How to install X-Fi Autio Panel etc?

Hello Until recently I used windows XP, and after a clean install, I installed the updated XP audio driver from creative site, then the programs (Console Launcher, Audio Panel, THX options and whatelse I chose from the list). However, now I use windows 7, and I can install the driver fine, but when I try to click setup from the CD to install the applications I did with XP, I get a message that the windows OS running on this computer is not supported by this product. I have searched if I can download the applications or CD content from creative download page, but did not find it, not for 7 and not for XP. So how do us windows 7 users, can install the cd content if we can't install nor from the cd nor download the cd content? Thanks

I forgot to mention
X-Fi XtremeGamer
I couldn't find under "Applications" anything that installs volume panel and thx options like the CD does.

Similar Messages

Trying to find out how to install plugins from Adobe exchange in my Indesign CS5

I click on the install button on the exchange website, then I get a window going to my plugin folder in Indesign CS5 but there is the selection button is gray out. Also I was asking if the upgrade from CS5 to CS5.5 is a free upgrade or you have to pay for it?
I wa also asking how to install the overlay creator panel into my CS5?

Right click on any track in iTunes and choose Get Info from the menu. In the window that opens choose the Info tab.

How do I retrieve the tone panel in Lightroom 5 (with the sliders for exposure, contrast, vibrancy etc which sits under the crop, red eye etc icons)

How do I retrieve the tone panel in Lightroom 5 ( with the sliders for exposure, contrast, vibrancy etc which sits under the icons for cropping, red eye etc)?

On a PC, right-click (Mac Cmd-click) on one of the other panel headings such as Tone Curve, Detail, etc. In the context menu that displays, make sure there is a checkmark in Basic. Another quick way to do it is Ctrl->1 or Cmd->1.

How do I update my newly installed CS6 products (illustrator, photoshop, etc)?

How do I update my newly installed CS6 products (illustrator, photoshop, etc)? I'm sure some of these have been updated since the installation disk was produced.. I need the latest versions for CS6, not the Cloud.

you can usually open a program and click help>update..
or you can update manually, Product updates

I had to re-install firefox, how can I get all my addons etc

I had to get my PC repaired so I just re-installed Firefox. How can I get my add-ons etc. I thought that when I logged in all my stuff would show up.

If you were using Firefox Sync, then you can sign into Firefox Sync again to get everything back: [[How do I set up Firefox Sync?|How do I set up Firefox Sync?]]
If you were not using Firefox Sync, but you have a backup of your user profile, then you can restore from a backup: [[Back up and restore information in Firefox profiles|Back up and restore information in Firefox profiles]]

How to install Windows 8 on Mid 09 Macbook Pro (10.8.3)

