How to install x6541 Dual Diff SCSI card on Ultra 10-
HI
I am new to unix.I need to connect Ultra 10 with Disk array D1000. I want to install x6541 375-0006 (VHDCI 68 pin) Dual Diff SCSI card on ultra 10.I can't find any DOC to configure this card.
Need help please.........Thanks
Hello Jay,
<i>I want to install x6541 375-0006 (VHDCI 68 pin) Dual Diff SCSI card on ultra 10.I can't find any DOC to configure this card.</i>
Just insert the card into a slot. If the system automatically boots, login as root and issue the command <b>devfsadm</b>.
If it stops at the <b>ok</b>-prompt, issue (after attaching the D1000) the command <b>probe-scsi-all</b>. Does it display the disks in the D1000 ? If successful, boot the system with <b>boot -rv</b> (tells the Solaris that the configuration has changed and displays verbose messages during boot).
How to attach the cables and terminator to the D1000 is described in the D1000 documentation under <b>Related Documentation</b>.
<b>Sun StorEdge[tm] D1000 Array</b>
Michael
Similar Messages
-
I've added a Diff SCSI card to my V210 before I racked it and haven't looked into it since.
Is there a way to tell if the system already see's it. What would I look for.
It is a X6541A dual diff scsi card.Thanks for the info...
There only one slot available so I assume that is is id as PCI0 as...
pci 33 PCI0 scsi-pci1000,f (scsi-2)
okay /pci@1d,700000/scsi
pci 33 PCI0 scsi-pci1000,f (scsi-2)
okay /pci@1d,700000/scsiOutput from prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Fire V210
System clock frequency: 167 MHZ
Memory size: 4GB
==================================== CPUs ====================================
E$ CPU CPU
CPU Freq Size Implementation Mask Status Location
0 1002 MHz 1MB SUNW,UltraSPARC-IIIi 2.4 on-line MB/P0
1 1002 MHz 1MB SUNW,UltraSPARC-IIIi 2.4 on-line MB/P1
================================= IO Devices =================================
Bus Freq Slot + Name +
Type MHz Status Path Model
pci 66 MB pci108e,1648 (network)
okay /pci@1f,700000/network@2
pci 66 MB pci108e,1648 (network)
okay /pci@1f,700000/network
pci 33 MB isa/su (serial)
okay /pci@1e,600000/isa@7/serial@0,3f8
pci 33 MB isa/su (serial)
okay /pci@1e,600000/isa@7/serial
pci 33 MB isa/rmc-comm-rmc_comm (seria+
okay /pci@1e,600000/isa@7/rmc-comm@0,3e8
pci 33 MB pci10b9,5229 (ide)
okay /pci@1e,600000/ide
pci 66 MB scsi-pci1000,21 (scsi-2)
okay /pci@1c,600000/scsi@2
pci 66 MB scsi-pci1000,21 (scsi-2)
okay /pci@1c,600000/scsi
pci 33 MB pci108e,1648 (network)
okay /pci@1d,700000/network
pci 33 MB pci108e,1648 (network)
okay /pci@1d,700000/network
pci 33 PCI0 scsi-pci1000,f (scsi-2)
okay /pci@1d,700000/scsi
pci 33 PCI0 scsi-pci1000,f (scsi-2)
okay /pci@1d,700000/scsi
============================ Memory Configuration ============================
Segment Table:
Base Address Size Interleave Factor Contains
0x0 2GB 4 BankIDs 0,1,2,3
0x1000000000 2GB 4 BankIDs 16,17,18,19
Bank Table:
Physical Location
ID ControllerID GroupID Size Interleave Way
0 0 0 512MB 0,1,2,3
1 0 1 512MB
2 0 1 512MB
3 0 0 512MB
16 1 0 512MB 0,1,2,3
17 1 1 512MB
18 1 1 512MB
19 1 0 512MB
Memory Module Groups:
ControllerID GroupID Labels Status
0 0 MB/P0/B0/D0
0 0 MB/P0/B0/D1
