How to install windows 7 on early 2008 macbook pro?

I have an early 2008 or late 2007 probably macbook pro. I was running windows xp via bootcamp on it. i want to install windows 7 on it.
i read the apple statement about my macbook pro not being compatible with it.
is it because of the hardware or just the leopard software?
Can i upgrade my leopard to snow leopard and then be able to install windows 7 on it?
Just want to know if spending $ 30 on leopard upgrade is worth it since i will do it just to run windows 7.
Please help

just a little bump for help, please

Similar Messages

How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.

try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

Is 8 gb of RAM safe to install in my early 2008 MacBook Pro? Apple says 4 gb is the maximum.

Apple says that my early 2008 MacBook Pro can only have a maximum of 4 gb of RAM. Has anybody tried adding more than the recommended max? I have heard people say 8 gb is ok but wanted to know if anybody has actually done this. I run parallels desktops with windows 8 and it is incredbily slow. I was thinking if I upgraded the RAM I could dedicate more RAM to both Windows and OSX.

It would appear that the maximum of RAM that an early 2008 MBP will accept is 6 GB. The specifications are: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM. I cannot give you a definitive answer since I do not know the exact model number of your MBP. I suggest that you check with OWC and/or Crucial for a definitive answer to your question.
Ciao.

How can I connect my early 2008 MacBook Pro to a tv through HDMI?

I was wondering if there is a way to connect my early 2008 MacBook Pro to a tv using an HDMI port. My MacBook Pro has a DVI output. In the past I bought a DVI to VGA adapter and connected it to a TV that had a PC input that took VGA and a 3.5mm audio cable. I was wondering if anybody has found an adapter or cable that takes a DVI and 3.5 mm audio cord and has only an HDMI cord at the other end. I have a new TV that only has HDMI inputs and would like to be able to connect my laptop to it.

Since you have not identified exactly what MBP you have, but mention DVI, I suspect a cable such as this is what you will need.
http://www.ebay.com/itm/like/380694416929?lpid=82
Understand that 2009 MBPs and earlier do not support audio via DVI or minidisplay port. You would have to tap the audio output port with a cable such as this:
http://http://www.bhphotovideo.com/bnh/controller/home?O=&sku=691009&Q=&is=REG&A =details
I am not endorsing these cable specifically, these are just examples that represent what connections that are required.
Ciao.

How to Install Windows 8.1 on MacBook Pro with Retina Display Using Boot Camp?

Hello,
I own a MacBook Pro with Retina Display and was wondering how do I install Windows 8.1 without an optical disc drive? I have bought the full version of Windows 8.1 and would like to partition it on my MacBook Pro. Could someone please help me out by posting step-by-step procedure or a video on how to do it? It is my first time partitioning the Windows operating system and would like to clarify with the community on this before I install it.
Thanks in advance for those who have helped!

Windows 8.1 is not yet supported by Boot Camp. The best way currently to install Windows 8.1 is to use a virtual machine like Parallels, Fusion, or VirtualBox. Installation instructions are on the Parallels, Fusion, and VirtualBox site.

How to install Windows 8.1 on Macbook Pro

I have a 13-inch Mid 2010 MacBook Pro operating on OS X Mavericks 10.9.2. I recently purchased Windows 8.1 as I was told by the Geek squad I could install it on my MacBook Pro. I keep getting this message every time I try to run BootCamp I get this:
So what am I suppose to do? Can I even install Windows 8.1 on this MacBook Pro???

MeeshyMee,
the 13-inch Mid 2010 MacBook Pro (which is the model that I have also) isn’t able to run Windows 8.1 using Boot Camp, because Boot Camp 5.1 is needed for Windows 8.1, and our model MacBook Pro can only run up to Boot Camp 4. You might be able to run Windows 8.1 on your MacBook Pro inside of a virtualizer such as Parallels Desktop or VirtualBox.

How to Install Windows 7 on 15" Macbook Pro (Mid 2010)

Hi,
I am trying to install Windows 7 on my mid 2010 MBP 15" (Boot Rom: MBP61.0057.B0F). However, the internal DVD Rom stopped to work, so I got both an external DVD Rom and a bootable USB stick (with Windows 7). The OS X is 10.8.3.
When I run the Bootcamp Assistant, after re-divde the disk and reboot, it stuks (with either the USB stick or the external DVD Rom) at the Apple logo screen (sometimes before that -- the scree is all white). When I reboot again, it reports no bootable device.
Does anyone know how to solve this? Thanks a lot!