So i loved the new Windows 8, and even had it installed before bootcamp supported windows 8 on my new iMac, i waited to buy a bigger hard drive and more ram for my mid 09 Macbook Pro. The day i bought the new hardware, Apple released 10.8.3, and an updated bootcamp to support Windows 8! Yay! I got my install disc out (iso file burned to DVD), opened up bootcamp assistant, only to get an error saying apple dropped support for my mid 09 Macbook Pro and Windows 8. Making the install impossible through bootcamp. Do not fret, i have the solution, and EVERYTHING works perfectly. Here we go.
Gather your Windows 8 install disc AND a Windows 7 install disc (you can surely find one by searching the net, use your old one, or borrow a colleagues... we are licensing Windows 8, NOT 7, this is just for my trick to fool bootcamp assistant and no i do not condone piracy)
Inside BootCamp Assistant, the driver download may hang,it did for me, twice..could be heavy usage due to the popular new update...so i recommend downloading it faster, and manually here http://support.apple.com/downloads/#macoscomponents and get 4.1.4586 yes this is for windows 7, ALSO while you are there, download the windows 8 support pack 5.0.5033, as we will need that later as well. As a matter of fact, DO IT THIS WAY and dont bother
That being said and done, in BootCamp Assistant (OSX), only check off Install Windows 7, leaving the download support software unchecked
Partition your hard drive as youd like, this splits up your storage space however you like, keep in mind which OS you plan to run the most, and obviously give that one more room, i.e you do all your Photoshop work, and app development in OSX, and only use Windows for office stuff, you'd want to give yourself more room on the OSX side. I however bought a huge new internal drive to split them basically in half, as i use them both frequently.
This step is where the trick comes. OSX 10.8.3 / BootCamp will advise you there is no support for Windows 8..only 7 with your Mid 09 Macbook Pro if you have put your Windows 8 disc in, upsetting you as it did me...possibly bringing you to this post, thats not FAIR is it? Your 09 MacBook Pro is still JUST AS GOOD as a lot of PC's running Windows 8, why they excluded this model i have no idea...im sure they had reasons, but i dont care at the moment..lol
INSTEAD place a Windows 7 install disc in, and click next. BootCamp Assistant will now partition your drive, make the windows side bootable and restart your MBP.
Let it do its thing, and eventually you will land at the Windows 7 installation interface. We don't really want that, we want Windows 8 right?
Click the "x" to close the installation for Windows 7, it threatens your MBP will restart, and allow it to do so.
**IMPORTANT** Once you hear the beloved Mac chime, quickly press and hold the "option" key.
This brings you to an area where you can select a startup disk. At this point, lets get rid of the trick. Hit your eject button and get rid of the Windows 7 install disc, we are done with it now.
You now, well in my case anyway, should only see your Mac HD, and the Recovery Disk.
Insert your Windows 8 install disc
Now WAIT. Eventually, you should see a new DVD looking icon that says Windows pop up next to the MacHD and Recovery Disk. (depending on what you called your iso, it may something else...not sure, but you cant miss the new entry)
This is where a wired mouse will be needed, or use tab/space/enter to navigate to the new Windows Disc icon and launch it.
You are now in Windows 8's installation interface, cool!
Follow the steps until it asks you where you want to install it. You should see a partition about equal to what you set earlier in BootCamp Assistant, and it SHOULD say Bootcamp right on it. Select this partition. (mine was the last one, the fourth i believe)
OH NO, it says you cant install it to that partition, this is normal. You need to highlight/select this partition, and click format. I cant remember, but i think you have to click "options" to get to a the spot where you can format it. Pretty straight forward. Safety check, obviously make sure you have the Bootcamp partition selected, dont format your Mac OSX partition!
After the quick format is done, Windows 8 installer will then allow you to click "next" and from there the magic happens.
Go through the whole Windows 8 install, and setup how you would like, this takes awhile, and im not covering that, as its a hand in hand walkthrough like any other install.
Once your inside your new Windows 8, you'll see a bunch of things not working, like tap to click on your trackpad, no on screen displays for brigtness, volume, and possibly other stuff. Not cool right?
Grab your USB stick, or Burnt disc that you applied the bootcamp support downloads to in the begining of this tutorial.
FIRST open the Windows 7 Bootcamp install, 4.1.4586, open the folder and find setup.exe and run it (we are in windows 8 now)
It takes a while, but Apple's BootCamp will install a bunch of drivers, etc, and eventually restart your MBP, which is cool, let it do it.
Upon finishing, lets go back to the USB/Burnt Disc where all your support software was saved, and lets get the newly support BootCamp 5.0.5033 opened up.
Big Thanks to a post by ErikVanD i seen on this forum for the next step.
If you want, try and click setup in this latest BootCamp support set, and you will get another sad error claiming x64 is not supported, something awful to that nature. Awww man, this far, only to get let down. Nope. We are going to fix that. And this is where ErikVanD's post pointed me to what we do next.
It was said to navigate in the BootCamp 5.0.5033 folder to something of the effect of BootCamp/Drivers/Apple and run the MSI file "BootCamp" (MSI file will say Windows Installer in its description, and not necessarily MSI for anyone not too savy with Windows) **note - NOT .bootcamp (notice the period in the front) and it should work and install the new Windows 8 support for your MBP...but in my case it didn't, which is why im posting how i fixed this. Your setup may somehow be different, but mine gave me an error say it "needs elevated permissions to run, use setup.exe instead. We tried that remember! And it gave us the x64 not supported error. Oh man! Blabbing aside, this file needs to be ran as an administrator, which yeah your the only user, but Windows is funny like that. Normally youd just right click, and select run as administrator, but out the box, that option isnt there when you right click, only install, repair, open with etc. Here's the next trick, you need to add a registry file to enable running as an administrator, dont be afraid, this is an old trick, and really easy.
Open notepad in Windows, and create a new doc, call it Add_MSI_run_as_administrator.reg
Paste this following code into the new doc
Windows Registry Editor Version 5.00
HKEY_CLASSES_ROOT\Msi.Package\Shell\runas] "HasLUAShield"="" [HKEY_CLASSES_ROOT\Msi.Package\shell\runas\Command] @=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\    00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\   73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\   00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Or download the file already made from my company server at http://www.theprojectdev.com/public/pub.html **i put this there as a courtesy to help others like me, its just a complete reg file, so either create your own through copy and pasting above or download it. Either way, put it on your desktop.
Now double click the new registry file, and allow/ok it to do its thing.
Once done, you can discard the file from your desktop, or keep, your choice.
Guess What!? Now we can do the impossible! Lets revisit that solution from before by going to the newest BootCamp 5.0.5033, and navigate to BootCamp/drivers/Apple and select that tricky BootCamp MSI file that wouldnt allow us to run, this time RIGHT CLICK it. Because of our new registry entry we placed, we now have an option to "Run as Administrator" Click that option.
WooHoo! We have done what coudnt be done, BootCamp will now walk you through the installer, and add all the great support for Windows 8 on your mid 09 Macbook Pro that they for some reason neglected!
After the update, you will endure yet another restart. From there, most likely using a wired mouse still, navigate to the system tray icon on the bottom right corner of the screen (little up arrow) and click it. It will pop up a little menu, showing system processes/stuff running, click the gray squared diamond (this is bootcamp) and it will bring up the newest BootCamp control panel. From here, you can nav to trackpad/touchpad and set tap to click (finally) and gestures, etc. This control panel has lots of good stuff to make a MBP user feel comfortable in Windows 8. There you go! You did it!
I really, sincerely hope this helps someone, as it really made my day to get this resolved. I want to add that all On Screen Displays will work (your volume/brightness etc) they keyboard backlighting, and so much more, it really works great. I upgraded my hard drive to 1tb, and installed 8gb of PNY RAM from best buy ($40) and it runs Windows 8, AND OSX fantastically.
My company http://www.theprojectdev.com designs and develops mobile apps (iOS and Android) and web design and development, so im a heavy user of both OS's, and this setup is just the best thing that has happened to me in a portable sense. Runs so so so fast! Enjoy everyone!

