How to install Win 7 on Mac using USB flash drive....???

clintonfrombirmingham wrote:
I thought that installation through Boot Camp required, without hacks, a physical optical disc to install Boot Camp? I don't use it any longer since I run XP under Parallels, but I would swear that you have to use a disc, and not a USB thumb drive, to install Windows?
Maybe some real Boot Campers will visit this thread...
Clinton
If you have the Media you can use it to create a bootable USB key via boot camp assistant.
It will create the usb and has the option of pre-downlading the drivers and bootcamp utilities for windows.
It is pretty much all automated and quite simple.

Similar Messages

How to install windows 7 in bootcamp from flash drive os x 10.9.1

How to install windows 7 in bootcamp from flash drive os x 10.9.1

oooHideooo wrote:
It DOESN'T WORK!!
I tried tonnes of method already, and the apple guide method absolutely doesn't work for MacBook Air, 10.9.1
Did you even tried it yourself????!! with Maverick 10.9.1 you will NOT be able to get pass the bootcamp first page:"install window 7". It will give an error msg saying "The installer disc could not be found"
My usb confirmed bootable! I created it with bootcamp, and tested it on a different macbook and it works. But doesn't work on MacBook Air. (Even startup disk doesn't detect it as bootable in Air)
anyone else has a real solution to this problem?
Thousands have successfully tried it themselves and installed Windows on a Macbook Air. Perhaps if you provided some details about what you did and what errors you observed we could help you. The Boot Camp instaructions, if followed, will produce a successful install.

Trying to install win7 over bootcamp with usb flash drive is not accepted

trying to install win7 over bootcamp with usb flash drive, the partition is not accepted under windows although its formatted ntfs, there is shown a faillure which could be read in the logs of win install but i don't find them. Tried at least five times to reinstall / reformat

You'll probably have better responses over in the Boot Camp forum....here's a link for you:
https://discussions.apple.com/community/windows_software/boot_camp

How do you save PDF to a USB flash drive from iPad 2

How do you save PDF to a USB flash drive from iPad 2

You can't, the camera kit connection kit which has a USB connection only supports the copying of photos and videos to the Photos app, and doesn't support the copying of any content off the iPad - you will either need to go via your computer.

How to install (using usb flash drive) os x snow leopard on 10.5?

i have a version 10.5 (leopard), but i would like to install snow leopard (10.6). i tried using bootable usb flash drive using the "utility drive". However, it did not quite work as i expected. Does anyone know how to use bootable usb flash drive to install snow leopard on leopard?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Leopard installer DVD. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Insert the USB flash drive.
Restart the computer.
Immediately after the chime press and hold down the "OPTION" key.
Release the key when the boot manager screen appears.
Select the icon of the USB flash drive and click on the arrow button below the icon.
When the installer finishes loading follow the onscreen instructions.

How do install Windows 7 from a USB optical drive?

I have a 27" 2013 iMac with no optical drive so I borrowed an Apple USB portable optical drive. How do I install Windows on BootCamp from the USB Optical drive?

iirc, you won't be able to or at least you shouldn't, it will take much longer than using a usb install
CHECKLIST
use only a +8gb USB2 flash drive
disconnect ALL devices except kb, mouse
STEPS
do a PRAM reset
open disk utility, confirm you have 1 partition (‘mac HD’ unless you renamed it) and repair permissions TWICE
dl a windows ISO
insert your usb flash drive and open boot camp assistant, choose all options making sure you used the new ISO just dl'd
if you get an error that the windows support software is unavailable, manually dl it here, put it on a separate USB2 drive and install by clicking setup.exe after windows is installed
http://support.apple.com/kb/ht5634
w7 ISOs
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/

How to create bootable iso file from usb flash drive to install windows 7 on macbook early 2008

how to create bootable usb flash drive from iso file to install windows 7 on macbook early 2008

I would like to install windows on my mac because I am in engineering school and there a lot of programs I'd like to have on my computer that only run on windows. And yes I'd like to use bootcamp and I know there must be a way to install off a flash drive. Do you know of a way?

