How to install Windows 7 in new laptop

I bought a Pavillion 12-p157d.  I need windows 7 because two of the programs I need to run do not run on Windows 8.
After several futile attempts to overwrite the Windows 8 operating system I bought and installed a new hard drive.  The system still refuses to boot off my CD.  It reports: "Selected boot image did not Authentice.  Press <enter> to continue."
Pressing enter turns off the computer.
Boot disk works fine in this computer, and old Pentium 4 tower.
This question was solved.
View Solution.

Hi,
Try the following.
Shutdown the notebook.
Tap away at the esc key as soon as you press the power button to enter the Start-up Menu and then select the Bios Menu ( f10 ).
Under the System Configuration tab, expand the Boot Options Menu.
You need to set Secure Boot to Disabled and Legacy Devices to Enabled.
When done, press f10 and select to save the changes.
You may then have to enter a 4 digit pin displayed on the screen to confirm the setting changes - enter the code and hit enter.
Insert the Windows 7 installation disc and Shutdown the notebook.
Tap away at the esc key as soon as you press the power button to enter the Start-up Menu and then select the Boot Options Menu ( f9 ).
Use the arrow keys to highlight the CDROM (uefi) option and hit enter - if prompted to 'Press any key to continue....' - do so.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Can't get adobe reader to install on my new laptop with windows 8

    I can't get adobe reader to install onto my new laptop with windows 8. Basically what happens is that I start the download from the adobe screen by clicking the yellow download button, then I click run (I've also tried save and run), then I allow the program to make changes to my hard drive, and then finally a blank grey box appears in the in the middle of the screen, titled "adobe reader installer". After this box appears nothing else happens. I've let it sit for at least 30 minutes and still nothing. I've also disabled my pop up blocker, and set the security settings to default as suggested in other posts. Unfortunately this is the only pdf program that works for the site we have to use to write contracts, so I need to get this figured out asap. Thanks in advance for any help and advice.

    Try installing from http://get.adobe.com/reader/enterprise

  • Re: How to install Windows Xp on pre-Vista laptop Satellite A300?

    Hello
    I'm now facing a problem when i try to install windows xp on my pre- Windows Vista laptop operating system ..
    A300 when i input windows xp disc and boot from cd/dvd .... there is an error tell me that : you have viruses on your hard disc or scan it from viruses , or something like that but i test the same OS disc into other pc and its working also i have Gdata IS 2012, and i think its restriction from toshiba or i dont know , but its very important to install windows xp ...
    i hope you help how to install windows xp on my laptop .
    Regards
    John

    Hello John
    It is not easy to understand the whole situation, especially this part with viruses.
    In my opinion WXP installation should not be problematic.
    What you need is WXP SP2 or SP3 disc and SATA driver. Without SATA driver HDD will not be visible for WXP.
    More about that you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38

  • Trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

    trying to install CS5 on new laptop with Windows 8 pro. Keeps telling me to close Google Chrome when it's already closed.

    Terminate the relevant processes in task manager, including the Google updater service.
    Mylenium

  • How can i authorize my new laptop(windows)?

    How can i authorize my new laptop(windows)?

    If you go into iTunes and navigate to the 'Store' tab it should have the option to 'Authorize this Computer'