**********************IMPORTANT EDIT TO THE TUTORIAL***********************************************************
Everyone im sorry, i made a mistake informing you which BootCamp support drivers to download from Apple. You see I originally downloaded my Windows 7 Support from the BootCamp Assistant, and had the version number completely wrong.
The first BootCamp install packahe you should down load from http://support.apple.com/downloads/#macoscomponents is actually 4.0.4033
That will be your first BootCamp installation in Windows 8 that works. Im so sorry Markeez for wasting your time, my excitement had blinded me last night.
Also be sure to copy both 4.0.4033's folder and the latest 5.0.5033 folders to your Windows 8 desktop as well, dont run them off your USB stick or DVD/C, whatever media you copied them to.
So Markeez, after you download the correct Windows 7 Support Software 4.0.4033, simply click setup.exe and it will run without any trouble.
Then after the inital BootCamp install is complete, your MBP restarted and all is done, you need to perform the "Run as Administrator" trick i posted above. Its real easy. Open notepad, and copy the EXACT code i posted in the tutorial in a fresh new doc, and save the file to your desktop EXACTLY how i posted it Add_MSI_Run_as_administrator.reg
Now close notepad, and double click the newly created registry file, and allow it access to do what it needs. What this does is allows your run the new installer in BootCamp 5.0.5033 as an administrator, which you wont have the option to unless you use this registry file.
Ok after the registry part is done, go inside the latest BootCamp 5.0.5033 folder, to BootCamp/drivers/Apple and find BootCamp --- probanly the ottom most MSI file, and again it will not say MSI on the right side, it will say Windows Installer or something to that degree. Also do NOT confuse it with a similar file in that folder called .bootcamp this is not the one we need.   OK, so now, using a WIRED MOUSE, right click the BootCamp MSI file, and you will now have the option to Run As Administrator, if you did the registry bit. IF YOU DIDNT do the registry bit, you will only see Install, Repair, Uninstall etc. If thats the case, just download the zip from my company site, it contains only a completed copy of that reg file.
Running this file in the Apple folder as an admin is the key to making this work, let me know if you have any further issues, im watching. Also i apologize everyone, but for some reason i cant edit the tutorial to fix my mistake, very sorry about the confusion.

