How to install xp on windows 7 system (dual boot)

Hi all!
I have Lenovo s10-2 with 3G module and Windows 7 start edition originaly installed on it.
Beacause the system is very slow I want to install xp home via usb. And I woud like to have both systems working.
Is the any tutorial how to do it? And what software I need for doing it?
Thanx in advance!

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Similar Messages

How to install PS CS4 64bit in a Dual Boot system

Hi,
I have just created a dual boot system.
Dell XPS 600 3 gig of ram (soon to be 6 gig
Windows XP Pro 32 bit
Windows Vista Home Premium 64 bit
The windows OS can not see above 2 gig (and that is a long story but believe me I have had it confirmed - even though a 32 bit system should be able to see up to 3.5 gig). That is why I created the dual boot (into Vista 64) OS.
The Vista 64 bit OS CAN see the current 3 gig (soon to be 6 gig).
Each has its own partition and I dual boot via a 3rd party BootIt NG
Question:
1. What is the proper way (if I even can do it) install PS CS4 on to the Vista 64 bit (in another partition) to take advantage of PS CS4 64?
2. Do I have to delete the XP 32 bit version and reactivate?
3. I do not use Bridge (or do I have to in order to get the 64 bit)? I have seen some threads here about using Bridge so I was wondering about that.
4. I also have IL CS4, ID CS4 and plan to do the same. Is that possible?
5. I know there is an issue with plugins so I will address that matter as it comes up. Hopefully, though the downloaded brushes will work ok in both the 32 and 64 bit envrionments.
Thanks in advance,
Bob

Thanks for the responses. Perhaps more of an explanation as to what I have done is in order.
I purchased this Dell XPS 600 XP Pro system some time ago. It was a "boomer" (powerful) system in its' day.
I subsequently increased the Ram to 2gb. I also have a internal 160gb 10K (rpm) Raptor and and another internal WD 250bg (7500 rpm) HD. I drive 3 monitors with a Nvidia 6800 and a Nvidia Dual port 7800 Gt.
So, all in all, the system is still (by today's standards) fairly robust.
BUT, with PS CS4, I tried to up the Ram from my installed Windows XP Pro 2gb system to 3 gb (given that every spec in the world says a 32bit system can see a max of 3 to 3.5 gb).
On my system. Wrong. It (the Windows XP My Computer Properties system would not see over 2 gb (even though BIOS said there was 3gb!) Additionally, BIOS said my board was capable of 64 bit processing.
After hours with DELL tech support (what a waste), I just concluded I should make a Dual boot with Vista Home Premium 64 bit.
I did, and Vista 64 does see the current 3gb in the system. I should add, I am going to make it an 8gb system and my memory will arrive from crucial.com tomorrow.
So Bob, to address your comment. I started (2 years ago?) with Windows XP Pro 32 bit. I have a ton of applications (32 bitters) on the C drive now. But I want the extra addressing (AKA speed potential) capability of a 64bit system. In short, that is the reason for the Dual Boot.
I just cannot burn the 32 bit bridge due to the number of 32 bit apps on it, but I can now utilize a 64 bit architecture for PS CS4, (and as I now am reading ID, and IL CS4 flavors)
Hope I cleared things up.
And as always, thanks
Bob

How to install itune under Windows XP 64-bit professional with SP2?

I have iPhone 3GS for over a year and I have set it up at my work computer (Windows XP professional) with latest iTune and it work great. Recently our IT has upgraded our system and all of our new machines has Windows XP 64-bit OS.
I can't figure out how to install iTune under Windows XP 64-bit, to synch with my e-mail, contact and calendars any more?
Can any one help?

New machines? With XP 64-bit? Your IT department is being rather foolish, in my opinion, deploying new installations of XP 64 since Microsoft discontinued mainstream support for it (more than two years ago) and it's never really been satisfactory.
Anyway, there is no version of iTunes that supports the 64-bit version of Windows XP and almost certainly never will be. If you search the iTunes for Windows forums for "XP 64" you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete. Connecting to iPhones is one of the most problematic issues.
Regards.

How to install RAC on windows

Can anyone tell me step by step how to install RAC on windows advanced server. I want to know whether RAC must need Microsoft Clust Service. When I create a cluster with clustersetup.exe, I'm told that it's need oracle partition, but I don't know how to make it.
thanks advance!

