How to install video card - G450 for solaris8

hi everbody:
when i installed solaris 8, the supported video card driver list didn't contain the G450, so i got the patch from sun website, the driver patch looks like 109401-11,is it right?
and then how can i do next?? BTW,I still fail to install solaris8 because of missing driver G450.

you can install it without the CDE,log on as root
use patchadd command to install the patch
run kdsconfig to test the the screen to see if it can work properly. Then reboot.
hope this can help.
Good luck

Similar Messages

  • How to install video card driver?

    I download a video card driver, after uncompress, i have 6 files as below:
    glx.so
    libGL.so.1
    riva_install
    libGL.so
    LibGL.so.1.0
    XF86_SVGA
    It seems that only riva_install and XF86_SVGA is executable files, so i run them. But there are some problems cause i can not continue:
    1. when i run riva_install, screen displays:
    Enter path to the X server tree.
    If unsure, press <Enter>.
    -n Path [usr/X11R6] :
    Then i press <Enter>, it displays as follow:
    /My_Download/VideoCard/X-GLX-libc5-i386-dyn/riva_install: test: argument expected
    At this point, what should i input?
    2. When i try to run XF86_SVGA, screen displays:
    XF86_SVGA: Cannot find /lib/ld-linux.so.1
    3. I use netscape to view webpage. Usually when i open a new page, netscape always ask me to install cookies again and agin, i press ok, and next time, it still ask the same question, even i press ok for N times to accept install cookies.
    Could you please kindly answer me?
    Thanks
    Joanna

    After run kdmconfig, i have following description:
    Video Device: NVIDIA RIVA TNT2 (32MB)
    Screen Size: 16-inch (41cm)
    Resolution/Colors: 1024x768 - 256 colors @ 85Hz
    Which means the system recognize my video card, i don't need to install extra driver for that, right?
    But how come i can't see picture clearly?
    And whenever i open a new page, netscape often ask me to install cookies again and again?
    Thanks
    Joanna

  • How to install video card?

    I have just received a *Mac nVidia GeForce 4 Ti 4600/Ti4600 128MB Video Card for G4* I ordered on eBay, and am seeking advice before installing.
    No instructions or CD came with this item, so do I just remove the card that's in my MDD and install this one? Any slot preferred? Any drivers or firmware to update?
    Also, I've read that a 300w power supply is recommended for use with this card, but I am unable to locate specs. for my machine. I assume its present power supply will suffice.
    thanks

    so do I just remove the card that's in my MDD and install this one?
    Yes.
    Any slot preferred?
    Use only the AGP slot.
    Any drivers or firmware to update?
    Remains to be seen, but OS X should support it.
    I assume its present power supply will suffice.
    You have either a 360w or 400w PSU in the MDD.

  • How can I switch between 2 installed video cards?

    I have an HP Pavilion dv7-6135dx Entertainment Notebook PC, Windows 7 64-bit. It has two video cards, one is a Mobile Intel(R) HD Graphics card attached to the motherboard, the other is an AMD Radeon HD 6490M video card meant for gaming. The problem is that the computer and all the games and software I install on it only pickup on the Intel HD card, not the Radeon. I have the Catalyst Control Center for the Radeon card and it shows up in the device manager meaning the computer recognizes the card, but I can't download any drivers for the Radeon card from the Internet and nothing else seems to recognize it. This Radeon card series, 6400M, has OpenGL 4.1 and 3D graphics, the amd.com site specifically states this, but games with 3D or which require OpenGL, such as Bethesda's Brink, won't play. The errors say my graphics card does not support 3D or, in Brink's case, it doesn't have OpenGL 3.1 or higher. I'm assuming something is blocking the Radeon Card from working or I need to set the computer to use the Radeon card 24/7. Any help what so ever would be very much appreciated.

    Yes I just used HP to install the drivers. It worked unlike the AMD website, but it still doesn't seem to be working. It has all the updates now, but games stil don't seem to recognize the Radeon card, just the Intel HD video card.