How do I make the "Find Panel" (Ctrl-F) more ME friendly?

After quickly resolving and only recently glitch in an older Firefox version (17.0.1) concerning stubborn restore of last sessions upon start up, using now version 27.0.1, I am now frustrated with the Find Panel (using Ctrl-F). How do I revert the Find Panel to older (not to mention MORE PRACTICAL!) version? If a visualization is actually necessary, I found a link that may be helpful: http://s11.postimg.org/qsc5piwr7/ff_find.png .
Focusing ONLY on the Find Panel, the version I am looking for is on
the top, while the newer (not to mention INFERIOR!) version can be
found on the bottom.
If I have to get another version, please let it also be able to use the Norton Toolbar, but I would much rather be given the instructions on how to simply edit the version I have now (27.0.1) so as to change only the Find Panel as I described above.
If you noticed, I'm getting super frustrated and also very picky, but as things Mozilla, Google, etc. go on, making what I suppose they call "progress," they all start to diminish in their functions. I'm not looking for a special looking internet browser, but one that works, user friendly, ME friendly. If Firefox has a few bugs to work out, work `em out, but for heaven's sake, stop altering the orientation of tools in the browser, rendering it far less practical than its wiser ancestral versions. I digress though . . .
I'm using Firefox 27.0.1, extremely loathe the Find Panel (Ctrl-F), how can I switch to an older and
better Find Panel (while at the same time also maintianing compatibility for Norton Toolbar)?
http://s11.postimg.org/qsc5piwr7/ff_find.png

Try the following style in Stylish. It's a fair approximation of the previous appearance.
* https://addons.mozilla.org/firefox/addon/stylish/
Once Stylish is installed, open the Add-ons Manager (Ctrl+Shift+A), User Styles category. Click the Write New Style button at the top and paste the following in it. Give the style a name and click the Save button.
<pre><nowiki>@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
.findbar-closebutton {
-moz-box-ordinal-group: 0 !important;
margin-left: 0px !important;
margin-right: 7px !important;
.findbar-textbox {
-moz-box-ordinal-group: 0 !important;
.findbar-find-next {
-moz-box-ordinal-group: 0 !important;
border-left-width: 0px !important;
border-radius: 0px !important;
.findbar-find-next label:after {
content: "Next" !important;
margin-left: 4px !important;
.findbar-find-previous {
border-right-color: rgb(160, 160, 160) !important;
border-right-style: solid !important;
border-right-width: 0.8px !important;
border-radius: 0px 2px 2px 0px !important;
.findbar-find-previous label:after {
content: "Previous" !important;
margin-left: 4px !important;
.findbar-container > spacer {
display: none !important;
}</nowiki></pre>
The Alt+N and Alt+P keyboard shortcuts no longer work for finding the next and previous occurrence, respectively. You can use F3 or Ctrl+G and Shift+F3 or Ctrl+Shift+G, respectively.
If you want the find bar to remain open when switching tabs, you can use the FindBar Tweak add-on.
* https://addons.mozilla.org/firefox/addon/findbar-tweak/
If you want to submit feedback or suggestions, open the Help menu — either from the orange Firefox button or the menu bar — and choose Submit Feedback. This is a support forum and your comment may not get noticed here.

Cant figure out how to install vcenter, or even what OS it requires, help!

Unfortunately, the excellent vsphere windows client has now been discontinued (or at least we assume it has because we get error message "you have restricted editing capabilities on a virtual machine of version 9...). So now we have to figure out how to get the web client.
We don't want to install vcenter, due to the unnecessary complexity and cost, but it looks like we have to.
Unfortunately, I cant find out how to install vcentre - I found a page with the prerequisites, but It didn't mention the most important piece of information - what OS it needs, nor how to actually install it from the iso.
We are using vmware essentials kit on a single host. We dont have any windows server licenses, so if vcenter requires this, vmware is out, unfortunately.
what OS is required for vcenter
is vcenter free?
Do we need vcenter or vcenter server, or are they the same?
how do we get it?
How do we install it?
How do we access the web panel?
Where is the documentation? We have spent some considerable time looking for it. The nearest is this page:VMware vSphere Documentation which is for vsphere, not vcenter, and only includes info about the vcenter appliance. On this page is a documentation link to the right, but vcenter is not included in the list of products - its like it doesn't exist.
Why do vmware make it so hard to use vsphere now? Why doesn't sphere simply come with vcenter, as it cant work without it now, or at least offer it as an option when installing vsphere. It must be a show stopper for many people like us who want to evaluate vmware to virtualise a hand full of non HA environments, but get stuck at this point.

