How to install Windows updates for Windows server 2003 SP2 Manualy

Hi All,
We have 10 machines running Windows server 2003 SP2. These machines are ISA servers kept in DMZ.
So these servers do not have internet access any any means. We are receiving Non compliance for not patching them for specific .NET framework patches. We have installed them but still the Scanning tools says it is not installed.
We have planned to check it through Windows update but as it is in DMZ there is no Internet connection and we also cannot push through WSUS server as well.
Is there any way we can get the update package in Bulk so we can manually patch them rather than manually downloading them 1 by one and installing them ?
Gautam.75801

Hi Gautam,
To achieve your goal, I suggest you set up a WSUS server on the disconnected network, then exporting updates and metadata from a
WSUS server on a connected network and importing all that information into the WSUS server on the disconnected network.
For more detailed steps, please refer to this article below:
Set Up a Disconnected Network (Import and Export Updates)
https://technet.microsoft.com/en-us/library/cc720512(v=ws.10).aspx
In addition, here is a WSUS forum below if there is any WSUS related question:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverwsus&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

How to install windows server 2003 on Sunfire x4150?

hi, i'm very new to Sun server.Sorry if i dont know anything about it. But now i have to install Windows Server 2003 on this Sunfire x4150 server. How can i do that? I've try to install but it give me error about the driver.
Some question:
1. Can i install both Sun Os (Solaris?) and Windows Server together? If cant, can i format the Solaris OS and install a fresh Windows?
2. OR actually i should install inside a Virtual Machine?
Here are some links that i found. Am i following the right direction? The article suggest me to download FloppyPack from Sun's website. So, should i just downlaod the FloppyPack (360+KB) ? I dont need to download other driver package?
http://www.seedsofgenius.com/pdf/wp1.pdf
http://dlc.sun.com/pdf/820-5837-10/820-5837-10.pdf
Sorry, i have totally no idea at all.
Thank you very much if you can help me . OTL

Might be a bit late for you, but if this helps anyone else, good.
I had the same issue with an X4600 lately. You need to download the Sun Installation Assistant cd and boot from it to install anything other than Solaris. This cd is similar to the ones that Compaq andDell sendout with their servers. It will do a semi automatic install after you give it the information about the os, set up disks, etc.
Easy to do, search the sun support site for the SIA image particular to your hardware.

How to install windows server 2012 r2 without remove the current windows 8.1

how to install windows server 2012 r2 without remove the current windows 8.1

Use guide below to convert it to 'basic' disk, or install windows on another drive. The supported way is to delete all partitions and convert it to a basic disk.
https://technet.microsoft.com/en-us/library/cc755238.aspx
However, your windows 8.1 must be on another drive?, as windows cannot boot from a dynamic disk.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

Hi,
I bought a new lenovo G500s essentials note book. It's a freedos system. I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
Technical Information:
STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
Can someone please help.
Regards,
Priya.
Solved!
Go to Solution.

I don't have a similar machine to look at so this is a bit of a guess:
Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup
There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode". Select "compatible" and save and exit.
I'm not certain this will fix your problem, but it's worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to migrate windows server 2003 to 2008 live server

How to migrate windows server 2003 to 2008 live server without shutdown could anyone explain me ?
Thanks & Regards, Amol . Amol Dhaygude

I don't think you can do it without a shutdown. This also depends on the types of services, roles etc hosted on the server.
Refer this : http://technet.microsoft.com/en-us/library/cc755199(v=ws.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

RC-50004: Fatal: Error occurred in ApplyAppsTechStack: While Installatling EBS R12 on window server 2003 SP2

Hi Mr.Hussain,
Can you please guide me how to solve this error,
i am trying to install oracle EBS R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
can you please guide me how to solve this error,

This is a generic error so you would need to check the installation log files for details about the error.
Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
Thanks,
Hussein

Windows Server 2003 (sp2 - 32bit) - OEM problem

I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

user12183171 wrote:
I inherited this in-house (closed) system a few years ago and have not had a problem until a couple of months ago. It has been running for about 1 1/2 years.
Desc:   Oracle 11.1.0.6 (64bit) on Windows Server 2003 (sp2 - 32 bit)   [[ yes, I know, what the heck is a 64 bit Oracle running on a 32 bit windows?]]
You'd better double check that. It is fundamentally impossible for 64-bit software to run on a 32-bit OS.
     2 - instances running - one production with associated ASM, one RMAN cat with no ASM - all folders are backed up to a large SANS.
          - each instance has its own listener
One single listener, with the default name of LISTENER, using the default port of 1521, is quite capable of -- indeed, was designed to -- service multiple instances of multiple versions running from multiple homes.
          - each instance has its own dbconsole service
Problem:
1. a couple of months ago, when I attempted to access the production OEM, I started seeing
service-specific error 1 (0x1), NET HELPMSG 3547
     -- the first time this happened, I immediately opened the OEM for rman and it was successful
          It was also fortunate in that we were doing some power upgrades and all of our systems were shutdown - and after this system was powered on, the production OEM worked fine.
     -- a few weeks later, the prod OEM was not accessible - giving the same 3547 error. We were not able to shut down, so I stopped the Windows services for this instance, and stopped
               the windows listener services for both instances. I then started only the production windows services, and was able to use the prod OEM. Then I started the listener service for
               the rman and all was well.
     -- this Monday (today is Thurs), the prod OEM was inaccessible again and I tried the stopping and restarting of the services and started seeing 7024 errors. I tested the rman OEM and
          it was fine. I stopped both instances via sqlplus commands, used emctl to stop both dbconsoles (of course, the prod one was already not running), shut down the ASM instance and
          then stopped all the Windows services. then I only brought up the prod services and confirmed with sqlplus commands that everything was started - but the final service, dbconsole
          would not start. This morning I was able to reboot the server (after shutting down all the Oracle services) and now I can access the prod and the rman OEMs.
2. What the heck?   Because I can get the prod OEM working with just a reboot, I don't know if I should have to rebuild dbconsole.   And since I'm the only one disuncombullated because
          of the prod OEM, it is not a fall-down-crying situation - I'm actually a sqlplus kinda guy, but when I'm just doing visual maintenance, it is nice to view OEM remotely for a quick check.
3. I've been working with Linux systems and Oracle for many years and I've never experienced this kind of problem.   Oh, and since it is a closed system, it will be when pigs sprout wings
               and start flyng that I'll be allowed to install patches - but again, if a reboot 'fixes' this issue, what the heck? Oh, finally, I don't believe in the common windows fix of rebooting - I'd
               like to find out WHY this is happening and literally fix it.
ANYBODY have a clue?   Not me...
Thanks for your time.

Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
It should be supported from technet site
And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

Thanks for the reply.
I copied some sentences in Setuperr.log
2014-07-10 23:58:33, Error
Failed to find driver file path. Error=00000002x[gle=0x80092004]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
{8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
does not exist.[gle=0x00000003]
2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
{743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
usbhub20.
2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
and drmmgrtn.dll?

Accessing to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit leaves a fork of the explorer and its children processes !!!

When I try to access to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit and then closes the RDP from Windows XP (the client side), a fork of the explorer and its children processes will persist in the server side !!!
Take a look at the screenshot to understand:
is this normal behavior !?
Thank you for your understanding ;)

Hi,
I think this is normal behavior.
You just close the RDP from client side but not log off the server, right?
Regards.
Vivian Wang
Yes, right I closed the RDP from client side, not log off the server.

Essbase 9.3.1 and Windows Server 2003 SP2

Is anyone successfully running Essbase 9.3.1 on Windows Server 2003 SP2 ?
The documentation I have mentions only SP1, but we'd like to upgrade to SP2 providing no issues arise from doing so.
thanks,
Svejk

There are no problems running on SP2.
Cheers
John
http://john-goodwin.blogspot.com/

WebLogic Server 9 with Windows Server 2003 SP2

Hi,
DO you know if Weblogic 9 can work without any problem on a Windows Server 2003 SP2? I looked an i only find that it's supported on Windows Server 2003 SP1.
Hope you can help me
Greetings
Norberto

We are seeing alot of these - using the 'retry' option when scheduling gets the Publication to finish successfully - the log however is full of these messages.
Did you discover anything further Ranjit?
Regards,
Ferdie.

JDK issues with Windows Server 2003 SP2 Standard Edition

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

JDK issues with Windows Server 2003 SP2

Hi,
We are running an ETL (Extracts-Transform-Load) Jar file which reads data from MS Commerce Server 2002, AS400 and SQL Server 2000 database and populates a SQL Server 2000 database. The jar was running fine on Windows Server 2000 but started to stall when we are running it from our newly acquired Windows Server 2003 SP2 server class machine. The JDK version is 1.4 on Windows 2000 and 1.6 on Windows Server 2003. Interestingly, the jar is running fine via JDK 1.6 on another Windows Server 2003 dev machine.
The jar does not throw any error and we have to manually shutdown the execution of the jar.
Can anyone please suggest some solutions here?
Thank you!

Um, does this have anything to do with JavaMail? If not, you might try a more appropriate forum.

How to install Windows Server 2008 (dualboot) on a PC with Windows 8.1 already on it?

Hi, I bought a new PC with preinstalled Windows 8. Now I need to install Windows Server 2008. Anyone can advise me how to
do it? It has to be in dual boot, in Virtual Machine the display is way too small

You should check out the Boot-to-VHD capability.
Here is how we do it in a lab environment which we got from a Microsoft lab:
-Verify your computer is running Windows 7 or later.
-Verify you have full administrator rights to your currently installed operating system.
-Verify hard disk encryption or other pre-boot security is turned off.
-Confirm that hardware virtualization technology and memory protection are both enabled in your computer's BIOS setup.
Now we just setup the a VHD with an operating system on it (can even use a downloaded server 180 day trial VHD if you are in a rush). Then go to Disk Management and select Attach VHD and point to the file. Note the drive letter that is assigned to the
mounted VHD.
Run a command prompt as administrator and type: " bcdedit /export BCDBackup.bak " to create an exported backup of your boot loader configuration. Now type bcdboot [drive]:\windows.
Now to test your dual-boot configuration, restart your computer and select the new OS boot option.
An optional last step would be when complete to restore your boot loader by running "bcdedit /import BCDBackup.bak" and delete any VHD files.
A more detailed guide written for Windows 7 but still applies for Windows 8 can be found at:
http://technet.microsoft.com/en-us/video/windows-7-boot-from-vhd.aspx
Hope that helps.

How to install Windows Server 2012?

I am trying to install Windows Server 2012 on one of my computers and make it the OP but every time I try to download it from
http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
And when I put get started it always asked me for my company and I don't have one. I want to use this for personal use. So is there a way I can download it or is it not possible. If it is please direct me to where I can find it.

You can download the evaluation here.
http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx
Not sure what your asking but type in Acme (or anything else) if prompted for company info.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to install Windows updates for Windows server 2003 SP2 Manualy

Similar Messages

Maybe you are looking for