How to install USB modem MF110 ZTE to work in RDS network in Romania, on Mavericks?

Please help me!:)

How to install USB modem ZTE MF 110 to work on Mavericks, in RDS network, in Romania? Somebody knows? Please help me! Thanks a lot!

Similar Messages

  • How can i unlock an iphone to be worked on all networks ??

    How can i unlock an iphone to be worked on all networks (in egypt)??

    If the carrier tells you that they do not unlock iPhones, then there is nothing you can do other than sell the iPhone to someone who can use it with that carrier and purchase an iPhone that is officially unlocked.
    Regards.

  • TS3276 How can i unlock an iphone to be worked on all networks ??

    How can i unlock an iphone to be worked on all networks ??

    this is the 10.7 forum (OS X for macs).  Post your question in the iPhone forum.

  • How to install usb to serial emulation driver

    HI all!
       I am trying to develop one application which communicate to embedded system via USB. I would to get your thought about how to install third part USB to Serial emulator in PC when the application is installed in the PC. ( Normally it is done by device manager and update driver). I am using LV11 sp1.

    I am afraid the is no .exe avilable. but there is .inf file avilable. Is it possible to infom window about it in labview. When i install the application and  plug the device using USB window  recognises the device but no comport it shows. When i update the driver by righght click device manager then lv application can perfectly communicate with the device. I want to avoid the step of updating the driver. I want the lv automatically update the drive when instlled.

  • How to install USB flash drive in windows 7

    Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.   

    Hi,
    Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
      http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&​cc=us&docname=c00033108
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • USB modem issues on MacBook Pro (UK 3 network) - keeps trying to install!

    I've a 3UK USB E160G modem on PAYG that I use with my MacBook Pro (late 2008). Device is installed and works no problems. But each time I connect it, it starts the installer again. At first it was no big deal, just exit out of it, but its really starting to bug me now. Can anyone here advise if I can stop this happening and how? Im using Leopard on 10.5.5
    Cheers!

    I did try that unfortunately, but I can't even get the 'df' command to display the partitions.  So the 'find' command doesn't work and running grub-install simply gets me something like 'file not found'
    Chakra also failed, so I may be headed back to Ubuntu.  I love the hardware side of my mac, but am so freaking tired of dealing with EFI. 
    After 6 months of 'easy' linux I thought I was ready for something a bit more challenging, but I guess I am not up to the task.

  • How to install Firefox OS on ZTE Open C?

    I've purchased ZTE Open C on Ebay, and it has arrived today, but it's got Android OS instead of Firefox one - how can I install FF OS on it?
    Another thing is that in settings it says the model of my phone is Kis 3 and not Open C - is this correct?
    Thanks for any help.

    Hi bazujewicz,
    It seems that the Ebay seller may have sent you the wrong item. You should contact the seller to inquire about an exchange to the correct cell phone device.
    This link shows how to manually update and flash a ZTE Open C:
    * [https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/ZTE_OPEN_C#.22Manual.22_updates Manually Update a ZTE Open C]
    However - since your phone may be a different model, it could end up bricking and voiding warranty on your device.
    Please contact the seller and the appropriate Ebay channels for further support.
    - Ralph

  • How to install external modem on Solaris 10 x86

    hi guys,
    need to have my latest USR Courier V.Everything external modem installed under Solaris 10 x86 for using with Hylafax as a fax.
    the question is how do i actually install it? tried googling, but found it a little difficult to find anything on the subject.
    pls advise
    many thanks!

