How to install web container?

hi every body,
how to install tomcat50-jwsdp.zip .

i read RUNNING.txt but there is one thing i colud not uderstand as folowing:
(1) Download and Install the Tomcat 5 Binary Distribution
NOTE: As an alternative to downloading a binary distribution, you can create
your own from the Tomcat source repository, as described in "BUILDING.txt".
If you do this, the value to use for "${catalina.home}" will be the "dist"
subdirectory of your source distribution.
* Download a binary distribution of Tomcat from:
http://jakarta.apache.org/site/binindex.cgi
* Unpack the binary distribution into a convenient location so that the
distribution resides in its own directory (conventionally named
"jakarta-tomcat-5"). For the purposes of the remainder of this document,
the symbolic name "$CATALINA_HOME" is used to refer to the full
pathname of the release directory.
(2) Start Up Tomcat 5
Tomcat 5 can be started by executing the following commands:
$CATALINA_HOME\bin\startup.bat (Windows)

Similar Messages

How to Install Web Db

Hi Guys, I have Oracle8i veriosn 8.1.6 installed and i am trying to install Oracle Web Db 2.0. When i try do the installation web db asking me to enter the oracle Home. I did enter my oracle 8i home but it give the error message oracle home already exist. I don't how to install web db. Anybody can help me.
Thanks
SR

Hi,
This should make it work. Oracle expects a new home for WEBDB so enter a new name and location
eg name - weddb location - c:\webdb
and follow through.
Hope this helps.
null

How to instal WEB AS for ABAP Edition

HI,
Can any body guide me how to instal SAP WEB AS ABAP edition. I want instal in my PC. I downloaded the 2 files. How to start installation. Wht is the file name?.
In oder to work on WEB AS ABAP Editon is it required have SAP R/3 server?
Thanks in Advance.
Nagesh.

Hi ,
You can find the WEBAS ABAP installation guide from
service.sap.com/instguides
Netweaver -- release 04 and select your database.
Before installing refer to planning Guide under the above link.
Regards
Vijay Kothapalli

How to install web face recognition and one touch rescue point in a lenovo g560 laptop

hi,
can anybody tell me the way how can i install web face recognition and one touch rescue system in lenovo laptops which i purchased with free dos as i am having windows xp license with me,
Regards

you can find and install softwares and drivers from the link below :
http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=67873

How to install WEB PL/SQL?

