How to install xmonad with gnome?

oh, god! don't told me to look the official xmonad page, I follow the page but can't get it done. so I'd love to see what your guys recipe

Xmonad has a very helpful mailing list & irc channel. The xmonad webpage is very informative too.

Similar Messages

[Solved] Pulse Audio won't work on newly installed system with Gnome

About a year ago I got a new computer and more or less retired my old one with my first arch install. Recently, I decided I would set it up as a Linux system for my sister. I first updated the computer, which broke it royally (since it was last updated before the /bin symlinking happened) but I eventually got it fixed. However, after doing that, Pulse Audio wouldn't work, then I broke X and decided to do a full reinstall.
Now, on this clean install, Pulse is again not working. I have set up Gnome and gdm to work, and everything works great except Pulse. The wiki says that Pulse with Gnome 3 requires no extra setup, so I have not edited conf files at all. I have, however, installed "pulseaudio-alsa", which created this conf file:
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
which seems fairly standard. Anyway, I tried removing it and had the same problems. When I have Pulse Audio running and try to play sound, I get the error:
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -16,Device or resource busy
which is obviously trying for ALSA, or from mplayer:
AO: [pulse] Init failed: Connection refused
Running "pacmd list" nets me:
Daemon not responding.
and pavucontrol gives me:
Fatal Error: Unable to connect to PulseAudio: OK
when I try to start it.
No pulseaudio commands seem to work (e.g. pulseaudio -k). They don't raise any errors, but also it doesn't have any effect on the server.
The only asound conf file is "/etc/asound.conf", clearing ~/.config/pulse does not fix the issue.
Journalctl does not seem to give anything interesting (Stale PID is the only message when starting Pulse), though admittedly I'm just vgrepping all of journalctl since I don't know how to narrow it down more, nor does the output from pulseaudio -vvvv. There are a lot of errors in pulseaudio -vvvv, but they all appear to be related to loading devices that don't exist, and so I assume not a problem, I can post it if necessary. Sometimes when I kill Pulse the process refuses to go away and I have to reboot in order to clear the process out, but I don't think that's related.
If I kill Pulse or keep it from starting on boot, I can play sound, but only through ALSA, and while I didn't have the problem I expected (I can still play multiple things simultaneously) there's still the issue that the volume buttons in Gnome will no longer work and that the volume levels ALSA reports are basically nonsense to a human being.
I basically just blurbed everything I thought of/found on the wiki or forums, and I'm not really sure where to go from here. It's a fairly old computer, so that could be related, and I'd be willing to dump Pulse if Gnome could integrate well with ALSA, but obviously fixing Pulse would be the preferred option.
Any suggestions on where to look next? I've run out of ideas.
Thanks.
Last edited by HuFlungDu (2014-01-07 19:52:11)

Wonder if you have a conflict between two audio cards ... for example, I have a friend with some PulseAudio problems caused by conflict between the HDMI audio from his graphics card and his onboard sound. Something would switch PulseAudio to the wrong card and it would just quit after getting itself into a twist. Unsolved, I'm afraid, but have a look at commands such as:
aplay -l
pactl list sinks
pactl stat
(Latter two will need PulseAudio coaxed into life first)
and of course, the Arch wiki.
If there is a conflict, blacklisting kernel modules might also be needed.

How to install PDF with XDB on APEX 4.2.2

Hi,
does anyone know a "how to install PDF Output" using XDB instead of Apache or APEX Listener on APEX 4.2.2 Please give me the link.
I tried to install APEX Listener but I always got errors so I came back to XDB. If there is an easy way to install the Listener please send me the link.
Thank you and best regards
Siegwin

i wrote an article about installing listener but then the latest version of listener at time was 1.x . check the following
Vishal's blog: Installing SSL enabled APEX 4.1 with development environment and APEX Listener on Weblogic and standalone
listener now is at 2.x and a few steps such as configuration of properties have changed. you no longer have to create users such as adminlistener and the listenerAdmin page isnt there anymore.
read the above and tell me the exact problem you have and i might help you better.
read Contents . this is oracle's documentation for listener configuration. this is good. let me know if you need some help in understanding some step in this
once listener is configured, configuring it for pdf download is very easy.
let me know if this answers your query in the current thread
Regards,
Vishal
Oracle APEX 4.2 Reporting | Packt Publishing
Vishal's blog
Message was edited by: VishalPathak(OBIEE-APEX)

How to install solaris with downloaded binary.

