How to install Windows 7 on E20 with only DOS and no DVD/floppy driver?

I am considering buying the cheapest E20 - with following configurations:
ProcessorIntel Pentium G6950 Processor (2.80GHz 1066MHz 3MB) - 73W
Operating system DOS (No Software Preloaded)
Tower 4x5 Mechanical with Intel 3450 Motherboard
1GB PC3-10600 1333 MHz DDR3 SDRAM DIMM
Integrated Video
No CD/DVD/floppy
No monitor
I tried to search the internet for instructions to install Windows 7. But there is not many discussion threads. Has anyone on this forum has had experience in doing that and wants to share.
Thanks for your help.

http://technet.microsoft.com/en-us/magazine/dd535816.aspx
obviously you don't have cd drive, therefore you should follow the above instruction to install the windows 7 from a usb key.
The integrated video card should have at least a vga output, which will work with your dell monitor, provided that monitor is working.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • How to install Windows XP in parallel with Mac OS on a Macbook?

    Can anyone tell me how to install Windows XP in parallel with Mac OS on a Macbook?
    If I divide the hard drive into 2 patritions and install Win XP & Mac OS on each patrition, is it ok?

    I don't think he meant "Parallels", I think he just meant "parallel", with a little 'p'.
    There are three options for running Windows software on an Intel-based Mac:
    Virtualization: you can install software such as Parallels or VMWare (along with a licensed copy of Windows) which will emulate the environment necessary to run Windows software. Performance is significantly degraded, but you can work with both Windows and Mac software simultaneously.
    Dual boot: You can use Apple's Bootcamp to partition your drive and create a CD of Windows drivers for your devices, so that you can then install Windows on one partition of your drive. Your Windows software will run just as it does on any other Windows PC, but you have to reboot to switch between Windows and OS X.
    Crossover: Crossover is a product that allows you to run Windows programs in OS X without installing Windows. Not all Windows software will work with Crossover though.

  • How to Install Windows 8.1 Pro with Bootcamp

    I have an early 2011 MBP 15" that's running Mavericks, and I just got Windows 8.1 Pro with an install disc. I'd like to install W8 with Bootcamp, but I can't seem to find any guides on doing this, as most people have retina MBPs which have no optical drive (bad design choice, IMO), so they utilize a flash drive. How would I go about doing this properly?

    Welcome to Apple Support Communities
    With a disc it's much easier to install Windows 8.1 on your MacBook, because the steps are the same as for any other Windows version.
    Boot Camp Assistant (in /Applications/Utilities) will guide you through the first steps. Then, follow Apple's steps to install Windows 8.1 > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • How to install windows 8 using bootcamp with no optical drive

    Hi,
    I have a mac book pro 17" late 2011 with Mountain Lion installed.
    I have previously installed a windows 7 using bootcamp without an optical drive by creating an install disk as part of boot camp option.
    I still don't have an optical drive.
    The other day I removed my Windows 7 since I want to try Windows 8 but when I try using boot camp to install windows 8 it is asking for an optical drive and the option to create an install disk is not available anymore.
    Any idea on this issue?
    Thanks much

    Windows 8: enable Hyper-V, it really helps.
    http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/
    http://www.windows-now.com/blogs/robert/hyper-v-3-0-confirmed-for-windows-8-clie nt.aspx
    http://www.windows8update.com/2011/12/06/enabling-hyper-v-in-windows-8/ 
    http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
    Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems
    http://www.howtogeek.com/107173/disable-windows-8s-adaptive-brightness-to-fix-da rk-screen-problems/
    It should be straight forward and no different, except you are burning an ISO and that always needs to be done at slowest burn speed for any version of Windows.Otherwise it won't work (even if it manages to install it will fail on restart or some other point).
    Windows 8 Release Preview
    http://msdn.microsoft.com/en-us/windows/apps/default
    https://blogs.msdn.com/b/b8/?Redirected=true

  • How to install Windows 7 on MacBook with Tiger + Leopard upgrade using Boot Camp

    Hi,
    I've had Vista installed on a separate partition on my MacBook for a while, but wanted to upgrade to Windows 7. I've completely wiped the HDD, re-installed Tiger, upgraded to Leopard and installed Windows 7 using boot camp from within OSX. However, I now can't boot back into OSX - I believe it's because I don't have the latest version of Boot Camp within Windows 7 (it doesn't appear on the task bar), but I also don't have a full copy of Leopard, only the upgrade disk.
    Is there any way to (a) boot back into OSX (I've tried holding down the option key and this doesn't work) and (b) installing a version of Boot Camp that will enable me to switch between both operating systems as I was when Vista was installed & without having to purchase the full copy of Leopard?
    Any assistance would be much appreciated.
    Many thanks,
    Elliot.