When I running "Install Web PL-SQL Generator",I got the following errors:
Someone help me, please!
No errors.
No errors.
Package wsglm...
Input truncated to 11 characters
No errors.
Package wsgjsl...
No errors.
Package wsgfl...
No errors.
Package wsgl...
Warning: Package created with compilation errors.
Errors for PACKAGE WSGL:
LINE/COL ERROR
62/22 PLS-00201: identifier 'OWA.VC_ARR' must be declared
62/22 PL/SQL: Declaration ignored
63/22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be declared
63/22 PL/SQL: Declaration ignored
Package body wsgjsl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGJSL:
LINE/COL ERROR
280/7 PL/SQL: Statement ignored
311/53 PLS-00905: object OWNER.WSGL is invalid
334/7 PL/SQL: Statement ignored
344/17 PLS-00905: object OWNER.WSGL is invalid
472/7 PL/SQL: Statement ignored
493/31 PLS-00905: object OWNER.WSGL is invalid
813/10 PL/SQL: Statement ignored
813/22 PLS-00905: object OWNER.WSGL is invalid
828/10 PL/SQL: Statement ignored
828/22 PLS-00905: object OWNER.WSGL is invalid
843/10 PL/SQL: Statement ignored
843/22 PLS-00905: object OWNER.WSGL is invalid
852/10 PL/SQL: Statement ignored
852/22 PLS-00905: object OWNER.WSGL is invalid
861/10 PL/SQL: Statement ignored
861/22 PLS-00905: object OWNER.WSGL is invalid
884/10 PL/SQL: Statement ignored
884/22 PLS-00905: object OWNER.WSGL is invalid
960/3 PL/SQL: Statement ignored
960/15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be declared
Package body wsgl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGL:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object OWNER.WSGL is invalid
1/14 PLS-00304: cannot compile body of 'WSGL' without its
specification
Package body wsgfl...
No errors.
No errors.
No errors.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT1:
LINE/COL ERROR
49/4 PLS-00201: identifier 'HTP.P' must be declared
49/4 PL/SQL: Statement ignored
51/7 PLS-00201: identifier 'HTP.P' must be declared
51/7 PL/SQL: Statement ignored
53/10 PLS-00201: identifier 'HTP.P' must be declared
53/10 PL/SQL: Statement ignored
60/4 PLS-00201: identifier 'HTP.P' must be declared
60/4 PL/SQL: Statement ignored
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT2:
LINE/COL ERROR
36/13 PLS-00201: identifier 'HTP.P' must be declared
36/13 PL/SQL: Statement ignored
42/10 PLS-00201: identifier 'HTP.P' must be declared
42/10 PL/SQL: Statement ignored
48/13 PLS-00201: identifier 'HTP.P' must be declared
48/13 PL/SQL: Statement ignored
53/16 PLS-00201: identifier 'HTP.P' must be declared
53/16 PL/SQL: Statement ignored
59/13 PLS-00201: identifier 'HTP.P' must be declared
59/13 PL/SQL: Statement ignored
64/10 PLS-00201: identifier 'HTP.P' must be declared
64/10 PL/SQL: Statement ignored
70/13 PLS-00201: identifier 'HTP.P' must be declared
70/13 PL/SQL: Statement ignored
87/28 PLS-00201: identifier 'HTP.BR' must be declared
87/28 PL/SQL: Statement ignored
92/25 PLS-00201: identifier 'HTP.P' must be declared
92/25 PL/SQL: Statement ignored
99/13 PLS-00201: identifier 'HTP.P' must be declared
99/13 PL/SQL: Statement ignored
The following synonyms already exist. Please check that they are valid:
OWA
OWA_UTIL
OWA_COOKIE
OWA_IMAGE
OWA_INIT
OWA_OPT_LOCK
OWA_PATTERN
OWA_SEC
OWA_TEXT
HTP
HTF
CG$ERRORS
WSGL
WSGJSL
WSGLM
WSGFL
Webserver Generator Compilation Report
NAME TY LINE COL TEXT
WSGJSL PB 311 53 PLS-00905: object OWNER.WSGL is invalid
280 7 PL/SQL: Statement ignored
344 17 PLS-00905: object OWNER.WSGL is invalid
334 7 PL/SQL: Statement ignored
493 31 PLS-00905: object OWNER.WSGL is invalid
472 7 PL/SQL: Statement ignored
813 22 PLS-00905: object OWNER.WSGL is invalid
813 10 PL/SQL: Statement ignored
828 22 PLS-00905: object OWNER.WSGL is invalid
828 10 PL/SQL: Statement ignored
843 22 PLS-00905: object OWNER.WSGL is invalid
843 10 PL/SQL: Statement ignored
852 22 PLS-00905: object OWNER.WSGL is invalid
852 10 PL/SQL: Statement ignored
861 22 PLS-00905: object OWNER.WSGL is invalid
861 10 PL/SQL: Statement ignored
884 22 PLS-00905: object OWNER.WSGL is invalid
884 10 PL/SQL: Statement ignored
960 15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be
declared
NAME TY LINE COL TEXT
WSGJSL PB 960 3 PL/SQL: Statement ignored
WSGL PA 62 22 PLS-00201: identifier 'OWA.VC_ARR' must be
CK declared
AG
E
62 22 PL/SQL: Declaration ignored
63 22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be
declared
63 22 PL/SQL: Declaration ignored
PB 1 14 PLS-00905: object OWNER.WSGL is invalid
1 14 PLS-00304: cannot compile body of 'WSGL' without
its specification
0 0 PL/SQL: Compilation unit analysis terminated
null

