How to install Windows XP in Satellite A210-14s - Need step by step info
I'm not an expert about OS-Installation. I have heard from many people how complicated to install WXP in Vista Notebook. Is there any document, how to do it step by step? What should I do first? My labtop will work 100% after I install WXP? What I have ist an installation CD of WXP with SP2.
Can anyone explain me exactly? Thanks!!
well if you want replace your vista i recomend not to do it if you not pretty good and comfortable with os instaling because winxp installation is nothing hard the crazy hard part is setup all the hardware to work properly ...
i have A210-16f (can be purchased only in czech or slovak republic.) and i install the winxp a month ago and i still have problems FN keys still not working , touch pad is working onli halfway ( meaning it only points and move the cursor but all the other funcions of it still in dark)
soooo i recomend read this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26818 its how i did it.
my apologies for my english writing and spelling hope you did understand all above.
zero
Similar Messages
-
How to install Windows on W2100z...help needed
hello
Can anyone plz tell me about how to install windows on W2100z.I tried in lot of ways but to no avail.First of all i tried win xp 32 and 64 bit cds but no success.Then i created the winxp 64 cd by runing the xp_reburn script from supplement cd 2.4 but same problem of "Setup didnot find any harddrives attached to your system" appears.Then i attached a floppy drive and tried floppy disk containing drivers of Scsi from supplement cd and after pressing F6 i provided the floppy,it shows the menu containing four driver names ,i tried each one of them but same old problem comes later in the setup.
Can anyone help me in this regard ?
thanksit comes without OS [OS less]
see here for guides how you can install OS[Win8/Win7] in UEFI mode from USB key:
http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/
Code: [Select]
https://www.youtube.com/watch?v=tSmeugjS7XM -
How to install Windows XP in Satellite Pro L300-1A9?
Hi!,
first of all, sorry if I'm asking something really obvious, but I'm quite new with this issues...also sorry for my English, I'm not native.
I have a Toshiba Satellite Pro L300 1A9 with Windows Vista preinstalled but the thing is I prefer Windows XP. I have tried to install it but it won't work.
I have read lots of posts and comments about this issue in this forum and also in the web. The problem is I don't know if the procedure and the drivers to download are the same for all the L300 models. Mine is L300 1A9.
Anyone could give me some extra simply instructions (I'm a beginner) about how to do solve this problem or any link relating this issue? I have seen many of them, but none about this model L300 1A9.
Thank you very much!!Hi Lars_3,
thank you very much for your reply and interest.
When I say that installing Windows XP doesn't work, I mean that my laptop has Windows Vista but I have tried to reinitialized (format) it to install Windows XP, but when I run the Windows XP (original) disk an error message pops up and I can't continue the installation.
I have had a look to the Toshiba's downloads link you posted, but there's no mention to the L series model. The options available are for M-Series and Net-Book series, so I wonder if it is possible to use one of them for my Toshiba Satellite Pro L300 1A9?
Thank you very much for your kind help! -
Need instruction how to install Windows XP on Satellite A200-1AE
Hello can some one write a instruction of installing Windows XP Professional on this notebook?
What I need before instalation?
I have oryginal Windows XP. Which drivers i must have before? And what about boot?
I guess that my PC have SATA drive and XP setup don't support it.
Can I burn driver on CD? Becouse I don't have FDD.
Thanks for help.You need instruction?
Search in this forum for similar threads about this theme.
You will find many threads!!
But here is a little hint;
You need to include the Intel matrix Storage Manager into the XP setup.
Without the iMSM the XP OS will not find the HDD!!!
The iMSM can be installed using the USB FDD drive or you can create a new XP CD using the freeware tool called nLite.
After the OS installation, you should download and install the Toshiba drivers from the Tosh European driver page.
PS: should check the driver installation instruction txt file before you will start to install the Toshiba XP drivers -
How to recover Windows Vista on Satellite A210?
My friend bought Thoshiba Satellite A210. The machine is running slow, so he wants to reinstall Vista.
Can we recover it from hard drive?
He does not have any CD coming with the laptop.
Thanks.The A210 was definitely delivered with the Toshiba Recovery DVD which would help you to get the notebook back to the factory settings.
As far as I know the A210 was not equipped with the HDD Recovery option and therefore the Recovery DVD should be in the package.
If you dont have the Recovery DVD anymore, then you could order it here:
https://backupmedia.toshiba.eu/landing.aspx
Bye -
How to install Windows 8 on Satellite C855-21W - No disk
Hello,
Recently the HDD from my SATELLITE C855-21W crashed. All Data wear lost.
Serial: YC273011R
Now i would like to reinstall Windows 8.
But i have no CD /DVD and all partitions on the HDD are gone.
How can i reinstall Win 8 on the Laptop again?
Where can i get a DVD?
ThanksHi
This is pity but HDD can always start to malfunction and therefore its advisable to create a Recovery Disk before starting to use the notebook.
However, now you cannot create such recovery disk because the files are lost.
