How to install VISA after Labview and NI-DAQ are already installed

I have Labview 5.1.1 and NI-DAQ 6.6 installed and running properly. I now find that I need to install VISA. Must I uninstall everything (hardware, NI-DAQ, and Labview) and then run the Labview installation again to install VISA? Or can I just go ahead and run the Labview setup again in order to install VISA?

No, you do not need to uninstall any of your hardware or software to install VISA. There are two ways that you can install VISA.
1. You can modify your installation of LabVIEW by going into Add or Remove Programs in the Control Panel, clicking on LabVIEW and selecting Modify (or Change, depending on your operating system). If you have your LabVIEW CD in the CD drive, you can simply enable VISA support in the Installer Tree. This will install VISA on your computer without modifying the installation of any of your other programs.
2. You can also download NI-VISA from our website and install it. You will probably need a reasonably fast internet connection, but this may be the easier way to install it. The URL for the VISA download page is linked below. Ve
rsion 3.0.1 is the newest and works with most Windows operating systems.
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument
Regards,
Mike N.
Applications Engineer
National Instruments

Similar Messages

  • I have tried installing Livetype 3 times and the Effects are not installed.

    I have tried installing Livetype 3 times and the Effects are not installed. The animated text behaviors are not available. What might I be doing wrong?

    I have tried installing Livetype 3 times and the
    Effects are not installed. The animated text
    behaviors are not available. What might I be doing
    wrong?
    I have the exact same problem! I sent the discs into my local Apple Center so they could check the discs. A month later I get them back by mail and an e-mail that says "there is no problem with the discs, therefore it must be a problem with you system". Not very helpful, and it took forever before they got time to check the discs. Pretty ****** off by now...
    EDIT: It is probably worth mentioning that I get an error when installing LiveType 1B at about 4% of installing, that says "there were errors installing, please try again". I am installing the LiveType content on my LaCie 250GB USB external hard drive, although I have already tried installing the content on the built in hard drive as well..
    Message was edited by: NitRam Den Gale

  • Install MATLAB after LabVIEW and SIT was installed

    I have installed LabVIEW 8.2 and simulation interface toolkit in my computer.
    The problem is I have Matlab 6.1 in my computer and it is not support by SIT so I updated it to the Matlab 2006b.
    In such case I installed the Matlab after I installed the LabVIEW and the SIT. In this way I can find the NI sink or any other NI functions in MATLAB.
    Is there any way to import the SIT to MATLAB besides reinstall SIT?
    If reinstall SIT is necessry, should I just reinstall SIT or should I also reinstall any others? (I have LabVIEW RT, FPGA, Vision module in this computer)
    Thanks,
    -Alex

    Alex,
    You are missing all the files that need to be in Matlab. So, you just need to uninstall SIT and reinstall again. This should fix the location of the files and you can have SIT working again.
    If you run into problems, let me know...
    Barp - Control and Simulation Group - LabVIEW R&D - National Instruments

  • Re-installing Acrobat after uninstalling and doing a clean re-install of the OS

    I purchased Acrobat 8 Standard on 5/16/2007 and saved it to the cloud a few days ago before uninstalling/re-installing XP SP3. My computer tech cautioned me about re-installing the cloud-saved up-to-date version as it wouldn't be compatable with my new user files. He told me to install the 2007 version and then run update within the program. So I ask (having found the location on the Adobe site where I can download), is this going to be the same program I purchased, un-updated? If not, what's my work-around?
    Thanks, RW

    Hi walkerlaw1,
    Am not sure what files you have saved to the Cloud. Is it the setup file or the Folder in your Program Files?
    Adobe recommends archiving the setup file for future use.
    Acrobat 8 Std. is no longer available on our website to download. If you have purchased an Electronic Download (ESD) version from Adobe then you can login to your account on Adobe and find the download link in your Adobe account. Yes, this would be the same program you purchased. And as recommended by your computer tech, you can download and install Acrobat 8 Std. and then run the updater within the program to update it to the latest patch.

  • Installing Oracle BPM suite, when SOA and BAM domain are already installed

    Hi Gurus
    I have installed already Oracle SOA domain now I have to install Oracle BPM suite, How to install it with no effect on already installaton.
    Please guide,
    Aamir

    Hi Aamir,
    Shutdown the database all the servers. Start the configuration wizard again(SOAORACLE_HOME/common/bin/config.sh) and select BPM and finish it. (SOA and BPM share the same schemas)
    Start the servers. Now you can see that BPM is configured with your soa server.
    To check whether everything is fine, login to AdminConsole , goto Deployments and check whether oracle.bpm.runtime(11.1.1,11.1.1) is shown as "Active"
    thanks,
    Murugesh

