How to install windows like Lenovo do (U300e)

It seems to me that Lenovo have installed windows on the C drive of my Lenovo U300e but also on the 32 GB SSD. So it is a sort of cached installation or something.
The laptop boots of the SSD, but it is too small to do a windows install on so some of the windows files must be on the normal hard drive.
My laptop crashed and I am trying to reinstall windows. I have managed to install it fine to the 2.5" hard drive and run it off there, but this is not taking advantage of the SSD, and I would like to set it up so that it boots of there, like it did when new.
Any advice greatly appreciated.
Phil

Similar Messages

How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 4   Checksum: 03    Passed
        MBR Sector 3 Index: 5   Checksum: FD    Passed
        MBR Sector 4 Index: 6   Checksum: 58    Passed
        MBR Sector 5 Index: 7   Checksum: 96    Passed
        MBR Sector 6 Index: 8   Checksum: 7F    Passed
        Data Sector Index: 3   Checksum: F1    Passed
        Original MBR Index: 2   Checksum: BD    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
        Boot Config: 2 (Service Partition containing two Service OS's)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   239 255 255           63    301296177
1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
2   0x00   0x00      0   0   0     0   0   0            0            0
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...

Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 11 Checksum: 03    Passed
        MBR Sector 3 Index: 12 Checksum: FD    Passed
        MBR Sector 4 Index: 13 Checksum: 58    Passed
        MBR Sector 5 Index: 14 Checksum: 96    Passed
        MBR Sector 6 Index: 15 Checksum: 7F    Passed
        Data Sector Index: 10 Checksum: 01    Passed
        Original MBR Index: 9   Checksum: 12    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
        Boot Config: 0 (Service Partition containing one Service OS)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

How to install windows on the SSD (Y580)

I have bought an Y580 recently wIth a 64GB SSD and 1TB HDD. I asked the salesperson upfront if the OS would be on the SSD. He said yes. Turns out that it is not. When i returned to them they told me it's a hybrid drive solution. And they have no idea how to install Windows on the SSD.
I did some research and found out that Lenovo uses *Rapiddrive* to speed up programs. Hence why i can't see the SSD in WIndows as it is merged with the 1TB HDD. In Disk management 2 disks show , 0 and 1 , but Windows asks to give disk 1 a MBR or GPT (this is apparantly due to the rapiddrive methode).
My questions:
* Is it possible to install Windows on the SSD and if so how can that be done without loosing the backup on the hidden partition of the 1TB disk? (so that OKR still works)
* What are the benefits of Rapiddrive over using the SSD as bootdisk?

Since it is a hybrid drive, it works a little bit differently; Lenovo's "Rapiddrive" is also different from other hybrids, and in the sake of making it "user friendly" and seen as a single disc they have probably nerfed some configurability for the intermediate/advanced users. However, Windows should already be installed on the SSD portion of the drive, this should be done automatically according to this press release:
http://shop.lenovo.com/us/sitelets/ee/consumer-news
"In the factory we will preload not just Windows 7 on the SSD, but also our Lenovo applications like OneKey™ Theater or OneKey™ Rescue System. The applications, operating system, drivers and other files are all fully-optimized for Enhanced Experience to make them load much faster. This, combined with their installation on the SSD will make the boot time to Windows desktop even faster. Some portion of the SSD will also be reserved as the Windows Paging File — this is used by Windows as 'virtual memory' additional to the normal RAM installed inside the computer. With the SSD acting as the Paging File, general Windows 7 performance will also benefit, especially when multitasking several applications.
The remaining space, which will typically be around 15GB on a 32GB SSD, will be empty, ready for the user to install their favorite applications and files."
I have some of the fastest SSD's around installed on my desktops (SATA III), and while they are blazing fast, keep in mind the whole boot sequence still isn't going to be instantaneous even with an SSD (the biggest differennce you will notice is by the time Windows is loaded, it's fully loaded to the RAM, whereas a normal HDD you may see the desktop but your PC will still be cranking away with startup processes). If your startup is taking 30 seconds or less, maybe even a little longer, it's probably accessing the SSD just fine; if it's taking closer to 60 seconds, then yeah it may need to be reinstalled/reconfigured.
As for reinstalling, sorry I won't really be able to help, hopefully someone else can come along; I personally have never used OKR anyways, and aside from doing a ghost backup I wouldn't say for sure that OKR would be salvageable with a fresh install. And because the Rapiddrive is its own technology, half SATA half PCI-E, I also couldn't tell you if it's even possible to fully seperate the two and keep them as distinct drives.

