How to install Windows 8.1 on Haswell Mac?
Just bought the 15" Haswell Macbook Pro Retina and I'm trying to install Windows 8.1. I'm relatively new to Mac so the instructions that I found didn't really make sense to me and seemed like they were skipping steps. My school gave me the downloadable Windows 8.1 for Mac Version that says it has to be used with an external USB. Here's the steps I've followed leading up to my problem in the best way I can explain them.
1. Downloaded this file: English_windows_8_1_professional_upgrade_w64
2. Plugged in 8gb flash drive
3. Started boot camp assistant
4. Clicked 'Create a Windows 7 or later version install disk'
5. Chose this for ISO img: /Users/.../Documents/English_windows_8_1_professional_upgrade_w64/English_windo ws_8_1_professional_upgrade_w64.img
6. Says it's formatting drive
7. Prompted with this: Your bootable USB drive could not be created
Any insight on what's going on? I have a feeling it's because it's an upgrade? But what does that have to do with the USB drive? I've used 3 different flash drives and get the same message every time.
Also, I did do all the updates on the computer immediately upon opening it. Talked to some tech people and they said the update made it so that you don't need windows 7 first? I don't know...
After 3 hours I've successfully installed windows 8.1. Everything seems to be working fine but I'm too tired to try running any programs on it yet. I basically ran into most of the problems that I read about on the forums. Here's what I did since running into the problem listed.
One thing to take note of that I noticed a lot of people did because I've seen it in some install guides was to use two separate USB drives. One for the drive files and one for the ISO. I DID NOT follow those directions. I noticed many people had some sort of blank screen if they did or something like that so I'm assuming what I did bypassed that problem. So put everything on one USB. Mine was an 8gb toshiba nothing special.
8. After getting that prompt I logged out (making sure to uncheck the option to open any applications back up)
9. Logged in and restarted boot camp.
10. Let the program do it's thing clicking continue etc along the way.
11. As the computer restarts hold the Option key.
12. Now here's where things messed up for me again. I went to the windows boot and continued through putting in the key etc. when asked to choose which partition all of them were GPT servers. Honestly I have no idea what that means. I tried formatting as the option was highlighted but still didn't work.
13. Restart the computer, again holding the option key. This time load the EFI drive.
14. Resolution was different and everything was tiny but it's all the same thing that was just done before. When prompted for the partition I chose 4* or bootcamp and then everything installed successfully.
That's all I can think of so far instructions wise and hopefully this works for others who haven't found any solutions! I'm not super techy just did a lot of trial and error and determination.
Similar Messages
-
How to install Windows XP in parallel with Mac OS on a Macbook?
Can anyone tell me how to install Windows XP in parallel with Mac OS on a Macbook?
If I divide the hard drive into 2 patritions and install Win XP & Mac OS on each patrition, is it ok?I don't think he meant "Parallels", I think he just meant "parallel", with a little 'p'.
There are three options for running Windows software on an Intel-based Mac:
Virtualization: you can install software such as Parallels or VMWare (along with a licensed copy of Windows) which will emulate the environment necessary to run Windows software. Performance is significantly degraded, but you can work with both Windows and Mac software simultaneously.
Dual boot: You can use Apple's Bootcamp to partition your drive and create a CD of Windows drivers for your devices, so that you can then install Windows on one partition of your drive. Your Windows software will run just as it does on any other Windows PC, but you have to reboot to switch between Windows and OS X.
Crossover: Crossover is a product that allows you to run Windows programs in OS X without installing Windows. Not all Windows software will work with Crossover though. -
How to install Windows 8.1 on Haswell MBP
How do you get Windows 8.1 to do a clean install on a Haswell based rMBP?
The simplest answer to this problem is to manually install Windows using Microsoft tools. I have a brand-new MBPr, 15", 512gb flash, 16gb, with the nVidia discrete graphics, running Mac OS X 10.9 (build
13A3017). Here's what I did (you'll need two USB flash drives for this procedure):
1) Obtain the Windows 8.1 ISO from MSDN or other source;
2) Obtain the free Microsoft Windows 7 USB tool: http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool
NOTE: Although it indicates Windows 7, it works with any version of Win7 or Win8, including Win8.1. Follow the instructions to create your Windows 8.1 bootable USB drive.
