How to install Windows XP into a Flash Drive?

I would like to install Windows XP into my flash drive. Not boot from the flash drive and install into my PC. I've searched extremely hard on the internet and found the other thing around and I tried what I could. Any suggestions? (Here's what I tried: Creating partition tables. Install using VMware. Using different formats.

Thanks for the tips. I was able to install Windows XP and boot from the SATA drive by using these options and setting the appropriate boot device selections...
Legacy Mode
ATA Configuration - PATA only
SATA Keep enabled - yes
PATA Keep enabled - yes
PATA channel selection - both
Combined Mode Option - S-ATA 1st Channel
S-ATA Ports Definition - P0 - 3rd./P1 - 4th.
I just wasn't sure if I was really getting "SATA" performance, etc. without specific drivers.
Thanks again.
Bob (ll1951md)

Similar Messages

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Tell my wife that!
This is the best I can do. This way you can use the 2011 MBA way to do things.
Look for the post from @jacktourist. (on page 2 about half way down) This seems to be the easiest.
There are a couple of more similar to this with pictures I've seen around but can't remember where.
Here's another search with added info. It's easier then it sounds.

How to Install Windows 7 By Bootabel Pan Drive

How to install windows 7 by usp pan drive in macbook pro 13" 2011 early with mountain lion 10.8.2

Wrong forum.
Try here:
https://discussions.apple.com/community/notebooks/macbook_pro?view=discussions

HT5639 When will I be able to install Windows 8 on a Flash Drive and not in my HDD?

I want to install Windows 8 on a flash drive instead of my HDD, I hope this could be possible in the future.

Ask Microsoft. It's their software. Windows does not boot from external drives.

How to install Windows on a SATA boot drive

Here is how to install Windows XP on a SATA boot drive. This procedure was first developed by syar2003 and has been used by many iusers ncluding myself. Although it was originally developed for Neo2 mb's and Windows XP Pro, it has general applicability to systems as well.
1. Have only the SATA drive you want to be the boot drive active in your system. Disconnect the power to all other HDD's if any.
2. Have only one optical drive active. Disconnect the power to the other opticals if any. (Best to have a burner optical as master on IDE1.)
3. Plug SATA drive into SATA 1 on the mb. (it may show us as an IDE drive somewhere down the list in BIOS. That's okl)
4. Enable appropriate SATA options in BIOS. Set boot order to floppy, cd, SATA drive. Set boot priority to SATA drive.
5. Partition and format the SATA HDD using the utilites CD that came with the SATA drive. (If you don't have an HDD utilities disk, download one from the website of your HDD manufacturer.)
6. Run Windows setup. No need to load drivers at the F6 promt unless you are planning to do a RAID configuration.
7. Windows XP should install without incident.
8. After you are up and running, plug the power back into your other HDD and optical drives if any.
If you have a board older than the K8 series, it may be necessary to load the SATA drivers at the F6 prompt. If the above procedure does not work, than try it again loading the SATA drivers.
If this procedure does not work for you, it is likely that your particular SATA HDD has some compatablity problem with Windows setup and/or your motherboard. The solution to this is to try another SATA drive. In general, most failures using this procedure have been traced to certain WD, Seagate and Hitachi SATA drivers of smaller capacities. Fewer problems seem to have occured with Maxtor HDD's.

Kaplan, from an earlier post of mine regarding sata2 hdds - I have them plugged into the sata1&2 ports, installed the nvidia raid first and then installed winxp (in both raid 0 and raid 1). My bios is 3.1 and its a known problem that bios 3.3 & 3.4 have nvidia raid problems but seems to be fixed in the beta bios 3.53:
I just purchased 2 hitachi deskstar sata2 80gb hdds ($60 each at zzf) and the interesting thing about them is that you have to "enable" sata2. I have been testing the performance of sata1, sata2, raid1 and raid0 and the results are below.
The drives themselves are factory default set at sata1. Since I purchased OEM, no software or instructions were included. I had to go to the hitachi website download section to download a dos based program (the features program) to enable sata2. After enabling the hdds to sata2, they were recognized in winxp in the nforce ADMA controller device driver and the screen reads with the primary channel as Serial ATA Generation 2 - 3G...and all 4 boxes below it are checked (the boxes enable bios select xfer mode, enable read caching, enable write caching and enable command queuing are checked). An interesting thing about the sata2 spec is that all sata2 hdds must come standard with NCQ...its not advertised on these 80 gb hdds on the hitachi website (unlike the larger hitachi sata2 hdds) but its a standard sata2 spec and these 80gb hitachi hdds are recoginized in winxp as sata2.
The other interesting feature about the hitachi sata2 hdds is setting them up to operate in an adjustable "performance" to "silence" mode. The hdds are default set at high perfromance but you can manually lower the performance to increase the silence of the hdds which is fully adjustable to your liking. I tested the highest silence/lowest performance setting and you cannot hear the hard drive at all.
Testing - I tested the 2 hitachi sata2 deskstars with the first result in sata1 mode, the second in sata2 mode, the third in raid1 mode and the fourth in raid0 mode.
First, a significant increase in raid0 over sata1, sata2 and raid1 with sequential reads and writes (PC Wizard).
Write: 28mb/s vs 29mb/s vs 27mb/s vs 53mb/s
Read: 45mb/s vs 46mb/s vs 43mb/s vs 83mb/s
Second, significant increase in sata 2, raid 1 & raid 0 over sata1 with buffered reads and writes (PC Wizard).
Write: 104mb/s vs 176mb/s vs 165mb/s vs 266mb/s
Read: 123mb/s vs 200mb/s vs 200mb/s vs 293mb/s
Third, significant increase in sata 2, raid 1 & raid 0 over sata1 with burst reads (HD Tach).
Burst Read: 133mb/s vs 225mb/s vs 219mb/s vs 334 mb/s
It is interesting to note that raid1 is better than sata1 but marginally slower in all tests over sata2. Raid0 is significantly faster on all tests.