Just to clarify, vSphere is a suite of products that includes vCenter, ESXi (The hypervisor) and a whole range of other products.
There is a free version of the ESXi hypervisor but it is limited in features and you get basic management options, no vCenter server to manage multiple hosts so you can't use HA, vMotion, DRS etc etc
The reason for the lengthy installation documentation is that customers have a wide range of requirements, however most will probably opt for the "simple install" option!
Documentation wise, I prefer the HTML version which you can easily search / browse: vSphere 6.0 Documentation Center
1) vCenter requires Windows Server, however you can also use the Linux appliance, saving a windows license. This is much improved in recent years however is still missing some functionality such as Update Manager that some customers will use.
2) No, you need a license for vCenter, it manages your ESXi hosts and manages your virtual environment. See: Compare VMware vSphere Editions and Kits Comparison | United States
3) vCenter / vCenter server are the same thing
4) You need to purchase it, or use a free 60 day evaluation
5) As per the documentation above. The simple install is your best option to get it instaled in 30 minutes, or try the appliance version (Import it onto a host, boot and follow the instructions, database is included, very easy to deploy and no additional licensing costs)
6) Via https://vCenter-Hostname:9443
7) As above

How to install an older instrument driver (GPIB) LV2009 eval, 23 days remaining!

Hi..
Still having fun (I think) here trying to "evaluate" LV2009.
I'm sort of happy with the higher level stuff, front pannels, block diagrams, flow control with error signaling etc, so now time to move on and try to talk with the real world.   The Front Panel development UI is a bit of a dog, but I'll live with that.
Anyway...
I have a Marconi 6960 RF power meter (and similar kit) I can use for this "evaluation" and have found a so called driver in the NI developer zone some(i forget)where. It's a zipfile (no problem) with 4 files in. .c .h .fp and .doc    Sadly, the .doc though documents the functions of the driver, gives me no clue as to how to install it in LV2009. It also talks about LabWINDOWS V2.0, and dates from 1997.
(As an asside, most of what I will have to do, will relate to "older" or "Legacy" GPIB or RS232 connected instrumentation, and maybe one or two USB toys. There is no choice, LV is expensive enough if we go this route. But it's not even peanuts compared to the value of some of the instrumentation it will need to work with.)
Looking arround this board, I'm not realy any the wiser as to what to do with it. (This downloaded "driver" code.) It obviously needs compiling, but with what, and then integrating in LV2009, but how?
I found a link in one sort of related message, something about a driver import wizard, but the link is blocked by some spotty IT type this end, so that is of no help.
The inbuilt help from within LV2009 is sufficiently vague, or over complicated as to be of little use too.
What I need, is a simple, put that there, do this, do that type of procedure.
Again, stumped by simple details, and this is the area I will probably be spending most of my LV life in, from what's being muttered about "upstairs" in the big boss's office earlier.
Any help appreciated.
Regards.
DJB.
Just been "diverted" onto a hardware repair job, so no hurry, for now.
OK... Who let the smoke out?