Hi, I am Nirmal ([email protected]) Please try this out
Requirements:
H/W: External shared hdd
RAM: 256 MB
OS:win Advance server ,win 2000
PATCH:
The Windows CFS and Clusterware Patch for 9.2.0.6 -- available in Metalink under Patch number 3973928
The 2.2.0.18.0 Oracle Universal Installer -- available in Metalink under Patch number 2878462
The 9.2.0.6 RDBMS patchset -- available in Metalink under Patch number 3948480
1.Install shared disk array.
2.Install cluster interconnect and public Network hardware
a)Create two entries of NIC-Ensure Public IP listed at the top and private IP should be listed below the public IP.
b)Inter connection between two nodes are connected by switch.
3.Ensure the IP/Hostname of all node is entered in hosts file.
4.Ensure the temp /tmp directories are same accross all node.
5.Ensure that all nodes have same local admin name which has full access on the oracle home drive and win home drive.
6.Run the final clustercheck which is available in patch 3973928 which will check the above process if any incorrect it will indicate.(Location is 3973928\Disk1\preinstall_rac\clustercheck subdirectory).
7.Prepare the Logical Drives in Windows dont format or give any drive letter.
8.Install and Configure Cluster software with RAW Datafile.
a)Install oracle home on NTFS partitions and Datafile on Shared Logical Partition.
9.Run Oracle cluster setup wizard.
a)Click clustersetup command line.
b)A welcome page launches click next.
c)Create a cluster. click next.
d)Choose "user private network for interconnect" and click Next.
e)Network config page appears, enter the cluster name. then enter the public hostname for all nodes. Accept the default or change as appropriate for your cluster configuration. click next.
f)Cluster file system option page appears. Choose No Cfs. click next.
g)Disk config page appears. Click "Create Oracle Symbolic links button" label as srvcfg to the partition we have created.
h)Oracle Object link Manage window appears:
     1)From symbolic Link column, select an empty row.
     2)Type in the desired datafile link name and hit enter to save
     3)click apply button to commit.
     4)When the progress bar at the bottom of the screen stops      moving choose close.
i)VIA Detection screen appears. Choose yes or no depending on your config.(VIA-Virtual Interface Architecture).
j)Install location screen appears. its default win_home\system32\osd9i accept .click finish.
k)Cluster setup window appears if no error it will complete and close automatically.
l)Check the serices,
     1.oracleobjectservice
     2.oracleCMService9i
(if any error check the error log)
10.Install the 22018 OUI
a)home oracle_home.
b)Click all nodes and install.
11.If necessary install RDBMS Software into oracle home.
RAC Database using DBCA::
a)Create listeners using Net configuration assistant on each node
b)Run DBCA from command prompt.
c)Welcome page displays with the selection to create a cluster or
single instance database. choose oracle cluster database. next
d)Operation page is displayed. choose create database. Next.
e)Node selection page. Select all nodes. Next.check OracleGSDService
is running on all nodes.
f)Database Templates page is displayed. Choose new database. next.
g)Database Identification page. Enter the Global Database name and
SID (oracle will register SID prefix with a number, this will
become the SID of each node.)
h)Option page for java and inter media database. Choose according to
your need.
i)Connection option select dedicated or shared server .
j)Initialization parameter page. Add required values.
k)Database storage window.(ensure the storage information points to
the symbolic links specified in cluster.)
l)Creation page displayed, click finish.
m)DBCA summary page click create database and ok.
Note:
1)During Java creation it may slow down or hang. Check the CPU
usage and at 95-99% it will slow down please wait check the log.
2)ORA-29807 error may come. Ignore it its a (bug 2925665).
3)alter installation run the script prvtxml.plb, utlrp.sql
4)Any other error please check the alert log.
Message was edited by:
user474717

I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

I am trying to install CS3 on Windows 8 and keep getting a message saying "the serial number I entered is not valid please enter it again" Does anyone know how to install successfully on Windows 8?

CS3 is unsupported under Windows 8. That said, you'll need to contact Adobe
directly for serial number issues.

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

How to install acrobat in windows 7 ?

please help how to install acrobat in windows 7 ? when i install mobile spy software web account in my pc there is update massage about acrobat.
thanks

Hi,
Is Acrobat already installed on the machine?
Please share the screen shot of the error/warning message.
Regards,
Anand

How to install ABAP as a backend system in my EHP1

I have successfully installed EHP1 composition enviornment from SDN , now i m able to work on
NWDS for JAVA and Enterprise portal . it contains java application server .
but in order to get data from ABAP Backend system from NWDS(JAVA) , I don't have ABAP Backend sysytem , how to install abap backend system with abap application server in my system ????
there is one link to install Netwaever ABAP 7.1 trial version( webdynpro abap and abap application server ) in sdn but in system requirement it clearly mentioned that " make sure that there is no SAP sysytem installed in ur system " .
I need webdynpro java ,webdynpro abap and enterprise portal together but i have only webdynpro java and EP , so how to install abap as a backend system in my EHP1 ?
or any other download link which contain all three ??
please help me ?