How to install Windows 7 from a USB drive!

This is even easier than installing Windows XP from a USB drive, and will also reduce the time taken to install Windows 7, it took me about 15 minutes!
The advice in the guide is also applicable to installing Vista.
You need basically:
a USB flash drive at least 4GB in size
a Windows 7 DVD
To sum up:
Format your USB drive, with the NTFS filesystem
Open Command Prompt as an administrator, and run the Bootsect.exe program off the Windows 7 CD to make the USB drive bootable
Copy the contents of the Windows 7 DVD to the USB drive
Restart your PC, press F11 (or whichever key it is) to access the Boot menu, and select your USB drive to boot from
Full guide here:
http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

Quote from: bnborg on 16-February-11, 10:28:04
I have done this and it is simple.
I cleaned and (re)formated an 8GB flash drive under Windows7 using diskpart. I chose quick format and a fat filesystem. It doesn't need to be ntfs. I had diskpart mark the partition active. I copied the DVD contents to the flash drive. I also made a folder on it for motherboard drivers.
After that, I booted the drive on a new machine. Windows7 setup came up, and didn't find any hard drives, other than the USB flash drive. I clicked the button to load drivers, and pointed it to the folder I had copied them to on the flash. Windows installed without problems.
Hi bnborg..Do u mind sharing with me your motherboard driver folder? I have the MSI U135DX Netbook and each time I hit the button to install Windows 7 it asks me for some mobo driver...Think i might need it to get tru with a successful install..

How to install Windows 7 on new hard drive?

I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
1. How do I install Windows 7 on new hard drive?
2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
by the way this is my laptop spec (for reference) ; -
* Note *
I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

I got the solution;
Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

How to install Windows 8.1 without optical drive

I just got a ZBook 14 which was preinstalled with Windows 7. I want to use Windows 8.1 Pro which was alsp delivered on DVDs in the packages. However, this machine does not come with an optical drive. How can I install Windows 8.1 on this machine?
Thanks

Excuse me for being blunt but that is simply b***hit. Windows 8.1 comes delivered with the machine which is brand new and any reasonably new PC is fully capable of running Windows 8.x. The question was just how I was supposed to load it onto the machine as it lacks an optical drive. I suggest you do not give advice unless you know what you are talking about.
For all others thatwant to the same thing.
1. Make a copy of the Windows 8.1 DVD that comes shipped with the machine. See the following guide http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/
2. Set Boot mode in BIOS to UEFI instead of legacy BIOS.
3. Boot from the USB stick and install Windows 8.1, wipe all existing partitions. Please note that this will effectively remove any possibility to revert to Windows 7 by using the recovery partition but since Windows 7 DVDs are also delivered you can use the same procedure as above to install that. I guess that boot mode in this case should be set to legacy instead of UEFI.
Of course, you do the above at your own risk but it has worked successfully for me. You could copy the content of the Application and Driver Recovert DVD for Windows 8.1 to a USB stick as well and install that afterwards.

Does anyone know how to put Itunes music into a flash drive?