Hi Dennis.
Yes, I found that page (and many others) but the info there is sufficiently vague, or so OTT for someone who does not know their way arround the darker recesses of LV (yet) to figure out.   It tells me a lot, but it does not tell me in sufficient detail *exactly* how to install a driver that someone else has created, or for that matter, how to find out what "Drivers" are installed already.
As you or someone pointed out, that code was also written way back for another system "LabWINDOWS/CVI" (whatever that was) but it shows up when you search for "Drivers for LabVIEW". It is also listed as supported by LV7.0 and LV8.0.   Those IDN pages also do not yet (that I can see) make any mention of LV2009. Is it just me that sees this as somewhat inconsitant and confusing for a new user, when NI are pushing LV2009 at this time?
Someone is now going to tell me that reusing existing older drivers *is* straightforward, but will be vague as to exactly how.
The only "exposure" to LV we've had here in the past/present, is as users of pre-compiled tools and utilities from some of our principles. And it has to be said, all of them are without exception, extreemly buggy, so much so, I personally wouldnt say they were fit for even internal Beta testing, as they don't handle "unexpected events" at all well. And some of these utilities could if they screw up, seriously damage hardware in some instances.
We've also found many many times, that anything using "VISA" IO drivers (that word again) is almost garanteed to be troublesome to get or keep working, especialy as one lab/workshop PC might have tools and programs from several vendors on it, and they must all work indipendantly when needed (not at the same time!) without interference from other vendors code or preferences. For some reason, VISA seems to make that all but imposible.
We have a situation at the moment, where we suspect a "Clash of the VISA's" as we can't reproduce what a customer has reported in the way of bad behaviour of a semi automated test system, but we see other errors relating to the serial IO used, throwing up internal LV runtime error messages, and blank spaces where the *Real meaningfull* comments should be. It's all pre-compiled code, so we have no way of supporting or debugging it, but try tell the end user that, who's test facility is now at a standstill, untill I can call the East coast USA later today (from the UK) not that I expect a constructive reply till sometime tomorrow, at best. By then, there'll be Director to Director phone call's going on!
I've also just been informed, that the workshop PC in question, will not now run something else we need, since we earlier installed the program the user is using (made by the instrument vendor) and all it's baggage, so yet another "Fixit" re-install of VISA (this time from Agilent) is needed to complete another job, and that in turn will break something else. It's a nightmare!
Sorry, but in my book, VISA is a no go for "Serious" multi vendor use. It's too fragile. In our industry (EMC and product safety testing) "Legacy" GPIB rules, almost without oposition. USB and LAN connections may be alternatives where the instrument supports them. With some true RS232 point to point low speed dedicated links where needed (often via passively powered fibre optic convertors too) for some measuring instruments.
But, at this time, all I want to do, is talk/control a simple existing GPIB instrument (a MI 6960, that I know all too well) and I thought (wrongly as it turns out) that I had found a needed "Driver".   If I have to create one from new, I will, one way or another.   But it makes a mockery of the so often quoted aspect of LabVIEW, being quick to construct and deploy a test/trial/control system etc, with an existing vast library of tried and tested instrument/device drivers. From what I see so far, it's anything but, as it's in the same ball park as all the other RAD IDE's etc (Even Delphi!) in that respect. The devil is in the detail, and if that detail as often does not exist, it's a task and a half to create it, and get it right.
Sorry if I ruffle any feathers, but I've been arround RF test & instrumentation systems at the hardware and software level for more years (decades) than I care to admit. Each and every time someone comes up with a "better" way to do something (usualy involving even more computing power!) It's anything but quick and easy, and the end result is in all honesty, not realy different to how it was done, before "enforced newness" was applied.
Regards to All, I've still got the day job to do, so sadly I can't sit in front of this and mess with software all day. Much as I need to, and often would preffer to!
DJB.
OK... Who let the smoke out?

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

How to install ovi suite to a drive other than C:?...

how to install ovi suite to a drive other than c:??? my c: drive is almost full with other partitions perfectly free to install it, how do i do that? can i use previous versions of ovi suite to use with my e63? at this point, i'm unable to use ovi suite at all, because there's no room to install it on my c: drive.
allllllllso there's one more thing, when i originally had tried installing ovi suite on my computer i had more than 1gb free. after installing it i on'ly had 500mb free. i had only intended for it to use a very small amount of space, and since i also use my c: drive for virtual memory i quickly uninstalled it, looking for an option i'd maybe skipped over while installing it the first time. no luck. anyways, when i looked in the add/remove programs control panel the installed size of ovi suite was only 40-50mb. even after uninstalling ovi suite the extra memory space that seemed to all of a sudden taken up by the installation stayed used.
when looking at the file sizes of everything on my hard drive, (including system files and paging file) there is still a descreprency between the amount of memory used and the size of all files total on the drive. at this point im quite disgusted and disapointed in ovi suite as i'm mostly unable to use it to connect my phone to my computer and i'm also having problems with the CA101 cable as well. i guess i'll have to go check for another cable.
nokia!!! wake up and fix yo **bleep**!!!!
anyone have any solutions for the main problem? (installing to a drive other than c? is there support for this option in any of the new beta versions? can that be included in the newest betas? i'm suuuuuure i'm not the only one begging for this option!!!