  • Consequnces of installating IIS after WEBAS and Portal installation

    Dear All,
    I have a query regarding IIS (Internet Information Services) installation a server, where Portal(WEBAS) and other components are already installed.
    If this installation leds to some problems. is there any guidelines for this kind of installation.
    We are having major issues because of this. We have already raised a OSS with SAP. But its already 12 days since we raised this issue and so far no solution has been suggested..
    It will be great if you can share your experiences.
    Thanks a lot for your time,
    Regards,
    Sudhir

    Hi Eric,
    thanks for your reply. before IIS installation i installed IIS. After installation i could not access Portal, Visual admin . even using telnet i could not connect to my J2EE server.. which was really very strange..
    regards,

  • I re-installed Mountain Lion from a USB stick, and now my Apps can't be downloaded.  The App store indicates that the Apps are already installed, but that is not the case. Now what :)

    I re-installed Mountain Lion from scratch of a USB stick, and now my Apps in the App store ca not be installed, the App store indicates that they are already installed, but that is not the case.  Now what?

    Ok, this is somewhat of a better work around I've found:
    Starting in the Australian iTunes store, I go through the process of signing into the UK iTunes store up until the point it asks for my credit card information.
    I then click the 'X' in the top left of iTunes to exit the store.
    Now when I click on my Apps Updates button it shows me what UK Apps I have that are available to update.
    You can't download these as at this point I've changed the store I'm viewing, but haven't officially switched accounts. Not to worry.
    I write down the names of the UK Apps to update.
    Then, use the 'search store' field in the top right of iTunes to search for one of the Apps.
    Once you've found it, click to buy it / download it.
    iTunes recognises that the App is already in your account and downloads it again for free….
    … now I'm HOPING that that App is now fully within my Australian account… unfortunately only time will tell once there is a new update for it.
    I'll let you know.

  • HT1365 How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again

    How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?

    Make sure iTunes on the computer is logged into the account on the phone.
    Plug the iPhone in.
    In the popup window warning about wiping your phone, hit cancel.
    In the left pane of iTunes, the phone icon should be there.
    Right click on it, select transfer purchases.
    Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's.

  • LabVIEW 2010 thinks it is already installed thus preventing me from installing it

    I had 2010 installed before, then a terrible problem with file corruption damaged the installation and now I need to reinstall it.  
    Problem is that no NI installs appear on 'Add/Remove programs' so I cannot 'repair' or 'remove'.  Also when I install from the DVD it thinks 2010 is already installed and just shows 'Currently installing LabVIEW 2010 (English) for a second' and then reports 'No software installed or removed'.
    I've even tried deleting the National Instruments folder from Program Files but this did not help.  
    Any ideas on how I can force a reinstall - maybe I need to modify something in the registry?

    All NI Software is listed as a single entry called 'National Instruments' in the add/remove programs.
    If that is not available, I would try to run msiblast (see here)
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

    Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

    In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
    Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
    I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
    Having 2 versions of ACR will cause problems.
    You have already downloaded DNG Converter 8.7.1.
    Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
    Be aware that DNG converter is a stand-along application and not a plug-in.
    You need to open DNG converter at select the FOLDER that contain your .NEF files.
    Don't open the folder and try to select individual files, it doesn't work that way.
    After converting your D810 files to DNGs you can then open the DNGs in CS5
    The problem is your camera didn't exist when CS5 & its version of ACR was developed.
    i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

  • Updated to LR 5.4, images now importing extremely slow. After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast.

    After importing and rendering images are still very slow to go through and develop. No issues in LR 5.3 which was very fast. Canon,Nikon, Leica and Fuji files all rendering slow. iMac 2.9 ghz 16gb RAM OSX 10.8.5. Catalogs and images are kept on external drives. Drives running fine. Really need a fix on this since I'm norally imported and processing at least 4,000 images per LR Catalog. Is there way to revert back to 5.3? I can't use 5.4 is its current state. Thanks.

    Download LR 5.3 and install it
    By the way, lots of people have this complaint about LR 5.4, and the advice I give is to use LR 5.3 unless you need one of the new camera models supported by LR 5.4

  • My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

    My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?

    Hello, thank you for your prompt answer. I did have an idea that Home sharing might be the answer but could not quite figure out how to do it. I have enabled home sharing in my iTunes account, put in username and password, clicked on creat etc. But the homs sharing icon doew not appear in the left side of iTunes. So I got stuck. Any further ideas?

  • I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are app installed that can not be determined. What should I do?

    I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?

    See these previous discussions:
    not determined
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth?!

    Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
    ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
    obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
    normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!

    ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

  • I bought Lion from the App Store. It installed to my laptop and I would like to install it on another machine. Can I do this without having to buy another copy?

    I bought Lion from the App Store. It installed to my laptop and I would like to install it on another machine. Can I do this without having to buy another copy?

    Try here Mike...
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Make sure and use the same Apple ID.

Maybe you are looking for