  • How to install videos and movies on to i touch

    i am not able to get any video files on to my i touch.it is giving a message that this format cant be played on your i pod.how to install videos and movies on to my i touch

    Videos must be in a format that iTunes and the iPod can accept. See:
    http://support.apple.com/kb/HT2729?viewlocale=en_US
    If your videos are not on the appropriate format, you'll have to convert them. Search this forum for "video convert" and you should find a number of threads about converting videos for use with an iPod.
    Regards.

  • Getting the name of the installed video card

    I'm trying to discover if exists any way in java to get the name (ATI, nVidia, Creative) and other properties (version,memory size,...) of the installed video card where the jvm is running.
    Thanks in advance,
    Joan

    Definitely not directly with Java APIs....
    2 approaches...
    1. get another external program to do the work for you, and export it to a text file.
    then you parse then text file.
    On WinXP, there's a program called msinfo32.exe in
    C:\Program Files\Common Files\Microsoft Shared\MSInfo
    type msinfo32 /? for a list of command line options.
    Looks like you can route it to a text file.
    2. Write a low level JNI library in native Windows C++, which somehow finds that hardware specific information from the Windows API.
    regards,
    Owen

  • How to install video Integration component

    Dear Experts
    Link how to install video Integration component
    https://websmp106.sap-ag.de/~sapidb/011000358700000739542010E/index.htm
    Regards
    Carlos Farías

    It says
    To install this component, just drag the File "XviD_Codec 1.0 alpha.component" into Library/QuickTime. The Library directory can be found either at your home directory (to install just for the actual user) or at the top-level of your startup volume (this needs an administrator account). DO NOT PUT IN: /System/Library/QuickTime.
    Sounds normal to me. The "~/Library/QuickTime" folder is the standard location for user and application installed QT components which are used globally by all account users. On the other hand, the "~/System/Library/QuickTime" folder is where QT components installed by the operating system installer are placed for global use. These instructions appear to be correct.
    It is possible that the QuickTime directory does not yet exists. In that case you can create it yourself. Pay attention to capital letters if you use a case sensitive file system (i.e. UFS).
    I do not have Library/Quicktime.
    Highly unlikely if you are running Mac OS X V10.5.8 as indicated in your posting. As you can see here, when the startup drive is opened at the root level, you should find a minimum of four folders—the "Applications" folder, the "Library" folder, the "System" folder, and the "Users" folder. Without these folders, your computer would be little more than an electrified paperweight.
    I do not have Library/Quicktime.
    Either you are looking in the wrong place or someone has been playing around on your system (e.g., in the Console app) and made the folder invisible.

  • How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439

    An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
    1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
    2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)  
    3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
    4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
    5 - Then to open the app execute it: ./LenovoEMCStorageManager
    Video Tutorial
    How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
    In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
    Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
    Attachments:
    lenovoemcstoragemanager.jpg ‏27 KB

    Hello everyone ,
    I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install  the LenovoEMC storage Manager but it failed  :
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    Launching installer...
    Graphical installers are not supported by the VM. The console mode will be used instead...
    Preparing CONSOLE Mode Installation...
    ===============================================================================
    Choose Locale...
        1- Deutsch
       ->2- English
        3- Español
        4- Français
        5- Italiano
        6- Nederlands
        7- Português  (Brasil)
        8- Svenska
    CHOOSE LOCALE BY NUMBER: 2
    =======================================================
    Installer User Interface Mode Not Supported
    The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
    =======================================================
    Is it still aproblem with the 64 bits architecture ?
    Have you find any solutions ? Thank you very much

  • How can install adobe flash player for windows 8 pro internet explorer

    how can install adobe flash player for windows 8 pro internet explorer
    how can instal flash player for internet explorer metro ui 
    where can i watched video tutorial for this or help me please

    I can't tell from the screenshot, but it's possible you are running in the Metro version.  Could you try this page using Internet Explorer in desktop mode to see if that helps?
    right click in the browser and click the tools button
    In the menu that appears, select "view on the desktop"
    Once IE launches in the window, do you see your Flash content?

  • How to install lan card in solaris 11

    Hi,
    can some one please tell me how to install lan card in solaris nevada snv_55b X86, 5.11
    When i do ifconfig -a it only displays loop back driver only
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    The other driver was missing can please some one tell me how to install that?

