How to install toolkits into LV 8.0 DS-PCE when 7.1 version is still installed

Hi,
I am currently trying to upgrade from 7.1 to 8.0 (Development System-Professional Control Edition)
from the November '05 SSP release. As I have a very large investment in 7.1 development, my plan
has been to install the 8.0 system beside the 7.1 system, copy all of my developed source into a
new directory and start trying to turn it on. This hopefully leaves an intact LV7.1 system until the code
is safely running in 8.0
The first problem I run into: when I attempt to install the various toolkits, (in particular the internet
toolkit and the report...office toolkits) the installer doesn't install into the LV8.0 environment; opening
my application VI in the 8.0 system results in missing report generation VIs and FTP vis which (in the
7.1 environment) are found in vi.lib\addons\internet and vi.lib\addons\_office. These directories are
missing in the 8.0 vi.lib; copying them over from the 7.1 directory fixes this problem but leaves me
uneasy as to what other problems I might be causing.
What is the correct way to install the toolits in such a dual-version system?
Regards,
Bob

Hello all,
The toolkit installation into multiple versions ao LabVIEW ahs been a
problem for a while now. I was hoping they would fix the installers
with LV 8, but it looks like it slipped though again.
I went through the toolkit and made a document that describes all the
files that need to be manually copied from one LV installation to the
others so you can have the toolkits in multiple versions. I have not
yet updated this for LV 8 because we just got our software pack last
week and I just haven't had time. But it should be pretty complete.
You can download the document from the LAVA forums here.
Please let me know if you run into any problems with missing VIs. Those will be the first toolkits I look at.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

How do I get into iPhoto to free up memory when I can't get in due to no memory?

How do I get into iPhoto to free up memory when I can get in due to no memory?

Are you being prevented booting into your MBP due to the HDD being full? If so try a a safe boot:
https://support.apple.com/en-us/HT201262
If no success, try Target Disk Mode:
https://support.apple.com/kb/PH10725?locale=en_US
Or take out the HDD and install it in an enclosure. Connect it to another Mac and take some data off of it so that you can boot to it when you re-install it.
Ciao.

How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

Settings / iCloud on the iOS device to view your settings and options.
Storage & Backup / iCloud Backup is how you restore the device with your last backup.

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1 ?

Glad I could help. Thanks for letting me know I did.
Gene

How to install fonts from CS3 into CS5?

At work I often need the font DIN which was installed with our version CS3. At home I have CS5 and I do not know how to install the needed fonts. I packed the relevant file with the fonts and other links into a directory but how can I install the fonts at my personal computer using Windows. When using a Mac it was quite easy to install the font, I just click at the font within the directory "fonts" and with another click on "install" I got the font. My PC however asks me which programme I want the file to open with - but which one should it be? It can't be Word, Photoshop, IrfanView or whatever. So what do I do? Can anybody please help me?

Well.. there are many different kinds of font files out there. Some of them advertise the type of font in the filename, e.g.
DINBold.otf
DINBold.ttf
DINBold.pfm
DIN.dfont
DIN.ttc
and so on.
Others, typically Mac fonts, don't have a file extension that tells us what kind of file it is. Of those Mac fonts, there's one kind that you can't use on Windows at all, because when you look at it in Windows the size is zero kilobytes. The fact that, at some point in the past, you moved a file from Mac to Windows without font problems does not make a platform-compatibility problem any more or less likely - perhaps it was all set in fonts you already had installed at home. The fact that right now it doesn't work in the Document Fonts folder makes me believe that you may have a Mac font resource fork problem - that's what would make the filesize 0k. If your fonts don't have file extensions (or if you have file extensions hidden by Windows, which is the way Win7 works by default) then you can't really know what kind of font file it is. Looking at the Properties of the font file will tell you, though.
Lastly: since you don't own an (extra) license for the font, you'd be ripping off the font developers by installing it on your home computer, although obviously not intentionally.