dear all members,
I had downloaded solaris 8 binary in winnt, i found that it is a zip file containing one file with file extension .ml (sol-8-1_01-install-fcs-bin-ia-ml). How to install? need to format hardisk? what partition tool to use? where to get startup disk? need to write a CD? Where to get best docs available for beginer????
thanks for all guys...
from
ngkengyap

dear,
I am sorry to come back again. I have some problem. I read the documentation, is it solaris companion CD contains free software binaries for solaris. is solaris binari included? i need the documentation that tell me how to get started (as novice) to install solaris. I have downloaded the solaris binary, and how to do next?????
i hope some one can give me a kindness helping hand....
thanks...
from
ngkengyap

AS10GR1(INF+BI) + AS10GR3 - how to install - probelm with deploying appl..

Hello :)
I've got following configuration:
MS W2003srv 2xXeon3.2GHz + 2GB RAM
iAS10GR1(9.0.4) - Infrstructure
and on the same machine
iAS10GR1(9.0.4) - BI (Reports and Discoverer)
Now I need to install iAS10GR3 (10.1.3) - because of Java 1.4.
How to do it in the fastest way and assume that I can't reinstall iAS10GR1.
When I install option with http server, opmn etc ...
I've tested single installation of iAS10GR3 and I can deploy and test my WebServices. When I install Release 3 on the same machine with Release1 everything is ok - I can deploy webservices but I can't test them.
I can prepare mesg to test via web page and in the invoking moment theres no action.
In apache log of R3 there's
10.10.1.18 - - [16/May/2006:17:18:51 +0200] "POST /WebServices/SRV_PLANY_ZAMOWIEN_STATUSSoapHttpPort HTTP/1.1" 500 5
What could suggests that there is a problem with apache configuration (in fact thera 3 instances of apaches)
However when I checked status of ports in every apache instance
opmn\bin\opmnctl status -l
I didn't notice that there's any ports conflicts - installer prepared ports quite pretty that they should coexists.
Any suggestions?
greets
Pepin

Hello :)
First, I noticed that I posted a mesg at Portal forum .. if a moderator would by nice - move this topic to proper forum, please.
And I configured succesfully ... however I made two things and I have to test it
one more time - I installed a patchset2 to iAS10GR1 to version 9.0.4.2
and I deinstall iAS10GR3 and choose an instaling option without http server.
Now I can deploy and test webservices and every previous functionality (reports and discoverer) works fine ...

How to install SEC with OCMS version 10.1.3.4

It is said that when install, select customer install and select SCE in install guide of OCMS, but actually when in install l progress, only allow to select component ,such as presence, proxy registrar. No entry for selecting SCE.
How to install SCE and test example projects in SCE?
Thanks

Hi,
Firstly the SUBJECT of your question reads SEC in place of SCE and it is a CUSTOM install not a CUSTOMER Install.
Coming to answer your question, if you find the latest install guide, you wont see the SCE pre and post install etc in it. SCE has been taken off OCMS. OCCAS (Oracle Communications Converged Application Server) will be the Execution platform of SIP from now on. OCMS Applications too would be merged into OCCAS.
Hope this answers your question.
Regards...

How to install icloud with windows 8.1pro

What is required to install iCloud with Windows 8.1 Pro Operating System. I keep getting install error even though I change compatibility to Windows 7.

What install error - verbatim? What source of Download - iCloud for Windows ?? - ÇÇÇ

How to install JSTL with Tomcat 6.0

Hi
I'm trying to install JSTL with tomcat 6.0.
I did not understand what is the link that I need to use in the following suns website.
http://java.sun.com/products/jsp/jstl/.
Could anyone help me with this.
Thanks in advance

Hi,
First you need to add the JSTL jars(jstl-api-x.x.jar and jstl-impl-x.x.jar) to the lib dir under your WEB-INF tomcat dir and then, to use it on a JSP page make sure the follwing line is added before the <HTML> tag.
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>There you go. Just enjoy it now.
Thanks
Thiago Santana

How to install KDE and Gnome

Normally I'm a big KDE user, but there are some things in GNOME I want to try out to see if I might make the switch. I already have KDE installed, if I wanted the option to run KDE or GNOME can I just 'sudo pacman -S gnome gnome-extras' and it'll show up in the session type for kdm?

i run gnome BUT like a bunch of kde programs
so both are installed
kde dose have a tendency to reset the "open with" defaults
then there is an option in kdm to run gnome,kde, or other
so it is not a problem at all , you might need to re set the "open with" defaults but that is about it.