  • How to Install Windows 7 Without the Disc

    1a)  Here is very useful article from PCWorld.com. The article is entitled "How to Install Windows 7 Without the Disc" and means just what it says. The article also has links to Magical Jelly Bean Keyfinder and legitimate Windows 7 ISOs from Digital River, a licensed distributor of Microsoft software. The article lists "Step 1" as;
    "Find your Windows 7 product key: Typically this 25-character alphanumeric string is printed on a sticker affixed to your PC or on documentation included with your PC. Alternatively, you can use a keyfinder program such as Magical Jelly Bean Keyfinder to pull your product key from the Registry. You need your product key to reinstall Windows."
    1b)  Using a key finder, however, is only useful if the Windows 7 product key was printed on a sticker (Microsoft Certificate of Authenticity) affixed to your PC, on documentation included with your PC, or sent via email by Microsoft. Assuming your computer came from one of the big brand computer manufacturers... HP, Sony, Dell, Gateway, etc... as most do, it uses a generic "mass activation" OEM SLP key. Trying to use this key by itself isn't going to work. This OEM SLP key needs to be mated with an OEM SLP certificate and an appropriate OEM BIOS with a proper SLIC table.
    1c)  Here is where ABR Beta With Windows 7 Support comes to the rescue. Follow the "How to use it" section of ABR for Windows Vista for information and instructions on how to use ABR. The steps listed for Vista apply to Windows 7 as well. Perform the "activation backup" to "backup" and save the OEM SLP key and OEM SLP certificate. Save the entire ABR folder to an external location for later use. This will allow you to pre-activate your "clean" Windows 7 install on the computer you pulled the key and certificate from.
    1d)  Now install Windows 7 from your new "Windows 7" disc or USB stick, following all prompts as needed. Don't enter a Windows 7 product key if request. Also, don't allow Windows to try to auto-activate. Once Windows is fully installed, run ABR "activation restore" to "restore" the previously backed up product key and certificate to the new Windows 7 install. Verify that Windows is activated, repeat "activation restore" if needed.
    2)  Here is another useful article, this time from SevenForums.com. This arcticle is entitled "Clean Reinstall - Factory OEM Windows 7" and provides detailed steps required to backup your computer, audit current hardware and software, locate software and drivers, install and activate Windows 7, and create a Windows 7 Backup Image of your fresh install.
    Good luck.
    Links to additional Windows 7 SP1 "Editions" and "Languages" can be found HERE and HERE.
    Link to "ei.cfg Removal Utility". The "ei.cfg Removal Utility" is a simple tool that will remove the ei.cfg  from any Windows ISO disc image, thereby converting the image into a "universal disc" that will prompt the user to select an edition during setup instead of being forced to use different discs for different versions of Windows 7.
    Direct link to Windows 7 USB/DVD Download tool.
    <Cross posted to Notebook Operating Systems and Software for Notebook, Laptop, and Netbook users>
    EDITED by Frank on 8/28/2013
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

    ervis,
    Before formatting the hard drive you should have been able to use the HP Recovery Manager to create your recovery discs or perform a system recovery. This is provided the recovery partition wasn't already corrupt or damaged. If the "D:" HP Recovery partition is missing or damaged and you don't have a set of HP Recovery Discs, you will need to use the information in my previous post to get your computer up and running again.
    The information in the document referred you to applies to several different "types" of installations;
    Using ABRbeta is only needed if you have an active OEM factory SLP (system locked preactivated) installation of Windows. You use ABR to pull the factory key and certificate off the computer, to reuse it on the same computer with a clean Windows install.
    If you are just installing Windows and are going to use the Windows 7 product key on the COA on the side of your computer, all you need to do is download the same version of Windows that your key is for and burn the ISO. Now install Windows answering or following all prompts as needed (except do not enter the Windows product at this time... it will be entered later). Once Windows has completely installed, enter the key and activate it. Your Windows 7 OA key should work on a SP1 install without issue.
    The only thing I see that could mess things up, is the language of the install. If you are still having trouble activating Windows, please reference the ISO you download and a post a photo of your Windows COA
    with the key erased or Xed out.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How do you test your new laptops?

    To the gurus or people who have researched this question:  How do you test your new laptops?
    When you get a new laptop, what do you do to test it?
    My X1Carbon might arrive in a couple weeks, and reading about all the failures and DOAs is scary. So assuming mine is not simply DOA, how do you shake out the less obvious or more obscure problems?
    I did search for this info before posting. One other person asked the question, 
    >> Would appreciate advice re optimal set-up and what testing/diagnostics to do to determine if ther...
    but no one answered.

