How to Install Windows 8.1 Pro with Bootcamp

I have an early 2011 MBP 15" that's running Mavericks, and I just got Windows 8.1 Pro with an install disc. I'd like to install W8 with Bootcamp, but I can't seem to find any guides on doing this, as most people have retina MBPs which have no optical drive (bad design choice, IMO), so they utilize a flash drive. How would I go about doing this properly?

Welcome to Apple Support Communities
With a disc it's much easier to install Windows 8.1 on your MacBook, because the steps are the same as for any other Windows version.
Boot Camp Assistant (in /Applications/Utilities) will guide you through the first steps. Then, follow Apple's steps to install Windows 8.1 > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Similar Messages

  • How to install Windows XP in parallel with Mac OS on a Macbook?

    Can anyone tell me how to install Windows XP in parallel with Mac OS on a Macbook?
    If I divide the hard drive into 2 patritions and install Win XP & Mac OS on each patrition, is it ok?

    I don't think he meant "Parallels", I think he just meant "parallel", with a little 'p'.
    There are three options for running Windows software on an Intel-based Mac:
    Virtualization: you can install software such as Parallels or VMWare (along with a licensed copy of Windows) which will emulate the environment necessary to run Windows software. Performance is significantly degraded, but you can work with both Windows and Mac software simultaneously.
    Dual boot: You can use Apple's Bootcamp to partition your drive and create a CD of Windows drivers for your devices, so that you can then install Windows on one partition of your drive. Your Windows software will run just as it does on any other Windows PC, but you have to reboot to switch between Windows and OS X.
    Crossover: Crossover is a product that allows you to run Windows programs in OS X without installing Windows. Not all Windows software will work with Crossover though.

  • How to install Windows 8.1 Pro on Macbook Pro

    Hello everyone,
         I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
    After finishing the downloading process, I received this file which is about 4GB large.
    When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
    At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.

    You need a 'Full' Installer.
    From Boot Camp 5.1: Frequently asked questions - Apple Support
    Which versions of Windows work with Boot Camp 5.1?
    Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
    Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
    It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows.

  • I had tried installing windows 8.1 pro with many different solutions like using Bootcamp or using gdisk part and upgrading the disk part from hybrid to EFI also tried Using Lenevo external Optical drive which doesnt worked my internal drive is damage

    I Am fed up after getting error after errors on the installation of windows 8.1 in my late 2011 MBP 15" 750 GB HDD and OSX Yosemite 10.10.2 and i am trying to install windows 8 or 7 and the error doent go away also i tried various other methods like gdisk part to make next button appear and Afte next button appear i am getting the error after the check list is done
    please someone help me out i am getting paranoid in this and i am going to be a threat to society because its making me insane.

    1. You cannot use the Lenovo external drive, because you already have a built-in SuperDrive. Get your internal drive fixed.
    2. Your Mac does not support EFI Boot, because it is a PreUEFI model based on How to identify MacBook Pro models - Apple Support and the following list. If you force it with EFI boot, some of your hardware GPU/Audio will not work properly.

  • How to install window 8.1 pro on g500

    Hello,
    I currently have the g500 lenovo computer with the preloaded software windows 8.1. I would like to purchase the windows 8.1 pro version and would like to know what are the steps needed to do this and if anyone has done this what type of problems if any have you encounter.
    Thanks

    hi fishermanjack,
    The easiest way to upgrade Windows 8.1 to Windows 8.1 Pro is by adding features. To do this, you will need a Windows 8.1 Pro Pack license. This is ideal if you wanna keep the OneKey Recovery function and other proprietary lenovo softwares.
    I haven't tried this upgrade yet on the G500 but on a Ideapad Flex15 gave no drawbacks (drivers / softwares are compatible). If you have already added some important files, ensure that you have them backed-up first before doing the upgrade.
    See the following for more info:
    How to add features with Windows 8.1
    Add features to Windows 8.1: FAQ
    Edit"
    Fixed the link for Windows 8.1 Pro Pack
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Can I install Windows 7 upgrade version with Bootcamp on my MAC Book Pro?

    I currently don't have Windows on my Mac book Pro.  I am trying to avoid the high cost of the full version.   My friend said they knew someone who was able to use the upgradable version to install it on their PC using bootcamp.
    Also is Parallell really worth the extra cost?  I will be primary working on my OS OPsystem and only need windows for a few specific things.