How to install patches with .bin extension

I have downloaded Solaris_JDK_1.2.2_07_sparc.bin patches, but how can
i install this ?? It is not like .tar.gz.....Help

Hi,
Did you download the patches or the JDK kit?
Based on the file you said you downloaded it looks like you downloaded the whole JDK 1.2.2_07 kit. If you wish to install this all you have to do is download or move the file to where you want it to install and change the permissions on the file so you can execute it (chmod 755 Solaris_JDK_1.2.2_07_sparc.bin) then in a terminal just type:
#Solaris_JDK_1.2.2_07_sparc.bin.
This will install it for you. Make sure you update your path and any links that might be pointing to older versions of the JDK to the new JDK you just installed.
If you it was the patches you ment to download the file you download should look something like "1.2.2_07_patches_sparc_OSVERISON.tar"
to see what patches you have installed in a terminal type:
#showrev -p
To install the patches you need to extract the patch archives you wish to install. And then issue the following command:
#patchadd -M <your_patch_directory> <patch-id>
Please also consult the README files that come along with the patches as they might be of use to you also.
Hope This Helps
Regards,
Andrew
Sun Developer Technical Support

How to install JDeveloper with GeoRaptor

Hi,
Until now I'm using SqlDeveloper with Georaptor. A fine combination. Specially for Pl/Sql-development.
I want to explore JDeveloper and Spatial-data, for Web J2EE-development.
Questions:
Can Georaptor be combined with JDeveloper (and how)?
JDeveloper has an OC4J pre-installed, as Mapviewer (demos) has too. How to combine these two OC4J-isntallations to one OC4J-installation?
Any reaction will be appreciated.
Leo

Hi, GeoRaptor is extension of Oracle SQL Developer(http://www.oracle.com/technology/products/database/sql_developer/index.html).
And SQL Developer is not part of JDeveloper. I think it is not possible to install GeoRaptor to JDeveloper.

How to install 10gAS with RAM 1G ?

Hi,
The Oracle 10gAS (Infrastructure) installation stop me when my PC has only 512M of RAM. How can I overcome this? It's too expensive to have 1G of RAM just for a testing.
In the same machine if I switch to use Linux, I can install 10gAS without any problems.
Please advice.
Pham

A repository database and lots of other services will be created in the Infrastructure. Running this requires just about 1GB RAM. To that you've to add memory consumed by the OS and other programs which are running.
Even if it worked installing on a PC with 512MB it must be very slow. Occasionally some services will hit timeouts etc.
Testing under this enviroment doesn't really make sence.
Regards,
Martin MalmstrÃ¶m
PS. A 512MB DDR-RAM only costs $40-70. A days work is much more expensive (I presume)

How to install package with documentation

hi, i installed emacs but the manual is missing in this instalation.
How can I force to install a package with manual and other documentation?
Thanks

i solved it. I used the correponding option in PKGBUILD and compiled again. R.M.

[SOLVED]How to install packages with the -U option? PGP error.

I have to downgrade some packages (linux package due to ath5k problem), but pacman won't allow me because of the signatures.
I downloaded the packages i need from here http://schlunix.org/archlinux/.
These packages are safe to install? How can i bypass the signature check, if these packages are safe to install?
Thanks.
Last edited by Hyugga (2012-04-19 19:46:23)

If you have a pgp key, you can sign the packages with your own key. You can do this by editing /etc/makepkg.conf, adding your key to the GPGKEY="" section and enabling the sign option in the BUILDENV section. When building the package, it'll then be signed with your personal key. Afterwards import your key in pacman (pacman-key -r <yourkey>), assign the proper trust level and you're good to go.
A workaround is to temporarily set "SigLevel = Never" in your /etc/pacman.conf (and hence disabling keysigning).
EDIT: I just bothered to actually check your link and you'll be installing prebuilt binaries, so my first explanation doesn't apply there (you won't be building anything). So just setting SigLevel to Optional or Never (temporarily) should do.
Last edited by Gcool (2012-04-19 19:23:05)

How to install XDK with 9iAS 903

I am completely new to the XML and the XDK and have been trying to get the XDK installed with 9iAS 903 and the demos to work. When I try to install the demo I get the following error.
Error: javax.naming.NamingException: Lookup error: java.net.ConnectException: Connection refused: connect; nested exception is:
java.net.ConnectException: Connection refused: connect

Hi,
Refer the below link:
http://download.oracle.com/docs/html/B12034_01/xml.htm
Regards,
Xaheer

How to install xmonad with gnome?

Similar Messages

Maybe you are looking for