How to install Windows 8.1 without optical drive

I just got a ZBook 14 which was preinstalled with Windows 7. I want to use Windows 8.1 Pro which was alsp delivered on DVDs in the packages. However, this machine does not come with an optical drive. How can I install Windows 8.1 on this machine?
Thanks

Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and  any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive.  I suggest you do not give advice unless you know what you are talking about.
For all others thatwant to the same thing.
1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

Similar Messages

  • Install windows 8.1 without optical drive?

    Hello,
    Just bought windows 8.1 and i wanna bootcamp it. I have no optical drive on my mac. Where do i get an iso file on windows 8.1?

    Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and  any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive.  I suggest you do not give advice unless you know what you are talking about.
    For all others thatwant to the same thing.
    1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
    2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
    3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
    Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

  • How to install OS/reset password without optical drive?

    I was given a white G3 recently, 900 MHz 1 GB of RAM, pretty decent for as old as it is, only problem is that it doesn't have an optical drive. All of the user accounts have passwords and I can't use a disc to do a clean install or reset passwords. Any clue on how to do do anything without a disc? The closest thing I have to an external optical drive is an IDE drive with an IDE to USB adapter, but it doesn't recognize that on boot. I have an external hard drive if I can somehow mount an image on that. Any help would be appreciated. Thanks.

    How to share cd/dvd:
    http://reviews.cnet.com/8301-13727_7-10427176-263.html
    & on the computer with the cd/dvd:
    http://support.apple.com/kb/HT1777?viewlocale=en_US
    Change Password
    Mac OS X:
    Changing or resetting an account password via GUI:
    Resetting a user's password
    Resetting the original administrator account password
    http://docs.info.apple.com/article.html?artnum=106156
    You do not have a CD/DVD
    Changing password from single user mode:
    You can also change the administrator's password from single user mode or create a new administrator account.
    You need to get into single use mode for steps one and two that are listed below.
    This page will tell you how to get into single user mode.
    http://support.apple.com/kb/HT1492
    Basically, you hold down the command-s key then powering on your machine. The command key has a little apple symbol on the lower left. It is between the alt/option key and the space bar. On a PC keyboard, it will be the windows key, I think.
    1) You can change the password on an account. ( Do you know Unix. You are in a Unix single user console. ) The setup commands you need should be listed on the screen. For Mac OS 10.4.11, the commands are:
    # Type the follow two instructions to access the startup disk in read/write:
    /sbin/fsck -fy
    /sbin/mount -uw /
    # Start up some utility processes that are needed.
    sh /etc/rc
    # You will probably need to press the return key once the system stops typing.
    # To find out the users on the system type, use the list command. The l is a lower case L:
    ls /Users
    # One of these accounts will be the administrator.
    # Pick one of the users which I'll call a-user-name and type it in this command:
    passwd a-user-name
    # and enter the new user password. You need six characters.
    # You will need to enter your password twice. Your typing will not show up on the screen just
    # press enter when you complete the typing.
    # For cryptic information on these commands try:
    man ls
    man passwd
    The root account isn't enabled by default. I am not sure if changing the password on root will enable it.
    2) Get the Mac to set up an additional administrative account. You can then change the password on your old account.
    Start with your computer power off. Hold down command-s. Power on your computer.
    Type in the following:
    The first two commands will depend on your release of Mac OS X. Look at what is typed out in the console to determine the exact format.
    # Type the follow two instructions to access the startup disk in read/write. Press return after each command.
    /sbin/fsck -fy
    /sbin/mount -uw /
    cd /var/db
    pwd
    #List all files. The l is a lower case L.
    ls -a
    #The move command acts as a rename command in this format.
    mv -i .applesetupdone .applesetupdone.old
    reboot
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    Limnos adds detailed explainations:
    http://discussions.apple.com/message.jspa?messageID=8441597#8441597
    The above the idea came from a post by JoseAranda at September 9, 2006 3:48 AM
    http://www.askdavetaylor.com/howdo_i_reset_my_mac_os_x_admin_rootpassword.html
    You will need to scroll down to see this post. Search for applesetupdone
    Once you have a new administrative account, you can change the password of your old administrative account
    blue apple > System Preferences > Accounts
    • You can see that it is easy to change your administrator password. You can set a firmware password that you enter before your machine will boot.
    http://support.apple.com/kb/HT1352
    • For the best data security, you should use FileVault. Create a good logon password. Define and use a good backup plan. I do not recommend using FileVault unless you really need the security because it is much harder to recover your data should you have a hard drive problem and you do not have your data backed up.

  • Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

    Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

    Tell my wife that!
    This is the best I can do. This way you can use the 2011 MBA way to do things.
    Look for the post from @jacktourist. (on page 2 about half way down) This seems to be the easiest.
    There are a couple of more similar to this with pictures I've seen around but can't remember where.
    Here's another search with added info. It's easier then it sounds.

  • How to Install Windows 7 By Bootabel Pan Drive

    How to install windows 7 by usp pan drive  in macbook pro 13" 2011 early with mountain lion 10.8.2

    Wrong forum.
    Try here:
    https://discussions.apple.com/community/notebooks/macbook_pro?view=discussions

  • How do I install windows using BootCamp without cd drive fot the new MBP?

    I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
    New MBP doesnt seem to have a cd driver.
    How do I install windows using bootcamp without cd drivers?

    You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
    I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
    Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
    Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
    Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
    Put the thumbdrive in the macbook and boot holding down the option key.
    Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
    On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
    If you need super detailed instructions, CNET has some here:
    http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
    Tech-Recipes has some similar instructions here:
    http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
    If you have any issues after trying this, ping me and I may have solved them when I went through the same process.

  • How to install Windows on a SATA boot drive

    Here is how to install Windows XP on a SATA boot drive.  This procedure was first developed by syar2003 and has been used by many iusers ncluding myself.   Although it was originally developed for Neo2 mb's and Windows XP Pro, it has general applicability to systems as well.
    1.  Have only the SATA drive you want to be the boot drive active in your system.  Disconnect the power to all other HDD's if any.
    2.  Have only one optical drive active. Disconnect the power to the other opticals if any. (Best to have a burner optical as master on IDE1.)
    3.  Plug SATA drive into SATA 1 on the mb.  (it may show us as an IDE drive somewhere down the list in BIOS.  That's okl)
    4.  Enable appropriate SATA options in BIOS.  Set boot order to floppy, cd, SATA drive.  Set boot priority to SATA drive.
    5.  Partition and format the SATA HDD using the utilites CD that came with the SATA drive.  (If you don't have an HDD utilities disk, download one from the website of your HDD manufacturer.)
    6.  Run Windows  setup.  No need to load drivers at the F6 promt unless you are planning to do a RAID configuration.
    7.  Windows XP should install without incident.
    8.  After you are up and running, plug the power back into your other HDD and optical drives if any.
    If you have a board older than the K8 series, it may be necessary to load the SATA drivers at the F6 prompt.  If the above procedure does not work, than try it again loading the SATA drivers.
    If this procedure does not work for you, it is likely that your particular SATA HDD has some compatablity problem with Windows setup and/or your motherboard.  The solution to this is to try another SATA drive.  In general, most failures using this procedure have been traced to certain WD, Seagate and Hitachi SATA drivers of smaller capacities.  Fewer problems seem to have occured with Maxtor HDD's.

