How to install WLS 10.3.3 and OPFRD 11.1.1.2 + patch 11.1.1.3

I have Windows 2003 SP2 server which meets Oracle requirements. Can anybody explain me step by step how do to that? I have tried, but failed. I couldn't configure domain. On clean OS i have installed WLS withotu configure. Than I installed OPFRD 11.1.1.2. After that I installed patch 11.1.1.3. Everything passed OK w/o problems. Than I strated config.bat. I fill in the details and configuration begins. But stops on first step, when domain should be configured. How to solve the problem?
Thx in advance.

Thanks Rene, but as I said we are not using the same version of WLS and OSB so in that case is there any option that which version of OEPE i should download which support these two versions of WLS 10.3.5 and OSB 11.1.1.4.0.

Similar Messages

How to install FLEX in SAP WAS and How to deploy project into SAP EP ?

Hi.
I want to create SAP EP Contents using FLEX and I have serveral question about this.
1. How to install Flex into SAP EP and What do I have to install ?
2. When we developing SAP EP Contents using FLEX,
Which Tool do I have to use ? (NWDS or Flex Builder)
3. After we develop contents, How can I deploy into SAP EP and
How to create iView for Flex Application ?
Sorry for many question.
Kindly explain this.
Regads, Arnold.

Hi Arnold,
here my answers to your questions:
1) You don't need to install flex under EP, you need only adobe flash player 9 on EP
2) If you want to develop a SAP Ep cont using Flex, you need adobe flex builder 2 or 3 (ide based).
3)You can store under any EP folder (es. KM) the .swf object and html page of FLEX application, create an iView and call the url link
or load the .swf as mime object in BSP on backend syst, include in a bsp page and create iView for bsp..
Regards
Raffaele

How to install Nokia Messaging Software (Push and ...

How to install Nokia Messaging Software (Push and Pull email) on SD CARD?
I have got Nokia Push email instaled on NOKIA 6110 Navigator. This instalation take all of my phone internal memory, and mailbox is in phone internal memory too. How to install or move program or mailbox to SD card?

I'm surprised that Nokia will spend all that effort to miss out on one little detail - EMAILS WITH ATTACHMENTS TAKES UP A LOT OF SPACE - The least they could do was allow us to point the application storage to the SDHC card.
I love the messaging app, but I just can't afford to give up so much phone memory - So it is not getting installed until we can point storage to the SDHC card.

How to install Dual OS(solaris 10 and Windows XP)?

I have got a 80 gb sata hard disk and i am not able to install Dual OS(solaris and Windows XP ) on it.My Partitions are as follows:
Primary partition-5GB
Remaining are extended Partition.
Extended partition details
8 gb NTFS partition(installed windows XP)
7 gb NTFS partiton(No data in it)
20 gb NTFS partition(No data in it)
20 gb NTFS partiton(has data in it)
15 gb RAW partiton
I first installed Windows xp on 8 gb Extended partiton.Then when i installed Solaris i could see only 2 partitons.One with the 5 gb and the other with the 71 gb.I actually wanted to install my solaris on the 15 gb Raw partition.Since i could not see the partition(15 gb Raw) i installed solaris on the 5 gb partition.Now when the comp boots it goes to solairs os only.i dont have the option to choose windows at all.
could any one of you explain me how the partitions are supposed to be and how could i make it as a Dual OS.
Saravanan
Message was edited by:
SaravananMandala

Windows uses the primary partiton for boot, too, even if you installed it on the NTFS volume in the extended partition. Wherever you install Windows, it will need the primary partition for booting. You can never boot from Windows extended partitions
As for the 15Gb raw partition, it look like what you call 'RAW partition' is actually just a small little part inside the extended partition. All your NTFS partitions (and your RAW partiton) are logical volumes and they all reside inside the extended partition. Even though Windows sees them as separate drives, each with its own drive letter, just as it sees the primary partition.
You may try do use Windows fdisk or diskpart to delete the last logical volume in the extended partition, and then get the ntfs resize tool from Linux, or the CD1 from the Debian Linux install CDs, which has it included and accessible with a nice user interface, and resize your extended partition.
I don't know if it works, I only used it to also resize some logical volume inside the partition. ntfs resize tool might not be easy to work with, you will need to read its documentation, but it does resize NTFS partitions (I have seen it).
If it works, then you will have your 15Gb as unallocated space available for a new partition. Let the Solaris installer create this new partition automatically during install.
Timothy Madden,
Romania

How to install tamil fonts to read and write non pdf files

Hi,
i bought a new mac book pro...i want to edit my documents which are typed in vanavil avvaiyar a tamil font...but i dont know how to install it..and i hav a duobt that whether this mac may support tamil fonts in mac office.....

