How to integrate ADF with ADE Source control system?

We are going to set up a team with ADF developers and we're totally new to ADF environment. The developers will be working on individual and common Applications/ projects. We're planning to use ADE as our source control system. How do we set up Jdev/ADF environment so that we can use Oracle ADE source control system to sync up all the changes by the developers. any ideas and pointers to the documents are appreciated.
Regards,
Surya

Shay, I heard from many oracle employees saying that ADE works great with JDev. Why not outside of oracle like svn? As you know there are tons of complaints about svn & cvs. Thanks.

Similar Messages

How to integrate iReceivables with third party payment system?

Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
Sunita

Hello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

How to integrate KM with other Content Management Systems

Hi all,
The requirement is to integrate KM with third-party Content Management Systems like Documentum, Interwoven, fileNet etc. Related documents/tutorials can also be shared.
Helpful answers will be rewarded for sure.
Thanks in advance.
Regards,
Shankar

Hi
These links may be useful
Need to get a SAP NetWeaver component implemented quickly? Try SAP Best Practices
http://www50.sap.com/company/press/factsheets/solution/ep.asp
http://sap.ittoolbox.com/topics/t.asp?t=421&p=421&h1=421
http://blogs.ittoolbox.com/km/portals/archives/001903.asp
http://www.documentum.com/literature/literature.htm?uq=False&printReady=True
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/knowledge management in enterprise portal.pdf

RoboHelp Server 8 - compatible with "source control system" ?

Greetings,
Using RoboHelp Server 8, is it possible to add in a "source control system," such as Subversion or Bazaar, to track updates and versions? Is there another "source control system" alternative?
Also, is there a hosted RoboHelp Server 8 option, where Adobe provides, sets up and maintains the server hosting the RH?

Hi again
Well, sort of. Note that basic WebHelp and FlashHelp are capable of being merged. This allows a search to occur across the merged set. As I said earlier, merging can be automatically enabled or disabled in the RoboHelp Server. So theoretically, you could turn off merging at the server. Then you could publish ten projects. Perhaps you want two of those projects to be isolated islands where search only occurs in them individually. But for the other eight, you want a search to be performed across the eight projects. You could create a standard merge in this case and publish to the RoboHelp Server and have a search work across the eight merged files. You could also open each of the eight individually and search only that file set.
At least that's my understanding of how it works. Perhaps fellow Adobe Community Professional and fellow Adobe Certified Instructor John Daigle will pop in and offer some clarification if I've muddied the waters.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to concatenate string with a numeric control ?

Hi,
How to concatenate string with a numeric control ?
Thankyou.
Solved!
Go to Solution.

Its simpler to just use the Format Into String.
Attachments:
Format Into String.png ‏11 KB

How to Integrate Portal with SAP OFFICE(Please help me)

Hello Experts,
I have doubts on Portal and SAP office..
Please find the
1) How to show the document info record(DIS,like cv03n or cv04n) in Portal
Please let me know the step by step procedure...
2) After showing the documnet info record(DIS) in the portal,If user clicks on
original attachmnet of documnet info record(DIS) it shoud show the drawing
or diagam in the word or any uformat using SAP OFFCIE:
How to Integrate Portal with SAP OFFICE
Please let me know the details.
Please mail me any documents related to this to my mail id
[email protected]
Thnaks in Advance
Preethi DSouza

Hi Dharani,
Please check this thread.
How will do the connectivity with SAP and Non Sap System
Also ensure you avoid cross-posting. This has been mentioned to you multiple times earlier.
Cheers,
Sandeep Tudumu

How to integrate EBS with OBIEE 11.1.1.7.1

Hi ,
I would like to know , how we integrate EBS with OBIEE11g(not OBIApps) for finance module(GL,AP,AR).
What steps we have to do for integration.
Req - When a EBS user logs in he has to see details in obiee based on his ledger assigned to him.
Iam able to integrate EBS with OBIEE, able to move from ebs login to bi, but what required is security .
Any help please...

Check these
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e16364/ebs_actions.htm#CJAFDEIB
http://www.astcorporation.com/images/PDFs/White_Papers/2012/AST_White_Paper-EBS-OBIEE_11g_Integration.pdf

What type of license is required to integrate BIP with OEM12c Cloud Control?

What type of license is required to integrate BIP with OEM12c Cloud Control? OEM12c CC v 12.1.3 is already installed and in use however, will an additional license be required for this implementation?

interesting point
if you have bip license and oem license and you can integrate it, may be no additional cost required ( what is a cost center in this case ? ) - me-to-me discussion
imho it's about SR
please keep us informed of this question

Jdev support with PVCS Version control system

Hi,
Is there any JDev plugin available for PVCS source control system.
We have to use PVCS version control system for our SOA composites. If there is no plugin available, what is the approach commonly used for these scenarios.
Thanks for your response.