3) In Mac OS X, run the boot camp assistant to create the USB flash installation drive per normal, including partitioning the disk for Boot Camp, etc. Just go through the motions as if you're going to install via Boot Camp, including downloading the Windows Support files.
4) When done with that, the Mac will reboot in order to start the Boot Camp installation... you will need to swap out the USB drives at this point, removing the Boot Camp USB and inserting the "Win7 USB"-created boot drive. Don't worry if you miss the boot cycle, you can just reboot holding the option key and be sure to select the Windows boot device (orange).
5) Now the Windows installation will begin using Microsoft Windows instead of Boot Camp method, and complete normally using the partition you created in Step 3. Several reboots later (be sure to hold option every time it reboots so you can select the new Windows boot device (not the orange one anymore) you will have Windows installed.
6) Go through the motions creating your Windows account, etc, and when you get to the desktop, insert the Boot Camp USB and navigate to the BootCamp folder. Here are the setup files with drivers, etc. Just click "setup.exe" to run your BootCamp support installation.
7) Done. -
How to Install Windows 8 on (some) unsupported Macs
Open finder
Open Applications folder
Open Utilities folder
Right click on Boot Camp Assisstant > Get info
Click the Lock in the bottom right corner and enter Admin password
Click the plus in the left corner and add your user.
Give yourself Read & Write privleges
Click the lock again
Right click on Boot Camp Assisstant > Show package contents
Open Contents folder
Open Info.plist
Scroll to the bottom where the <key>Win7OnlyModels</key> string is
delete the whole string (in my case <string>MacBookPro5,5</string>)
You will be promted that your don't have permission and to make a duplicate. Click Duplicate.
Backspace out the space between the lines if there is any.
Save as Info.plist to the Desktop.
Find the Finder window with the Contents page in it.
Change the name of the Info.plist to Info.plist.bak. It will automatically add .plist to it
Drag the Info.plist file from the Desktop the Contents folder.
Authenticate yourself
Let the file be moved.
Click back twice.
Open Boot Camp Assisstant
Click next.
Install Windows 7 or later version is now shown.
There you go. Windows 8 on unsupported Macs in 25 steps, or a couple minutes. (not including partition or install ;P)
If you don't know what your Model number is, Click the Apple in the upper right corner, About This Mac > More Info... > System Report... > and it will show Model Identifier. That is the <string> that your will need to delete. If you don't see it chances are your won't be able to do this. Could try this other "Trick" in here: https://discussions.apple.com/thread/4897066?start=0&tstart=0"If you don't see it chances are your won't be able to do this."
WRONG! YOU WILL BE ABLE TO DO THIS THANKS TO ME! FIRST FOLLOW ALL OF "aplet's" steps and then do this:
<key>PreUSBBootSupportedModels</key>
<array>
<string>MacBook7,1</string>
<string>MacBookAir3,2</string>
<string>MacBookPro8,3</string>
<string>MacPro5,1</string>
<string>Macmini4,1</string>
<string>iMac12,2</string>
Click the Apple in the upper right corner, About This Mac > More Info... > System Report... > and it will show Model Identifier.
Change it by deleting "Pre" and adding your Model's <string>
For example I ended up with this:
<key>USBBootSupportedModels</key>
<array>
<string>MacBook6,1</string>
<string>MacBook7,1</string>
<string>MacBookAir3,2</string>
<string>MacBookPro8,3</string>
<string>MacPro5,1</string>
<string>Macmini4,1</string>
<string>iMac12,2</string>
Then finish it off by following "Giuseppe Cantarella's" Steps!
AND THAT'S IT! YOU'RE WELCOME!!!!!
P.S. THANKS TO "aplet" for giving me guidance on the first steps and inspiring my edit, and "Giuseppe Cantarella" for finishing off the whole process!!!! -
How to install Windows 7 on 3 new Macs?
Hi.
I have three Macs I want to install Windows 7 Home Premium on. Never had Windows install on any of these Macs. This will be the first time. Which Windows 7 do I purchase?
1. Home Premium Family Pack Upgrade
2. Home Premium single use
The reason why I ask is...Isn't single use Windows 7 only allow one computer installation? However, if I get the Upgrade, then I have licenses for 3 computers, but I have to have a previous version of Windows installed for it to work...no? I'm so confused!
Z.Robert has some ideas that truthfully, don't know where he got them.
You can upgrade the upgrade (reinstall twice) but that is stretching the limits of law. But it will activate and no, you don't have to worry about using one computer at a time.
