How to install Windows 7 on Lenovo S300

Hi, I bought Lenovo s300, and it has come with Windows8. However I would like to install Windows 7.
I make bootable on USB, but I cant manage to boot up from it. What I should select in BIOS.
What is the best way to arrange partitions. I have SSD 24gb. Is it possible to install windows on SSD, and leave HDD as storage?

Hi Branko,
Ok First off
Check your BIOS by tapping F2 on startup Make sure under Configuration Tab the SATA Controller is set for RAID
Installation:
  Set your computer to Boot on your USB drive(Where your Windows 7 installer is and start the Set up as Normal)
- You will reach a point where it will ask you where to install your windows 7
 If it shows none "Like no HDD or SSD Being Detected" Then Download and extract this to a separate USB Drive(using another computer).then plug it in to your S300. Then on the Windows 7 installation click Browse, go to that USB drive and to the folder where you placed that downloaded file, Windows will identify it, make sure it is clicked and click Next.  Then all of your drives and respective partitions will appear.
           - Delete Partitions On your SSD and HDD
           - Create your Partition on the HDD and Install Windows on your HDD then continue and complete as Normal Installation and Reboot.
-You should have Windows 7 booting from your HDD from this point-
Download and install Rapid Storage from the link I provided Above.
Now Launch the Intel Rapid Storage Technology."  This can be found in your Start Menu under the Intel folder.  It should be automatically set up to accelerate your main drive.  You will also see it has identified your SSD as the proper size, 24GB (24GB).
If not, it is relatively easy to set up.  Choose the drive you want to accelerate, and the SSD you want to use as cache. 
then your done Caching the HDD to your SSD and make sure to install All driver from Support.lenovo.com.
Rapid Start this is optional if you want to set that up Just follow this method again and continue starting from the Rapidstart part.
 Hope this helps,
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • How to install windows like Lenovo do (U300e)

    It seems to me that Lenovo have installed windows on the C drive of my Lenovo U300e but also on the 32 GB SSD. So it is a sort of cached installation or something.
    The laptop boots of the SSD, but it is too small to do a windows install on so some of the windows files must be on the normal hard drive.
    My laptop crashed and I am trying to reinstall windows. I have managed to install it fine to the 2.5" hard drive and run it off there, but this is not taking advantage of the SSD, and I would like to set it up so that it boots of there, like it did when new.
    Any advice greatly appreciated.
    Phil

    It seems to me that Lenovo have installed windows on the C drive of my Lenovo U300e but also on the 32 GB SSD. So it is a sort of cached installation or something.
    The laptop boots of the SSD, but it is too small to do a windows install on so some of the windows files must be on the normal hard drive.
    My laptop crashed and I am trying to reinstall windows. I have managed to install it fine to the 2.5" hard drive and run it off there, but this is not taking advantage of the SSD, and I would like to set it up so that it boots of there, like it did when new.
    Any advice greatly appreciated.
    Phil

  • How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

    This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
    I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
    here. Maybe this helps other users.
    I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
    Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
    The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
    The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
    You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
    I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
    never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
    You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
    Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
    products.
    Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
    Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
    Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
    Open a command prompt. CD to the following directory:
    \Program Files\Common Files\Lenovo\BMGR
    On a german language system (like mine) it is
    \Programme\Gemeinsame Dateien\Lenovo\BMGR
    If you have an older IBM system the directory may be named
    \Program Files\Common Files\IBM\BMGR
    or something like that. Maybe you need to search around.
    In the following, I will call this the "BMGR dir".
    Enter the following command:
    bmgr32 /info /v
    You should get an output similar to this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 4   Checksum: 03    Passed
            MBR Sector 3 Index: 5   Checksum: FD    Passed
            MBR Sector 4 Index: 6   Checksum: 58    Passed
            MBR Sector 5 Index: 7   Checksum: 96    Passed
            MBR Sector 6 Index: 8   Checksum: 7F    Passed
            Data Sector  Index: 3   Checksum: F1    Passed
            Original MBR Index: 2   Checksum: BD    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
            Boot Config: 2 (Service Partition containing two Service OS's)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   239 255 255           63    301296177
     1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
     2   0x00   0x00      0   0   0     0   0   0            0            0
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
    partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
    for you.
    Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
    Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
    Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
    Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
    bmgr32 /info /v
    The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
    shows a smaller value.
    Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
    Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
    DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
    environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
    Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
    Continued in the second post...

    Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
    Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
    Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    Opened Master Boot Record to see whose MBR it is.
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
    Otherwise the following step will likely screw up you harddisk.
    Enter the following command (case sensitive?):
    bmgr32 /Fbootmgr.bin /m0 /IBM /v
    The output will look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
    installing MBR
    finding free sectors
    Sector 9 is free
    Sector 10 is free
    Sector 11 is free
    Sector 12 is free
    Sector 13 is free
    Sector 14 is free
    Sector 15 is free
    Sector 16 is free
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Setting Think bit
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
    Enter the following command:
    bmgr32 /info /v
    The output will now look like this:
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
    It's a Lenovo  MBR
    Opened Master Boot Record to see whose MBR it is.
    It's a Lenovo MBR
    Opened drive for reading
    Partition 0 the SP? no, type 0x07 is not correct
    Partition 1 the SP? no, type 0x07 is not correct
    Partition 2 the SP? (512)  Label is SERVICEV
    Using version 2.05 of Lenovo Boot Manager
    Reading: \\.\PHYSICALDRIVE0
            MBR Sector 1 Index: 1   Checksum: 00    Disabled
            MBR Sector 2 Index: 11  Checksum: 03    Passed
            MBR Sector 3 Index: 12  Checksum: FD    Passed
            MBR Sector 4 Index: 13  Checksum: 58    Passed
            MBR Sector 5 Index: 14  Checksum: 96    Passed
            MBR Sector 6 Index: 15  Checksum: 7F    Passed
            Data Sector  Index: 10  Checksum: 01    Passed
            Original MBR Index: 9   Checksum: 12    Passed
            No Patch Sectors
            Checksum Byte: 00
            Think Flag: 1
            WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
            Boot Config: 0 (Service Partition containing one Service OS)
            Boot State: 0                   Alt Boot Flag: 0
            (Normal booting operation, will boot to Customer OS)
            RRU: 00000000 00000000          Prev Active Part: 255
            Previous Partition Type: FF     Patch IN: 0     OUT: 0
            CIRT Disabled
            TOC: 0000000000000000           Lock: 0
            Show Error: 0                   Halt on Error: 0
            CIRT Load Return: 0
            CIRT Execute Return: 0
            Pause Duration: 10              Scan Code: 0085
            F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
            Check Msg: There has been a signature failure
     #  active  type      start CHS      end CHS      startLBA       size
     0   0x80   0x07      1   1   0   254 255 255           63    109675692
     1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
     2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
     3   0x00   0x00      0   0   0     0   0   0            0            0
    C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
    So you have actually regained the Lenovo bootmanager. But you are not done yet.
    Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
    Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
    Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

  • How to install windows 2000 on my g560 ?

    How to install windows 2000 on my g560 laptop?
    I am able to install winxp and upwards only.is there a way through bios setting or anything and secondly can u use winxp drivers for win2000?
    thanks everyone here for your time
    u can email me too:   *****
    Moderator note: member's email address removed to keep away from the spambots.

    Windows 2000 has been largely abandoned (and with VERY GOOD reason) why on earth would you want to install that outdated unstable OS?  It's plagued with security issues bugs and BSOD issues from being unsupported so long (even when it WAS supported) chances are no drivers were made compatable with that OS for your machine as XP is a totally different monster you likely would not find drivers for 70+% of your hardware.  I'd 110% advise against even trying it XP is the oldest supported windows OS anymore an even it is about to lose support very VERY soon (if it hasn't yet already).  I can't stress enough how much of a bad idea (and without any advantages by doing so) it would be to even attempt this.
    Lenovo 15.6,B575 W7 E-450,ATI6320,320GB,8GB DDR3 Ram-*Midnight*
    Dell Latitude D430,12.1 C2D 1.3 ULV,2GB DDR2,80gb SSD,Intel 950,XP *Mini Me*
    Dell Latitude D630,14.1,C2D2.0,W7,500GB,8GB DDR2,X3100*Old Faithful*
    Nvidia I shall Never forgive you for the 8000m Series.

  • How to install windows on the SSD (Y580)

    I have bought an Y580 recently wIth a 64GB SSD and 1TB HDD. I asked the salesperson upfront if the OS would be on the SSD. He said yes. Turns out that it is not. When i returned to them they told me it's a hybrid drive solution. And they have no idea how to install Windows on the SSD.
    I did some research and found out that Lenovo uses *Rapiddrive* to speed up programs. Hence why i can't see the SSD in WIndows as it is merged with the 1TB HDD.  In Disk management 2 disks show , 0 and 1 , but Windows asks to give disk 1 a MBR or GPT (this is apparantly due to the rapiddrive methode).
    My questions:
    * Is it possible to install Windows on the SSD and if so how can that be done without loosing the backup on the hidden partition of the 1TB disk? (so that OKR still works)
    * What are the benefits of Rapiddrive over using the SSD as bootdisk?