    Try to boot from the 10.4 disk then and "Repair Disk". If you can, then try booting from the 10.5 disk and do the same.
    Have you tried holding down the C key also when trying to boot from the Install disks? It could take 30 seconds to a minute or more for the C key/Option key reboots. The Mac DVD HAS to be the OS installer disk not the applications installer, etc,. Sorry if I keep bringing this up.
    You have to keep holding it down the whole time it boots, either it will bypass it and reboot into Windows or it should get to the boot loader window with at least Windows showing up.
    If you can still boot into Windows with no problems then Windows SHOULD show up in the boot loader window. (C key/Option key) It's hardware related, it's the computers manual way of looking for a bootable OS if there's no OS installed yet.
    Don't forget to disconnect any USB devices until you get it fixed.
    Also try to boot from the Windows  installer disk and "Repair Windows" and see what happens.
    Other then your DVD drive may be on it's last legs, I can't really think of any reason you can't boot from the Mac DVD's.  All the other post's I searched for eventually got the DVD boot working, even 10.6 and 10.7 are having that issue, tho rarely.
    elliotfromnewark wrote:
    Hi, ...........inserting the Leopard disk once in Windows to install boot camp and it says that the version on the DVD is only compatible with XP SP2 or Vista.................
    Don't run the installer this time, if a window pops up to "Run" or "Open",  just open it. If it doesn't open the DVD and look for the BootCamp.exe. Right click on the .exe (or whatever it's called) and select the trouble shoot compatibility mode and select Vista. Yes, I know you have W7. See if that works.
    It may have buggered the Mac OS side so you may have to get DiskWarrior (worked for some) or the like in order to fix it. It would definitely be useful in the future.

  • How to install windows remote desktop services with Microsoft Remote desktop License

    Hi
    we have plane to install a server in our company, having windows server 2008 R2 - 64 bit. and also buy 10 RD cal.
    now how can install RD call after installing windows OS.
    kindly help will highly appreciate.
    Arvind

    Hi Arvind,
    On your server, using Server Manager, you need to install RD Session Host and RD Licensing Role Services at minimum.  After install you should set the licensing mode to match the type of RDS CALs you purchased as well as Specify the licensing server
    name (itself).  You may do this in RD Session Host Configuration (tsconfig.msc) or via group policy.
    Next in RD Licensing Manager you need to Activate your licensing server.  Before you can install your purchased 2012 RDS CALs you will need to contact the Clearinghouse and have them downgraded to 2008.  Please have your licensing number,
    authorization number, licensing paperwork/emails ready before you call them.
    Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
    http://technet.microsoft.com/en-us/library/cc754874.aspx
    Thanks.
    -TP

  • How to Install Windows 7 on an HP Pavilion g6 g6 -2200ee

     Hi, sir, i bought a new HP Note Book Yesterday it as Loaded with Win-8 OS and i want to Change the OS to Win - 7, while i enter to the booting option .i cant see any bootdevice from CD/DVD Option . will you please help me to find a solution .. .. .. ..  Thanks & RegardsShan

    *****Disclaimer*****HP doesn't recommend the installation of Windows 7 on a computer shipped with Windows 8, nor will it support the installation of Windows 7. HP will not provide Windows 7 drivers and suitable drivers may not be available for the hardware in the computer. Also, Windows 7 may not support some of the hardware or software features designed for the computer. Make sure you create your HP Recovery Discs or USB Flash Recovery media before modifying or changing ANYTHING. You will need to DISABLE "Secure Boot" and maybe ENABLE "Legacy Support" in the "BIOS Secure Boot cofiguration" on the settings page shown below before you can attempt to install Windows 7;  or  Additionally, as the hard drive is partitioned as GPT, you must boot the computer using the "UEFI - CD/DVD drive" or "UEFI- USB Flash Drive" options in the "F9" boot menu. If something to that effect doesn't exist in the boot menu, please post a screen shot and/or describe the listed boot options. I suggest using Windows 7 SP1 for the best intallation experience. If you need Windows SP1, please see "How to Install Windows 7 Without the Disc" to download and create your own. If the DVD refuses to boot as UEFI, you may need to use a USB Flash drive (may require DISABLING "Fast Boot" in the BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. The USB Flash may not be recognized as a valid UEFI boot source by some computers if it is formated as NTFS and may require some modifications to work correctly. Here are the specs for your HP Pavilion g6-2200ee Notebook Computer. The HP Pavilion g6-2200ee Notebook PC Drivers page for your computer, appears to only have drivers for Windows 8 and 8.1.  Please post the Windows Device Manager's "Hardware Ids" for any additional missing or unknown devices, as shown in the example below;  If you have any further questions, please don't hesitate to ask. Please click the white KUDOS star to show your appreciation