Now you have two options:
1) You can install the Windows 8 using Microsoft Win 8 disk (you will need to purchase Win 8 if you dont have it). The essential Toshiba drivers could be downloaded from the Toshiba driver page
2) The second option is much easier: you could order the Toshiba Recovery disk from this page http://backupmedia.toshiba.eu/landing.aspx and could set the notebook back to the factory settings.
Greets -
Satellite A210-15Y - How to install Windows XP?
I had Windows Vista and I upgrade it with Windows 7. Now I really want to install Windows XP.
When I put Windows XP CD in after a while I get an blue screen whit an error .
pls tell how to install Windows XP on my notebook and if I need some drivers to do it pls put links from whereIi can get them.
P.S. sorry for bad englishHi
I think the problem is that you tried to install the Win XP without installation of SATA driver.
The A210 needs SATA driver in order to recognize the HDD.
You could also check the BIOS settings. There should be a option called SATA mode.
This can be set from AHCI to compatible and this will allows you to install the Win XP without the first installation of SATA drivers.
Please also check other threads here in the forum about the same theme!!!
PS: It's advisable to use Win XP including SP3!!! You can include the SP3 using the nLite software!!! -
Re: How to install Windows Xp on pre-Vista laptop Satellite A300?
Hello
I'm now facing a problem when i try to install windows xp on my pre- Windows Vista laptop operating system ..
A300 when i input windows xp disc and boot from cd/dvd .... there is an error tell me that : you have viruses on your hard disc or scan it from viruses , or something like that but i test the same OS disc into other pc and its working also i have Gdata IS 2012, and i think its restriction from toshiba or i dont know , but its very important to install windows xp ...
i hope you help how to install windows xp on my laptop .
Regards
JohnHello John
It is not easy to understand the whole situation, especially this part with viruses.
In my opinion WXP installation should not be problematic.
What you need is WXP SP2 or SP3 disc and SATA driver. Without SATA driver HDD will not be visible for WXP.
More about that you can read on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=38 -
Can't install windows 7 on Satellite C75D-B7260
Can't install windows 7 pro on Satellite C75D-B7260 I have tried a clean install and have tried through windows 8 pro. Win 7 won't get past start screen. I have secure boot turned off in BIOS and there is no CMS or legacy setting. System bios version is 1.20 and ec version is 1.10 Toshiba service station does not find an update for the BIOS. and only 1.10 is listed on the product page. I found a 1.30(
BIOS version 1.30 for Satellite C7x-B/L7x-B/S7x-B (PSCL4x/PSKRLx/PSPP2x/PSPP4x/PSCNUx
I have not tried to use this update as my specific part # is not listed in the install notes.Satellite C75D-B7260
Downloads here.
You can install Windows 7 if you like. But I doubt you'll ever locate enough of the drivers and utilities to make that laptop work as designed. Toshiba certainly did not create them.
If you have no end of time to burn hunting for those and don't mind some features missing, here's how to install Windows 7. The disk now uses GPT partitioning, but you want the old MBR partitions. So use the installation package to remove all the existing partitions and create new ones (one is sufficient).
-Jerry -
How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)
This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 4 Checksum: 03 Passed
MBR Sector 3 Index: 5 Checksum: FD Passed
MBR Sector 4 Index: 6 Checksum: 58 Passed
MBR Sector 5 Index: 7 Checksum: 96 Passed
MBR Sector 6 Index: 8 Checksum: 7F Passed
Data Sector Index: 3 Checksum: F1 Passed
Original MBR Index: 2 Checksum: BD Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 1 Alt Boot Partition (0-3): 1
Boot Config: 2 (Service Partition containing two Service OS's)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 239 255 255 63 301296177
1 0x00 0x12 0 193 255 239 255 255 301296240 11279520
2 0x00 0x00 0 0 0 0 0 0 0 0
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 11 Checksum: 03 Passed
MBR Sector 3 Index: 12 Checksum: FD Passed
MBR Sector 4 Index: 13 Checksum: 58 Passed
MBR Sector 5 Index: 14 Checksum: 96 Passed
MBR Sector 6 Index: 15 Checksum: 7F Passed
Data Sector Index: 10 Checksum: 01 Passed
Original MBR Index: 9 Checksum: 12 Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 2 Alt Boot Partition (0-3): 2
Boot Config: 0 (Service Partition containing one Service OS)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done! -
How to install Windows 8.1 Enterprise on Ultrabook which came with basic Windows 8.1
Hi,
I guess I'm not the first one with this question but anyway...
I've got 2000EUR expensive Ultrabook recently, and what's interesting it came with Windows 8.1. Just standard basic Windows 8.1, not Pro or Enterprise.
Obviously I needed to upgrade it with larger SSD 1Tb and install Windows 8.1 Enterprise as I need Hyper-V and other Enterprise version functionality on day to day bases.
I was surprised that I can't do so as SLIC is reverting Windows 8.1 back to basics!!!