    Csound1 wrote:
    Have you actually tried to install an upgrade version of Windows 7 without a previous version of Windows installed ?
    FYI: Google "Windows 7 upgrade double install".  This was primarily to do clean installs of Windows Vista using the upgrade product keys, but it still works with Windows 7.  I use this technique for cases where the owner upgraded to Win7, but didn't make the recovery disks of XP when they originally got the computer (and the computer didn't come with recovery disks,) then the HD fails and so we have to install Windows 7 from scratch to a new HD using the upgrade product keys without any previous copy of Windows.

  • I have a MacBook Pro 2006 and installed Windows 7 on it with BootCamp no problem, but the thing is on Windows, there is no sound.

    Hello there everybody! I have installed Windows 7 on my MacBook Pro 2006 15' without any problems, and without any modification. I did hear that some users couldn't install it, but I have got it working fine with BootCamp 4.0.1 on Lion. So anyways, when I boot into Windows, there is no soudn, and there is also a Red Light coming from the Earphone/Headphone jack.
    What should I do? This problem is really ticking me off because I only insalled Windows to lay some games my friend recommended to me. With no sound, it would be really strange playing them, especially Mass Effect.

    Well I / we always kind of assume that someone did all the normal basics first and is still having trouble. And read the instructions in Boot Camp Assistant.
    For reference purpose to anyone
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Boot Camp 4.0, OS X Lion: Frequently asked question  http://support.apple.com/kb/HT4818  http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    https://support.apple.com/kb/HT4569
    Installation Guide  
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ  Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ  Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/

  • How to install Windows 7 on MacBook with Tiger + Leopard upgrade using Boot Camp

    Hi,
    I've had Vista installed on a separate partition on my MacBook for a while, but wanted to upgrade to Windows 7. I've completely wiped the HDD, re-installed Tiger, upgraded to Leopard and installed Windows 7 using boot camp from within OSX. However, I now can't boot back into OSX - I believe it's because I don't have the latest version of Boot Camp within Windows 7 (it doesn't appear on the task bar), but I also don't have a full copy of Leopard, only the upgrade disk.
    Is there any way to (a) boot back into OSX (I've tried holding down the option key and this doesn't work) and (b) installing a version of Boot Camp that will enable me to switch between both operating systems as I was when Vista was installed & without having to purchase the full copy of Leopard?
    Any assistance would be much appreciated.
    Many thanks,
    Elliot.

    Try to boot from the 10.4 disk then and "Repair Disk". If you can, then try booting from the 10.5 disk and do the same.
    Have you tried holding down the C key also when trying to boot from the Install disks? It could take 30 seconds to a minute or more for the C key/Option key reboots. The Mac DVD HAS to be the OS installer disk not the applications installer, etc,. Sorry if I keep bringing this up.
    You have to keep holding it down the whole time it boots, either it will bypass it and reboot into Windows or it should get to the boot loader window with at least Windows showing up.
    If you can still boot into Windows with no problems then Windows SHOULD show up in the boot loader window. (C key/Option key) It's hardware related, it's the computers manual way of looking for a bootable OS if there's no OS installed yet.
    Don't forget to disconnect any USB devices until you get it fixed.
    Also try to boot from the Windows  installer disk and "Repair Windows" and see what happens.
    Other then your DVD drive may be on it's last legs, I can't really think of any reason you can't boot from the Mac DVD's.  All the other post's I searched for eventually got the DVD boot working, even 10.6 and 10.7 are having that issue, tho rarely.
    elliotfromnewark wrote:
    Hi, ...........inserting the Leopard disk once in Windows to install boot camp and it says that the version on the DVD is only compatible with XP SP2 or Vista.................
    Don't run the installer this time, if a window pops up to "Run" or "Open",  just open it. If it doesn't open the DVD and look for the BootCamp.exe. Right click on the .exe (or whatever it's called) and select the trouble shoot compatibility mode and select Vista. Yes, I know you have W7. See if that works.
    It may have buggered the Mac OS side so you may have to get DiskWarrior (worked for some) or the like in order to fix it. It would definitely be useful in the future.

  • How to install Windows 7 on E20 with only DOS and no DVD/floppy driver?