0 1 MB/P0/B1/D0
0 1 MB/P0/B1/D1
1 0 MB/P1/B0/D0
1 0 MB/P1/B0/D1
1 1 MB/P1/B1/D0
1 1 MB/P1/B1/D1
============================ Environmental Status ============================
Fan Status:
Location Sensor Status
F0 RS okay
F1 RS okay
F2 RS okay
F3 RS okay
MB/P0/F0 RS okay
MB/P0/F1 RS okay
MB/P1/F0 RS okay
MB/P1/F1 RS okay
PS0 FF_FAN okay
Temperature sensors:
Location Sensor Status
MB/P0 T_CORE okay
MB/P1 T_CORE okay
MB T_ENC okay
PS0 FF_OT okay
Current sensors:
Location Sensor Status
MB FF_SCSI okay
PS0 FF_OC okay
Voltage sensors:
Location Sensor Status
MB/P0 V_CORE okay
MB/P1 V_CORE okay
MB V_VTT okay
MB V_GBE_+2V5 okay
MB V_GBE_CORE okay
MB V_VCCTM okay
MB V_+2V5 okay
MB V_+1V5 okay
MB/BAT V_BAT okay
PS0 P_PWR okay
MB FF_POK okay
PS0 FF_UV okay
PS0 FF_OV okay
Led State:
Location Led State Color
MB ACT on green
MB SERVICE off amber
MB LOCATE off white
PS0 ACT on green
PS0 SERVICE off amber
PS0 OK2RM off blue
HDD0 SERVICE off amber
HDD0 OK2RM off blue
HDD1 SERVICE off amber
HDD1 OK2RM off blue
=========================== FRU Operational Status ===========================
Fru Operational Status:
Location Status
MB/SC okay
PS0 okay
HDD0 present
HDD1 present
================================ HW Revisions ================================
ASIC Revisions:
Path Device Status Revision
/pci@1f,700000 pci108e,a801 okay 4
/pci@1e,600000 pci108e,a801 okay 4
/pci@1c,600000 pci108e,a801 okay 4
/pci@1d,700000 pci108e,a801 okay 4
System PROM revisions:
OBP 4.18.10 2006/03/03 13:59 Sun Fire V210/V240,Netra 210/240
OBDIAG 4.18.10 2006/03/03 14:10 -
How to install free game without credit card information
how to install free game without credit card information
You can create an iTune and App Store account without credit card
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
SCSI Card in Ultra-5_10
Hello All,
I have an Ultra-5_10 box. I had to order for an external storage box. The storage capacity that I am looking for is 2 * 72GB. I want to know what is the type of SCSI card the system will be having ? What is the option to find it.
From dmesg output I could find the following message. "glm0: Rev. 5 Symbios 53c875 found." From this can anybody tell what is the type of SCSI card.
Thanks
Biju K Joseph.That's a single channel, Single-Ended SCSI adapter.
The card will have one and only one external SCSI connector on it.
(If DMESG had reported a 53C876 chipset, then there would be two connectors.)
It would be fine for use with a disk pak.
You should be able to confirm what you have by a visual inspection.
It is a simple SCSI-only card, # 375-0097 card. [X5010A]
If you inspect the card itself, you'll find the 375-0097 part number on a barcode label.
BY the way, the "Sunswift" combo SCSI/Ethernet card does't use that 53C875 chipset.
http://sunsolve.sun.com/handbook_pub/Systems/U10/components.html#SCSI -
How to install the driver for Airport card in a mini
In a post regarding trouble with wireless connections some suggested...
cd /System/Library/Extensions
mv IO80211Family.kext IO8021Family.1066
well I did it and now my system is telling me there is no Airport card installed. How can I reload just the Airport drivers? I have my 10.6.3 OS X disk. Can I do it with that?
