How to integrate AT&T U-Verse with existing Time Capsule wireless network

I would like to switch from Comcast HDTV+Earthlink internet service to AT&T U-Verse, but it’s not clear to me how to integrate the AT&T system with our existing Time Capsule/wireless set-up. The TV (with cabled DVR) is in our family room; the Time Capsule, printer & iMac are in the study. Do I need to move the Time Capsule - so it is directly connected to the AT&T ‘gateway’ box via ethernet cable - or - can I just attach an Airport Express module to the modem/router box and leave the Time Capsule where it is? (I plan to turn off the wireless function on the AT&T device.)

No, we have a mix of 802.11g & 802.11n devises, so it looks like I will need to use the WDS option
Yes, this is your only option here.
can I 'create' a (Apple) WDS network rather than 'participate' in a (2Wire) network?
Maybe I am mistaken, but I sense that you may be thinking that you can somehow combine the 2 Wire and Apple networks together in a WDS setup. This is not possible since they are not compatible for this purpose.
You will configure the main Apple router to "participate in a WDS network". There is no other way to set it up if you want to use WDS. It will be configured as the "main base station" in the setup.
You could leave the 2Wire network "as is" and use it for guests or some other purpose. There is some concern though about having different networks in close proximity due to likely interference effects between the devices.
(2) Can I use an Airport Express device in 'relay' mode and also use it to stream AirTunes to the stereo?
Yes
I'm also wondering if the 2Wire device & the TC should have the same password and security (WPA2), so the NetQuakes seismograph in the garage can 'see' the internet through both devices. But perhaps a question for another day...
OK to use the same WPA2 Security, but having the same password for two distinct networks may cause some confusion.

Similar Messages

How can I Connecticut two Airport Express with One Time Capsula?

Only by Wifi or by LAN in a row?

What are you trying to accomplish with the AirPort Express devices?
Where will the Express devices be located in relation to the Time Capsule?
If you are planning to use the Express devices to "extend" the wireless range of your network, Ethernet LAN will always provide far better performance than trying to connect the Express devices using wireless only.
You have the option of connecting both AirPort Express devices directly back to two LAN <-> ports on the Time Capsule....or....connecting one Express back to the Time Capsule and then connecting the second Express to the first Express using Ethernet. This assumes that you have a "new" Express with both WAN and LAN ports.
If you choose wireless only, both Express devices will connect back directly to the Time Capsule, so both of them should be located where they can receive a strong signal from the Time Capsule wireless.
A "hybrid" approach can also work. Connect one Express to the Time Capsule using an Ethernet cable and then setup the second Express to connect to the first Express using wireless only.

Problem with Time Capsule Wireless Network...

I have Time Capsule over a year and it worked fine with Xfinity Modem. Recently, Xfinity had upgraded modems to Wireless router and I have ARRIS TG862 from them. I was able to set up wireless network using bridge mode on my Time Capsule and it all worked fine for a while.
My set up is: Arris Router is conected to Time Capsule thru ethernet connection. I have two more Airport Express in different areas of the house (one in Theater room and one in upstair office). I have conncted one port of Time Capsule to linksys switch which is supplying connection for all wired devices on network.
Last week, our wirless network stopped working and I rebooted router and TC. Still no resolution. I went ahead and set up the TC to factory settings but forgot to plug out all the network connections from it. I reconfiugred Apple TC with same wireless network name and same network settings. Most of the wired devices are connecting fine and two of the iphones and Macbook Pro won't connect. iphones, seems to be getting IP address but won't connect to interent. My windows laptop says connected to "EAGLE" my wireless network but "EAGLE 2" provides internet connection. I have reset my TC to factory defaults and reset same way so many times but still same results. I called Comcast and asked them to turn off wireless in their router thinking that router is creating a second wireless network but I still have the same issue.
Any suggestions on how should I set up my TC? I think, it went insane..............:(
Should I set up TC with a brand New wireless network Name to resolve this issue?
I have 7.6.4 version on TC.
I thought I knew, but what's the right procedure to set up TC? Plugged in the router and unplug from everything else and connected thru an ethernet connection to my laptop?
I have wasted so much time on this with the same results every time.
I did unplug all the network connections from TC and reset to factory defualts and set up my wireless again but same results.
Can someone please help me with this? Thanks in advance.

