How to install Windows 7 64 bit driver for Canon i9100 Printer?

When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver.  Visiting the Canon website, I find an update module for the Windows driver.  Canon says the printer MUST be installed using Windows Updater before their driver update can be installed.  I have tried everything, but I cannot get Windows to find a driver.  Windows Updater says that my computer is Up To Date.
What am I doing wrong?
Thank you,
David

Hi Honeycutt,
The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update.  Please try Microsoft's web page for assistance with troubleshooting this:
http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Can't install win7 scanner driver for canon pixma mp260, help please !!!

    can't install win7 scanner driver for canon pixma mp260, help please !!!

    HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

  • How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1?

    How can I download a driver for a Brother printer DCP-J411ODW for Mac OSX 10.9.1? I go to the right place on the Brother website and instead of downloading a driver it says there is a problem. Also something I did download and stuff on the CD provided with the printer is for a PC not a MAc. Help please.

    OK, connecting a Wi-Fi printer is a 2 step process.
    Connect printer to your network
    Have computer to "see" printer on the network.
    Follow Apple's steps for connecting a Wi-Fi printer in Printing in OS X. Read the article in it's entirety before installing.

  • HOW DO I GET A DRIVER FOR MY KODAK PRINTER ESP 3.2 FOR IMAC

    I AM SETING UP MY NEW IMAC, HOW DO I GET A DRIVER FOR MY KODAK PRINTER ESP 3.2

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite").
    I have not tested the hack myself. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the printing system. It's up to you to decide whether that risk is worth taking.

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Windows 7 driver for 3500 color printer

    I need a windows 7 driver for my 3500 color laserjet printer.  Windows XP is the latest driver listed on the website.

    The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
    EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot. 
    Message Edited by DexterM on 07/10/2009 10:57 AM
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.
    Attachments:
    Capture.JPG ‏57 KB

  • Windows 7 64-bit driver for Canon Digital Rebel XT

    How do I interface my Canon Digital Rebel XT with a computer running Windows 7 64-bit?

    You are correct.  Canon does not provide a driver for Windows 7 64-bit.  You have to change the communication mode in your camera and then use Windows Photo Gallery or other software to transfer the photos.  Here is the response that I received from Canon tech support (it works):
    "To connect your camera to a Windows Vista or Windows 7 computer, you'll need to change the communication mode.
    To set your camera up for this, please do the following:
    With the camera disconnected from the computer, turn the camera on.  Press the "Menu" button.  Now select the [Wrench, Hammer, 2] tab.  Scroll down to "Communication" and press the "Set" button.
    Select the [Print/PTP] and press "Set".  This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT Instruction Manual.
    Now connect your camera to your computer and turn the camera on.  Your computer should now recognize and have access to your Digital Rebel XT.
    Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
    You may download your pictures using Windows Photo Gallery, or you may use a card reader to download images.  If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com."

  • How to install 32-bit driver as Additional Driver on Win 7 x64

    I have an x64 Win 7 machine with an HP4315 attached via USB. I have a few XP machines that need to access the printer on the X64 machine.
    When I "Add printer" and reference the share name on the x64 machine, it attempts to download a driver, which fails giving me an "access denied" error.  This happens even when I had installed the drivers onto the x32 machine as if the printer were locally attached.
    Ive seen a workaround that may solve the immediate problem here http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Unable-to-install-XP-drivers-for-Deskje...
    I will try this, but its not the right long term solution as these XP machines will be replaced by Win 7 x32 machines and I may not be around to laboriously apply the workaround again.
    Windows 7 x64 provides for this.  I right click the printer on the x64 machine, then  "printer properties" (not "properties"), Sharing and I then get the option to install an x86 driver solely for downloading to x32(x86) machines which want to access the printer. It asks for the location of a folder containing the .inf file for this printer.
    Great!  But where on earth do I find a folder that contains the 32-bit .inf file associated with the HP4315 printer? 
    I've downloaded the setup file from HP and executed it on the x32 machine running XP, thinking I'd copy the relevant files  and offer them to the x64 machine. But where are the files? What is the .inf file called? Are there any other files needed? 
    Ive seen a lot of people struggling with this and no solutions other than the workaround mentioned above.  It would be great if a "proper" method could be described.