    Since it is a hybrid drive, it works a little bit differently; Lenovo's "Rapiddrive" is also different from other hybrids, and in the sake of making it "user friendly" and seen as a single disc they have probably nerfed some configurability for the intermediate/advanced users. However, Windows should already be installed on the SSD portion of the drive, this should be done automatically according to this press release:
    http://shop.lenovo.com/us/sitelets/ee/consumer-news
    "In the factory we will preload not just Windows 7 on the SSD, but also our Lenovo applications like OneKey™ Theater or OneKey™ Rescue System. The applications, operating system, drivers and other files are all fully-optimized for Enhanced Experience to make them load much faster. This, combined with their installation on the SSD will make the boot time to Windows desktop even faster. Some portion of the SSD will also be reserved as the Windows Paging File — this is used by Windows as 'virtual memory' additional to the normal RAM installed inside the computer. With the SSD acting as the Paging File, general Windows 7 performance will also benefit, especially when multitasking several applications.          
    The remaining space, which will typically be around 15GB on a 32GB SSD, will be empty, ready for the user to install their favorite applications and files."
    I have some of the fastest SSD's around installed on my desktops (SATA III), and while they are blazing fast, keep in mind the whole boot sequence still isn't going to be instantaneous even with an SSD (the biggest differennce you will notice is by the time Windows is loaded, it's fully loaded to the RAM, whereas a normal HDD you may see the desktop but your PC will still be cranking away with startup processes). If your startup is taking 30 seconds or less, maybe even a little longer, it's probably accessing the SSD just fine; if it's taking closer to 60 seconds, then yeah it may need to be reinstalled/reconfigured.
    As for reinstalling, sorry I won't really be able to help, hopefully someone else can come along; I personally have never used OKR anyways, and aside from doing a ghost backup I wouldn't say for sure that OKR would be salvageable with a fresh install. And because the Rapiddrive is its own technology, half SATA half PCI-E, I also couldn't tell you if it's even possible to fully seperate the two and keep them as distinct drives.

  • How to install Windows 8.1 Pro on Macbook Pro

    Hello everyone,
         I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
    After finishing the downloading process, I received this file which is about 4GB large.
    When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
    At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

    You need a 'Full' Installer.
    From Boot Camp 5.1: Frequently asked questions - Apple Support
    Which versions of Windows work with Boot Camp 5.1?
    Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
    Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
    It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

  • How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

    how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
    Iam new to coding. please help me.

    try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

  • How to install Windows 7 on a MacBook Air?

    Hi everybody,
    I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
    I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
    I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
    I have tried to run bootcamp and follow the instructions, but to now end.
    on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
    when i start boot camp on my iMac, this option will be greyed out.
    Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
    does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
    Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
    thanks!

    30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
    http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
    There is a program to create DVD from ISO or .exe
    Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
    Disk Utility is not a good method for burning Windows DVDs.
    http://simplyburns.en.softonic.com/mac
    https://discussions.apple.com/thread/3241150

  • How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

    How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
    I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
    I try many time, but after restart bootcamp partition, apple show blinking folder error
    I think this firmware not support to install windows by usb
    NOTE:
    I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
    If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC  ? 

    I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
    But- are you trying to reboot with both the USB install and the DVD install both plugged in?  that would definitely cause confusion.
    Do this, reboot with NOTHING plugged in.  Once you hear the Mac chime, immediately press and hold option.
    You should only see the Mac HD, and Recovery Partition.
    THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows.  If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing.  I had to do it this way on my mid 09 MBP.
    Let me know if this works to start the install.  If not we may have to start over with Bootcamp Assistant

  • I have Macbook Pro 13" mid 20012. How to install Windows 8 onto the mac using DVD? 10.8.3

    the title says it all.
    i have windows 8 DVD and i would like to have a clear instructions on how to install windows 8. I dont understand the need for USB

    Welcome to the Apple Support Communities
    You need a USB drive to install the Windows support software. It contains all the drivers that your MacBook Pro needs, and you will have to install them after finishing the Windows installation. If you don't install them, a lot of things won't work: the wireless card, the sound card, the brightness, the trackpad gestures... Apart from that, you don't need it for anything else.
    Apple has released the official steps to install Windows 8 on a Mac, so if you want, print this PDF > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

  • How to install Windows 8 on Macbook pro with retina display ?