I tried running Disk Permissions with no change. I have since renamed the file back to what it was. The I started getting pop ups telling me the kernel file was improperly installed.
I just don't want to reinstall my complete OS.I've already put it back to the original file name of IO80211Family.kext. I've run disk permissions too, in fact I've run it several times.
It keeps repairing a bunch of java stuff but that's all.
I've set the permission on the file to what I believe they were before I ran the mv command.
It was after I restored the file name, that I got the popup saying it was installed incorrectly, but, it's not saying it now.
And I have rebooted too, still no Airport.
Oh, I never replaced anything with earlier version, I just renamed and renamed back. -
How to install applet onto the real card?
Hello erperts,
I am rather new to java card programming. I have downloaded java card kit and tested sample applications successfully.
Now i have OMNIKEY CardMan 5121 card reader with some sample cards(i dont know the type for cards), i just want to install the sample programs given along with the kit into the real card, what should i do? can i do it with tools in the kit itself or have i to use any tool?
Waiting for your kind reply
Regards,
SRI.Hi,
I have the same doubts, except i have another kind of card.
So, i own a G&D SmartCafe Expert 64, having this specs:
Specifications:
� GlobalPlatform Card
Specification 2.0.1�
� SUN Java Card� 2.2 incl.
complete implementation of
optional features, e.g. object
deletion support, support of
logical channels
� ISO 7816 1�5
� SUN Java Card� 2.2 Bio API
What I want is to install the Java Card Wallet sample onto the card.
Can anyone guide me through the process? I would try to use script file generated with scriptgen, but I don't know if this is exactly how I am supposed to do it. Wouldn't want to spoil one good card.
Edited by: andrew2856 on Jun 25, 2008 8:11 AM -
How to install a full length PCIe card?
Having trouble installing Digidesign PCIe accel cards in my Macpro. I can't seem to get them past the chassis edge. What's the trick?
Hi Jim,
This is the link for OWC Install Videos:
http://eshop.macsales.com/installvideos/
Just scroll down to whichever Mac Pro model you have, and select the relevant video.
Regards,
Bill -
How to install firmware onto my SD card
Hi y'all!
Running a mac with 10.8, and trying to update my SX280 HS so that the video lasts longer than four seconds. I have my SD card in my computer showing up as "CANON_DC", and I downloaded the firmware, but it won't let me drag/drop the firmware into the SD card file. Does anyone know a workaround for this? What am I doing wrong?
Thank you!Is the protect switch on the SD card engaged?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472 -
G-4 tower, PPC,10.4.11 PCI SCSI card install
G-4 tower, PPC,10.4.11 and Classic 9.2. I have been trying to install a new Adptec SCSI card. From what I understand, this card should work??
I keep getting the "grey vail". The fix is to remove the PCI card.I have tried USB and network PCI cards. Both create NO problems. Is there a good reason I cannot install the SCSI PCI card??These look pretty old to me...
http://www.adaptec.com/en-us/downloads/macos/macos_x/productid=ava-2906&dn=adapt ec+scsi+card+2906.html -
Hi every one!
I have G4 running Mac OX 10.4, I'm able to scan from the ScanMaker 4 in Mac OS 9 into PhotoShop or using the scanning software, however if I try to scan in OS X there is not communication between the computer and the scanner.
I have installed a " PCI Adaptec SCSI" card ( which work fine in OS 9x), so far no luck in Microtek web site or Adaptec trying to down load a driver, a patch or something that allow me get my scanner to work in OS X.
Any help on this will greatly appreciated!
Regards!joem,
I have had the same problem with an Epson SCSI scanner. Either there is no driver or it does not work. The solution is shareware "VueScan" which worked presto. You can download a free trial version before buying.
Hans -
Hi all
I m trying to install new dual ultra320 scsi controller on Sun Fire c20z Server. But there is an error message
ERROR: EXPANSION ROM NOT INITALIZED
PCI MASS STORAGE CONTROLLER IN SLOT 02 BUS 03 DEVICE 01 FUNCTION 0.0
Pls help me to fix this ProblemSorry rakman2, but your suggestions will not work with that system.