    Hello colinobj,
    I have looked at the link that you have provided that gives the steps to resolve the installation issue. 
    Just so you are aware, this is the solution to the issue at hand.  Seeing that XP is on its way of being not supported, this is the best solution that Bob_Headrick has provided.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How to install W7 Promise driver for K9A2 Platinum

    First of all i assume no responsability for any loss of data ,everything described here is done on your own risk.BACK-UP data before doing this.
    Any K9A2 Platinum v1 user was disapointed when looking on the product page seeing no W7 driver.As a MSI tech recommended a driver from Promise i said to myself to try it and of course , it did not installed the normal way.You could force it tru HAve Disk from within Windows 7 only when running form the SB 600 .Also Windows updates installs an update for the cip.
    The procedure is simple ,practically you only need to edit one or 2 INF files depending on the W7 version.
    FTTX4650-2650 controllers are both compatible with Windows 7 as the Microsoft website shows.
    Download driver from Promise website the driver for FTTX4650-2650 Win7 Win2008R2 WHQL V 1.3.0.4 -> file name FTTX4650-2650_Win7_Win2008R2_WHQL_V_1.3.0.4
    Unzip the archive and navigate to the i386 or/and amd64 folders locate <FTT3s.inf> file/s ,open with Notepad.For the .inf extension to be visible go to File & Folder Options and enable extensions to be visible.
    Under the [Promise] section add the folowing lines ,this ID s were harvested from within Windows 7 Promise properties ,when no driver was installed
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    After the copy/paste that [Promise] section will look like this
    [Promise]
    %SATA_TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F29105A
    %SATA_TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2A105A
    %SATA_TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2B105A
    %FastTrak TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F21105A
    %FastTrak TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F22105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3716105A
    %FastTrak TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F24105A
    %FastTrak T2_Desc%=Napa_Inst,PCI\VEN_105A&DEV_377d&SUBSYS_3772105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    %Promise_Raid_ControllerDesc%=NODRV,SCSI\ProcessorPromise_
    If it looks like this save the file.
    Go and Install it.
    A warning message for the driver will appear as with any beta or unsigned driver ,ignore it.
    When in W7 update the Promise as offered by Windows update.
    I will not be held resposable for any damage or data loss.You are doing this on your own risk.Back-up your data and test the driver for yourselves before long term usage.
    If it works for you post feedback.

    Quote from: wlahdone on 21-February-11, 21:51:07
    First of all i assume no responsability for any loss of data ,everything described here is done on your own risk.BACK-UP data before doing this.
    Any K9A2 Platinum v1 user was disapointed when looking on the product page seeing no W7 driver.As a MSI tech recommended a driver from Promise i said to myself to try it and of course , it did not installed the normal way.You could force it tru HAve Disk from within Windows 7 only when running form the SB 600 .Also Windows updates installs an update for the cip.
    The procedure is simple ,practically you only need to edit one or 2 INF files depending on the W7 version.
    FTTX4650-2650 controllers are both compatible with Windows 7 as the Microsoft website shows.
    Download driver from Promise website the driver for FTTX4650-2650 Win7 Win2008R2 WHQL V 1.3.0.4 -> file name FTTX4650-2650_Win7_Win2008R2_WHQL_V_1.3.0.4
    Unzip the archive and navigate to the i386 or/and amd64 folders locate <FTT3s.inf> file/s ,open with Notepad.For the .inf extension to be visible go to File & Folder Options and enable extensions to be visible.
    Under the [Promise] section add the folowing lines ,this ID s were harvested from within Windows 7 Promise properties ,when no driver was installed
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    After the copy/paste that [Promise] section will look like this
    [Promise]
    %SATA_TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F29105A
    %SATA_TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2A105A
    %SATA_TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F19&SUBSYS_3F2B105A
    %FastTrak TX2650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F21105A
    %FastTrak TX4650_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F22105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3716105A
    %FastTrak TX4652_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_3F24105A
    %FastTrak T2_Desc%=Napa_Inst,PCI\VEN_105A&DEV_377d&SUBSYS_3772105A
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462&REV_00
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&SUBSYS_37161462
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_010400
    %FastTrak PDC42819_Desc%=Napa_Inst,PCI\VEN_105A&DEV_3F20&CC_0104
    %Promise_Raid_ControllerDesc%=NODRV,SCSI\ProcessorPromise_
    If it looks like this save the file.
    Go and Install it.
    A warning message for the driver will appear as with any beta or unsigned driver ,ignore it.
    When in W7 update the Promise as offered by Windows update.
    I will not be held resposable for any damage or data loss.You are doing this on your own risk.Back-up your data and test the driver for yourselves before long term usage.
    If it works for you post feedback.
    I made the changes specified above. How do I install the driver ?