How to install Windows 7 on a MacBook Air?

Hi everybody,
I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
I have tried to run bootcamp and follow the instructions, but to now end.
on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
when i start boot camp on my iMac, this option will be greyed out.
Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
thanks!

30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
There is a program to create DVD from ISO or .exe
Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
Disk Utility is not a good method for burning Windows DVDs.
http://simplyburns.en.softonic.com/mac
https://discussions.apple.com/thread/3241150

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo

How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?

I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant

I have Macbook Pro 13" mid 20012. How to install Windows 8 onto the mac using DVD? 10.8.3

the title says it all.
i have windows 8 DVD and i would like to have a clear instructions on how to install windows 8. I dont understand the need for USB

Welcome to the Apple Support Communities
You need a USB drive to install the Windows support software. It contains all the drivers that your MacBook Pro needs, and you will have to install them after finishing the Windows installation. If you don't install them, a lot of things won't work: the wireless card, the sound card, the brightness, the trackpad gestures... Apart from that, you don't need it for anything else.
Apple has released the official steps to install Windows 8 on a Mac, so if you want, print this PDF > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

How to install windows 8.1 in macbookpro

how to install windows 8.1 in macbookpro
im using MacbookPro version 10.8.3

You can install Windows using Boot Camp Assistant, instructions located here: http://www.apple.com/support/bootcamp/
Or, you can install Windows using a virtual machine like Parallels, Fusion, or VirtualBox. Instructions located on their respective sites.

How to Install Windows 7 or 8 to Imac if you have never owned these OS's before?

Hi Guys / Girls.
I hope someone can help me.
I recently bought a new Imac (no optical drive). My OS is Mountain Lion.
I have seen many topics / videos on how to install Windows 7 or Windows 8 on my Imac, however I have a problem!
I don't own a copy of Windows 7 or Windows 8.
Where can I buy and download it legally?
I tried the Microsoft website, but I can't find windows 7?
The download for Windows 8 is only an upgrade if you already have Windows 7.
Is there a way that I can buy and download the full version of Windows 8 without Windows 7?
Or can I download Windows 7 from somewhere?
The other option I have is I have an old Windows XP installation disc.
Can I some how bump this up to Windows 8 and then use bootcamp to install to my Mac?
I'm not sure which will be the best way to install the new Windows 8 to my Imac.
Thank you in advance for your help.

Well, a lot of questions here.
The reason you cannot download Windows 7 from Microsoft is that they discontinued it as a download in December 2012.
There are places you can download Windows 7 but probably not 100% legal - so I won't say anything more about these. However, you can still buy genuine versions via Amazon.
As you say, a full (non-upgrade) version of Windows 8 (actually 8.1 now) is not available from Microsoft as a download. Even if it was, it would be $200+
I suspect that your most economical option is to invest in a cheap USB CD/DVD drive to connect to your iMac and install XP under Boot Camp to see if you like the way it works. You could then decide if you want to upgrade.
You can upgrade to Windows 8.1 (about $120 for upgrade) from XP either by download or buying the upgrade discs - cost will be similar and if you already have the drive, then it will be straightforward installation. Again, copies available via Amazon.

How to install Windows 8 on a blank HardDrive

So hi again guys! I was wondering how to install windows 8 on a blank hardrive...
Many of you will say just use bootcamp... I can't... I don't have enough space for windows 8...
So I decided I will install it on a blank HardDrive...
Can anyone give me How to guides? Please
I need windows 8 because I want to play Windows based games (Smite, 8bit MMO and many more)
Thanks in advance guys...