What is the model of the TC? The actual number.. A1xxx from the base of the TC is important.
When you have a modem router.. then the TC must be in bridge mode.. and create a wireless network.
Your names are not yet windows compatible.. please use all names that are short, no spaces and pure alphanumeric.
Fixing names is important part of this.
But the latest firmware 7.6.4 is also troublesome. I would downgrade it to 7.6.1 and factory reset before you start that process.
Any TC older than 3years may have hardware issues.. a Gen3, A1355 may need a replacement and certainly anything older does.
Drivers in windows for wireless are problematic as well..
Certainly start there and see how it goes.

How do I add an airport extreme to existing time capsule network and be able to use the router ethernet ports?

Good day everyone. I recently upgraded my airport extreme network by replacing the base station with a time capsule router. Since I now have an "extra" airport extreme router, I've set it up on the other side of the house to both extend the wireless range as well as use it's LAN ports for a home theater system in that location. Connecting the two routers was done via ethernet. It now appears that I need to do something "else" as the LAN ports on the now relocated airport extreme are nonfunctional. All devices are operating well for wireless and as a review, the modem is connected to the time capsule WAN which is connected to the airport extreme via ethernet cable via LAN to it's WAN port. What do I need to change on configurations to get the LAN ports functioning on the airport extreme? Thank you for any help.

Connecting the two routers was done via ethernet. It now appears that I need to do something "else" as the LAN ports on the now relocated airport extreme are nonfunctional.
With both base stations interconnected by Ethernet you have the basis for a "roaming" type network. If properly configured, both base stations' Ethernet ports would be enabled for wired clients.
The key configuration items for a roaming network are as follows:
All base stations used must be interconnected by Ethernet.
The "main" base station; the one connected to the Internet modem, must be configured to provide both NAT & DHCP services; all other base stations used must be configured as bridges (NAT & DHCP disabled.)
Each base station must have a unique base station name.
Each base station must use the same wireless security type and password.

Extending Gen 1 Time Capsule Wireless network with Airport Express N

I am having difficulty setting up my new Airport Express w/ 802.11N (SKU# MB321LL/A) to extend the wireless network from my Time Capsule (SKU# MB276LL/A).
My setup is as follows:
Time Capsule is connected to Cable modem with the following wireless settings:
Wireless mode -> Create a Wireless Network
Allow this network to be extended -> Checked
Radio Mode ->802.11n (5Ghz N only)
Wireless Security -> WPA2 Personal
The issue is the when I attempt to setup the AE to extend the network. I match the settings to the Time Capsule:
Wireless Mode -> Extend a Network
Select the Time Capsule Network
Allow wireless clients -> Checked
Wireless Security -> WPA2 Personal
However after I reset the AE the LED glows Amber and the following problem is reported:
+Wireless Network+
+This AirPort wireless device is set up to join a specific wireless network that can't be found. If you don't see the network that you want to join in the Network Name Pop-up menu, enter the network name and network password if necessary to try again.+
When I check the Airport->Wireless tab the settings were as before.
Any thoughts on this? Thanks.

Welcome to the discussions!
Have you tried to position the AirPort Express close, say 10-15 feet, as a test to see if it will connect that way?
If so, then move it back another 10-15 feet, etc.
5 GHz signals do not travel well or penetrate surfaces very well, so my first thought was that the signal was not strong enough for the Express to pick it up where you had it located.
Message was edited by: Bob Timmons

How IPAD use the Printer which connected with the Time Capsule

I connnected a printer to time capsule. And I can use the printer in Windows. But I can't use it on IPAD and IPHONE.
So are there any solutions?

iOS devices can only print directly to AirPrint printers. Wireless printers or printers connected to a Time Capsule are not necessarily AirPrint capable.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
The xPrintServer Home Edition will support a directly connected USB printer. The Network Edition will support any network printer.
These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
Otherwise you will need to buy an AirPrint printer or multifunction device.

Help with Time Capsule/wireless network setup

Just purchased Time Capsule, hooked it up, and followed the instructions to create a new wireless network. The problem is that my MacBook Pro can't find the internet via the new Time Capsule network. It can "see" the Time Capsule, and I can log on with the new password, but there is no internet connectivity. If I unhook the ethernet cable from the Time Capsule and hook it directly into the computer, the computer is able to rapidly access the internet. Plug the ethernet back into the Time Capsule, and even though the Time Capsule light is green, there is no internet connectivity for that computer or other computers. Also, the Time Capsule signal strength is exceedingly low. Help!