  • How to install Windows 8 on Macbook pro with retina display ?

    Hi - How to install Windows 8 on Macbook pro with retina display ?
    I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
    I am not interested to install it through Parallels or Fusion. Plz guide.
    Thanks !

    OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
    Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

  • How to install Windows 8.1 with Windows 8 Product key?

    I have purchased Upgrade pack from Windows 7 to Windows 8. I have also Updated the OS to windows 8.1 through Store. How to install Windows 8.1 with Windows 8 Product key?

    The download link for the Windows 8.1 installer at the Upgrade with Product Key Only does not accept a Windows 8.0 product key. I ended up using the trick suggested by Andre Ziegler in this thread to obtain the 8.1 download independent of the Windows
    Store, but I haven't yet checked if the 8.0 key works from 8.1 Setup.
    I do IT for a living but I have plenty of family members that bring their notebook PCs to me and ask me to do the heavy lifting, and I'd rather not re-download the same 3.6 GB every single time someone tells me to fix their PC. I also want to be able to
    re-install 8.1 from the source media in case of a catastrophic hard disk failure and I have to replace the disk.
    As an aside, tools that retrieve product keys for installed products end up retrieving the 8.0 product key from an 8.1 install that was upgraded via the Store.  It kind-of makes sense that an 8.0 key could work to install 8.1 because 8.1 is supposed
    to be a free upgrade for licensed 8.0 users, but this doesn't seem to work until after 8.1 is successfully installed via some trickery and the user supplies the 8.0 key to activate it.

  • How to install windows 8 onto an external hard drive connected with usb 2.0?

    How to install windows 8 onto an external hard drive connected with usb 2.0?

    Transfer win 8 from inside hd to external hd. 
    Cloning Win 8 is also OK. 
    Aomei Backupper can do the above. 
    In additional, Do you know Windows to Go? 
    http://www.disk-partition.com/features/windows-to-go-creator.html

  • How to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q.

    how to install Windows 8 or 8.1 on linpus linux with usb? I have Acer aspire E5-551G-t16q. 

    Welcome to Apple Support Communities
    Your MacBook Pro is not designed to install Windows through an USB drive, so do not use this option. You are getting a white screen because your MacBook cannot start up from the USB drive with Windows.
    Instead, use a DVD with Windows, so you will be able to install Windows. Follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    Mid 2009 MacBooks Pro do not support Windows 8 officially

  • How to install Windows 8 on Mid 09 Macbook Pro (10.8.3)

