2011) (os x mavericks)?
Ro: *** se instaleaza orice windows pe macbook pro (early 2011) (os x mavericks)?
Help Me Please

search
how to install windows on a macbook pro
http://support.apple.com/kb/ht3986
http://www.youtube.com/watch?v=uVfRQ0YIDUI
http://www.gadgetreview.com/2013/05/how-to-install-windows-8-on-your-macbook-pro .html
http://www.redmondpie.com/how-to-install-windows-7-on-macbook-pro-with-retina-di splay-tutorial/

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

I think that stuff is for windows, a waste of time trying to use it on a Mac.
There is no need to download anything for Khmer on a Mac. Apple provides Khmer fonts and keuyboards with OS X.
OS X Mountain Lion: Type in another language
MS Word for Mac does not support Khmer. Use TextEdit, Pages, Nisus Writer, LibreOffice instead

How to install and start the adapter(FILE)

hi,
when i checked in RWB for the adapters which are INSTALLED and STARTED adapters it's displaying all adapters except FILE adapter .
I need to known whether this adpater is installed or installed and started ,if the case then how to install and start the adapter

Hi Nandan,
if above is the case as i mentioned in previous response then,
You need to download the latest SAP BASIS 6.40 or 7.0 ".tpz file" (as per you service pack) from service.sap.com. Then you need to put this in the import directory:
<b>\usr\sap\<your system-id>\SYS\global\xi\repository_server\import\importedFiles</b>
Now go to
<b>IR>Tools>Import design Objects, you will find the .tpz file which you down loaded. Import this and refresh your cache.</b>
P.S This is the exact path in market placehttps://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
Regards,
Sarvesh

How to install Soap on the (Apache) Oracle HTTP Server

Hi,
Does anyone know how to install SOAP on the Oracle HTTP Server? I downloaded a soap version (it seems that the standard version comes without SOAP) from the xml.apache.org site and followed the installation instructions as far as I could (only Tomcat is described). However, no 'soaping'!!! Maybe I'm overlooking something because I cannot imagine that it should be difficult.
Thanks in advance!
Hans

Hans, the SOAP implementation is part of OC4J. You get it out of the box. Check out how to use the out-of-the-box implementation in the tutorials on Web services with Oracle9i JDeveloper at:
http://otn.oracle.com/tech/webservices/htdocs/series/content.html
These tutorials/samples use the implementation of SOAP/WSDL that Oracle calls J2EE Web Services and this is the long term direction of Oracle's Web services implementation. This implementation is what Oracle will be evolving to Sun's Java Web Services Developer Pack as it finalizes into J2EE 1.4.
If you want to use Oracle/Apache SOAP, this too is included in OC4J but its support is being deprecated in future releases of Oracle9iAS in favour of the J2EE Web Services implementation. To find it, check out the OC4J/soap/webapps/ directory for the soap.ear file (it is in a slightly different spot if you are using the full Oracle9iAS R2 but still within the soap directory structure. Simply add <application name="soap" path="../../../soap/webapps/soap.ear" auto-start="true"/> to your OC4J server.xml and <web-app application="soap" name="soap" root="/soap" /> to your OC4J http-web-site.xml, re-start and away you go.
Finally, just to be sure, SOAP support in Oracle9iAS did not appear until 1.0.2.2.x and higher. If using 1.0.2.1 or less, you are correct, there is no SOAP support.
Mike.
Most folks that try out the J2EE Web Services find it is pretty easy to use so

How do you iMessage from the MacBook Pro

How do you iMessage from the MacBook Pro?

Lord Of The Weirdos wrote:
And if you don't use that computer often be prepared for the mountains of new notifications the next time you run it. Especially if your like me and use your iPhone and iPad a lot for texting people. Wish iMessage in ML would know what you read somewhere else like iPad and iPhone does
I don't quite understand what you are saying? If i recieve and read an iMessage on the iPhone and then switch on my Mac, I don't get a notification about a new message, but that iMessage appears on the conversation.

How to install Tiger in the MacBook Aluminium?

Similar Messages

Maybe you are looking for