A Sun V20z is Intel Xeon based.
No OBP, and therefore no OBP commands or utilities (such as <i>probe</i>).
Let's just wait for <i>hero</i> to provide more information.
Edit:
Corrected a typo and noticed that it has been three months.
The original poster has not returned.
... and an error about a ROM on a peripheral usually means unqualified 3rd party hardware. -
How to setup apple ID without credit card
How do install Facebook App without credit card inforrmation on apple ID account?
read http://support.apple.com/kb/HT2534
-
I've had a back-up tape drive working (just fine) on a G4 400 running OS X 10.3.9 for a couple of years. I want to move this tape drive to a newer (old) computer, a G4 1.25 now running 10.4.11. I dug around and found the Adaptec driver I apparently installed to enable the SCSI card 2906 on the G4 400. On the newer computer with the newer OS, though, I'm getting kernel attacks.
I searched the Adaptec site for a newer driver, and there are none. In fact, they indicate "the version 1.1 driver is embedded in Mac OS X 10.2 and later, there is no need to download and install this driver if you are running Mac OS X 10.2 or later."
I guess my question is, does anyone know if this driver is still embedded in Mac OS 10.4? If so, do you know what it's called - where it's located, so I can make sure it's there. (I actually installed the driver I had from several years ago, so if it wasn't there, it should have been then, but I still had kernel attacks.) Any other ideas on this problem?
Thanks.
GinnyThanks, all, for the suggestions. I'm totally flustered with this issue. Been working on it most of the day! According to what BDAqua found, I see that this card may not work with OS 10.4, but kind of hard to believe it wouldn't. (Hope that's just a post that was only current up through the 10.3 era.) The "Ask Adaptec" site Michael found does include 10.4.
I did find that 1.3 driver, and it is designed for Classic - not OS X (as is the SCSI probe). Fact is, this computer also runs an old (but still good) scanner booted in Classic mode, and everything is working great from that side. (Only use the scanner 4-5 times a year - hate to buy a new one when it still works.)
I do seem to have all the possible, appropriate extensions in OS X. In fact, I dumped all and reinstalled them through Pacifist. Still have the problem. This tape drive is accessed only through Retrospect, and I'm wondering if something in Retrospect is causing the problem instead of the SCSI connection, but I thought kernel panics were generally hardware related. When I access the drive in Retrospect (like to configure it), even if I don't "use" it, I get a kernel panic when I close Retrospect. If I try to restore a file, as it searches a tape, I get a kernel panic.
I examined the kernel panic log. Obviously, it doesn't mean much, but the text on every crash ends with:
com.apple.iokit.SCSITaskUserClienp
or
com.apple.iokit.SCSITaskUserClient(1.4.9) . . . and some numbers/letters.
I also see "SCSI" in a couple of other places in the report, so I do believe it's a SCSI problem, but I'm baffled.
I might reinstall Retrospect and see if it helps, but I'm not optimistic that it will. Guess I might also try installing 10.3 in a partition that already exists on the drive, boot in 10.3 and see if the SCSI connection starts working. (If it would, guess I'd have to reformat the drive, reinstall everything and stop with the 10.3 install.)
Any other ideas?
Thanks,
Ginny -
How can I re-install my old SCSI card (2906)?
I think I should have asked for guidance here first but...
I'm trying to re-install my old SCSI card in my G4 (Dual 1 GHz - 1.5 GB Ram, 10.5.8), it worked fine a few years ago (under previous OS) but I can't seem to get it running now. The Profiler sees the card (Adaptec 2906) but says there is no driver. So I downloaded a driver from the Adaptec site (2930 - they say its the same as the 2906 driver), installed it, connected an old ZIP drive as a test - and yes I set the auto termination. Restarted and got a Kernel panic! - retried and got another panic!