How to install Fonts into Adobe Illustrator

I am using a computer that runs on Snow Leopard 10.6.8
Hi there I want to know how to install new Fonts / Typefaces into Adobe Illustrator CS3?
I am also curious as to how I would install fonts on other Adobe CS applications?
All help, links, and resources much appreciated.

I just dragged and dropped the downloaded ".tff" font files into in Font Book icon in theDock and a new window popped up and just click "Install Font" button.
That works, too. Sets are, more than anything else, just a way to organize your fonts by project. By dropping the font in, it should now be listed in one of the standard headings like "Computer".
The new fonts have automatically loaded into Adobe Illustrator CS3 without having to close it.
Better apps will see when fonts have been enabled or disabled without having to close and restart them. Microsoft Word (and likely the entire Office suite) does not.

Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks

Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks

wouldn't it make more sense that a flashtard is someone who
just generally sucks at flash and asks idiotic questions?
anyway, so i pretty much got the banner done - but i'm stuck
on one problem. I made a motion clip of a heart, and i want the
heart to fall from top to bottom, following a squiggly motion
guide, and to rotate 1/4 turn on the way. I got it as far as
following the motion guide, but when i try to select the instance
in the first frame and rotate it, shouldn't the motion tween make
it appear to slowly rotate, rather than stay put then rotate 1/4
turn at the last frame? When I select the clip and play around with
alpha and stuff, that works fine. What the heck?

I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

You just install it in the OS.
Photoshop gets the fonts from the OS.

How to install Air 3.9 SDK into FB 3.7

I cannot understand why Adobe doesn't make installers to update the SDK's more automatically. I have broken apps because of iOS 7, and must use the 3.9 AIR SDK to fix this problem, and resubmit my apps. What is so frustrating is to download the 3.9 Beta SDK, but have no clear instructions on how to install it into FB 3.7. Why isn't there an installer? How can a company with the massive brainpower of Adobe be incapable of writing an installer that figures out where to put the SDK?
In my FB preferences panel, under "installed AIR SDK" the field is read-only. And it refers to a folder AIR SDK location: /Applications/Adobe Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK .
And if I am just make AIR apps, do I need to be concerned with Flex? Is flex somehow related to making iOS and Android Apps in AIR? The relationship of Flex is so murky.
Do i do an overly into the 4.6 folder ?
Is there a newer version of FB yet?

I have downloaded the "AIR 3.9 SDK & Compiler Beta", unzipped it and copied these files into the com.adobe.flash.compiler_4.7.0.349722/AIRSDK folder - that means a bunch of files have been replaced. (I couldn't run the command line in the Terminal, it was giving me a "can't get real path for source" error).
Anyway, i'm NOT a Mac user, I updated to air 3.9 on Windows without problems - all I had to do was to replace air files in the sdks/4.6.0/ folder. Why must Mac be this complicated? ><
and another question: isn't that 'tutorial" incomplete? what about the actual flex SDK that has AIR merged into it? for sure that needs to be updated, as well, so why isn't there anything about it?
EDIT: I did succeed in the end. The problem was Mac replacing files the wrong way if you're not using the Terminal. I got it to work in the end (the Terminal), and I have used the rsync command to replace the files. For anyone still having problems with this, here's what I did:
1. update the AIR SDK
- duplicate your "AIRSDK" folder located at /Flash Builder 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/ and rename it to something like "AIRSDK_backup"
- download and unzip the AIR 3.9 SDK & Compiler Beta [link]
- in the Terminal, navigate to the unzipped folder of the downloaded file, and run this command:
rsync ./* -avl /Applications/Adobe\ Flash\ Builder\ 4.7/ecplise/plugins/com.adobe.flash.compiler_4.7.0.349722\AIRSDK/
2. Update the Flex SDK
- duplicate your "4.6.0" folder located at /Flash Builder 4.7/sdks/ and rename it to something like "4.6.0 (3.9)"
- download and unzip the AIR 3.9 SDK for Flex Developers [link]
- in the Terminal, navigate to the unzipped folder of the downloaded file, and run this command:
rsync ./* -avl /Applications/Adobe\ Flash\ Builder\ 4.7/sdks/4.6.0\ (3.9)/
That's it! Hope this helps anyone who is still stuck.
For Windows: skip step 1 entirely and just copy/paste (replace existing files) the "AIR 3.9 SDK for Flex Developers" in /Flash Builder 4.7/sdks/4.6.0/
p.s. adobe forums login is broken on Chrome.