    So i loved the new Windows 8, and even had it installed before bootcamp supported windows 8 on my new iMac, i waited to buy a bigger hard drive and more ram for my mid 09 Macbook Pro.  The day i bought the new hardware, Apple released 10.8.3, and an updated bootcamp to support Windows 8!  Yay!  I got my install disc out (iso file burned to DVD), opened up bootcamp assistant, only to get an error saying apple dropped support for my mid 09 Macbook Pro and Windows 8.  Making the install impossible through bootcamp.  Do not fret, i have the solution, and EVERYTHING works perfectly.  Here we go.
    Gather your Windows 8 install disc AND a Windows 7 install disc (you can surely find one by searching the net, use your old one, or borrow a colleagues... we are licensing Windows 8, NOT 7, this is just for my trick to fool bootcamp assistant and no i do not condone piracy)
    Inside BootCamp Assistant, the driver download may hang,it did for me, twice..could be heavy usage due to the popular new update...so i recommend downloading it faster, and manually here http://support.apple.com/downloads/#macoscomponents  and get 4.1.4586  yes this is for windows 7, ALSO while you are there, download the windows 8 support pack 5.0.5033, as we will need that later as well.  As a matter of fact, DO IT THIS WAY and dont bother
    That being said and done, in BootCamp Assistant (OSX), only check off Install Windows 7, leaving the download support software unchecked
    Partition your hard drive as youd like, this splits up your storage space however you like, keep in mind which OS you plan to run the most, and obviously give that one more room, i.e you do all your Photoshop work, and app development in OSX, and only use Windows for office stuff, you'd want to give yourself more room on the OSX side.  I however bought a huge new internal drive to split them basically in half, as i use them both frequently.
    This step is where the trick comes.  OSX 10.8.3 / BootCamp will advise you there is no support for Windows 8..only 7 with your Mid 09 Macbook Pro if you have put your Windows 8 disc in, upsetting you as it did me...possibly bringing you to this post, thats not FAIR is it?  Your 09 MacBook Pro is still JUST AS GOOD as a lot of PC's running Windows 8, why they excluded this model i have no idea...im sure they had reasons, but i dont care at the moment..lol
    INSTEAD place a Windows 7 install disc in, and click next.  BootCamp Assistant will now partition your drive, make the windows side bootable and restart your  MBP.
    Let it do its thing, and eventually you will land at the Windows 7 installation interface.  We don't really want that, we want Windows 8 right? 
    Click the "x" to close the installation for Windows 7, it threatens your MBP will restart, and allow it to do so.
    **IMPORTANT**  Once you hear the beloved Mac chime, quickly press and hold the "option" key.
    This brings you to an area where you can select a startup disk.  At this point, lets get rid of the trick.  Hit your eject button and get rid of the Windows 7 install disc, we are done with it now.
    You now, well in my case anyway, should only see your Mac HD, and the Recovery Disk. 
    Insert your Windows 8 install disc
    Now WAIT.  Eventually, you should see a new DVD looking icon that says Windows pop up next to the MacHD and Recovery Disk.  (depending on what you called your iso, it may something else...not sure, but you cant miss the new entry)
    This is where a wired mouse will be needed, or use tab/space/enter to navigate to the new Windows Disc icon and launch it.
    You are now in Windows 8's installation interface, cool!
    Follow the steps until it asks you where you want to install it.  You should see a partition about equal to what you set earlier in BootCamp Assistant, and it SHOULD say Bootcamp right on it.  Select this partition.  (mine was the last one, the fourth i believe)
    OH NO, it says you cant install it to that partition, this is normal.  You need to highlight/select this partition, and click format.  I cant remember, but i think you have to click "options" to get to a the spot where you can format it.  Pretty straight forward.  Safety check, obviously make sure you have the Bootcamp partition selected, dont format your Mac OSX partition!
    After the quick format is done, Windows 8 installer will then allow you to click "next" and from there the magic happens.
    Go through the whole Windows 8 install, and setup how you would like, this takes awhile, and im not covering that, as its a hand in hand walkthrough like any other install.
    Once your inside your new Windows 8, you'll see a bunch of things not working, like tap to click on your trackpad, no on screen displays for brigtness, volume, and possibly other stuff.  Not cool right? 
    Grab your USB stick, or Burnt disc that you applied the bootcamp support downloads to in the begining of this tutorial.
    FIRST open the Windows 7 Bootcamp install, 4.1.4586, open the folder and find setup.exe and run it (we are in windows 8 now)
    It takes a while, but Apple's BootCamp will install a bunch of drivers, etc, and eventually restart your MBP, which is cool, let it do it.
    Upon finishing, lets go back to the USB/Burnt Disc where all your support software was saved, and lets get the newly support BootCamp 5.0.5033 opened up.
    Big Thanks to a post by ErikVanD i seen on this forum for the next step.
    If you want, try and click setup in this latest BootCamp support set, and you will get another sad error claiming x64 is not supported, something awful to that nature.  Awww man, this far, only to get let down.  Nope.  We are going to fix that.  And this is where ErikVanD's post pointed me to what we do next.
    It was said to navigate in the BootCamp 5.0.5033 folder to something of the effect of BootCamp/Drivers/Apple and run the MSI file "BootCamp"  (MSI file will say Windows Installer in its description, and not necessarily MSI for anyone not too savy with Windows) **note - NOT .bootcamp (notice the period in the front) and it should work and install the new Windows 8 support for your MBP...but in my case it didn't, which is why im posting how i fixed this.  Your setup may somehow be different, but mine gave me an error say it "needs elevated permissions to run, use setup.exe instead.  We tried that remember!  And it gave us the x64 not supported error.  Oh man!  Blabbing aside, this file needs to be ran as an administrator, which yeah your the only user, but Windows is funny like that.  Normally youd just right click, and select run as administrator, but out the box, that option isnt there when you right click, only install, repair, open with etc.  Here's the next trick, you need to add a registry file to enable running as an administrator, dont be afraid, this is an old trick, and really easy. 
    Open notepad in Windows, and create a new doc, call it Add_MSI_run_as_administrator.reg
    Paste this following code into the new doc
    Windows Registry Editor Version 5.00 
    HKEY_CLASSES_ROOT\Msi.Package\Shell\runas] "HasLUAShield"=""  [HKEY_CLASSES_ROOT\Msi.Package\shell\runas\Command] @=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\    00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\   73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\   00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
    Or download the file already made from my company server at http://www.theprojectdev.com/public/pub.html  **i put this there as a courtesy to help others like me, its just a complete reg file, so either create your own through copy and pasting above or download it.  Either way, put it on your desktop.
    Now double click the new registry file, and allow/ok it to do its thing. 
    Once done, you can discard the file from your desktop, or keep, your choice.
    Guess What!?  Now we can do the impossible!  Lets revisit that solution from before by going to the newest BootCamp 5.0.5033, and navigate to BootCamp/drivers/Apple and select that tricky BootCamp MSI file that wouldnt allow us to run, this time RIGHT CLICK it.  Because of our new registry entry we placed, we now have an option to "Run as Administrator"  Click that option.
    WooHoo!  We have done what coudnt be done, BootCamp will now walk you through the installer, and add all the great support for Windows 8 on your mid 09 Macbook Pro that they for some reason neglected!
    After the update, you will endure yet another restart.  From there, most likely using a wired mouse still, navigate to the system tray icon on the bottom right corner of the screen (little up arrow) and click it.  It will pop up a little menu, showing system processes/stuff running, click the gray squared diamond (this is bootcamp) and it will bring up the newest BootCamp control panel.  From here, you can nav to trackpad/touchpad and set tap to click (finally) and gestures, etc.  This control panel has lots of good stuff to make a MBP user feel comfortable in Windows 8.  There you go!  You did it!
    I really, sincerely hope this helps someone, as it really made my day to get this resolved.  I want to add that all On Screen Displays will work (your volume/brightness etc)  they keyboard backlighting, and so much more, it really works great.  I upgraded my hard drive to 1tb, and installed 8gb of PNY RAM from best buy ($40) and it runs Windows 8, AND OSX fantastically.
    My company http://www.theprojectdev.com designs and develops mobile apps (iOS and Android) and web design and development, so im a heavy user of both OS's, and this setup is just the best thing that has happened to me in a portable sense. Runs so so so fast!  Enjoy everyone! 