The Mac supports Tamil input Method and lists Anjal and Tamil99.
Microsoft Office probably does not.

How to install my ipod shuffle back and get down loads

how to install ipod shuffle

Are you shure this is an ipod shuffle, because the ipod shuffle dsent have a screen. If it is shuffle down load itunes on your computer, plug the headphone/usb that came with it into the ipods headphone port. Then connect the ipod into your computer and i tunes should recagnize it and walk you through every thing elese.

Qosmio G20 - How to install with one single HDD and without RAID?

I want to set up Qosimo G20 new with Windows XP 32.
I bought a new harddisk and put it into slot 1. I would like to run it without any RAID (so slot 2 is empty)
XP installation CD did not discover the HD
I entered BIOS to see if the HD was there - The HD is recognized normal
then I thought I have to change RAID to JBOD (page 3 BIOS) but this did not work
I confirmed it with the 1234 key - but nothing hapened.
In another task they said to install RAID-drivers (pressing F6... while starting XP installation)
I put the drivers on a USB-stick - but the system will not discover it (and there is no floppy drive)
I have no idea how to install XP on this Laptop.
Any hints?
Chris

>I put the drivers on a USB-stick - but the system will not discover it (and there is no floppy drive)
Win XP does not recognize USB flash memory while setup. This is possible since Vista OS so either you will need a USB floppy drive or you will built a new Win XP CD and will add the RAID driver using the nLite software.
Here is a nice FAQ how to add the RAID (or SATA driver) to using nLite.
http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
Note: this describes how to add the SATA drivers you have to add the RAID drivers so dont use SATA driver but RAID driver
Good luck

How To Install Invoke-SQLcmd2, Write-DataTable and Out-DataTable

I found Chad Miller's SQL Server PowerShell scripts Write-DataTable, Out-DataTable and Invoke-SQLcmd2. I can't find any information regarding how to install them though - everywhere I look they're referred to as a script and not a module so add-module wouldn't
work unless I'm missing something. Is there a module pack containing all three cmdlets available?
Thanks in advance
Adam

$profile
Will show you the loction
test-path $profile
Will give you a true or false if you actually have a file in there
new-item $profile -itemtype file -force
if false use the above to create one, from there you can open it up in notepad and edit it to include what you need.
THIS IS FOR ANYONE IN THE FUTURE WHO COMES A CROSS THIS THREAD AND DOESN'T KNOW HOW TO DO PROFILES
If this is helpful please mark it so. Also if this solved your problem mark as answer.

How to install the EUL5 Business Area and seeded reports for Ora Apps 11i

Hi All,
We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i.
I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to where to look foe the scripts would be really appreciated.
I am using disco version 10.1.2.48.18.
Thanks.

Hi,
You need to work though Metalink Note 313418.1.
Rod West

How to install Photoshop CS5 Extended Student and Teacher edition on a MacBook with no CD drive

I just recently purchased a MacBook, making the switch from PC to Mac, and I notice that my copy of PsCS5 Extended Educational edition, which is a CD, won't work on my MacBook because there is no CD drive. I even tried using my product key on a downloadable version of the same software but the best I could find is a non-educational version of the software and my product key won't work on it. How would I go about installing this on my MacBook without purchasing the $200 software again? Thanks in advance!

There isn't much good news to offer. The first mention below is probably your only shot without purchase, unless you could find someone to transfer licenses with.
You won't be able to install a Windows version on the Mac unless you install some Windows emulation software on the Mac.
You won't be able to activate a Mac version of the software on the machine because your license/serial number is only valid for Windows.
CS5 is too old to qualify for a platform swap and Adobe no longer sells CS5 so you would have to take your chances with a third party vendor if you decided to purchase a Mac version.
Just to clarify, there is no such thing as a student version of the software... the license dictates the status of the software. So you won't be able to find a student version either

How to install adobe photoshop elements 12 and adobe premiere elements 12 on a computer with no cd drive?