    Well, the lan card has to be one that is supported by Solaris and you need to have the proper driver installed before you'll be able to get it running. A good starting point would be to look at the Solaris Hardware Compatability List (HCL) at:
    http://www.oracle.com/webfolder/technetwork/hcl/index.html
    There is a blue box which says "Check out the X86 device list" which may be a good place to start. You won't be able to pick out Solaris version you're running for the OS type menu but if you can find the device anywhere you should at least be able to determine which driver it uses so you can check that against your system. If you don't have the driver package installed, you'll have to install it before you can see the device. If course, if the device isn't supported you're stuck. At least the HCL can help you select a new interface card which should work.

  • Video Card Recommendation for Power Mac G5 Quad

    Can anyone recommend a video card upgrade for my Power Mac G5 Quad?
    I am now running the nVIDIA GeForce 6600 card that came in the machine, but I'm wondering how much performance increase I'll see with a large image library in Aperture if I upgrade. I'm interested in all comments.
    Also, is there a "medium" upgrade and a "kick-***" upgrade?
    Thanks!
    G5 Quad / 4.5GB   Mac OS X (10.4.8)  

    I hate to say it: At the moment there is no graphics card upgrade available for the G5 Quad and the other PCI-Express Power Macs. There are a lot of threads about this topic in this forum. It is simply a shame that Apple does not offer any graphics upgrade for their former top of the line machines - but they do offer them for their new Intel Mac Pro. Maybe one day ATI will offer an upgrade, but at the moment this is just a rumor. All you can do now is to buy a reflashed PC version of the GeForce 7800 or buy a ridiculously priced spare part GeForce 7800 from a store who is willing to sell you one (there is one on the web but i forgot the url).
    Power Mac G5 DualCore 2GHz   Mac OS X (10.4.8)  

  • What are the video card requirements for running a 23" cinema display

    What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
    Intel P4 3.0ghz   Windows XP  

    Hi Lionel,
    As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
    I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
    A good place to start looking for answers is:
    http://cubeowner.com/kbase_2/
    Cheers!
    Karl

  • How to install adobe flash player for microsoft rt surface

    how to install adobe flash player for microsoft rt surface

    Should already be enabled in IE on Win 8 RT
    http://blogs.msdn.com/b/ie/archive/2013/03/11/flash-in-windows-8.aspx

  • Where to download and how to install X Window System for Oracle Linux 5 ?

    Folks,
    Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
    Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
    But I don't know where to download and how to install X Window System for Oracle Linux 5.
    Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

    You can address the problem in a number of different ways.
    You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
    Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

  • How to install the live cache for oracle DB

    Hi,
    How to install the live cahe for the oracel DB.
    We had the SCM Dev system with oracle database.Now we are planning to install the live cahe on the same DB.Is it possible?
    Plz give the appropriate steps.
    Regards,
    Siva.

    Thanks for your response.
    i understood that live cache is a product it will be applicable to any DB's.
    i need to install the live cache from the existing system(Running with oracle DB)
    Plz guide the procedure.
    Am I going in a wrong direction?Plz guide.
    Thanks,
    Siva

Maybe you are looking for

  • Downloading/Opening a Presenter File on a Mac

    Hello, We design educational programming and have used Adobe Presenter for as long as we've been in operation in order to deliver slides that teachers can download to use in their classroom, but that are also delivered in a secure way. Here is an exa

  • How do I determine the order of photos displayed in slideshow?

    I'm using my ipod to teach art, using a dlp projector. I've got pictures sorted by topic. But I need to know how to organize the photos to display in the order I want them to. Can you help? Thanks! Mike

  • How to Specify and Particular Printer?

    I have a simple one page form with a print button (that was or originally created in LiveCycle) that we have been using with Acrobat (For distribution pruposes). What I'd like to do it specify a particular network printer for output when a user click

  • Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?

    Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor? I use a Mini as the family media center and would like to have 5.1 or 7.1 sound for films but don't want a huge piece of eletronic equipment (I have one

  • Error in a declaration %type

    hello gurus i have this problem i have a user A (USER_A), with normal privileges (create table, create procedures etc).. from my user A i read a synonym on a table from another user B (USER_B). B is not the owner of the table, the owner is C (USER_C)