Un-installed the driver, cleaned the cashes and reset permissions with Onyx, so I appear to be back to a stable system.
Anyone have any experience with SCSI cards? I would greatly appreciate any/all suggestions. I do have some experience with computers [Apple II+, SE30, IIFX, 8500 PowerMac, but this old head just can't get this figured out.
Thanks in advance!I thought I'd post this as an update and general information for others who might have a similar problem.
I have my old original Scsi card installed (Adaptec 2906), and it does work under 10.4.11 (my alternate/back-up system). I installed just "Adaptec78XXSCSI.kext" in the system/library/extensions folder and as long as I start my scanner before I boot into 10.4 everything seems to work just fine.
It's a bit of a pain to have to switch systems whenever I need to scan something, but I can live with it.
I tried to install the drivers in 10.5.8 but that doesn't work at all. If I install the whole Adaptec2930 package, I get a Kernel panic almost immediately. If I install just the "Adaptec78XXSCSI.kext", the card is not recognized. From what I've read on various sites is that 10.4 is the last OS that supports SCSI cards (or at least this Adaptec card). If someone has better/more information, I would appreciate hearing from them.
I contacted Adaptec tech support, but I have not as yet received a reply
In the end, things have worked out reasonably well. I have the use of my old reliable Agfa Scanner (Vuescan is great!), and my old Powermac 8500 is still functional enough for me to recover all my ancient tape archives.
An interesting little twist: Part of my incentive to re-install the old SCSI card was to recover my tape archives via Retrospect. But I discovered while searching for the drivers that Retrospect no longer supports the Adaptec cards, and hasn't for some time, so I could not have used it on my G4 anyway!
Now I'm saving my pennies for a new 27" iMac -
How to install the new Airport + Bluetooth 2.0+EDR card on my dual G5?
I just received the card (Part# MA252G/A) in the mail but have no instructions on how to install it.
The Apple website makes it seem like you have to have a BA in computer science to do it, and provides no instrutions. I'd like to see what's involved before attemting the install myself. Mind you, I've built computers from scratch so I'm inclined to believe I can do this myself with a little help.
Thanks!I was told that they wouldn't sell it to a third party. But if you got it, Apple installs it without charge so I'd let them do it and insure that your warranty isn't voided. Get to know the folks at the apple store near you (if you have one). They're really helpful and do things "gratis" on occasion. This is one of the reasons I usually try to "buy locally" for everything. It may be cheaper online but the personal relationship often helps out in the long run and the cost winds up being less. fwiw, my 2¢.
Maybe you are looking for
-
Blob dictates duplicate items in details section-based on supression
I was orginally having issues with my supression on this. I think I have it figured out. But.. I have parts that I request that sometimes have drawing with them. I created a table in Access with 3 columns - number, .bitmap., nameof drawing I brough
-
Disable tablet pen pressure for eraser tool in PSE 10?
Hi, I recently bought PSE 10. I have an Intuos 3 Wacom tablet and whenever I switch to the Eraser tool, in the brush preview icon (top left corner) I see this ~ type of a shape with narrow-pointy edges, indicating that the size-pen-pressure feature i
-
My battery drains from 20% to 0% in seconds
Hello, I am having a strange issue with my battery. for some reason when my battery hits 20% charge remaining i get the warning message saying 20% charge then about 20 seconds later the phone dies. Any ideas? i have been closing all extraneous apps
-
Hi All, I would like to be able to perform a Column Datatype conversion on a database. I want to find all tables for a schema that has a CHAR type column and then convert it into VARCHAR2 of the same length and MODIFY existing data with a TRIM functi
-
Compaq Presario CQ57 recovery password
Hi guys, I have a compaq presario CQ57 ..when i turn it on, it asks for a administrator password or power on password. after 3 failed attempts it says "system disabled 91636716" ..does anyone have a password, plz & thank you. Also if given a password