.. so my question is - How can I can Windows 8.1 Enterprise 64Bit on to very expensive Ultrabook which came with Windows 8.1?!?!
Kind Regards,
KonHi,
Enterprise edition of Windows Client OS, is not available via OEM and not via Retail - it's only available via Volume Licensing agreement.
you can purchase an upgrade to Pro, via the Microsoft Store:
http://windows.microsoft.com/en-au/windows-8/feature-packs
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
How to install Windows 8.1 Pro on Macbook Pro
Hello everyone,
I'm new to these forums and new to bootcamping as well but have been reading all kinds of posts about how to install Windows 8.1 on their Macs using bootcamp. I am however having trouble with this situation as I have no clue what to do next. I have a Macbook Pro 2011, running on Maverics, and I recently downloaded a digital copy of Windows 8.1 Pro, 64-bit, for the Mac platform, along with its CD key through my University's hub website as can be seen here.
After finishing the downloading process, I received this file which is about 4GB large.
When i double click on the file this happens. It opens something on DEVICES which gives me what is on the 2nd image.
At this point, I'm at a loss on what to do next. Do i burn the file on a DVD hoping that Bootcamp will recognize it as a windows disc? Any help would be appreciated, thank you.You need a 'Full' Installer.
From Boot Camp 5.1: Frequently asked questions - Apple Support
Which versions of Windows work with Boot Camp 5.1?
Boot Camp 5.1 supports 64-bit, non-Enterprise versions of Windows 7, Windows 8.0, and Windows 8.1. This version of Boot Camp doesn't support Windows XP, Windows Vista, or any 32-bit version of Windows. Depending on your Mac, you may be able to use an earlier version of Boot Camp to work with other versions of Windows. For details, see the Boot Camp system requirements for Microsoft Windows.
Can I perform an upgrade install from a 32-bit version of Windows to a 64-bit version of Windows?
It's not possible to upgrade a 32-bit version of Windows to a 64-bit version of Windows. Back up your important files, then perform a new install of the 64-bit version of Windows. -
how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
Iam new to coding. please help me.try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0 -
How to install Windows 7 on a MacBook Air?
Hi everybody,
I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
I have tried to run bootcamp and follow the instructions, but to now end.
on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
when i start boot camp on my iMac, this option will be greyed out.
Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
thanks!30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
There is a program to create DVD from ISO or .exe
Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
Disk Utility is not a good method for burning Windows DVDs.
http://simplyburns.en.softonic.com/mac
https://discussions.apple.com/thread/3241150 -
How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo
How to install windows 7 on Old Macbook Pro 15'inch 2.3 Core 2 Duo:
I want to known how to install windows 7 on Old Macbook 15'inch 2.3 Core 2 Duo by using usb
I try many time, but after restart bootcamp partition, apple show blinking folder error
I think this firmware not support to install windows by usb
NOTE:
I Cannot install Apple New OSX Mountain Lion, Mavericks etc in this MAC
If I cannot install windows 7 on this MAC, so tell me what I will do with this MAC ?I agree with the optical drive, mine acted strange, and i thought people were crazy and my drive was shot, but a simple cleaning disc worked miracles.
But- are you trying to reboot with both the USB install and the DVD install both plugged in? that would definitely cause confusion.
Do this, reboot with NOTHING plugged in. Once you hear the Mac chime, immediately press and hold option.
You should only see the Mac HD, and Recovery Partition.
THEN plug in your external DVD, and wait a min or two, you should see a disc icon appear next to the recovery partition that says something like windows. If that doesnt appear after a min or two, unplug it and put the USB stick and do the same thing. I had to do it this way on my mid 09 MBP.
Let me know if this works to start the install. If not we may have to start over with Bootcamp Assistant
Maybe you are looking for
-
PowerBook G4 12" mini-DVI strange behavior
Greetings everyone, I'm turning to you guys in these forums as a mean of last resort. My issue being a connector, which is not functioning as it should. The problem will be described in the following part. The Issue: I bought a mini-DVI, refurbished,
-
I have 2 ipads and my iphone on the same icloud account and it wont let me back it up cause I dont have enough space. So I want to move my iphone over to a new icloud account with my new apple id that i made but i dont want to delete the ipads off th
-
Can't open fresh install of iTunes (fresh install of Windows 7)
Hi everyone, Well this problem has my head spinning. I'm an IT troubleshooter so I've done a lot of various trailing already which I detail below. Basically, we're looking at a brand new computer with a new installation Windows 7 Home Premium 64-bit.
-
Problem with opening Transformers.dcf in my N96
My phone have transformers movie and a i play it and didn't have any problem but yesterday i resotore all setting to original factory setting with this code "*#7370# after restoring finished transformers movie didn't play and said "file is locked" i
-
Report Requirement-Vendor NO., PO Amount, details of Invoice
Hi Gurus, Can you please help me in finding any standard report which includes following fields :- · Vendor Name & Vendor Number · Details about the invoice (Number, Date, amount, etc) · ERP Number · PO number and PO a