You could buy 3 copies of System Builder @ $99 each (Newegg, Amazon, etc) in either 32 or 64-bit. Can be reinstalled on same machine but not moved to a new machine or motherboard.
There is 3-pack Windows 7 64-bit Home Premium which is what I would go with and use that on all three, as found here:
http://www.amazon.com/Windows-Home-Premium-System-Builder/dp/B002NGJO7E/
I had numerous copies of Vista, one had a free upgrade, but I used Windows 7 RC and Beta for a year and Vista was too much trouble to install. In the end, way to activate an upgrade: just install over itself again. Works fine. I've got three computers with Windows, one had two versions, and more licenses than I need or use - so I don't have any qualm, I've more than paid my dues.
I would only buy retail if you may plan to get a new Mac and reinstall again. System Builder version are what a lot of builders and users purchase.
There are some disadvantages of the upgrade packs but handy for a family with multiple PCs already running Windows. -
How to install Windows Server 2012 on a Mac Mini
Well the title says it all. I am in a small apartment and am setting up my home network. I purchased a Mac Mini to run Apple OS X Server on and also make sure that I can pass the certification test for Apple. But I would also like to set up a Windows Domain Controller so that I can either:
Have a Mac Mini I can dual boot
- or -
Purchase a second Mac Mini and just put Windows Server 2012 on it.
Now you might ask why buy a mac and run windows. Well for one I need to get my MS certs up to date and for another, I am space constrained and the Mini is nice, small, and fits perfect where I would set it.
I have tried this following boot camp and some other guides. However, when I boot it never sees the attached USB or it never boots from the attached USB.
I have placed the Windows partition on the secondard disk drive as well, not the primary. Do not know if this makes a defference, from what I read it should not.
Thanks in Advance for any advise, guidance, or sections to read. Maybe Apple will officially support Windows 8 which should retroactively support 2012 before year end.Not really sure what to say except that it worked perfectly on my MacBook Pro. Like you, I need to update my Certs. I have a working SQL Server wherever I go w/o need to buy another laptop. I installed from DVD.
good luck.
Windows Server 2012 -
How to install Windows 8.1 Pro on Macbook Pro
Hello everyone,
I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
After finishing the downloading process, I received this file which is about 4GB large.
When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.You need a 'Full' Installer.
From Boot Camp 5.1: Frequently asked questions - Apple Support
Which versions of Windows work with Boot Camp 5.1?
Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows. -
How to install windows 7 on Mac OS 10.9
Hi, all, I recently purchased a Macbook pro 13 with Retina display, it has MacOS 10.9 on board, but I have some work need be done on Windows, so I have to install Windows7, meaning that I will have a dual boot on my Macbook. I did a bit research on how to do that, but either the apple support has article about installing Windows 7 using boot camp, or the community has a unified answer for that. So I wonder how to install Windows 7 on MacOS 10.9, any help is welcome.
cheersI use Oracle's free VirtualBox with Windows 7 Home Premium. As you might infer from the name, it is a virtualization solution and does not involve storage partitioning as will Boot Camp. It is responsive whether on an older Core 2 Duo with regular drive, or a Core i5 with underlying SSD. A Haswell and SSD solution would make it sing.
I use two large monitors and you can tell VirtualBox to always launch the Windows guest on the second monitor.
Whether you use a virtualization solution or Boot Camp for true dual-boot will depend on what you plan to do with Windows. -
I have a 2010 Mac Mini server running 10.8.4 (12E55). I just bought a brand new copy of Windows 8 from micrsoft. I have tried using boot camp and it will not recognize a burned DVD in my remote optical drive on my laptop running windows 7 or my macbook running Lion 10.7.5. I have had Microsoft on both of my computers remoted in for about 8 hours and they tried just about everything that I've tried.
Microsofts tech support has made me a bootable DVD and a bootable Flash Drive through remote desktop (awsome good job microsoft tech support). I have even tried formatting my mac mini's second 500GB hard drive to FAT32 using this whole disc as my windows partition. I know that when I go to install windows 8 it is going to reformat the drive to NTFS but all the articles that I've found, say this is what you have to do to get the drive formatted properly to get the ball rolling and get windows will fix it when it goes to install by reformatting to NTFS.