    Hi - How to install Windows 8 on Macbook pro with retina display ?
    I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
    I am not interested to install it through Parallels or Fusion. Plz guide.
    Thanks !

    OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
    Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

  • How to install Windows 8 on Macbook Pro w/ Retina Display?

    Hi,
    I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
    Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
    Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
    I will be very thankful. Please help!
    Thanks

    Hi Mende1,
    Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
    Well, The Guide is simple but there are few questions which I'm not able to understop still.
    1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
    2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
    Thanks

  • How to install Windows 8.1 without optical drive

    I just got a ZBook 14 which was preinstalled with Windows 7. I want to use Windows 8.1 Pro which was alsp delivered on DVDs in the packages. However, this machine does not come with an optical drive. How can I install Windows 8.1 on this machine?
    Thanks

    Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and  any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive.  I suggest you do not give advice unless you know what you are talking about.
    For all others thatwant to the same thing.
    1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
    2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
    3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
    Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

  • How to install windows 8.1 in macbookpro

    how to install windows 8.1 in macbookpro
    im using MacbookPro version 10.8.3

    You can install Windows using Boot Camp Assistant, instructions located here: http://www.apple.com/support/bootcamp/
    Or, you can install Windows using a virtual machine like Parallels, Fusion, or VirtualBox. Instructions located on their respective sites.

  • How to install windows 7 on Mac OS 10.9

    Hi, all, I recently purchased a Macbook pro 13 with Retina display, it has MacOS 10.9 on board, but I have some work need be done on Windows, so I have to install Windows7, meaning that I will have a dual boot on my Macbook. I did a bit research on how to do that, but either the apple support has article about installing Windows 7 using boot camp, or the community has a unified answer for that. So I wonder how to install Windows 7 on MacOS 10.9, any help is welcome.
    cheers

    I use Oracle's free VirtualBox with Windows 7 Home Premium. As you might infer from the name, it is a virtualization solution and does not involve storage partitioning as will Boot Camp. It is responsive whether on an older Core 2 Duo with regular drive, or a Core i5 with underlying SSD. A Haswell and SSD solution would make it sing.
    I use two large monitors and you can tell VirtualBox to always launch the Windows guest on the second monitor.
    Whether you use a virtualization solution or Boot Camp for true dual-boot will depend on what you plan to do with Windows.

  • How to install windows phone 8.1 in other mobile phones(Android mobile phones or other)?

    Can i install windows phone 8.1 in other mobile phones(Android mobile phones or other)?

    Csound1 wrote:
    Either you will do this correctly or you will not.
    You can not have a storage partition in addition to Mac OS and Boot Camp.
    I can't help at all if you want to go your own way.
    Good luck, backup before you lose data.
    Ok, thanks
    I want to check this tutorial http://www.intowindows.com/how-to-install-windows-8-1-on-mac-without-boot-camp/ It´s about install Windows 8 without bootcamp.
    I tell us

Maybe you are looking for

  • Please help me with the iOS6 update for iPhone4!

    My iPhone4 says to connect to iTunes after my update, but when i do my computer says: iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I would recover it, but the computer with all of it'

  • HTTP Error 500.19

    Week later, still trying to publish. Ain't nobody got time for this. Did Lightswitch fail to edit the web.config? Shouldn't the deploy have re-written _IntrinsicData to local\SQLEXPRESS? The first image is from IIS7 trying to open the Configuration e

  • Item Creation error in R12

    Hi All, When creating an item, the following Note comes up when entering the @Purchased Item template. In the current Oracle, this does not happen unless the creation was saved before entering the template. Message is: The following attributes of the

  • BS014 error message when trying to settle a WBS

    When I try to settle WBS element - WDC-1-01-11, I get an error message BS014 -  "Diagnosis - For object  wbs WDD-3-02 user status XX according to this status settlement is not allowed. Procedure- you can only carry out the requested function, if this

  • Default Link Behavior

    Greetings all, I'm building a shared library that uses some STL code. All objects are built -KPIC, and the link is being done by CC. We're not building compat, and the lib is built to be dlopen'd by an application later. This occurs on Solaris 2.6, a