    Kaplan, from an earlier post of mine regarding sata2 hdds - I have them plugged into the sata1&2 ports, installed the nvidia raid first and then installed winxp (in both raid 0 and raid 1).  My bios is 3.1 and its a known problem that bios 3.3 & 3.4 have nvidia raid problems but seems to be fixed in the beta bios 3.53:
    I just purchased 2 hitachi deskstar sata2 80gb hdds ($60 each at zzf) and the interesting thing about them is that you have to "enable" sata2.  I have been testing the performance of sata1, sata2, raid1 and raid0 and the results are below.   
    The drives themselves are factory default set at sata1. Since I purchased OEM, no software or instructions were included.  I had to go to the hitachi website download section to download a dos based program (the features program) to enable sata2.  After enabling the hdds to sata2, they were recognized in winxp in the nforce ADMA controller device driver and the screen reads with the primary channel as Serial ATA Generation 2 - 3G...and all 4 boxes below it are checked (the boxes enable bios select xfer mode, enable read caching, enable write caching and enable command queuing are checked).  An interesting thing about the sata2 spec is that all sata2 hdds must come standard with NCQ...its not advertised on these 80 gb hdds on the hitachi website (unlike the larger hitachi sata2 hdds) but its a standard sata2 spec and these 80gb hitachi hdds are recoginized in winxp as sata2.
    The other interesting feature about the hitachi sata2 hdds is setting them up to operate in an adjustable "performance" to "silence" mode.  The hdds are default set at high perfromance but you can manually lower the performance to increase the silence of the hdds which is fully adjustable to your liking.  I tested the highest silence/lowest performance setting and you cannot hear the hard drive at all. 
    Testing - I tested the 2 hitachi sata2 deskstars with the first result in sata1 mode, the second in sata2 mode, the third in raid1 mode and the fourth in raid0 mode.
    First, a significant increase in raid0 over sata1, sata2 and raid1 with sequential reads and writes (PC Wizard).
    Write: 28mb/s vs 29mb/s vs 27mb/s vs 53mb/s
    Read: 45mb/s vs 46mb/s vs 43mb/s vs 83mb/s
    Second, significant increase in sata 2, raid 1 & raid 0 over sata1 with buffered reads and writes (PC Wizard).
    Write: 104mb/s vs 176mb/s vs 165mb/s vs 266mb/s
    Read: 123mb/s vs 200mb/s vs 200mb/s vs 293mb/s
    Third, significant increase in sata 2, raid 1 & raid 0 over sata1 with burst reads (HD Tach).
    Burst Read: 133mb/s vs 225mb/s vs 219mb/s vs 334 mb/s
    It is interesting to note that raid1 is better than sata1 but marginally slower in all tests over sata2.  Raid0 is significantly faster on all tests.   

  • How to install Windows 7 from a USB drive!

    This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
    The advice in the guide is also applicable to installing Vista.
    You need basically:
    a USB flash drive at least 4GB in size
    a Windows 7 DVD
    To sum up:
    Format your USB drive, with the NTFS filesystem
    Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
    Copy the contents of the Windows 7 DVD to the USB drive
    Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
    Full guide here:
    http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

    Quote from: bnborg on 16-February-11, 10:28:04
    I have done this and it is simple.
    I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart.  I chose quick format and a fat filesystem.  It doesn't need to be ntfs.  I had diskpart mark the partition active.  I copied the DVD contents to the flash drive.  I also made a folder on it for motherboard drivers.
    After that, I booted the drive on a new machine.  Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive.  I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash.  Windows installed without problems.
    Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install..

  • How to install Windows 7 on new hard drive?

    I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
    1. How do I install Windows 7 on new hard drive?
    2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
    by the way this is my laptop spec (for reference) ; -
    * Note *
    I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
    I hope somebody will help me answer my question,
    Thank You
    Solved!
    Go to Solution.

    I got the solution;
    Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
    Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
    or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

  • How to install Windows XP into a Flash Drive?

    I would like to install Windows XP into my flash drive. Not boot from the flash drive and install into my PC. I've searched extremely hard on the internet and found the other thing around and I tried what I could. Any suggestions? (Here's what I tried: Creating partition tables. Install using VMware. Using different formats.

    Thanks for the tips. I was able to install Windows XP and boot from the SATA drive by using these options and setting the appropriate boot device selections...
    Legacy Mode
    ATA Configuration - PATA only
    SATA Keep enabled - yes
    PATA Keep enabled - yes
    PATA channel selection - both
    Combined Mode Option - S-ATA 1st Channel
    S-ATA Ports Definition - P0 - 3rd./P1 - 4th.
    I just wasn't sure if I was really getting "SATA" performance, etc. without specific drivers.
    Thanks again.
    Bob (ll1951md)

  • How to install windows support software without mac OSX install cd?

    I want to install windows 7 on my macbook pro 10.6.8 via bootcamp. I have a windows 7 install cd and I havn't got past the stage of installing the windows support software. I lost my mac osx install cd a long time ago so I can't install the software that way, but if i try and download the support software from bootcamp, I keep getting a notification that the windows support software is unavailable. What should I do?

    Call Apple for replacement disks.  The Boot Camp drivers for OSX 10.6 and earlier were not available as a download.  Or upgrade to Lion, which you do download the Boot Camp 4 drivers.

  • How to install windows 7 Firefox without "Ask search" and other software?

    I would like to install pure Firefox, lean without getting other add-on software, such as "Ask search". I am requesting download from Mozilla home page. Thank you for helping.