    I am considering buying the cheapest E20 - with following configurations:
    ProcessorIntel Pentium G6950 Processor (2.80GHz 1066MHz 3MB) - 73W
    Operating system DOS (No Software Preloaded)
    Tower 4x5 Mechanical with Intel 3450 Motherboard
    1GB PC3-10600 1333 MHz DDR3 SDRAM DIMM
    Integrated Video
    No CD/DVD/floppy
    No monitor
    I tried to search the internet for instructions to install Windows 7. But there is not many discussion threads. Has anyone on this forum has had experience in doing that and wants to share.
    Thanks for your help.

    http://technet.microsoft.com/en-us/magazine/dd535816.aspx
    obviously you don't have cd drive, therefore you should follow the above instruction to install the windows 7 from a usb key.
    The integrated video card should have at least a vga output, which will work with your dell monitor, provided that monitor is working.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • How to install windows remote desktop services with Microsoft Remote desktop License

    Hi
    we have plane to install a server in our company, having windows server 2008 R2 - 64 bit. and also buy 10 RD cal.
    now how can install RD call after installing windows OS.
    kindly help will highly appreciate.
    Arvind

    Hi Arvind,
    On your server, using Server Manager, you need to install RD Session Host and RD Licensing Role Services at minimum.  After install you should set the licensing mode to match the type of RDS CALs you purchased as well as Specify the licensing server
    name (itself).  You may do this in RD Session Host Configuration (tsconfig.msc) or via group policy.
    Next in RD Licensing Manager you need to Activate your licensing server.  Before you can install your purchased 2012 RDS CALs you will need to contact the Clearinghouse and have them downgraded to 2008.  Please have your licensing number,
    authorization number, licensing paperwork/emails ready before you call them.
    Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
    http://technet.microsoft.com/en-us/library/cc754874.aspx
    Thanks.
    -TP

  • How to install windows on macbook pro me294 using downloaded drivers?

    Recently I bought a MBP and I'am going to install windows on it because of my job. I have a problem with bootcamp assistant: I have downloaded the bootcamp drivers but when I am creating the setup disk it automatically chooses to download the drivers again! What should I do?

    i have done this steps but when i boot the usb key it freezes in the first screen ( selecting languages ) ! but i believe it doesn't freezes, it is because it doesn't recognize my hardware. when i was installing win8 there were no problems like this!

  • Installing Windows on Macbook Pro, NO BOOTCAMP

    I have a 15 inch core 2 duo Macbook Pro and I went to restore my computer to tiger once again and when I did I relised that the disk is too scratched up, I can only get about 90 percent of the minimal installation done.
    After a while of trying diffrent things i got fet up and partitioned my hard drive to Master boot record and poped in my Win7 install disk, I installed Windows 7 perfectly with no problems but now when I go to boot it up all I get is a grey screen and after a while a folder icon pops up with a question mark on it.
    How can I fix this without using another mac or bootcamp, because I DON'T have access to one and i DON'T have access to another mac cd, so don't give me that option, lol.. The only thing I have access to is another windows 7 computer.
    Please help, I thought mac was suppose to be one of the top brand computers. especially with the price of them, but so far I've had more trouble with this mac than what I did with my HP, I had my HP 3 years now and my macbook not even a year.
    Thanks,

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the desired disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    Select the Windows disk icon and click on the arrow button.
    Where did you get the Windows installer from? Your HP? That's an OEM disc that cannot be used except on your HP. You need a retail Windows disc if you want to boot the Mac exclusively with Windows. Of course you will not have any of the hardware drivers for Windows for use on the Mac hardware.
    I don't understand your complaints about a computer you don't seem to know how to use, your installer discs are all scratched up and no longer usable, but you have had lots of trouble with it. And, all your doing is trying to use it as a Windows computer. Defies logic.

  • Can't install Lion on Macbook Pro with bootcamp.

    Basically I have a Macbook pro with 10.6.8 with windows installed on a partition called bootcamp.
    I try to install lion on Mac HD and it says This disk doesnt use the GUID partition table....Use disk utility....
    How ever when I select my internal hd in disk utility, 'options' is blanked out.
    Any ideas on how I get round this with out formting the whole hdd and backing up all of my windows and mac software.