Install windows server 2008 64bit on a poweredge sc430 using usb flash drive

Good day Sir!
I Have 2 poweredge sc430 server with windows server 2003 64bit OS... I want to upgrade it to windows server 2008 standard edition R2 64bit.. I first disable the internal cdrom from bios and installed win2k8 64bit on 1 sc430 using external dvdrom. But when i used a usb flash drive to install win2k8 to another sc430, the server and keyboard hangs. ive already configured the boot sequence(usb drive as 1st priority). ive tried my usb flash to a non dell pc to make sure if my usb boots well and it worked... i think that there must be something i missed in configuring the bios of sc430
Thanks in advance!

donpham
Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks!
That's not how it works.

How to use usb flash drive

So i tried to use a usb flash drive to save a word document on my macbook, but i couldnt find the flash drive, or even where to find the usb port. can somebody tell me how to use a usb flash drive on macbooks?

The USB ports are on the left side.
Just plug in the drive, and it should show up on your desktop (or in the Finder - click the happy face icon in your dock). Drag and drop the files into the drive. Or, select the drive as the save location when you pick Save or Save As in Word.
When you're done, drag the drive's icon to the trash (it will change to an eject symbol), or click the little eject symbol next to it's icon in the Finder. You can then safely unplug the drive.

How to use USB flash drive in XFCE?

Hello,
How to mount/unmount USB flash drive in XFCE?
Thanks for your help,
Anand

http://wiki.archlinux.org/index.php/AutoFS_HowTo might be interesting

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

Using USB flash drive to connect laptop

On previous versions of Network Magic, when adding a laptop to my wireless network, an option would appear for using a USB flash drive to transfer settings and/or password to the new machine.
After a few "upgrades" to NM, the option ONLY appears after I turn my security off. If I leave my WEP security ON, the only option that appears is to "copy" the 32-digit password & enter it on the laptop. However, I keep getting errors.
Is there a procedure to use a USB flash drive to connect a "new" laptop to my secured wireless network?
Thank you.

thomas.adkins wrote:
On previous versions of Network Magic, when adding a laptop to my wireless network, an option would appear for using a USB flash drive to transfer settings and/or password to the new machine.
After a few "upgrades" to NM, the option ONLY appears after I turn my security off. If I leave my WEP security ON, the only option that appears is to "copy" the 32-digit password & enter it on the laptop. However, I keep getting errors.
Is there a procedure to use a USB flash drive to connect a "new" laptop to my secured wireless network?
Thank you.
Hi thomas,
If this is your own New Laptop to your Network, and even after you supplied the password, the problem is the Network Lock is still on. You need to disable the Network Lock. Enter the password, installed Network Magic if the Laptop is your own. You need to stop tracking your Laptop as an intruder on your other copies of Network Magic.
Then you need to reenable the Network Lock from your Wired Computer. Use your other computer to activated the copy of Network Magic installed on the laptop.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

How To Transfer music files from a usb flash drive onto my thrive

I have some music taken from my pc onto a usb flash drive. I can play it on the thrive but want to permanently transfer it onto the thrive so I can play it without using the usb flash drive.
Cananyone help me?
Thanks

One way that I did it was to download a movie onto my laptop. Once I did that, I copied it onto an SD card. Inserted the card into my Thrive and dowloaded it from there. Or as others have mentioned, keep the movie on the SD card so that you'll have more memory on your Thrive. I went on YouTube to see how to copy from the SD to the Thrive. It's pretty easy.

Hi how do i save files to a usb flash drive in windows 8 rt

Hi how do i save a pdf file to a usb drive i have a tablet with windows 8 RT myfiles are in Adobe

Adobe Reader Touch does not support Save or Save As yet. But we are working on adding the support in a future release.
How did you get PDF files "in Adobe"?
If you already have the PDF files on your device, you can simply use Microsoft File Explorer on the Windows 8 desktop to copy them to your USB flash drive.
If you tap/click on the link to a PDF file in Microsoft Internet Explorer (Windows Store app, i.e. Metro version), IE will prompt you to "Open" or "Save". After you choose the Save option, you can specify your USB flash drive as destination.

How to save your photos to a usb flash drive

Hi, I was wondering how I can remove my Photos using a usb flash drive. I know I can save them in the Cloud and prefer not too. Would appreciate any help. Thanks

You're going to need a computer to do this, no direct way. For instance you could send them to Dropbox, then from there use a computer to download the files from Dropbox to a flash. Or use a WiFi transfer App on the iPad to send the photos to a computer than has the desktop version of the App, and then copy to flash drive.

How to install Win 7 on Mac using USB flash drive....???

Similar Messages

Maybe you are looking for