I'm trying to put my music from my Mac Book Pro into a flash drive so I can play it in the car.

cristian19862 wrote:
how can I do that?
Highlight the tracks you want in your iTunes library. Insert the flash drive into your computer, open it so it looks like a folder, and simply drag the highlighted tracks to it.
This puts a copy of each file onto your flash drive, and does not change anything in your library.
If you normally run iTunes in full screen mode, make it smaller so you can do the drag,

How to install Windows without USB or DVD drive on 2009 MacBook

Problem
I have a MacBook Pro mid 2009 fitted with both an HDD and SSD.
Obviously I had to remove the DVD SuperDrive to fit in the HDD into the Optical Bay.
This is awesome big and quick storage, but you can't use it for BootCamp anymore, BootCamp Assistant says. Because it needs the optical drive for installing Windows and it won't accept it via USB.
The good thing is, that you don't need the Bootcamp Assistant for installing Windows.
So:
I have Mac Os:X Mavericks working from my SSD (which I fitted to the HDD bay for increased speed)
The HDD is installed in the former optical drive bay, with one MacOS Ext partition for Mac storage and the other one being NTFS with Windows.
Solution
The solution is a little bit tricky, needs either a virtual Windows machine or a real one and it involves removing and refitting your hard drive, but on an older MacBook Pro like 2009s that originally came with an Optical Drive there is no other way. afaik.
Step 0.5
Backup your Data
Step 1
Partitioning your desired drive
You can do this using Apples Disk Utility if you have installed either Tuxera NTFS or NTFS 3G. Or you do that in step 3 in Windows.
I'd recommend a size of at least 30 GB, Windows 7 alone takes up around 20 GB
Step 2
Remove the hard drive and connect it to a windows machine
Afaik the next step has to happen in Windows with full hardware access. If you want to use a virtual machine i.e. VM Ware or Parallels you need to connect it via USB as an external device, otherwise it won't have full access to the partitions. Obviously you can use a real Windows computer too. Still you're gonna need to remove the drive from your Mac.
Step 3
Re-format and set "active" partition state
Format desired partition with NTFS, quick format works fine. (just in case)
Open your Windows 7 Image (or Disk) and Copy the directories "Boot" and "Sources" as well as "Bootmgr" onto the partition
Make the Partition bootable:
Using Windows XP, Vista, or 7, open CMD as Admin (Windows key + R, type CMD, hit Enter)
Enter the following commands, (replace X with what applies to your hard drive):
diskpart
list disk
select disk X
list partition
select partition X
active
exit
X:\boot\bootsect.exe /nt60 X:
Exit and shut down
(Source and additional images: http://www.instructables.com/id/Install-Windows-7-without-USB-or-DVD-without-upg ra/)
(If this is somehow possible using Mac Tools, please let us know!)
Step 4
Fit the HDD back into your mac
Just that.
Step 5
Install windows
Start your Mac and immediately press and hold the alt (option) key until you can select the other drive to boot windows.
Install using advanced installation to select the same partition.
Step 6
Clean up
After the installation press cmd + r (in windows) and type and run msconfig
Click to the Boot tab.
Click 'Windows Setup (\windows)', and hit Delete.
Click OK.
Click 'Exit without restart'.
And lastly, delete the ‘Sources’ folder from your hard drive root (this will free up 2-3gb).
Final Step:
Install the Mac drivers (Get the right version here: http://support.apple.com/kb/HT5634 )
Recommendation: Use Winclone Pro to backup your precious installation.
On a footnote: This article was a big help to me: http://www.instructables.com/id/Install-Windows-7-without-USB-or-DVD-without-upg ra/)

Have you tried resetting the PRAM? http://gigaom.com/2011/07/26/when-to-reset-your-macs-pram-and-smc/
Which Windows version are you trying to install? If I remember right, you can't use windows 8 on these older machines.
Other than that it's hard to say what could have gone wrong. I can only suggest going through the steps again carefully and making sure everything worked the way it should.
Have a look at this article too for a slighly more verbose instruction on making a drive bootable: http://www.instructables.com/id/Install-Windows-7-without-USB-or-DVD-without-upg ra/

I desire to know how to install Adobe Reader on a flash drive.

My desk top computer is older & does not have internet access.
I would like to install free Adobe Reader on a flash drive while on my lap top that has internet access & then install it on my desk top.
Is this possible & if so How do I do it?
[ email address removed by forum host ]

You can download the installer file from http://get.adobe.com/reader/enterprise/ and copy it onto your Flash drive. Be sure to select the right version for the operating system on your desktop computer.

How to install Windows 8 from flash drive

So I want to install Windows 8 via a flash drive . But I don't know how to do it because when I go through the bootcamp setup it asks for a disk. So is there some software to trick my computer into thinking that my flashdrive is actually a disk?

Vegerot wrote:
Okay. Is it possible—if I don't have a large enough DVD—to use multiple smaller DVDs to store it?
The smallest DVD is large enough to hold the Windows installation iso.
It will cost less than $1
Here's a pack of 50, for $15.00

How to install Windows 7 on Late 2013 Macbook Pro?