Why don't you ask on a Windows forum about how to install Windows on an external drive? I think Windows 8 has a Windows to Go version. Boot Camp does not support installing Windows on an external drive. You could do this using a virtual machine like Parallels, Fusion, or VirtualBox.
But running Windows from an external drive will be extremely slow compared to an internal installation. I doubt you'll be happy with game performance.

How to install windows xp or 7 on a cell phone

Hi,
Can any one please let me if there is a phone on which we can install windows xp or 7 and run it the way we normally run it on our pc. Can we then run the application on it the way we do on our pcs.
Can any one tell me as to how to install windows xp or 7 on Nokia n958GB or any other phone of this family or any other? Is it possible in the first place to have windows xp or 7 on a cell phone? If yes, how?
And if it is possible to have windows xp or 7 on a cell phone, then will it be possible to run some of the most common applications on that phone which are normally run computers using that specific operating system?
Thanks,
Nadeem

This is a topic I most love to discuss.
I speculate Windows XP or 7 won't run on Nokia Symbian phones properly due to CPU capabilty and compatibility.
I know technically MS-DOS and Windows 3.1 are able to run S60v3, but I haven't worked out the steps and details to implement that.
Personally I think running Windows 3.1 on S60 doesn't make too much sense. Running MS-DOS is more useful, as you may run heaps of DOS games and full keyboard capability is definitely an advantage for handsets like E72.
Where is the best site for these resources?
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

Re: How to install Windows Xp on pre-Vista laptop Satellite A300?

Hello
I'm now facing a problem when i try to install windows xp on my pre- Windows Vista laptop operating system ..
A300 when i input windows xp disc and boot from cd/dvd .... there is an error tell me that : you have viruses on your hard disc or scan it from viruses , or something like that but i test the same OS disc into other pc and its working also i have Gdata IS 2012, and i think its restriction from toshiba or i dont know , but its very important to install windows xp ...
i hope you help how to install windows xp on my laptop .
Regards
John

Hello John
It is not easy to understand the whole situation, especially this part with viruses.
In my opinion WXP installation should not be problematic.
What you need is WXP SP2 or SP3 disc and SATA driver. Without SATA driver HDD will not be visible for WXP.
More about that you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38

How to install windows 7 to my 15-d041tu notebook

how to install windows 7 to my 15-d041tu notebook

Good Morning @milinda3nadees ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that your notebook came with Free Dos. HP 15-d041tu Specifications
To install Windows you will need to change the boot order.
Now boot to your Windows disk or USB key and follow the prompts.
Here is a link to Configuring the Boot Order in the System BIOS.
Here is a YouTube video on installing Windows 7 from Free Dos that you may also like to view.
FreeDOS to Windows 7
The Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How to install windows 2000 on my g560 ?

How to install windows 2000 on my g560 laptop?
I am able to install winxp and upwards only.is there a way through bios setting or anything and secondly can u use winxp drivers for win2000?
thanks everyone here for your time
u can email me too: *****
Moderator note: member's email address removed to keep away from the spambots.

Windows 2000 has been largely abandoned (and with VERY GOOD reason) why on earth would you want to install that outdated unstable OS? It's plagued with security issues bugs and BSOD issues from being unsupported so long (even when it WAS supported) chances are no drivers were made compatable with that OS for your machine as XP is a totally different monster you likely would not find drivers for 70+% of your hardware. I'd 110% advise against even trying it XP is the oldest supported windows OS anymore an even it is about to lose support very VERY soon (if it hasn't yet already). I can't stress enough how much of a bad idea (and without any advantages by doing so) it would be to even attempt this.
Lenovo 15.6,B575 W7 E-450,ATI6320,320GB,8GB DDR3 Ram-*Midnight*
Dell Latitude D430,12.1 C2D 1.3 ULV,2GB DDR2,80gb SSD,Intel 950,XP *Mini Me*
Dell Latitude D630,14.1,C2D2.0,W7,500GB,8GB DDR2,X3100*Old Faithful*
Nvidia I shall Never forgive you for the 8000m Series.

Somebody can help me how to install windows in my imac

Somebody can help me how to install windows in my imac

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to install window 7 on mac mini ?

how to install window 7 on my mac mini?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to install windows like Lenovo do (U300e)

Similar Messages

Maybe you are looking for