Hi ostrenga4, sorry to hear about your experiences.
When installing Nokia Ovi Suite to PC, Windows makes "system restoration points", which are available to restore operating system to previous condition, if something goes wrong, for example in driver installation.
You can change install location of Nokia Ovi Suite with following:
- Download Nokia Ovi Suite install package from Nokia Ovi Suite pages
- Start Windows Command prompt
- From Command prompt, navigate to folder containing Nokia Ovi Suite install package, which you downloaded
- Start Nokia Ovi Suite install package with command line "Nokia_Ovi_Suite_webinstaller.exe /TARGET="D:\TestDir\Test"
- This results, that Nokia Ovi Suite installer creates folder D:\TestDir\Test (if that doesn't exist) and installs Nokia Ovi Suite there.
- Unfortunately, Windows Installer still keeps installer cache files and system restoration points in C: drive (or whatever your system drive is)
As you can see, this is possible, but it is very much recommend to have enough space for installing software into system drive.
Cheers, Samuli

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

How to install Adobe AIR 2.6 on 64-bit Debian jessie?

After many tries, TourDeFlex has not yet been installed on 64-bit Debian testing edition. Here is part of the Install.log
[Adobe AIR Application Installer:7503][INFO] Application Installer begin with version 2.6.0.19170 on Linux x86
[Adobe AIR Application Installer:7503][INFO] Commandline is: /home/alisa/Downloads/TourDeFlex.air
[Adobe AIR Application Installer:7503][INFO] Installed runtime (2.6.0.19170) located at /opt/Adobe AIR
[Adobe AIR Application Installer:7503][INFO] Unpackaging file:///home/alisa/Downloads/TourDeFlex.air to /tmp/FlashTmp.29yCCI
[Adobe AIR Application Installer:7503][INFO] Application signature verified
[Adobe AIR Application Installer:7503][INFO] Unpackaging/validation complete
[Adobe AIR Application Installer:7503][INFO] No app located for appID 'TourDeFlex' and pubID 'E7BED6E5DDA59983786DD72EBFA46B1598278E07.1'
[Adobe AIR Application Installer:7503][INFO] Cancel request received
[Adobe AIR Application Installer:7503][INFO] Application Installer end with exit code 6
Actually, all air applications can not be installed so far, including TweetDeck etc. How can I fix this problem?

Chris,
Your suggestion to use Windows Installer CleanUp Utility to solve my problem worked! Many thanks for the suggestion.
For anyone who wants to use Windows Installer CleanUp Utility: Microsoft no longer supports this utility and you will no longer be able to download it from their site. I found a copy of it at:
http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.sh tml
Please note that after you install it, you will have to go find it in Start -> All Programs (Windows XP), launch it, select Adobe AIR, and click the Remove button.

How to install and use certificates on client?

Hello everyone, and first of all sorry for my poor, italian-accented english.
I have some questions about SSL and certificates. I'm developing a java desktop application, which should connect to a https server, authenticate with a previously downloaded certificate and then gain access. Some specs: I work on a Windows Xp Pro machine with Netbeans 6.1 and jdk 1.6.0_07.
Now, I'm using HttpUnit libraries to connect the first time, login with basic authentication and download the certificate, but after i get it I'm not sure how to install the certificate (using java, it has to be an automated procedure) on the client machine and then how to use it to connect to the server. I've tried to use the code I've found here and after using it I can see the certificate inside Control Panel > Java > Securiy > Certificates > System, but I'm not sure I'm installing it in the correct way and/or in the correct path.
Everytime I try to connect to the server I get back a HTTP 403 forbidden exception. Does someone know any tutorials/howtos/example codes to suggest to me? Or could tell me what's the right installation procedure using java? Any help would be very appreciated.
Thanks in advance
K.