How to install FLEX in SAP WAS and How to deploy project into SAP EP ?

Hi.
I want to create SAP EP Contents using FLEX and I have serveral question about this.
1. How to install Flex into SAP EP and What do I have to install ?
2. When we developing SAP EP Contents using FLEX,
Which Tool do I have to use ? (NWDS or Flex Builder)
3. After we develop contents, How can I deploy into SAP EP and
How to create iView for Flex Application ?
Sorry for many question.
Kindly explain this.
Regads, Arnold.

Hi Arnold,
here my answers to your questions:
1) You don't need to install flex under EP, you need only adobe flash player 9 on EP
2) If you want to develop a SAP Ep cont using Flex, you need adobe flex builder 2 or 3 (ide based).
3)You can store under any EP folder (es. KM) the .swf object and html page of FLEX application, create an iView and call the url link
or load the .swf as mime object in BSP on backend syst, include in a bsp page and create iView for bsp..
Regards
Raffaele

[SOLVED] texlive2k8 -- how to install omega into $HOME?

Hi folks!
Because the omega-collection is declared obsolete and therefor no more provided in texlive2008. That's bad, because I used it with tl2k7, and though I appreciate xelatex and cjklatex, I still need lambda very badly. So I want to have it installed it now in $HOME for several reasons:
* I could probably install it systemwide as root somehow, but I'd like to avoid conflicts with pacman...
* ...as omega shouldn't be overidden by systemwide tl-package-updates
* I want to have one specific user make use of it
* I can 'take it with me' (like the whole $HOME-dir) then so that I mustn't isntall it again, just to copy and rehash it (somehow) after setting up a new linux- or tl-system.
-- And yes, I haven't any experience yet on how to install external latex-packages, so hence omega is a "collection" makes it even more difficult for me~
The destination dirs should be ~/.mytexmf (bec. I'd like to have it hidden) and ~/.texlive/*. Therefore I edited /usr/share/texmf/web2c/texmf.cnf like this:
% TEXMFHOME = ~/texmf % default
TEXMFHOME = ~/.mytexmf
TEXMFVAR = ~/.texlive/texmf-var
TEXMFCONFIG = ~/.texlive/texmf-config
TEXMF = {$TEXMFCONFIG,$TEXMFVAR,!!$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST,!!$TEXMFDOC,$TEXMFHOME}
(I don't know really the meaning of adding !! and if it's necessary here; I read somewhere, that !! makes a directory 'ls-R'-able, but then users tend to forget to update it also and that's why that should be avoided.)
The first problems arise here, because a $ texhash still returns
texhash: /usr/share/texmf: directory not writable. Skipping...
texhash: /usr/share/texmf-config: directory not writable. Skipping...
texhash: /usr/share/texmf-dist: directory not writable. Skipping...
texhash: /usr/share/texmf-doc: directory not writable. Skipping...
texhash: /usr/share/texmf-var: directory not writable. Skipping...
texhash: Done.
though the my paths are correct and even the exports included into ~/.bash_profile:
$ kpsewhich --var-value=TEXMFCONFIG ((aka kpsexpand '$TEXMFCONFIG'...))
home/myuser/.texlive/texmf-config
$ kpsewhich --var-value=TEXMFVAR
/home/myuser/.texlive/texmf-var
$ kpsewhich --var-value=TEXMFHOME
home/myuser/.mytexmf
Next point: The easiest way would be to run tlmgr for instaling the omega-collection, but either it is (still) not existing within the Arch-TL-installation (couldn't figure out that here or find it in AUR) -- or I'm just to stupid to find and to launch it; I also couldn't run it from a mounted texlive2008.iso yet -- but if, how would the iso's-tlmgr know about my installed texlive-system? Nevertheless tlmgr probably wouldn't find the necessary files (though there's some data with 'omega') on the tl2k8-iso, it could install it properly from an external place.
Then I mounted my old tl2k7.iso and went to the mountpoint for executing $ sh install-pkg.sh --collection=omega, with similar errors:
/bin/tar: texmf-dist/fonts/afm/public/omega/omseco.afm: cannot execute open: file or directory not found
/bin/tar: texmf-dist/fonts/afm/public/omega/omsecob.afm: cannot execute open: file or directory not found
/bin/tar: texmf-dist/fonts/afm/public/omega/omsecobi.afm: cannot execute open: file or directory not found
/bin/tar: texmf/lists/omega: cannot execute open: file or directory not found
/bin/tar: texmf/tpm/bin-omega.tpm: cannot execute open: file or directory not found
/bin/tar: texmf/web2c/omega.pool: cannot execute open: not authorized
/bin/tar: exited because of preceeding errors.
install-pkg.sh: line 213: /usr/share/texmf-config/tex/generic/config/language.dat: not authorized
mktexlsr: /usr/share/texmf: directory not writable. Skipping...
mktexlsr: /usr/share/texmf-dist: directory not writable. Skipping...
mktexlsr: Done.
updmap: config file `updmap.cfg' not found.
PLEASE RUN texconfig or texconfig-sys to make new formats.
(texconfig --rehash/texhash [as user or root] didnt't make any difference.)
I also tar-ed omega
$ sh install-pkg.sh --package=omega --archive=/home/myuser/.mytexmf/_tl-omega_rc/omega-sty.tar
and extracted it into the appropriate directories within ~/.texlive and ~/.mytexmf and made symbolic links into /usr/bin for lambda and omega. But again 'of course' texhash (as user or root) didn't show any effect~
I hope everthing is understandable.
So how can I install omega/lambda in $HOME via install-scipt or tlmgr (if it exists and I can get it to run)?
Any hints? -- Thanks very much in advance!
Last edited by nexus7 (2009-01-11 19:35:58)