Which JDev version do you use?
AFAIK there is no extension for PVCS available for 11g (check http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/131167.xml).
Anyway if you have an external tool which lets you work with PVCS you can use it outside of jdev without a problem. Depending on the interface you might be able to do some kind of integration into jdev using the 'External Tools...' interface.
Timo

SRM 7.0 for Public Sector integrated with FM (Budget Control System)

Hello!
I'm starting an implementation project of ERP 6.0 and SRM 7.0 for Public Sector.
It would be necesary the integration not only SRM with ERP but with FM (Fund Management), with BCS (Budget Control System) specifically.
Is it possible? has anyone experience on it?
Thks so much in advance and best regards!
Marcela.-

Hi,
Certainly... If you have FM implemented in your project, you will have to make integration with SRM.
I did it some 3 years ago and it was quite problematic (a lot of notes were created by SAP on this matter, also as initiative from our project), but since then, I assume, it should not pose specific problems.
Regards,
Eli

Right Source Control System for Java

Could anyone tell me which Source Control System (like Visual SourceSafe for .NET) is perfect for Java Project?

common misconception #1: sourcesafe is for microsoft languages only. it's not, anything can go in it
common misconception #2: sourcesafe is worth using. it isn't. it's rubbish, and they have the cheek to charge real money for it
my money is on [ur=http://subversion.tigris.org]subversion, it's open source and pretty useful. others are available, this is just my opinion

How to Integrate Seibel with ADF ?

Hi All,
JDev Ver : 11.1.1.5
We need some Information about Seibel integration with ADF
So for we use to Integrate Seibel with the help of Web Services. We need the Is there any other approach for the Integration ?
I have gone through below link and got some information about JCA adapter, and URI based approach. If we use this, how to implement in the development part,
http://siebel-essentials.blogspot.com/2011/02/first-encounter-with-sai-ofm.html
We don’t know exactly how to do the implementation like if you want to retrieve/update some values to Seibel from Jdeveloper ADF using the above approach.
Is there any other approach for the Seibel integration with ADF ?
Thanks,
Gopinath

The blog you point to seem to show an example of using a REST service exposed by Siebel.
ADF allows you to create data controls based on REST services and then build the UI on top of them through the URL data control.
See step 4 of this tutorial:
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_53/jdtut_11r2_53.html

How to use a 3rd party source control tool with RoboHelp?

Hello,
I would like to set our RoboHelp users up with source control. They are using RoboHelp HTML 8.0.
Our software developers are using the AccuRev scm system; I'd like the doc team to use AccuRev, too.
Can someone direct me to RoboHelp documentation that explains how to set up and use a 3rd party scm system with RoboHelp?
Thank you,
Marilyn

It appears that RoboHelp 7 only sees the first SCC provider listed in the Windows Registry and ignores the rest. I was able to get RoboHelp to display the File | Version Control menu for SourceGear Vault by setting the following two Registry keys and removing keys for other SCC providers (SourceSafe, Surround SCM, and others I am evaluating).
HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider
     ProviderRegKey = \Software\SourceGear\Vault Client
HKEY_LOCAL_MACHINE\SOFTWARE\SourceCodeControlProvider\InstalledSCCProviders
     SourceGear Vault VS2003 Compatible Client = SOFTWARE\SourceGear\Vault Client
If I create a new RoboHelp project, save it, then select File | Version Control | Add to Version Control, RoboHelp does the following:
     - pops up the Select Version Control Provider dialog and displays SourceGear Vault Classic Client.
     - I select that, check "Make this my default selection" checkbox, and click OK.
     - RoboHelp crashes.
I'm using SourceGear Vault 5.02 under Windows 7 Ultimate 32-bit. A search of the SourceGear Vault knowledge base reveals that they do not support RoboHelp because of its incorrect behavior and instability. It's so sad that RoboHelp can't work properly with industry standard SCC providers. Vault is by far the best SourceSafe replacement out there, and very affordable.

How to integrate EBS with ADF Jdev

Hi all i have no idea of integrating EBs with JDEV . so can any one please tell me how can i integrate EBS with JDev using Oracle Applications Adapter ?

There are no guidelines and standards available at present for the custom ADF development with respect to EBS. So if you really want to do it, there will be lot of custom coding required just for the integration purpose like managing sessions, apps specific data etc.
--Shiv

How To Integrate ADF Application with Oracle Fusion Middleware Audit Fmwk ?

Hi All,
I'm having ADF/ADF Face Application (using Jdev 11.1.1.5) and want to integrate it with Oracle Fusion Middleware Audit Framework.
I want to generate audit records by using oracle.security.jps.service.audit API and also want that Audit Policy
for my Application will be visible and manageable through FusionMiddlewareControl (as well as othe admin tools)
on the same way how it is for the OPSS services for example.
Unfortunately i didn't find any detailed docs for the topics above. In the Oracle Fusion Middleware Security Guide,
it is steated only that:
"Stand-alone applications can be integrate d with the Oracle Fusion Middleware Audit Framework through configuration with the jps-config.xml file."
, but nothing in details.
Can somebody help with this, giving some more detailed info or links to the appropriate detailed documentation(if any) ?
Thanks in advance,
Krasimir

deepak - why not link to the real documentation instead of that site that illegally publishes stuff?
Krasimir - I had a look at this a long way back, and didn't explore it much further because I reached a dead end in trying to figure out how it worked. It seems to me that the function is there and may be used internally within Oracle, but that it's not documented well enough for we mere mortals of the public to use it.
Have you tried opening an SR with Support? They won't know, but they will be able to raise it up and perhaps find someone who does know - be sure to reference this thread in your SR if you go that route.
John

How to integrate ADF with ADE Source control system?

Similar Messages

Maybe you are looking for