Hi,
CE is indeed not double stack. However, it is possible to install both an ABAP and a CE on the same host provided they have different system ids and instance numbers. This works for the current SDN download versions: CE 7.1 and CE 7.1.1 (system id CE1, system number 00) and AS ABAP 7.01 (system id NSP, system number 02).
Needless to say, it is perfectly possible to configure and establish all kinds of connections between the two:
JCo/RFC calls in both directions
Web Service calls in both directions
AS ABAP as a portal backend
publishing system information in SLD
accessing an ESR
accessing a Service Registry (publish + query)
using AS ABAP as user database for the CE
Single Sign-On
Best regards,
Thorsten

How to install ABAP as a backend system in my EHP1 composition enviornment

I have successfully installed EHP1 composition enviornment from SDN , now i m able to work on
NWDS for JAVA and Enterprise portal . it contains java application server .
but in order to get data from ABAP Backend system from NWDS(JAVA) , I don't have ABAP Backend sysytem , how to install abap backend system with abap application server in my system ????
there is one link to install Netwaever ABAP 7.1 trial version( webdynpro abap and abap application server ) in sdn but in system requirement it clearly mentioned that " make sure that there is no SAP sysytem installed in ur system " .
I need webdynpro java ,webdynpro abap and enterprise portal together but i have only webdynpro java and EP , so how to install abap as a backend system in my EHP1 ?
or any other download link which contain all three ??
please help me ?

Hello Shilpa,
in other [thread|Re: ABAP and JAVA version of NW2004s sneak on the same system;, where you have the contribution to the same topic, Raja has written:
earlier i had abap and ep sp16 (first ep was installed and then abap was installed)
I would try on your side to instal ABAP instance now. At worst scenario, you have to make both installation
again on clean up HD.
Bye,
Peter

How to install icloud on windows vista?

how to install icloud on windows vista?

Use iCloud control panel version 2.1.2 from here: http://support.apple.com/kb/DL1687.

How to install 10g on windows 2000

Hello
Please guide me step by step as how to install 10g on windows 2000 .
I am a beginner and I want to install this setup in my office.At present we are using oracle8i on windows 2000.We want to do a fresh installation in a new setup and hence for the time being we are not going for upgrade or migration from 8i
Please guide me .
Thanks in advance.

Just follow the installation guide, that's all you need,
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
Make sure install Oracle 10g into different ORACLE_HOME than 8i

How to install Motion on Windows/PC ?

How to install Motion on Windows/PC ?

Motion is a OS X-only app, so it's not supported in Windows

Can anyone help me with how to install itunes on windows 8. The apple techs suggestions did not work

Can anyone help me with how to install itunes on windows 8. The apple techs suggestions didn't work. Spent most of today installing and uninstalling itunes according to their instructions. They will charge me again if I call again.

When I run the iTunes64setup.exe it says: "The thingy is not a valid win32 application."
That generally indicates that the installer has been getting damaged on the download.
What web browser have you been using for downloading the iTunes64Setup.exe? Does it make any difference if you use Firefox instead of IE for the download (or vice versa)?

How to install office 2013 window on imac

how to install office 2013 window on I Mac do I have to use the bootcamp to install it ?

It does not run on Macs, only on Windows. So, yes, you would need to install Windows on your computer or:
Get Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion/Mountain Lion.
These two suites are similar to Libre Office:
NeoOffice - $30.00
Open Office

[Forum FAQ]How to customize Windows 7 & Windows 8.1 dual boot menu

Scenario 1:
When you install Windows 8.1 on Windows 7 based computer, the default boot option is Windows 8.1 boot options menu which is shown as Figure 1:
If you want to use the old Windows 7 boot menu, follow these steps:
Start the computer and then go into
Windows 8.1 boot options menu which is shown as Figure 1.
Click
Change defaults or choose other options, and Options menu appears which is shown as Figure 2.
Click
Choose a default operation system option.
Click
Windows 7 Enterprise option to set Windows 7 as the default operating system in the Choose a default operating system menu which is shown as Figure 3.
Restart, and it will be changed to
Windows 7 boot options menu which is as shown as Figure
Scenario 2:
If you have Windows 7 and Windows 8.1 dual-boot configuration, and the default boot menu is Windows 7 boot options menu which is shown as Figure 4.
If you want to get the GUI as Windows 8.1 style, follow these steps:
Boot into Windows 8.1 computer, open the
command Prompt (Admin).
Type the following command
bcdboot c:\Windows and press Enter.
Restart, and you'll see the Windows 8.1 boot options menu which is as shown Figure 1.
Scenario 3:
When you have dual-boot system, one of the system disappear from the boot menu. We could follow these steps to get it back:
Boot the computer from the installation media (Here my example is Windows 7) that works fine system.
Go into
System Recovery Options menu, which is as shown as Figure 6.
Click
Command Prompt link to open the command prompt window
Use the
diskpart and list volume commands to confirm the OS boot drive, the commands are shown as Figure 7.
Backup the bcd file, rename it.
Rebuild a new bcd file. It will scan all disk to confirm all Windows installation on your computer and ask if you want to add them to boot list.
Type
Y to agree with adding to boot list. In next boot, you will get all boot options back in the boot menu.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Since you've selected as default OS as Windows 8.1 you can go to disk management console and format the drive as required.
You can remove the Win 7 entry from boot loader:
To launch msconfig:
Click Start
In the Search text box, type msconfig
Launch msconfig by selecting it from the search results above the search text box.
After msconfig is launched:
Go to the Boot tab
Slect the boot entry you want to delete.
Click the Delete button and then click OK.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How to install xp on windows 7 system (dual boot)

Similar Messages

Maybe you are looking for