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

Early 2008 MacBook Pro hard drive was killed; how to sync stuff

My early 2008 MacBook Pro hard drive was reimaged (not by me) and they lost everything on there, and have now put in a new hard drive, saying nothing was salvageable on the original HD. I have an iPhone, iPod, iPad. When i get the MBP back, how will I be able to get those devices synced so that everything I've bought/have goes back onto the HD?
The original HD was being reimaged because my work requires use of Windows, and I was using Windows via Boot Camp. Windows got a terrible rogue virus (from my clicking on a link), which shut everything down on that side. Work tech folks said they needed to reimage the Windows part of the drive, but said in the process, the reimaging took everything, Mac stuff included. That's why I'm in this situation. They are going to put in a new hard drive, but it is a blank slate.
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes. (For those who say shame on me, for not doing a backup sooner, you're right: But we have gone through 3 moves in 18 months, so it has been kinda nuts.)
I expect the MBP to get sent back to me in the next day. I have no idea how to put these pieces back together. I'm not even sure about data recovery, but am most concerned about iTunes/iPhone/iPod/iPad.
Thanks for your help!

suzannemacuser wrote:
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes.
Two years ago??? Shame on you!!!
I found this the other day. It's old but still applies. This should be more than enough to help you get back on track. See the comments by Zevoneer
https://discussions.apple.com/message/7217190#7217190
You will have to check on each of these. Some of the links are outdated but there is more than enough to get you started. See this article about transferring purchases. The link is in the other thread as well.
http://support.apple.com/kb/HT1848?viewlocale=en_US
Backup! Backup! Backup!
Message was edited by: Demo

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
-I have a flashdrive with win7 on it.
-I mounted the ISO of win7 with toast for bootcamp to do its thing.

Good luck.
Consider this a bump so that hopefully someone with better news spots your thread.
Allan

How can i install windows games in my macbook pro

I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

I'd like to replace my hard drive. How do I know what to buy for my 15-inch early 2008 MacBook Pro?

I am out of room on my hard drive. I'd like to get a new hard drive and restore my data to the new drive from Time Machine. How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro? Also, how hard is this to do?

I have changed HDDs several times on the old MBP. Currently it has a Hitachi 500 GB HDD that came out of my new one. My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice. Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD. I will be very surprised if there are compatibility problems.
If you bought the HDD from OWC, you should have received Installation instructions. If not, go to the OWC website and look at the video. I actually downloaded it so that I could hand write the instructions down step by step. Also check out iFixit website. They have step by step instructions that may prove to be useful.
Tools you need: 00 Phillips and #6 Torx Drivers (get good ones). The instructions make mention of a plastic pry bar (spudger). I use a stiff piece of plastic like a credit card.
Tips to keep in mind: Get a large open table space and place a large clean towel on it. That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
As you take out a set of screws, keep them together (I use wide masking tape. The little screws will stick to it.)
Keep the sets in sequence. That will make reassembly much, much easier.
The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board. In case of the former, work from the back (the display) to the front. You will initially have to pry it up and then do a lot of jiggling to remove it. Don't be too timid about it. At the end of the ribbon cable there is a rectangular connector. Use your credit card to remove it. Just pry it off.
The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think). If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
Good luck and make sure that you don't have parts left over.
Ciao.

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

HT3986 I have installed windows 7 into my macbook pro 15 inch with lions. This computer is the current 2.2 GH i7 chip with 500 GB HD. Now, how do I install the drivers. When I started boot camp, the system prompted me to create a CD. What do I do with

I have installed Windows 7 into my Macbook Pro 15 inch with Lions as operating system. (current model with 2.2 GHz i7 processor, 500 GB HD ad 5400 rpm). When I started with boot camp, the system promped me to create a disc, which I presume is for the drivers for windows 7. Now windows is intalled. What do I do with the CD that the system created for me? Also, why does the system automatically start in Win7 instead of Lion. I need to pression the option key to have it start in OS X. I thought it was supposed to be the opposite.

Insert it while you are in Windows, if it does not autostart run setup.exe.
Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows)

How to install windows 7 on early 2008 macbook pro?

Similar Messages

Maybe you are looking for