    I am willing to try this, but I was kinda trying to find a solution that doesn't need me to unscrew stuff ..etc

  • How to install Windows XP using Snow Leopard Bootcamp

    Have a MacBook purchased Mar '11 that came with Snow Leopard and when attempting to run Bootcamp to create Windows partition receive msg that only Windows Vista or 7 are supported.
    Also have Macbook Pro Jun '08 and Macbook Apr '09 that have Windows XP partitions created with Leopard Bootcamp which Apple Genius Bar upgraded to Snow Leopard and the XP partitions still run with no problems.
    Why does Snow Leopard require Win Vista/7 for new Bootcamp partitions but supports Win XP on partitions that where created with Leopard?
    Is there a way to use Win XP with Snow Leopard as purchasing 4 Win 7, would never run Vista, is a VERY undesirable option.
    First time using this forum, but will do whatever I need to ensure answer(s) get points.
    Thanks for your help.

    Hi Bob.
    Your questions have simple answers. I hope you find them helpful.
    1. Yes, Windows XP will install on your MacBook Pro.
    2. Most games run properly on Windows 7 Home Premium. But if you're really a hardcore gamer, I suggest you get yourself a copy of Windows 7 ULTIMATE (It's a little expensive though).
    3. Home Premium costs around $120. Ultimate shoots up to $220. There is a Professional edition as well but that's not the type you want (It's particularly for business users, plus its $200). If your budget is restricted to $140, I suggest you go ahead with Home Premium. You can squeeze in a $20 software/game as well. I have been using it for quite some time on my MacBook Pro. It's great!
    Regards.
    Abhishek.

  • Installing windows on macbook pro without bootcamp. Will this allow for switchable graphics?

    Hi everyone, I was thinking of buying a new Macbook Pro Retina 15 Inch with the discrete nvidia graphics card inbuilt with it.
    I love windows and I am planning on running windows 7/8 on the macbook pro as my primary OS (because of advantages of gaming and being familarized with windows os), however I have heard the issue of running windows on bootcamp severally drains battery life as apple does not allow you to switch the nvidia graphics to the integrated graphics. Is this true? I have heard that running windows 7/8 on bootcamp allows for only around 3:30 hours of battery life, whilst OSX allows for 8+ since it uses the integrated graphics primarily when not running GPU demanding applications.
    I am wondering if you can install windows 7 without bootcamp which will wipe apple OS from the laptop completely. Will this allow for the laptop to do switable graphics without problems allowing the laptop to save much needed battery life?
    Thanks in advance.
    Michael

      Sorry it seems to have taken so long for you to get an answer on this question!
      Your last post was mostly right... It IS a bad idea to go that route!
      While it's technically POSSIBLE to get Windows in place without OSX, it's a MAJOR technical hassle and you need to jump through several hoops to get to that point.
      In addition to the hassle required, having an OSX partition can be incredibly useful at times - I've had my Windows system break several times in the past where the automated (and even manual) startup-repair process failed to get Windows booting again, but a short boot into OSX later, I have the problem resolved (via OSX) and am able to get back into Windows.
      Finally, you need to be aware that the graphics card situation isn't because of the presence of OSX. Just because you get rid of MacOS doesn't mean you suddenly will be able to use either graphics card! The limitation comes into play with the hardware drivers necessary to get all your hardware working in Windows - they just don't have the facility to switch graphics cards built into them.
      I'm afraid you're stuck with the NVidia card when using Windows, one way or another!
      Bootcamp is a prerequisite BTW. Without it you won't be able to get Windows installed at all (at least not without MAJOR stumbling block, again!), and again, the graphics card limitation isn't due to OSX or Bootcamp.
      Also, battery life... Yes. You'll have significantly less in Windows, and this isn't entirely because of the graphics card situation either. MacOS is just built so well, with the limited hardware used by Apple in mind, that power-management when using OSX os significantly better! The legendary battery life of Apple systems is actually primarily due to the operating system, not the batteries themselves!
      As a helpful indication: On my 2009 17" MBP I get about 7 hours on the integrated chip in OSX (8 is pusing it, but is possible sometimes); about 5 hours in OSX when using the NVidia; and about 3 and a half when I'm in Windows.
      Hope this all helps you. If you have any further questions feel free!
      Apologies for the scattered approach to answering your posts - it's LATE where I am and I"m kinda rushing through things... :-)

Maybe you are looking for