After banging my head on my keyboard for a lot of hours, I've got it!
I was trying to install a *.pfx certificate, and that was bad. I tried to convert it in *.p12 or *.cer but that workaround didn't work. Finally I've found a small code to use a *.pfx certificate without installing it and... it works! No more 403 errors now, I can get that damn page. :)
Here is the class I've used (I've found it somewhere googling around but I've lost the link, sorry. Anyway, I've modified it a little)
import java.io.BufferedReader;
import java.io.FileInputStream;
import java.io.InputStreamReader;
import java.net.*;
import java.security.KeyStore;
import javax.net.*;
import javax.net.ssl.*;
public class ConnectWithPfx {
   static final int HTTPS_PORT = 443;
   public static void main(String argv[]) throws Exception {
      // Get a Socket factory
      SocketFactory factory = SSLSocketFactory.getDefault();
      SSLSocketFactory socketFactory = null;
      try {
            KeyStore keyStoreKeys;
            KeyManagerFactory keyMgrFactory;
            SSLContext sslContext;
            keyStoreKeys = KeyStore.getInstance("PKCS12");
            keyStoreKeys.load(new FileInputStream("mycertificate.pfx"),"certpassword".toCharArray());
            keyMgrFactory = KeyManagerFactory.getInstance("SunX509");
            keyMgrFactory.init(keyStoreKeys, "certpassword".toCharArray());
            sslContext = SSLContext.getInstance("SSL");
            sslContext.init(keyMgrFactory.getKeyManagers(), null, null);
            socketFactory = sslContext.getSocketFactory();
            Socket socket2 = factory.createSocket("www.my.host", HTTPS_PORT);
      } catch (Exception e) {
            e.printStackTrace();
        URL url = new URL("https://www.my.host/mypage");
        // Open a HTTP connection to the URL assigning the SocketFactory we created before
        HttpsURLConnection conn = null;
        conn.setDefaultSSLSocketFactory(socketFactory);
        conn = (HttpsURLConnection) url.openConnection();
        // Allow Inputs
        conn.setDoInput(true);
        // Allow Outputs
        conn.setDoOutput(true);
        // Don't use a cached copy.
        conn.setUseCaches(false);
        conn.setRequestProperty("Connection", "Keep-Alive");
        BufferedReader in = new BufferedReader(new InputStreamReader(conn.getInputStream()));
        String line;
        String response = "";
        while ((line = in.readLine()) != null) {
            response += line+"\n";
        System.out.println(response);
}Hope this could be useful for someone else. Thanks to everyone who read or replied to my thread. :)

How to install Creative Cloud on any drive other than my System drive...

You are now chatting with 'Bhagawan'
Bhagawan: Hello. Welcome to Adobe Technical Support.
Bhagawan: Hi Steve
Steve: It appears CC installs on my system drive without asking me. The way I manage my system - this is not acceptable. So, how do I install on the drive I install all my other apps?
Bhagawan: I understand that you want to install Creative Cloud desktop app. Am I correct?
Steve: On a particular drive - not my system drive.
Steve: CC, Photoshop, etc.
Bhagawan: I will be glad to check and help you with this issue.
Bhagawan: Steve, creative cloud desktop app can be install only on C drive, but other apps you select for other drive.
Steve: My C: drive is dedicated to my OS only.
Steve: It is a special drive that will not work for very long if software companies put their programs on it till it fills up and then everything stops.
Steve: Didn't Adobe think of this?
Steve: I have one computer that only has a few MBs left of C:. What do I do on that computer?
Steve: "left on C:"
Bhagawan: Give me a minute.
Bhagawan: Thank you.
Bhagawan: Steve, I'm really sorry, creative cloud desktop app will be installed on C Drive, since the operating system is installed, but other Creative Cloud apps can be installed other Drive and depends on file size.

I had the same problem and finally solved it.
It is "funny" that CC doesn't ask you where to install apps. Or better to say, it asks you but doesn't care. In Creative Cloud desktop app/Preferences there is option to choose where you want apps to be installed, but they are still installed in C:/Program Files/....
How to install apps on secondary drive in just 3 steps:
1. Go to page Adobe CC 2014 Direct Download Links – Creative Cloud 2014 Release | ProDesignTools and download all apps that you will need.
2. Once downloaded, install it. During installation you will be asked where you want app to be installed (just like in any other "normal" installation)
3. Be happy
Hope I helped
Marko

How to install X-Fi Autio Panel etc?

Similar Messages

Maybe you are looking for