Ok so right now I have my second 500GB hdd on my mac mini formatted to FAT32 and I have tried to reboot holding my option key like I do on my mac book. If I want to boot to a different hdd on my macbook all I do is hold the OPTION key during start up and you get prompted to choose one of the bootable disc that is on your computer. Well if I put my USB drive which is bootable on my macbook into my macbook and do this right now its not showing up.
Now I just put the DVD that they made me in my macbook and it shows up as bootable disc. But the USB doesn't. (1 hour later) I just got microsft to remake the USB drive and am going to try that again so ta ta for now and I'll come back on to post to tell you if it works.mikkel-kj wrote:
These apps paralells and fusion and virtualbox, are they in Mac App Store? And when I have the app installed what then, now it ain't only bootcamp what shall I do now to install windows 8?
Mikkel
Parallels, Fusion, and VirtualBox are available from their respective sites. Read their installation instructions which explain how to install Windows. -
How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)
This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 4 Checksum: 03 Passed
MBR Sector 3 Index: 5 Checksum: FD Passed
MBR Sector 4 Index: 6 Checksum: 58 Passed
MBR Sector 5 Index: 7 Checksum: 96 Passed
MBR Sector 6 Index: 8 Checksum: 7F Passed
Data Sector Index: 3 Checksum: F1 Passed
Original MBR Index: 2 Checksum: BD Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 1 Alt Boot Partition (0-3): 1
Boot Config: 2 (Service Partition containing two Service OS's)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 239 255 255 63 301296177
1 0x00 0x12 0 193 255 239 255 255 301296240 11279520
2 0x00 0x00 0 0 0 0 0 0 0 0
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 11 Checksum: 03 Passed
MBR Sector 3 Index: 12 Checksum: FD Passed
MBR Sector 4 Index: 13 Checksum: 58 Passed
MBR Sector 5 Index: 14 Checksum: 96 Passed
MBR Sector 6 Index: 15 Checksum: 7F Passed
Data Sector Index: 10 Checksum: 01 Passed
Original MBR Index: 9 Checksum: 12 Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 2 Alt Boot Partition (0-3): 2
Boot Config: 0 (Service Partition containing one Service OS)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done! -
how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0 -
How to install Windows 7 on a MacBook Air?
Hi everybody,
I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
I have tried to run bootcamp and follow the instructions, but to now end.
on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
when i start boot camp on my iMac, this option will be greyed out.
Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
thanks!30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
There is a program to create DVD from ISO or .exe
Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
Disk Utility is not a good method for burning Windows DVDs.
http://simplyburns.en.softonic.com/mac
https://discussions.apple.com/thread/3241150 -
How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo
How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant -
I have Macbook Pro 13" mid 20012. How to install Windows 8 onto the mac using DVD? 10.8.3
the title says it all.
i have windows 8 DVD and i would like to have a clear instructions on how to install windows 8. I dont understand the need for USBWelcome to the Apple Support Communities
You need a USB drive to install the Windows support software. It contains all the drivers that your MacBook Pro needs, and you will have to install them after finishing the Windows installation. If you don't install them, a lot of things won't work: the wireless card, the sound card, the brightness, the trackpad gestures... Apart from that, you don't need it for anything else.
Apple has released the official steps to install Windows 8 on a Mac, so if you want, print this PDF > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf -
How to install Windows 8 on Macbook pro with retina display ?
Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp
Maybe you are looking for
-
When trying to update apps it keeps telling me my account cannot be verified. How do I fix this?
When trying to update my apps it keeps telling me it cannot verify my address! How do I fix this?
-
I just got my first Apple Computer (IMac) and am surprised to find out that the Text on the internet does not fill up the screen. I have asked the help desk how to make it bigger and they suggested command +. Unfortunately, that makes the words bigge
-
Brand: Apple Screen Size: 13" Memory: 2 GB Processor Type: Intel Core 2 Duo Processor Speed: 2 GHz Hard Drive Capacity: 500 GB Operating System: Mac OS 10.7.4 Lion Product Family: MacBook BootCamp: Windows 7 Ultima
-
Change Dynamic Prompt connection
Hello, We migrated our Crystal Reports 12.2.0.290 reports (Off SAP ECC) from dev to QA environment. After changing the datasource connection to point to QA infosets, when we refresh the report the prompt LOV still points to Dev. We know this as befor
-
Hello , Can anybody send me the link from where i can download J2EE engine...... Plz...........