I purchased a brand new Macbook Pro last week, retina display and all. I've enjoyed it thus far, yet for whatever reason, I can't seem to install windows on a partition in BootCamp like I used to be able to. I'm on Mavericks of course, 10.9.3. I tried installing Windows on an 8gb flash drive, only to find it freeze right as the Windows initial setup comes up. I have no disc drive on this laptop, and I see no reason why I would have to buy an external optical drive just to install windows. I have an ISO file from my university, and all I want to do is use it. Also, VmWare Fusion is not what I'm looking to use.The Graphics card driver fails for most of my favorite steam games. I'd like to use bootcamp how it used to be. I tried editing the assistant's .plist after finding a tutorial on google, but Bootcamp crashes every time. I'm out of options. So my question is how do I install windows 7 on this computer?
Really hoping someone can solve my problem. All I want to do is play Sniper Elite III, and nothing will work. Thank you

Hello Wes109,
Thanks for using Apple Support Communities.
The link below is the help documentation for Boot Camp, which will show you the exact steps to go through in order to install Windows on a Boot Camp partition:
Install Windows on your Mac
https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
Take care,
Alex H.

Installing Windows 7 from USB flash (Macbook Air mid 2012)

Hello,
I read some famous instructions, but they are not for Macbook air mid 2012 as there are some missing options in their Bootcamp Assistant and this on macbook air 2012.
Btw, they suggested some rEFIt program which supports installing windows from usb which is made in 2010 but it has not been updated since then. I tried it but it doesn't work like it is described in instructions.
I have my USB and Windows 7 on it, but i don't know how to install it on the Macbook Air 2012.
Any help will be appreciated.
Kind Regards,

Hello,
Thank you for the explanation that helped me to understand Windows 7 installation process!
Unfortunately i need more additional information as Boot Camp Installation & Setup Guide is very poor with information that i need.
To explain you better what i mean on, i will quote Boot Camp Guide parts with underlined sentences that have been confusing me. Some sentences that have been confusing me more than other ones will be additionally bolded. I will explain you why i don't understand it after every part.
1. "Introduction"
"You can install Windows with an installation disc you provide or, on some Mac computers, with a USB flash drive that contains a Windows ISO images downloaded from Microsoft. Boot Camp Assistant helps you burn the image to the flash drive."
-But i already have my iso image on the USB flash drive. There is no need to be burned again?
2."What you need"
"Boot Camp Assistant erases the flash drive, and copies to it the Windows 7 ISO image and software drivers that let Windows work with your Mac hardware."
-Erasing the flash drive? Does it mean that it will delete my WIndows 7 which is already on my flash drive?
-Copying Windows 7 ISO image and software drivers to my flash drive? Why? I already have Windows on my flash drive! Software drivers? How do i get them and where shall i place them?
3."Prepare your mac for Windows"
"If you want to install Windows from a USB flash drive and you have a Windows 7 ISO image, select option to copy the image to a USB flash drive."
Why shall i select the option to copy Windows 7 ISO image?
1.I already have it on my flash drive.
2. I don't have it on my Macbook so there is no place in a ssd where Boot Camp will find Windows 7 ISO image.
Here is the overview:
Guide is telling me to select the option to copy image to a USB drive which will first erase my USB flash drive and then copy Windows 7 and it's software drivers to my USB flash.
-But only thing that i need is Windows support software and i don't know whether to download it to desktop, or to USB flash drive.
Kind Regards,

H8-1240ef - installing Windows 7 on a ssd drive

Hi,
I have a HPE h8-1240ef with a 1 TB SATA III drive.
I would like to add a 64 GBytes SSD SATAIII Drive in order to install Windows 7 on it , to increase performances.
Since we do not have a "Windows 7 installation CD" with the HP machine, I do not know how to install Windows 7 on the SSD drive and swap the bootable volume, to have the SSD Drive viewed as C: Drive.
Many thanks for your help
This question was solved.
View Solution.

Hey Grboutin,
You will need recovery discs to recover the system. But you will need a 160GB SSD as the minimum size to recover the system using recovery discs.
You can create the recovery discs on your PC, just type in Recovery in the start menu and Recovery Manager should show up. Follow the instructions to create the recovery media either on DVD or a thumb-drive.
here is a link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867124&tmp_task=solveCategory&cc=us&dlc=en&ju...
but - the key is - ANY SSD will not work, you HAVE to have a 160GB or larger to recover to. Otherwise you will need to purchase a retail version of windows.
good luck
bill
I'm a HP employee

How to install Windows XP into a Flash Drive?

Similar Messages

Maybe you are looking for