    **********************IMPORTANT EDIT TO THE TUTORIAL***********************************************************
    Everyone im sorry, i made a mistake informing you which BootCamp support drivers to download from Apple.  You see I originally downloaded my Windows 7 Support from the BootCamp Assistant, and had the version number completely wrong. 
    The first BootCamp install packahe you should down load from http://support.apple.com/downloads/#macoscomponents is actually 4.0.4033 
    That will be your first BootCamp installation in Windows 8 that works.  Im so sorry Markeez for wasting your time, my excitement had blinded me last night.
    Also be sure to copy both 4.0.4033's folder and the latest 5.0.5033 folders to your Windows 8 desktop as well, dont run them off your USB stick or DVD/C, whatever media you copied them to.
    So Markeez, after you download the correct Windows 7 Support Software 4.0.4033, simply click setup.exe and it will run without any trouble.
    Then after the inital BootCamp install is complete, your MBP restarted and all is done, you need to perform the "Run as Administrator" trick i posted above.  Its real easy.  Open notepad, and copy the EXACT code i posted in the tutorial in a fresh new doc, and save the file to your desktop EXACTLY how i posted it Add_MSI_Run_as_administrator.reg 
    Now close notepad, and double click the newly created registry file, and allow it access to do what it needs.  What this does is allows your run the new installer in BootCamp 5.0.5033 as an administrator, which you wont have the option to unless you use this registry file.  
    Ok after the registry part is done, go inside the latest BootCamp 5.0.5033 folder, to BootCamp/drivers/Apple and find BootCamp --- probanly the ottom most MSI file, and again it will not say MSI on the right side, it will say Windows Installer or something to that degree.  Also do NOT confuse it with a similar file in that folder called .bootcamp  this is not the one we need.   OK, so now, using a WIRED MOUSE, right click the BootCamp MSI file, and you will now have the option to Run As Administrator, if you did the registry bit.  IF YOU DIDNT do the registry bit, you will only see Install, Repair, Uninstall etc.  If thats the case, just download the zip from my company site, it contains only a completed copy of that reg file.
    Running this file in the Apple folder as an admin is the key to making this work, let me know if you have any further issues, im watching.  Also i apologize everyone, but for some reason i cant edit the tutorial to fix my mistake, very sorry about the confusion.