When I running "Install Web PL-SQL Generator",I got the following errors:
Someone help me, please!
No errors.
No errors.
Package wsglm...
Input truncated to 11 characters
No errors.
Package wsgjsl...
No errors.
Package wsgfl...
No errors.
Package wsgl...
Warning: Package created with compilation errors.
Errors for PACKAGE WSGL:
LINE/COL ERROR
62/22 PLS-00201: identifier 'OWA.VC_ARR' must be declared
62/22 PL/SQL: Declaration ignored
63/22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be declared
63/22 PL/SQL: Declaration ignored
Package body wsgjsl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGJSL:
LINE/COL ERROR
280/7 PL/SQL: Statement ignored
311/53 PLS-00905: object OWNER.WSGL is invalid
334/7 PL/SQL: Statement ignored
344/17 PLS-00905: object OWNER.WSGL is invalid
472/7 PL/SQL: Statement ignored
493/31 PLS-00905: object OWNER.WSGL is invalid
813/10 PL/SQL: Statement ignored
813/22 PLS-00905: object OWNER.WSGL is invalid
828/10 PL/SQL: Statement ignored
828/22 PLS-00905: object OWNER.WSGL is invalid
843/10 PL/SQL: Statement ignored
843/22 PLS-00905: object OWNER.WSGL is invalid
852/10 PL/SQL: Statement ignored
852/22 PLS-00905: object OWNER.WSGL is invalid
861/10 PL/SQL: Statement ignored
861/22 PLS-00905: object OWNER.WSGL is invalid
884/10 PL/SQL: Statement ignored
884/22 PLS-00905: object OWNER.WSGL is invalid
960/3 PL/SQL: Statement ignored
960/15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be declared
Package body wsgl...
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGL:
LINE/COL ERROR
0/0 PL/SQL: Compilation unit analysis terminated
1/14 PLS-00905: object OWNER.WSGL is invalid
1/14 PLS-00304: cannot compile body of 'WSGL' without its
specification
Package body wsgfl...
No errors.
No errors.
No errors.
No errors.
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT1:
LINE/COL ERROR
49/4 PLS-00201: identifier 'HTP.P' must be declared
49/4 PL/SQL: Statement ignored
51/7 PLS-00201: identifier 'HTP.P' must be declared
51/7 PL/SQL: Statement ignored
53/10 PLS-00201: identifier 'HTP.P' must be declared
53/10 PL/SQL: Statement ignored
60/4 PLS-00201: identifier 'HTP.P' must be declared
60/4 PL/SQL: Statement ignored
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WSGMC_OUTPUT2:
LINE/COL ERROR
36/13 PLS-00201: identifier 'HTP.P' must be declared
36/13 PL/SQL: Statement ignored
42/10 PLS-00201: identifier 'HTP.P' must be declared
42/10 PL/SQL: Statement ignored
48/13 PLS-00201: identifier 'HTP.P' must be declared
48/13 PL/SQL: Statement ignored
53/16 PLS-00201: identifier 'HTP.P' must be declared
53/16 PL/SQL: Statement ignored
59/13 PLS-00201: identifier 'HTP.P' must be declared
59/13 PL/SQL: Statement ignored
64/10 PLS-00201: identifier 'HTP.P' must be declared
64/10 PL/SQL: Statement ignored
70/13 PLS-00201: identifier 'HTP.P' must be declared
70/13 PL/SQL: Statement ignored
87/28 PLS-00201: identifier 'HTP.BR' must be declared
87/28 PL/SQL: Statement ignored
92/25 PLS-00201: identifier 'HTP.P' must be declared
92/25 PL/SQL: Statement ignored
99/13 PLS-00201: identifier 'HTP.P' must be declared
99/13 PL/SQL: Statement ignored
The following synonyms already exist. Please check that they are valid:
OWA
OWA_UTIL
OWA_COOKIE
OWA_IMAGE
OWA_INIT
OWA_OPT_LOCK
OWA_PATTERN
OWA_SEC
OWA_TEXT
HTP
HTF
CG$ERRORS
WSGL
WSGJSL
WSGLM
WSGFL
Webserver Generator Compilation Report
NAME TY LINE COL TEXT
WSGJSL PB 311 53 PLS-00905: object OWNER.WSGL is invalid
280 7 PL/SQL: Statement ignored
344 17 PLS-00905: object OWNER.WSGL is invalid
334 7 PL/SQL: Statement ignored
493 31 PLS-00905: object OWNER.WSGL is invalid
472 7 PL/SQL: Statement ignored
813 22 PLS-00905: object OWNER.WSGL is invalid
813 10 PL/SQL: Statement ignored
828 22 PLS-00905: object OWNER.WSGL is invalid
828 10 PL/SQL: Statement ignored
843 22 PLS-00905: object OWNER.WSGL is invalid
843 10 PL/SQL: Statement ignored
852 22 PLS-00905: object OWNER.WSGL is invalid
852 10 PL/SQL: Statement ignored
861 22 PLS-00905: object OWNER.WSGL is invalid
861 10 PL/SQL: Statement ignored
884 22 PLS-00905: object OWNER.WSGL is invalid
884 10 PL/SQL: Statement ignored
960 15 PLS-00201: identifier 'HTF.ESCAPE_SC' must be
declared
NAME TY LINE COL TEXT
WSGJSL PB 960 3 PL/SQL: Statement ignored
WSGL PA 62 22 PLS-00201: identifier 'OWA.VC_ARR' must be
CK declared
AG
E
62 22 PL/SQL: Declaration ignored
63 22 PLS-00201: identifier 'OWA_TEXT.VC_ARR' must be
declared
63 22 PL/SQL: Declaration ignored
PB 1 14 PLS-00905: object OWNER.WSGL is invalid
1 14 PLS-00304: cannot compile body of 'WSGL' without
its specification
0 0 PL/SQL: Compilation unit analysis terminated
null