nexus7 wrote:Next point: The easiest way would probably be to run tlmgr for instaling the omega-collection, but either it is (still) not existing within the Arch-TL-installation (couldn't figure out that here or find it in AUR)
Well, tlmgr is of course on the mounted iso TL2k8 (just mixed s.th. up~), but it does not start:
# /mnt/bin/i386-linux/tlmgr
Can't locate TeXLive/TLPOBJ.pm in @INC (@INC contains: //tlpkg /usr/lib/perl5/site_perl/5.10.0 /usr/share/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current .) at /mnt/bin/i386-linux/tlmgr line 33.
BEGIN failed--compilation aborted at /mnt/bin/i386-linux/tlmgr line 33.
where line 33 is this:
use TeXLive::TLPOBJ;
and I don't know what to do here~
And neither works installing from the mounted TL2k7-iso, even when I try to install omega/lambda into my main texmf:
# sh install-pkg.sh --collection=omega
(ignoring dependency on collection collection-basic)
cat: language.*.dat: file or directory not found.
mktexlsr: Updating /usr/share/texmf/ls-R...
mktexlsr: Updating /usr/share/texmf-dist/ls-R...
mktexlsr: Done.
updmap: config file `updmap.cfg' not found.
PLEASE RUN texconfig or texconfig-sys to make new formats.
texconfig-sys makes no change. But this is funny because there are several 'updmap.cfg's:
# locate updmap.cfg
/home/myuser/.mytexmf/home/myuser/.texlive/texmf-config/web2c/updmap.cfg
/usr/share/man/man5/updmap.cfg.5
/usr/share/texmf/web2c/updmap.cfg
/usr/share/texmf-config/web2c/updmap.cfg
(and I wonder why this directories and files indeed exist~:
/home/myuser/.mytexmf/home/myuser/.texlive/texmf-config/web2c/updmap.cfg
I ran mktexlsr in my specific directories in HOME again though i don't know if this is really necessary, with the same result: these directories are not recognized, only those in /usr/share...
Tried then
# fmtutil --byfmt lambda
# fmtutil --byfmt omega
but with no output.
Edits from my /usr/share/texmf/web2c/texmf.cnf:
TEXMFMAIN = /usr/share/texmf
TEXMFDIST = /usr/share/texmf-dist
TEXMFLOCAL = /usr/local/share/texmf
TEXMFSYSVAR = /usr/share/texmf-var
TEXMFSYSCONFIG = /usr/share/texmf-config
% TEXMFHOME = ~/texmf % default
TEXMFHOME = ~/.mytexmf
TEXMFVAR = ~/.texlive/texmf-var
%TEXMFCONFIG = ~/.texlive/texmf-config
TEXMFCONFIG = /usr/share/texmf-config
TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFDIST
VARTEXFONTS = $TEXMFVAR/fonts
TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST,!!$TEXMFDOC,$TEXMFHOME}
WEB2C = $TEXMF/web2c
TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
% These defunct engines are not provided for Arch Linux:
% -- deleted %% at these lines for enabling omega/lambda-functionality:
TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}//
TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}//
Excerpt of ~/.bash_profile:
export TEXMFHOME='home/myuser/.mytexmf'
export TEXMFVAR='/home/myuser/.texlive/texmf-var'
export TEXMFCONFIG='/home/myuser/.texlive/texmf-config'
Ugh, this is strenuous~