    Rather than explaining it all here go to this URL ...
    http://www.sunhelp.org/unix-serial-port-resources/

  • How to install usb-9162 for diadem

    Hi all,
    I want to install a Hi-Speed USB Carrier "NI USB-9162" with a NI 9215A for Diadem.
    I did this:
    Install the software from CD (driver and max...)
    Plug in the hardware in USB (Hardware found)
    Reinstall / Update my Diadem 9.1 to 9.1 sp2c
    Configure the hardware in "Measurement & Automation" v4.0.0.3010
    I see my device in devices.
    I created a voltage-task with 4 channels, continous, 1kHz
    I started Diadem - DAC and thought, that I could use the icon for NI-DAQ Input, but a doubleclick shows an error.
    see Attachment
    I think, I forgot anything - perhaps a dll...!?
    I couldn't find any help for this hardware for using in diadem on CD.
    greets Andreas
    Volkswagen AG
    Wolfsburg - Germany
    Attachments:
    error.gif ‏17 KB

    Thx again Johannes,
    I downloaded and installed it. But under devices in MAx there is only the mx-device. (see Attachment: Max3.gif).
    I tried to create a new traditional device but there I couldn't find my device (see Attachment: Max4.gif).
    I started DIAdem and clicked to the icon - no error message, but the Max-signal-list is empty.
    I added a channel in that list and started my DAC. But then there comes an error-message that this signal isn't defined in Max.
    So where can I do that and how?
    greets Andreas
    Volkswagen AG
    Wolfsburg - Germany
    Attachments:
    max3.gif ‏109 KB
    max4.gif ‏39 KB

  • How to install USB driver for Windows?

    I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
    After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
    When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
    There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
    Can anyone make sense of this for me?

    Orthoducks wrote:
    I'll so my best to answer the questions.
    >...what you're looking to do a transfer with...?
    Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
    Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
    >Also, have you tried any other computers?
    No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
    Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
    >And which software version if your phone currently running?
    That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
    Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
    >Often times, the device drivers you're prompted to install are supported solely by the computer's software.
    I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
    You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
    The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
    Good Luck

  • How to install USB card in Mac OS 8.6?

    Recently, i buy a new printer. the printer only can use USB connection. My MAC is MAC 8500/1800. It is no USB port. i added a USB card. But it is not work. I find information on internet. It need installed a software(USBSupport1.4.1smi.bin). I downloaded the software. But it can not open. i hope some people can help to solve the problem.
    Thank you very much for your help.

    Hello tytom2003,
    Welcome, and Happy New Year!
    First, make sure your printer and USB card are Mac compatible.
    Second, you will probably have to re-install your Operating System in order for your Mac to "see" your USB card. You cannot install the proper USB and USB support extensions by downloading them, because your Operating System will not "see" them, will not recognise them.
    You should perform a "clean reinstall" (also known as "archive and install") from your original installation CD - or from a retail, full install CD, with the USB card installed in its PCI slot. Your Mac will now automatically "see" or recognise the USB card, and will see the need to install the USB extensions.
    By doing a "clean install", you will have a newly installed System Folder and the old, disabled 'Previous System Folder' next to it. You will not lose anything, as all your old applications and documents will be saved in the 'Previous System Folder' where you may retrieve them and drag them over to your new System Folder.
    I assume you are running OS 8.6, but it doesn't really matter. The OS CD will install the correct USB extensions. (An OS9 CD might install 1.4.6 extensions - whatever it installs should work).
    I did not have your exact model, but rather a 7300 and several beige G3s, but the procedure is all the same.
    It is also possible to do a 'Custom Install' or install by 'Tome Viewer' utility.
    Let us know if it works.
    I hope to have been of some help. It will have been an honour.
    Jon
    Message was edited by: Jon Smith

  • How to install USB-RS232 connector

    I want communicate zebra printer with USB-RS232 cable, somebody say, if i install the USB-RS232 connectly, it will appear virtual serial port in MAX, is it right? do i need to download NI-Serial driver?