Please try the steps again. However, this time, I would like for you to perform a modem reset between powering all the equipment down and starting to power them back up again.
You should find a reset button on the back of your Motorola modem.
So, the steps should now be:
o Power-down all of the equipment, except the modem.
o Perform the modem reset. Note, the reset may take anywhere from 5 to 30 minutes to complete. Check your User's Guide that came with the modem. If you don't have a copy of the guide, you can get it here: SB5101 User Guide
o Once the reset is complete, power-up the TC by following the sequence I provided earlier.

Extend Time Capsule Wireless Network with Airport Extreme

I tried to install two base stations in my house. The first one is the Time Capsule which I use as my main router connected to the DSL modem by Ethernet and which has the main wireless network. The second is an Airport Extreme Base Station which tries to connect wirelessly to Time Capsule to extend the wireless network. I use WPA2 Personal as a security mode and it says there is an error at the end when it reconfigures the Airport Base Station --- questions: does it normally work with these two devices in that order? What process to make it work?”

use Airport Utility manual set up button and place the secondary router in bridge mode then configure your wireless setting.

Extending Time Capsule wireless network with an Airport Extreme

Hello - can anyone please advise about extending a wireless Time Capsule network by adding an Airport Extreme?
I've looked at the Apple support advice - http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US -
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n) -
but I couldn't seem to make it work. I don't know if it is different as I'm using Mountain Lion, but I cannot seem to locate a '

Temporarily, move the AirPort Extreme to the same room or general area of the Time Capsule, power it up, and wait a full minute.
Then, hold in the reset button on the back of the AirPort Extreme for 9-10 seconds, then release. Allow a full minute for the AirPort Extreme to restart to a slow, blinking amber light.
Close AirPort Utility if it is open.
Click the fan shaped AirPort icon at the top of your Mac's screen. Wait a few seconds for the listing of New AirPort Base Station to appear.
Click on AirPort Extreme just below that and AirPort Utility will open automatically open and analyze your network settings. In the example above, this is shown as an AirPort Express. In another minute, you will see that it will configure the AirPort Extreme to "Extend" the network.
Enter a device name that you want to use and click Next
Wait another minute for AirPort Utility to configure the AirPort Extreme. When you see the message of Setup Complete, click Done.
Move the AirPort Extreme to a location that is approximtely half the distance from the Time Capsule to the area that needs more wireless coverage and power it up.
You are all set.

How to integrate Jboss seam frame work with Jdeveloper 11

hi
Really i don't know how to integrate Jboss seam frame work with JDeveloper, actually my current project implementation was started with Netbeans, but i am planning to suggest my customer , use JDeveloper.
please provide the solution are any information, how to integrate the JBoss Seam frame work.
Thanks
Lakshmi

Hi,
JDeveloper 11 does not yet provide documentation about the integration with Seam (not only the technology but also the documentation is in early preview stage). However, this is an interesting question you ask and I'll follow up to see if we can get some document out in short term.
Frank

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

Set up your "main" router to use the OpenDNS servers, and the Time Capsule will automatically pick up those settings. No configuration is needed on the Time Capsule.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How do I access the data saved on my time capsule? for example, if i try to view my photos it tells me that i have 2.4gb of photos and gives me the option to "view with iPhoto"....but when i click on "view with iPhoto" nothing happens... thanks!

how do i access the data stored on my time capsule? for example, if i try to view a photo, i get the option to "view with iphoto" but when i click on "view with iphoto" nothing happens. i'm having similar trouble openning up movies, music, etc. it appears as though the files exist / saved on the time capsule (because i can see how much storage they consume), but i can't open them. thanks!

Unfortunately, Apple removed the feature to "browse backups" in Time Machine backups of iPhoto a few years ago.
You have to restore the entire iPhoto library to a separate location to be able to "see" it, and then choose the specific images that you want use.
For complete details, see #15 in Pondini's excellent support document Time Machine -- FAQ. Check the information in the pink box there.
Frequently Asked Questions

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

Remember security on a TC is an illusion.
Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
Remember this the next time because anybody at all can change your passwords.
Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
Voila .. all your passwords in plain sight to any Tom Dick and Fred.

How to integrate AT&T U-Verse with existing Time Capsule wireless network

Similar Messages

Maybe you are looking for