  • How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

    This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
    I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
    here. Maybe this helps other users.
    I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
    Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
    The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
    The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
    You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
    I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
    never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
    You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
    Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
    products.
    Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
    Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
    Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
    Open a command prompt. CD to the following directory:
    \Program Files\Common Files\Lenovo\BMGR
    On a german language system (like mine) it is
    \Programme\Gemeinsame Dateien\Lenovo\BMGR
    If you have an older IBM system the directory may be named
    \Program Files\Common Files\IBM\BMGR
    or something like that. Maybe you need to search around.
    In the following, I will call this the "BMGR dir".
    Enter the following command:
    bmgr32 /info /v
    You should get an output similar to this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 4   Checksum: 03    Passed
            MBR Sector 3 Index: 5   Checksum: FD    Passed
            MBR Sector 4 Index: 6   Checksum: 58    Passed
            MBR Sector 5 Index: 7   Checksum: 96    Passed
            MBR Sector 6 Index: 8   Checksum: 7F    Passed
            Data Sector  Index: 3   Checksum: F1    Passed
            Original MBR Index: 2   Checksum: BD    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
            Boot Config: 2 (Service Partition containing two Service OS's)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   239 255 255           63    301296177
     1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
     2   0x00   0x00      0   0   0     0   0   0            0            0
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
    partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
    for you.
    Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
    Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
    Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
    Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
    bmgr32 /info /v
    The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
    shows a smaller value.
    Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
    Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
    DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
    environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
    Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
    Continued in the second post...

    Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
    Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
    Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    Opened Master Boot Record to see whose MBR it is.
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
    Otherwise the following step will likely screw up you harddisk.
    Enter the following command (case sensitive?):
    bmgr32 /Fbootmgr.bin /m0 /IBM /v
    The output will look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
    installing MBR
    finding free sectors
    Sector 9 is free
    Sector 10 is free
    Sector 11 is free
    Sector 12 is free
    Sector 13 is free
    Sector 14 is free
    Sector 15 is free
    Sector 16 is free
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Setting Think bit
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
    Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 11  Checksum: 03    Passed
            MBR Sector 3 Index: 12  Checksum: FD    Passed
            MBR Sector 4 Index: 13  Checksum: 58    Passed
            MBR Sector 5 Index: 14  Checksum: 96    Passed
            MBR Sector 6 Index: 15  Checksum: 7F    Passed
            Data Sector  Index: 10  Checksum: 01    Passed
            Original MBR Index: 9   Checksum: 12    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
            Boot Config: 0 (Service Partition containing one Service OS)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    So you have actually regained the Lenovo bootmanager. But you are not done yet.
    Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
    Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
    Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

  • How to install Windows 8.1 Pro on Macbook Pro

    Hello everyone,
         I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
    After finishing the downloading process, I received this file which is about 4GB large.
    When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
    At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

    You need a 'Full' Installer.
    From Boot Camp 5.1: Frequently asked questions - Apple Support
    Which versions of Windows work with Boot Camp 5.1?
    Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
    Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
    It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

  • How to install Windows 7 on a MacBook Air?

    Hi everybody,
    I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
    I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
    I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
    I have tried to run bootcamp and follow the instructions, but to now end.
    on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
    when i start boot camp on my iMac, this option will be greyed out.
    Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
    does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
    Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
    thanks!

    30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
    http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
    There is a program to create DVD from ISO or .exe
    Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
    Disk Utility is not a good method for burning Windows DVDs.
    http://simplyburns.en.softonic.com/mac
    https://discussions.apple.com/thread/3241150

Maybe you are looking for