How to install Web Dynpro ABAP on Longhorn Beta 3

Hello, want to give some hints how to install WDA SP12 on Longhorn Beta 3:
- Computer name maximum 8 chars
- set a pw for administrator, not empty (don't know whether necessary)
- rename image\NTPATCH subdir before starting install, otherwise install crashes
- at end of installation mmc msi is not found, start manually from \sap\nsp\_installTemp
- starting sapmmc, converts to Longhorn mmc version, store it, start only new version (old version crashed after some minutes)
- at end of installation, manually start r3dllcon.exe from former ntpatch dir, make it WinXP conform before. ntpatch must be a local dir to make it conform. I disabled uac before, but don't know whether it's necessary (msconfig, right register, uac disable). r3dllcon copy some C dll files into windows\system32, so uac should be disabled
- set hostname in hosts file
- network disable tcpv6
- add sapmsNSP 3600/tcp, sapdp 3200/tcp and sapgw 3300/tcp in services
- add dbms/type=sdb in file ...\profile\default.pfl (don't know if this was necessary)
- start in new sap mmc
This information is an appreciation to your great forums in sdn!
Best regards
Joerg

Hi,
You can maintain the clinet side data in session.
Code to maintain the client side data in session
String test1 = wdContext.currentContextElement().getTest1();
String test2 = wdContext.currentContextElement().getTest2();
IMaintainScope maintainer = Utils.getScopeMaintainer(WDScopeType.CLIENTSESSION_SCOPE);
maintainer.getScope().put("Test1", test1);
maintainer.getScope().put("Test2", test2);
//Retrieving the data from session
if(maintainer.getScope().get("Test1") != null)
String test1= maintainer.getScope().get("Test1").toString();
if(maintainer.getScope().get("Test2") != null)
String test2= maintainer.getScope().get("Test2").toString();
Hoe this helps you...
Regards,
Saleem

How to install Web Auth. Bundle on WLC 2504

Hi,
I need to install a Web Auth bundle and when I download the file from cisco's webpage, its a .zip, but the WLC asks for a .tar file, so I converted it to a .tar and tried again but then it said file was too big.
Can someone please instruct me on how to do it?
Thanks in advance,
Javier

Hi,
the .tar file size (no more than 1Mb
the filename length of the files (should be no more than 30 characters)
Plus other guide lines while downloading at the below location
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70users.html#wp1049431
Regards
Dhiresh
**Please rate helpful posts**

How to install web cam in my man mini?