    With testing I start with the basics and work my way to the harder stuff.
    Inspect the external condition of the machine.
    Boot and enter the BIOS before Windows. Review settings then power off.
    Boot from Acronis True Image Home backup/recovery DVD and clone HDD or SSD and thus the factory image before it's ever booted to Windows.
    Boot to Windows and look carefully at the Lenovo factory image and try to get an understanding for the Lenovo software and why it is there.  This does not include the other software from Microsoft, Google, etc.
    Create Lenovo Factory Image DVD set with Rescue and Recovery.  Throw disk set in the box or put on the shelf in case the machine is ever re-sold.
    Test all of the ports - I test every port on the machine for my expected usage.  For instance, in the case of the X1 Carbon I would confirm the mini DisplayPort connection works correctly with an external LCD panel.  If the machine had a IEEE firewire port or something, test that.  Test the USB 3.0 ports with a known working external external enclosure and verify transfer speeds.
    Test the SSD speed with CrystalDiskMark, ATTO and AS Disk Benchmark software to get a good overview of the performance.
    Install HWiNFO and look carefully at the components.  Observe turbo boosting, thermals and fan RPM over the course of a few days for battery and AC power.
    Do at least one full battery discharge and recharge.  Observe the cycle and details are being properly displayed and recorded in Lenovo Power Manager.
    Download all software and drivers from support.lenovo.com for the model being tested.  Confirm visually you have all the core components needed.  Core includes the drivers, power management driver, Power Manager, hotkeys, etc.
    Flatten the machine and install Windows or Linux from scratch.  Install drivers and software.
    Re-test ports and confirm the machine is working properly.
    Benchmark the SSD again.  Confirm no change.
    Install HWiNFO and confirm turbo, thermals and fan speeds are still proper.
    Install core applications and test them.  There may be core features in Windows that also need to be installed and tested.  For instance, Windows 8 Hyper-V for virtualization. 
    Connect any external devices you expect to use and test them.  For instance, video cameras, smartphones, mp3 players, digital cameras, printers, USB docks, etc.
    Do several battery tests with your typical applications and behavior.  The goal here is to simulate how the machine will be used in your day-to-day setting or travel scenarios.  I usually do at least three tests.  This can be rather time consuming with long battery life machines so I get a lot of other testing out of the way first.
    By the time you get to this point, if you haven't hit any major roadblocks you'll start to have a good feel for the machine, and if it is going to be a keeper or not.  The assumption here is that during this timeframe you have been observing the screen, keyboard, and trackpad performance to see if it's to your liking.  The other assumption is that you are using the machine and applications in the scenarios you are purchasing it for.
    I don't run synthetic benchmarks.  I prefer to test a machine against the scenarios I expect to use it with.  I spend most of the first week making this assessment.  If any major hardware defects are present, the machine is automatically returned.  I do not repair machines just received.  No exceptions.
    Week 2 is for ironing out any minor issues and assessing if the machine meets the requirements for the scenarios it will support.  If it does, it is kept.  If it does not, it is returned.  This week includes subjective and objective input.  You have to weigh the pros and cons for a machine against your priorities. It is rare that a machine is perfect so you have to decide the ROI for the machine.  Service and Support must be considered so week two might include a call to support for any unresolved issues.  Don't discount the service you receive during this period.
    After week two, you are likely right on top of the last day to return a Lenovo machine.  The return period is 21 days from the invoice date (I believe), not the day the machine is received so make sure you are well aware of it.  After 21 days, the machine is yours for good unless you sell it.  Decision time.
    Good luck.

  • Install Windows to new Hard drive from USB system backup

    I have bought a new 1TB hard drive for my G580 and have created a USB system recovery drive using Windows 8.1's system restore functionality but when I swap the drives out and try to reset the PC to factory setting settings it fails by saying a partition can't be found.  I've formatted partitioned and formatted the new drive but to no avail.
    Any ideas?
    Solved!
    Go to Solution.

    I have a Lenovo G580 laptop with UEFI firmware (BIOS) embedded Windows 8 product key. These instructions will work in my computer.
    How to install Windows 8/8.1 to a blank hard disk from the Windows 8/8.1 recovery USB flash drive?
    http://www.eightforums.com/installation-setup/4402​1-need-help-reinstalling-windonws-8-usb-2.html#pos​...
    -or-
    How to clean install Windows 8.1 if you have an OEM computer with UEFI firmware (BIOS) embedded Windows 8/8.1 product key?
    http://www.eightforums.com/installation-setup/3848​6-need-help-formatted-genuine-windows-8-lenovo.htm​...