    :-) congradulations

  • How to install usb driver 2.0 on the p45 neo3 mother board?

    ok my promblem is that some how there are no usb drive for window xp 64 ? so how do be able to use my flash driver or game controller.....DOES ANYONE KNOW HOW TO FIX THIS?
    system spec:
    window xp 64 bit
    board: intel p45 neo3
    cpu: core duo e7200
    video : nvidia geforce 8600gt
    plzzz help....

    i check the bios the usb port are all enable
    here are my system spec:
    System Information
    Time of this report: 8/16/2008, 02:41:56
           Machine name: TIQUILA
       Operating System: Windows XP Professional x64 Edition (5.2, Build 3790) Service Pack 2 (3790.srv03_sp2_gdr.070321-2337)
               Language: English (Regional Setting: English)
    System Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
           System Model: MS-7514
                   BIOS: Default System BIOS
              Processor: Intel(R) Pentium(R) III Xeon processor (2 CPUs), ~2.5GHz
                 Memory: 2048MB RAM
              Page File: 486MB used, 3480MB available
            Windows Dir: C:\WINDOWS
        DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
         DxDiag Version: 5.03.3790.3959 32bit Unicode

  • How to install USB mouse?

    I have looked for the answer all over the place. Can you connect a USB wireless mouse to a MacBook Pro? It is not a bluetooth mouse, just USB-- nothing fancy.
    I cannot figure this out for the life of me. Please help!
    Veronica

    There is a part of the device that plugs into one of the USB ports on the side of the Mac. Then you need to put batteries in the mouse itself and then turn it on. There should be a little switch on the bottom of the mouse to turn it on and off (Make sure you turn it off when you are not going to use it for a extended period of time. Otherwise the batteries will go dead on you).
    There should also be a littl button on the bottom of the mouse so it can Connect/Sync with the reciever you plugged into the USB port on the Mac. Sometimes you have to use that small button and sometimes you don't for the mouse to connect to the reciever.
    Most Wireles mice also go to sleep on their own to conserve the batteries. So if you walk away from the computer for a period of time and come back to find the mouse isn't moving the cursor on the screen you have to click one of the buttons on the mouse to bring it back to life.

  • MOVED: how to install usb driver 2.0 on the p45 neo3 mother board?

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=119216.0

    i check the bios the usb port are all enable
    here are my system spec:
    System Information
    Time of this report: 8/16/2008, 02:41:56
           Machine name: TIQUILA
       Operating System: Windows XP Professional x64 Edition (5.2, Build 3790) Service Pack 2 (3790.srv03_sp2_gdr.070321-2337)
               Language: English (Regional Setting: English)
    System Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
           System Model: MS-7514
                   BIOS: Default System BIOS
              Processor: Intel(R) Pentium(R) III Xeon processor (2 CPUs), ~2.5GHz
                 Memory: 2048MB RAM
              Page File: 486MB used, 3480MB available
            Windows Dir: C:\WINDOWS
        DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
         DxDiag Version: 5.03.3790.3959 32bit Unicode

Maybe you are looking for

  • USB ports have power but no data connection

    Hello I have a HDX 16-1040 US HP, PORTS External Ports * 5-in-1 integrated Digital Media Reader for Secure Digital cards, MultiMedia cards, Memory Stick, Memory Stick Pro, or xD Picture cards * 4 Universal Serial Bus USB 2.0 * 1 VGA (15-pin) * 1 HDMI

  • Upgrading weblogic 8.1 to jdk1.5.0_04

    Has anyone performed this upgrade? Are there any known issues with this upgrade?

  • I cannot import some of my RAW images from my camera

    I have a Leica D-Lux 4, and I am having problems uploading some of my RAW images to aperture. I have aperture 3.0.3 and I don't believe I should be having this problem... so any help is appreciated!

  • Can't install installer update

    hi everyone, my beige g3 died, so i got another off ebay, it arrived in a shocking condition. however with a new pram battery,new 40gb hd in 3 partitions, memory at 416mb, 9.2.2. on 2nd partition, 10.1 on 1st partition, its humming along except i can

  • Ethernet looses Connection Boot Camp WinXP

    Hi, I am running Boot Camp with an XP installation. My Ehternet connection is very unstable. When I ping some address like www.apple.com, www.yahoo.com, www.google.com I generally see that a lot of packets are lost (from 1 out of 4 to 3 out of four,