Hi
A few months ago I bought Adobe Photoshop elements 12 and Adobe premiere elements 12 to my old laptop. But a few weeks ago I had to buy a new computer and that one has no cd drive :S How can I install my programs on my new computer?
Thank you

There isn't much good news to offer. The first mention below is probably your only shot without purchase, unless you could find someone to transfer licenses with.
You won't be able to install a Windows version on the Mac unless you install some Windows emulation software on the Mac.
You won't be able to activate a Mac version of the software on the machine because your license/serial number is only valid for Windows.
CS5 is too old to qualify for a platform swap and Adobe no longer sells CS5 so you would have to take your chances with a third party vendor if you decided to purchase a Mac version.
Just to clarify, there is no such thing as a student version of the software... the license dictates the status of the software. So you won't be able to find a student version either

How to install the struts-el jar and tld file

How can i install/configure the struts-el jar and struts-logic-el.tld. When I tried with the related sites, i couldn't get any jar files for struts-el tag.
I got only 404 status error.
From where and how to get the jar file and tld file for the struts-el tag .Please refer me

The jar file is part of the download of struts.
its in the /contrib/lib directory
You should need struts, jstl plus the struts-el jar files.
The tld files should not be necessary - just use the standard URIs for them.
eg http://struts.apache.org/tags-logic-el

How to install WLS in Linux?

I have a file named weblogic700_linux.bin, and have chmod to 777, when i execute the command "sh weblogic700_linux.bin -i console", system told me "weblogic700_linux.bin: cannot execute binary file".
How can I install it? what's the precondition, such as jdk1.3 installed? JAVA_HOME varible?

Kadvin wrote:
> I have a file named weblogic700_linux.bin, and have chmod to 777, when i
> execute the command "sh weblogic700_linux.bin -i console", system told me
> "weblogic700_linux.bin: cannot execute binary file". How can I install it?
> what's the precondition, such as jdk1.3 installed? JAVA_HOME varible?
The installer is different in 7.0. Try,
./weblogic700_linux.bin -mode=console
Wayne

How to install an entire directory structure and files with the LabVIEW installer

I think I may be missing something on how to do this - preserve a file directory structure in the LabVIEW build process.
Is there an easy way to distribute an entire directory structure (multiple directory levels/text files) and have the LabVIEW build process properly preserve and install them? I included a directory in my build specification but it completely flattened the file structure and then so when the installer builds it, the resulting structure in the /data directory is flattened as well. I'd prefer not to go through each file (~100) and setup a specific target location. Is there an easy way to preserve the file structure in the build process/installer process that I am missing (maybe a check box that I didn't see or an option setting somewhere)?
-DC

Hi DC
Sorry for the delay in responding to your question.
You should be able to do this using a 'Source Distribution' as described below:
- Right click on 'Build Specifications' and select 'New' - 'Source Distribution'
- Provide a name
- Add your files to 'Always included' under 'Source Files'
- Under 'Destinations' select 'Preserve disk hierarchy' and ensure that 'Directory' is selected as the 'Destination type'
When building an installer your can then choose to include your source distribution and it will be installed to a location of your choosing.
Hope this helps.
Kind Regards
Chris | Applications Engineer NIUK

How to install OSX on 2nd HD and get rid of 1st HD?

(thanks to this forum) I managed to install a second HD on my MacPro (I have to specify that I'm degree below z-e-r-o in hardware...).
now, my second HD appears on the desktop (it's set for 1 partition in D.U.)
AND THE BIG QUESTION IS:
HOW CAN I INSTALL OSX ON THIS NEW DISK AND GET RID (once it's done) OF THE OLD CRAPPY SEAGATE HD?
I know that it can be 'cloned' (I've read about for that here on the forum) but, is this the best thing to do? or shall I restart from the original APPLE CD? but how to do that...?
thanks!

Why is your Seagate "crappy?" Is it not behaving well in some manner? Because if you were to clone, the exact software issues that it has would appear on the clone. If you simply erase and install on the second empty hard drive, none of the other hard drive's software issues would be present. However, I would make sure your data is backed up before installing anything, and attempt to isolate whatever issues you are having first. If there is nothing on the second hard drive, you can go ahead and install and find out if you have the same issues on that drive. Erase and install is one of the installation options from the installation disks included with your Mac Pro. Be careful not to erase and install your original hard drive unless you are totally backed up as my FAQ explains:
http://www.macmaps.com/backup.html
P.S. in case you didn't realize it, on the internet using ALL UPPERCASE means you are attempting to shout and be rude. Please avoid it so people don't misunderstand you.

How to install WLS 10.3.3 and OPFRD 11.1.1.2 + patch 11.1.1.3

Similar Messages

Maybe you are looking for