Hi,
I have added usb external its type it has 4pins and I added an ordinary usb webcam, how can i used this in my yahoo messenger? If I'll start my web cam in ym it says no camara connected.
Any help pls?
Thanks.
Arnel

AndyO
You are absolutely correct - iSights are expensive (here in the UK they are about £100) Using a camcorder is a good solution for occassional use except that they have the annoying habit of powering down at unexpected times when they are not actually recording. On the plus side they tend to have better lenses than even the iSight so work better in low light level indoors. There are also reports of regular use damaging the recording heads through spinning on a tape that is not moving. Not all camcorders now have firewire - a large number seem to only have USB.
There are some USB webcams that claim to work with Macs - not many - my understanding though is that they don't work with iChat only with Yahoo. This might also be the case with the drivers available at the site in my previous post.
At the end of the day individuals have to decide how much use they will make of a webcam and on which system then look at what is available or what they already have. The important thing is to do some homework before spending any money and check that new hardware will work with a mac and for what purposes.
While I agree that the iSight is seriously overpriced it is the best solution if starting from scratch as they are well designed, work flawlessly with a Mac and there are quite a few other applications that can use it too - iStopMotion, Delicious Library etc.
Me - in this case I'd keep checking out the drivers before spending anymore money.

Install Web Part Using Set up file for Sharepoint 2013

HI,
How to install web part to sharepoint 2013 using a setup wizard.
Suppose i have webpart for some data manipulation process so i need to make a set up for install this web part in any sharepoint system is it possible , programmatically install web part is possible any one have code regarding this or can you suggest me how
to do this ?
Thanks & Regards
SUJIL KUMAR t
Software developer

Hi Sujilkumar,
According to your description, my understanding is that you want to install web part wsp using install wizard.
In SharePoint, there is no set up wizard to install the web part. If you want to install your custom web part, you can use PowerShell Commands. Before you can deploy a solution package, you need to add it to the solution database of a SharePoint
Server farm like below：
add-spsolution c:\yourwsp.wsp
Then you can install the solution like below：
Install-SPSolution -Identity <SolutionName> -WebApplication <URLname>
Here are some detailed articles for your reference:
how to add a wsp webpart
Deploy solution packages
Best Regards
Zhengyu Guo
TechNet Community Support

How to install Apache Web Server with PHP on Sun Solaris Sparc machine

Hi,
We are trying to install the Apache Web Server and the PHP package on a Sun Solaris Sparc machine running on SunOS 5.8. We are having compilation problems with the source code of both these packages.
Does anybody know if there are ready solaris packages for Apache and PHP available from where we can download and install instead of source code compilation?
Or any instructions / things to watch for when installing Apache with PHP (if anybody has tried installing Apache with PHP on Sun Solaris earlier) is most welcome.
Thanks,
Harish