  • Cant install windows on new ssd

    Hi, Im new in this forum, so sorry for my bad english
    I have a problem which is killing me... today I bought new Transcend SSD370 256GB hard drive. I write windows 8 to bootable usb drive. When I launched setup, choosed custom installation, then it shows just one drive with unallocated space almost 256gb, when I try to push button next for instalation I get error "we couldnt install windows in the location you choose. please check your media drive. 0x80300024 ." then I tried to creat new partition but got error " we couldnt create partition". I tried google fix for this, I tried use cmd and diskpart comands to do clean on disk 0 , but got error " diskpart has encoutered an error: the request could not be performed because of an i/o device error". intresting thing that I put this SSD to other laptop (asus) and after 5minutes windows was fresh installed... and then when I put SSD with windows that was installed on other laptop I got error that disk is unreadable or some disk error and suggestion to do ctrl alt del for reboot... both laptops ar on ACHI and UEFI is disabled... I dont know what to do next.... Im so depressed... any ideas how to install windows?

    ok, yesterday I tried somthink... first I tried install ubuntu on ssd and its worked, ubuntu worked fine. So then I tried again to install windows, I run setup, it showed me 3 partitions that ubuntu made, so I delete them and just pressed next with unallocated disk and boom it showed me istallation progress... but stuck on first step of copying files at 0%... so no windwos... I waited for like 20mins then pressed cancel, it gave me next screen that installation canceled and I was unable to turn off setup... so I just powered off laptop. and then... I cant connect my SSD, my laptop was unable to start at all with that SSD, when I connect it with usb adapter it just stuck at recognizing it, I cant to format it nothing, its like SSD is bricked... I tried again install ubuntu on ssd but installation gave me input output error, so yeah.... now I think its just left to me bring it to the warranty... ;(

  • How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

    This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
    I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
    here. Maybe this helps other users.
    I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
    Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
    The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
    The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
    You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
    I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
    never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
    You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
    Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
    products.
    Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
    Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
    Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
    Open a command prompt. CD to the following directory:
    \Program Files\Common Files\Lenovo\BMGR
    On a german language system (like mine) it is
    \Programme\Gemeinsame Dateien\Lenovo\BMGR
    If you have an older IBM system the directory may be named
    \Program Files\Common Files\IBM\BMGR
    or something like that. Maybe you need to search around.
    In the following, I will call this the "BMGR dir".
    Enter the following command:
    bmgr32 /info /v
    You should get an output similar to this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 4   Checksum: 03    Passed
            MBR Sector 3 Index: 5   Checksum: FD    Passed
            MBR Sector 4 Index: 6   Checksum: 58    Passed
            MBR Sector 5 Index: 7   Checksum: 96    Passed
            MBR Sector 6 Index: 8   Checksum: 7F    Passed
            Data Sector  Index: 3   Checksum: F1    Passed
            Original MBR Index: 2   Checksum: BD    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
            Boot Config: 2 (Service Partition containing two Service OS's)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   239 255 255           63    301296177
     1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
     2   0x00   0x00      0   0   0     0   0   0            0            0
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
    partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
    for you.
    Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
    Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
    Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
    Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
    bmgr32 /info /v
    The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
    shows a smaller value.
    Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
    Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
    DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
    environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
    Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
    Continued in the second post...

    Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
    Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
    Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    Opened Master Boot Record to see whose MBR it is.
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
    Otherwise the following step will likely screw up you harddisk.
    Enter the following command (case sensitive?):
    bmgr32 /Fbootmgr.bin /m0 /IBM /v
    The output will look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
    installing MBR
    finding free sectors
    Sector 9 is free
    Sector 10 is free
    Sector 11 is free
    Sector 12 is free
    Sector 13 is free
    Sector 14 is free
    Sector 15 is free
    Sector 16 is free
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Setting Think bit
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
    Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 11  Checksum: 03    Passed
            MBR Sector 3 Index: 12  Checksum: FD    Passed
            MBR Sector 4 Index: 13  Checksum: 58    Passed
            MBR Sector 5 Index: 14  Checksum: 96    Passed
            MBR Sector 6 Index: 15  Checksum: 7F    Passed
            Data Sector  Index: 10  Checksum: 01    Passed
            Original MBR Index: 9   Checksum: 12    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
            Boot Config: 0 (Service Partition containing one Service OS)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    So you have actually regained the Lenovo bootmanager. But you are not done yet.
    Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
    Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
    Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

  • How to install Windows 8.1 Pro on Macbook Pro

    Hello everyone,
         I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
    After finishing the downloading process, I received this file which is about 4GB large.
    When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
    At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

    You need a 'Full' Installer.
    From Boot Camp 5.1: Frequently asked questions - Apple Support
    Which versions of Windows work with Boot Camp 5.1?
    Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
    Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
    It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

  • How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

    how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
    Iam new to coding. please help me.

    try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

  • How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

    How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
    I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
    I try many time, but after restart bootcamp partition, apple show blinking folder error
    I think this firmware not support to install windows by usb
    NOTE:
    I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
    If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC  ? 

    I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
    But- are you trying to reboot with both the USB install and the DVD install both plugged in?  that would definitely cause confusion.
    Do this, reboot with NOTHING plugged in.  Once you hear the Mac chime, immediately press and hold option.
    You should only see the Mac HD, and Recovery Partition.
    THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows.  If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing.  I had to do it this way on my mid 09 MBP.
    Let me know if this works to start the install.  If not we may have to start over with Bootcamp Assistant

  • How to install Windows 8 on Macbook pro with retina display ?

    Hi - How to install Windows 8 on Macbook pro with retina display ?
    I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
    I am not interested to install it through Parallels or Fusion. Plz guide.
    Thanks !

    OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
    Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

  • How to install Windows 8 on Macbook Pro w/ Retina Display?

    Hi,
    I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
    Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
    Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
    I will be very thankful. Please help!
    Thanks

    Hi Mende1,
    Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
    Well, The Guide is simple but there are few questions which I'm not able to understop still.
    1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
    2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
    Thanks

  • How to install Windows 8.1 without optical drive

    I just got a ZBook 14 which was preinstalled with Windows 7. I want to use Windows 8.1 Pro which was alsp delivered on DVDs in the packages. However, this machine does not come with an optical drive. How can I install Windows 8.1 on this machine?
    Thanks

    Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and  any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive.  I suggest you do not give advice unless you know what you are talking about.
    For all others thatwant to the same thing.
    1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
    2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
    3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
    Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

Maybe you are looking for

  • Audio Service is not Working.

    HI everybody, So today i just turned my pc on after a few days and noticed that there was RED CROSS "X" on my volume icon. It says that Audio Service is not working. i opened services(service.msc) searched for it and when i tried to start it gives me

  • HOW TO BRING THE DEPOSITS IN SAP

    How do we bring the depostis in SAP from legacy system. If we create a customer migration g/l account, it will debit the migration g/l account and credit the customer. but can we use the same g/l migration account to bring in the open balances of cus

  • Snow Leopard Server Trial version caused macbook to crash at installation

    I was testing out snow leopard and had problems installing it. My macbook crashed and I don't know how it happened. Everyone should know that you will need mobileme if you have this software, it uses that as the startup disk.

  • Group by- Max values+equal values

    Hi Experts, I am looking for a query where i can group the data accordingly and exclude the rows which i don't need.please help to arrive this. i have the data like this in my table Cust_id type count 10 abc 19 10 abcde 19 10 abcde 8 20 e 8 20 u 4 30

  • Muvo Sport C100 Serious Problem

    My Muvo sport c00 player it`s almost dead...when i turn my player on,i get this message " file system error"...the player has 256 Mb memory...i tried to format the dri've with FAT file system and worked , but i can`t copy any songs on mp3 player, i t