    I've moved this over to the Firefox Support forum.
    You have two options.
    1) Uninstall Ask toolbar from the Add-ons page (Firefox menu button (top right hand corner) -> Add-ons or <i>Ctrl + Shift + A</i>
    2) Uninstall Firefox then re-install it from Mozilla directly
    *www.getfirefox.com
    Yahoo!, Ask, as well as other companies bundle their toolbars and other crap with Firefox so it's best to get it directly from Mozilla to avoid any "bloat-ware"

  • Installing Windows from an external optical drive?

    My superdrive recently died, and I replaced it with an external drive that's been able to read and burn everything I need it to without a problem, including using it to install Snow Leopard.
    I tried to use it to install Windows (Vista Home Premium, if that matters) with Boot Camp, but when it comes to starting the actual installation, the computer doesn't seem to see the drive at all. It will start up, with the chime and the grey startup screen, but that's as far as it gets. It will stay on that screen until I restart it and go back into the Mac partition by pressing option at startup.
    Is there a way to make it boot to the Windows disc in the external drive? Failing that, is there a way to use Boot Camp successfully with a non-disk source, like an external hard drive or flash drive with the Windows data on it? Any help will be greatly appreciated.

    The Hatter:
    Thanks for your reply. My purpose is temporary and to document the process of installing Windows in to a Boot Camp partition on a system that does not have an internal Optical drive.
    I did this succesfully using bits of information from three documents. I want to go through the process again, this time documenting my steps for the benefit of others and me in the future. You may or maynot know, installing Windows with Boot Camp without an INTERNAL optical drive is difficult and require a hack using Parallels, copying the VM MBR, etc.
    I should have documented it the first time but I doubted if it would work.
    So, I want a second BC partition, on my second internal drive without touching my working BC patrition on the SSD.
    Make more sense?
    Thanks,
    Kevin

  • How to install WinXP on SATA without floppy drive?

    Hi.
    Is it possible to install WinXP on PC (with SATA) without floppy drive?
    WinXP installer itself doesn't recognize SATA controller, so floppy disk with drivers is included.
    But my PC doesn't have any floppy drive (what a relic. none of new PCs should contain a floppy).
    How could I install WinXP on my PC? (without buying & mounting floppy drive).
    (maybe one of DVD drives, ethernet or flash drive could be used somehow)
    thanks.

    Quote from: brummie on 06-June-05, 19:22:57
    dear list,
    silly you cant download from the website really isnt it.
    cheers
    brummie
    You can download the article, but you need to do it from your web browser. File -> Save as.
    Quote from: Deathstalker on 06-June-05, 21:32:36
    Jeremy,
    If you are having to do that all the time, then there is something else wrong with your computing habbits.
    Richard
    I used to try out programs on my old laptop and some of them weren't as clean as I had hoped. So I used to reinstall windows on it all the time. Luckily windows had all the drivers for my laptop so I didn't have to slipstream the drivers, but I probably reinstalled windows every other week. I just figured it was better to try a program on a computer that I didn't rely on rather than my main rig.
    Have Fun
    Jeremy

  • TS4517 How to install windows in mac without a CD Drive

    So i got an iMac but it has no cd drive at the side iMac and i can't get my windows installed using the CD i bought anyone has any clue to what i should do?

    Start Boot Camp Assistant and follow the instructions in the installation guide, or, follow the instructions for your computer here http://www.apple.com/support/bootcamp/

Maybe you are looking for

  • What went wrong ?

    Dear all, I`m trying to figure out what went wrong with my database. During the higher load the users were suddenly getting DBIF_RSQL_SQL_ERROR, no matter what they wanted to do. When checking system I found many messages like: Database error -1000 a

  • HELP! Lightroom Crashes Only with Adjustment Brush and only when using HDMI output!

    This is very frustrating. I use my Acer N56V laptop to teach Lightroom workshops. I use a 32 inch television as a display. When I have my laptop attached with an HDMI cable and try to use Lightroom's adjustment brush, it crashes. Either the screen an

  • Ipod touch is not recognized by I tunes so cannot sync. It has worked ok previously

    My Ipod touch is not recognized by I tunes when plugged in on a lead. It has worked previously but has just stopped. This means I can no longer sync.

  • Swapping columns in table

    Is there a way to cut and paste  columns in a table in CS5? I need to swap the position of two table columns in a document with numerous tables. The tables are complete and the colums I need to swap are of different widths. Is there a way to cut the

  • Yahoo odd news video will not play,

    When I try to watch odd news video all I get is a blank screen with a revolving circle. Other videos are fine.