  • Installed driver for Canon MP640 printer but when I use comes up with communication error

    Hello
    I have just purchased a new IMac and have had very little to do with Apple before so everything is foreign.  I used the help desk today to download the driver for my printer Canon MP640 which came up as connected with the green light.  When I went to print my first document it is now coming up with an error that ther is a "communication error".  I am not a techno person and don't have a great deal of patience with technology.
    Please helllppp.

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Windows 7 driver for photosmart premium printer

    I have installed windows 7 on my hdx 16 and I need drivers for the photosmart premium printer 309c. Anyone have any luck getting the two to work together?
    Thanks
    Russ
    This question was solved.
    View Solution.

    The latest Vista drivers for this printer on THIS page shows one of the enhancements as supporting Windows 7. So it should install fine. Do notice that this is the v.13 software.
    EDIT: Just downloaded the version 13 software, and tried installing it. It seemed to go through fine, though I don't have the printer physically here. Check the screenshot. 
    Message Edited by DexterM on 07/10/2009 10:57 AM
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.
    Attachments:
    Capture.JPG ‏57 KB

  • Has anyone found the correct driver for Canon MF4018 printer?

    I have tried installing all of the available drivers including MF4010 which other users have reported works- I keep getting Error-50 and cannot print anything. If anyone has used any driver for this printer that is compatible with my macbook pro - that could help me out a lot.

    Since it's a 10.8 issue, why not place a new post in the 10.8 usage forum?
    DALE

  • How do install windows hard drive (from dead pc) into boot camp partition

    My Windows 7 desktop died recently, so I took the opportunity to buy a Mac Mini (latest version as of Feb 2012) as a replacement.  I want to transfer  the Windows 7 installation (from the dead PC) including all applications, accounts, settings, user files, etc to the Boot Camp Partition.   Can someone please provide the steps on how to perform the Win 7 migration to the Mac Mini. 

    Just to clarify:
    I want to install the Windows 7 installation from dead the PC into the Mac Mini's Boot Camp partition.
    I installed the PC's hard drive into an enclosure and connected it to the Mac Mini via the USB port.
    What I want to do is the following:
    1) Do a Windows 7 "fresh" install in the Mac Mini Boot Camp partition.
    2) Migrate all the applications installed on the  Windows 7 PC and their associated data.
    3) Migrate all user accounts and data.
    Is there a tool that can transfer all applications and user accounts from the Windows 7 Hard Drive to the Boot Camp partition on the Mini?
    Based on the documentation the Window Migration tool is Lion OS utility and does not perform a complete migration of all applications installed on the Windows machine.
    thank you.

  • No Driver for Canon MP610 printer

    Hello! I recently updated to Leopard. When I went to print using my Canon Pixma MP610 printer I received a message that “no printer was selected.” I then selected to add my printer but then a follow up request asked to select a driver or printer model. The drop down listed the Canon Pixma MP500 & MP 700 but not the required MP610. What should I do? Please help. Mike

    Hi
    Get your printer software from the Canon website direct and install. I live in the uk so make sure you select your country correctly. For uk drivers and software go-to http://software.canon-europe.com/products/0010488.asp

  • How can I download a driver for a Brother printer HL2270DW for Mac OSX 10.9.1?

    I recently purchased a Brother printer HL2270DW and am running Mac OSX 10.9.1.  The brother website has a download available, but in the process of adding the printer I get the error message that "Can't install the software because it is not currently available from the Software Update server."  Any ideas?

    Just found a solution which involves resetting the printer settings:
    To Reset the Printer Setting:
    1) Open "System Preferences"
    2) Select the "Print & Scan" pane
    3) Right click (or control click) anywhere in the "Printers" window (in the white space below any of your existing printers)
    4) Select "Reset Printing System..."
    That will reset the printing settings, and should happen immediately. You'll know if it worked because any existing printers you had previously set up will disappear from your printers list. Once the system has been reset, click on the "Add printer" button and add the printer that you're trying to add.
    As any other printers you had previously added are deleted you'll have to add them again.
    Hope that helps

Maybe you are looking for