Apache should be bundled along with Solaris check in "/var/apache" in Solaris 8 and Solaris 9
php is available at www.php.net
I found an old document for installing PHP maybe this will help.
Cheers
-Dhruva
+++++++++++++++++++++++++++++++++++++++++++++++++++++++Installing PHP 3.x for Apache 1.x.x on Solaris
Introduction
This document describes how to install PHP for Apache on Solaris.
You should have Apache installed before trying to install PHP.
If you want to use PHP with MySQL then you must install MySQL first.
Before we Begin
1. These instructions assume that you have Apache installed according to instructions.
Getting PHP
1. You must be logged in as root to perform this installation.
su root
2. I save all my downloads in:
/usr/local/dist
If you don't already have one, you may need to create that directory now:
mkdir /usr/local/dist
3. You can get PHP 3.0.14 from here(www.php.net).
cd /usr/local/dist
ftp ftp.php.net
cd pub/distributions
bin
get php-3.0.14.tar.gz
bye
Installing PHP
1. We will install PHP in /usr/local/build, but use a tricky tar command
to do it in on hit from the download directory:
cd /usr/local/dist
tar xvfz php-3.0.12.tar.gz -C ../build
Compiling PHP
1. First let's get where the action is:
cd /usr/local/build/php-3.0.14
2. You now have 3 options:
* Simple PHP install without MySQL - goto step 3
* Simple PHP install with MySQL - goto step 4
* Custom PHP install - goto step 5
3. Simple PHP install without MySQL. Next, jump to step 6.
./configure --with-apache=../apache_1.3.12
4. Simple PHP install with MySQL. MySQL must be installed before you can configure PHP to use it. I recommend that MySQL should always be reachable with /usr/local/mysql. Even if you install it else where you
should create a symbolic link from /usr/local/mysql. Otherwise the compiler can have problems finding the mysqlclient library. The command
should look like this:
./configure with-mysql=/usr/local/mysql with-apache=../apache_1.3.12
Next, jump to step 6.
5. Custom PHP install. Take a look at the available configuration directives by using this command:
./configure --help
6. Now we can make the PHP executable. This may take a while.
make
7. Now we install the PHP module with:
make install
Adding the PHP Module to Apache
1. Now we have to setup Apache to include the PHP module:
cd ../apache_1.3.12
2. Re-configure Apache to use the PHP module. You should use your previous Apache configure command along with the PHP activate module directive.
You can see your previous Apache configure command by doing:
cat config.status
You can configure Apache using the previous command with the added PHP module by doing:
./config.status --activate-module=src/modules/php3/libphp3.a
If you used the simple Apache install from instructions the command will look like this:
./configure prefix=/usr/local/apache activate-module=src/modules/php3/libphp3.a
3. Make and install Apache with PHP enabled:
make
4. We need to stop the server before installing the files:
/usr/local/apache/bin/apachectl stop
5. Now we can install the new binaries:
make install
6. Start apache again (now running the new php enabled version):
/usr/local/apache/bin/apachectl start
Setting Up PHP
1. We have to tell Apache to pass certain file extensions to PHP. We do this in Apache's httpd.conf file.
cd /usr/local/apache/conf
2. Edit the httpd.conf file. If you do a search for php you will find a couple of commented out lines telling Apache to use the PHP module. You should uncomment them to look like this.
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
3. I prefer to use the extension .phtml, you can use whatever extension you like (even .html) by adding lines to httpd.conf like this:
AddType application/x-httpd-php3 .phtml
Check that it Works
1. We have to restart Apache to make these changes take effect on the running server.
cd /usr/local/apache/bin
./apachectl restart
2. Apache should now be running with PHP enabled. The server version should include PHP/3.0b2.
./apachectl status
Apache Server Status for dev.synop.com
Server Version: Apache/1.3.9 (Unix) PHP/3.0.12
Server Built: Oct 25 1999 00:37:07
3. Now it is time to test PHP with a page. The simplest thing to do is create a page called test.php3. My file is here. This file contains the
following text:
<?php phpinfo(); ?>
4. Point your browser at this file on the virtual host which you used:
http://localhost/test.php3

How to install a war file as a Web Application Bundle (WAB) in CQ 5.5?

How to install a war file as a Web Application Bundle (WAB) using CQSE and embedded OSGi Felix container? OSGi R4.2 specification specified Web application bundles which allows deploying war files as WABs insie OSGi containers. How do we do this in Felix container embedded in CQ 5.5?

i m sorry, i intentionally wanted to post it in EJB forum, mistakenly i posted it in Servlets forum, anyways, if anyone of u know the ans, plz share it with me too.
Thanx
Nisha

How Can I install Web Service on Oracle 11g r1?

How Can I install Web Service on Oracle 11g r1?

Hi,
Is necesary install XDB?
Because i have executed;
select * from dba_registry
where COMP_ID = 'XDB'
Oracle XML Database
Regards

How to view the session in the web container

hi, Folks,
is there any way to view the sessions in J2EE web container? I need to know how many living session currently in the web container.
Thanks

You did not indicate the Web Server version that you are using for web container. Assuming its Sun Java System Web Server 6.1, per Servlet 2.3 specification, you should be able to use of session creation and destruction events. This can be done using HttpSessionListener to count active sessions. Here's the docs for reference:
http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/http/HttpSessionListener.html
Thanks
Manish

How to install Discoverer 11g on Web Logic Server with Forms and Reports 11g Rel2

Hello,
We finally started to migrate from Oracle iAs 10g Release 2 to Oracle Forms and Reports 11g Release 2 using Web Logic. I don't see an option to install Discoverer on the server.
My OS: windows 2008 R2
Installed Web Logic 10.3.6
Forms & Reports: 11.1.2.2.0_64 (64 Bit Forms)
How do I install Discoverer Plus in 11g? All I can find is Discoverer 11g Desktop/Administrator to run on User work Station. We were using discoverer Plus in 10g iAS.
Thanks
Rao

907485 wrote:
Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
Thankyou.we only know what you post.
where does linux reside?
where is VNC installed?

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

How to install web container?

Similar Messages

Maybe you are looking for