How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

How to install CS5.5 into Macpro OS 10.8 Mountain Lion? anyone please help

HT1338 How to install Norton 360 Everywhere into my Macbook Pro as it needs Mac OS x 10.7 ?

How to install Norton 360 Everywhere into my Macbook Pro as it needs Mac OS x 10.7 ? I can't install it into my Macbook Pro and how can I solve the problem ? Thanks.

The solution is not to install Norton at all. Use the search feature to read about it.

How to install Java3d into netbeans 6.5

I recently downloaded the Java 3D file : j3d-1_5_2-xxxxxx but I don't really know how to "install" it. I looked and found a thing on how to insall it on netbeans but the place they are telling me to go to doesn't exist. I am using netbeans 6.5 and supposedly you are supposed to install the J3D.nbm or something into netbeans but i can't find that inside of my downloaded folder. Is there something I did wrong i.e. downloaded the wrong thing, are looking in the wrong place, are missing somthing please tell me.
Thanks
Thimbletack

Just posting an update. I found that a place that says you need to go here to download the module for netbeans to install it:
http://java3d.netbeans.org/
but that doesn't reallys show how to install java 3d or anything, it doesn't even have a download button for the module. I got that information here:
http://java3d.j3d.org/faq/editors.html
but i really just don't know how to install this thing. Can anyone help?

How to install 9ifs into 9idb with 9iAS 1.0.2.2.2a in window 2000?

Anyone know how to install 9ifs into 9idb with 9iAS 1.0.2.2.2a?

Hi,
9iFS must be installed in an 9i home type. So you must have it installed in a single box in your 9i DB home. You must use the Apache server of the DB, because the installer will modify the configuration files of this Apache, not this of 9iAS.
After just modify the port the 9i apache is listening (use 81 instead of 80 for example).
Be careful that if you install a new apache for the 9i database, your vw_gateway_cfg environment variable will be changed and will point to the 9i home instead of the 9ias home. So you have to change it back to your 9iAS home if you want to use the portal !!!!
Regards
Pierre

How to install toolkits into LV 8.0 DS-PCE when 7.1 version is still installed

Similar Messages

Maybe you are looking for