How to Integrate B2B into Portal(7.0)

Dear sirs,
I have installed a CRM 5.0(sp7) based on ABAP and JAVA. The JCRM is installed on the same WAS while the PORTAL(7.0) is installed on another WAS(different form the CRM WAS).
The ISA user management is based on CRM backend, which means that I can use SU01 to edit the B2B user.I also configured the PORTAL UME based on the CRM backend so that I can also edit the B2B user in the PORTAL user management. Now both B2B and PORTAL are based on the same user datasoure. Here is my first question:is this system landscape available for a company who want to use CRM B2B scenario? Because I once heard that EP and JCRM must be installed in the same WAS.
The second question is: When I want to make B2B pages available in PORTAL, is using the URL iview the only way?
For example, I want the URL:https://gwcrmdev:50101/b2b/b2b/init.do?scenario=B2BScenario&umelogin=NO displayed as an iview in PORTAL. I can't found any other way except using an URL iview. But I could see these parameters in the catagory of 'ISA B2B' of PORTAL system defination:
ISA B2B Description: GWB2B
ISA B2B Host Name: gwcrmdev.com:50101
ISA B2B Path: /b2b/b2b/init.do
ISA B2B Protocol: https
I don't know clearly about what use of those parameters. Because when I want to create an ISA iview(from template CRM generial IS iview), I can not find the system field to let me fill the alias 'SAP_CRM'. I also check the 'SHOP' iview in the PCUI package, and I can't find the 'SAP_CRM' too. When I preview this iview, it throws the Portal Runtime Error. Then there is the third question in my mind: How SAP make the iview 'SHOP' connect to the right B2B system? Is it the same problem that we must install EP and JCRM on the same WAS or you can't view the ISA iviews like 'SHOP'?
Your experience will be highly interesting.
Best regards,
Vincent.

Hi Vincent,
For the second question the answer is
After you create the CRM system object, Right click the system object and choose system alias. Then give a name for the system alias.
After doing this, When you create the iview it will ask for the system then you can select the system alias.
Regards
Arun

Similar Messages

How to integrate java into coldfusion MX7

I am beginner and taking training in coldfusion since 2
months.I want to know how to integrate java into coldfusion
MX7.

You might take a look at this doc -
http://livedocs.macromedia.com/coldfusion/7/htmldocs/00001557.htm
HTH,
Anne Sandstrom
Senior Technical Writer
ColdFusion
Adobe Systems, Inc.

How to integrate FOP into C# solution

hello i work with VS2008 C#.
and i have fop-0.95beta witch make a pdf files from XML and XSL.
i want to know how to integrate fop into my solution, and how to work with C#.
thanks a lot

quangcuong wrote:
as soon as possibleIn the future, don't say it so. Putting pressure is rude. You will either be ignored, or it will only going to take longer before you get an answer. [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html].
Back to your question: just put it in your jsp/xhtml page. Read its documentation what parameters it sends along the request and then catch them all in the JSF backing bean. You can either use ExternalContext#getRequestParameterMap() in the backing bean or use managed-property entries in the faces-config.xml to preset the properties of the (request scoped) managed bean after its creation using #{param}.

How to integrate OMR into Apex app?

Hi guys,
My app would be ideal for OMR data entry. OMR is Optical Mark Recognition. Remember marking answers on tests by coloring in bubbles? That's what I'm talking about. ScanTron is the market leader in the field. Anyway, can anyone share advice about how to integrate OMR into an Apex app?
Thanks,
Kim

Hi,
You can find lot of discussion from this forum how integrate devices like scanner or bar code reader with APEX.
And you might find that HTML and JavaScripts are not best chose to communicate with local devices.
Regards,
Jari

How to integrate JMS into WebLogic ?

I want to use JMS for Messaging but I don't know how to integrate it into my WebLogic Server.
Can anyone please tell me how I should integrate JMS into WebLogic?

Java Message Service (JMS) is a standard API for accessing enterprise messaging systems.
And WebLogic JMS is an enterprise-class messaging system that is tightly integrated into the WebLogic Server platform. It fully supports the JMS Specification.
Please refer to the following links to get more information on this and how to configure the jms resources:
http://docs.oracle.com/cd/E15051_01/wls/docs103/jms/fund.html
http://middlewaremagic.com/weblogic/?page_id=1976
Thanks,
Patrick

Integrate Xcelsius into Portal

Hi all,
I am new to Xcelsius. Now I am trying to integrate Xcelsius into Portal. What are all the steps, I want to carry out achieve this task. Can anybody give step by step solution for this?
I created .xlf file (sample of Filtered Rows). After this, what I want to do?
Helpful answers will appreciate.
Thanks & Regards,
Kathiresan R

Hi Shahid,
the easiest way to do a web publish of the excelcius dashboard in the SAP Netweaver Portal is as follows:
1) Generate your Excelcius Dashboard
2) Export dashboard to SWF file with HTML
3) Upload HTML and the linked SWF in a KM repository
4) Create KM document iview in Portal
5) Link the iview to the HTML you uploaded in step 4
6) Attach the iview into a page and then a role
7) Finally attach the role to a user .
This is only one of the ways of doing it. Let us know , if you need anything else.
cheers,
Shantanu

How to integrate Filenet into Knowledge Management

Hi,
How I can integrate Filnet into Knowledge Management?

Hi,
FileNet supports WebDav, so you can integrate FileNet as WebDav repository.
http://www.aiim.org/article-pr.asp?ID=23358
Check this to know how to Integration and Configuration WebDAV Repository Manager:
http://help.sap.com/saphelp_nw70/helpdata/en/4a/217fb6c33c6748a1715a161ac942cd/frameset.htm
The other way is to use existing FileNet Application Connector for SAP Enterprise Portal,
should ask help from FileNet guys to get some documentation.
http://www-306.ibm.com/software/data/content-management/filenet-application-connector-SAP-enterprise-portal/features.html?S_CMP=rnav
Hope this helps...
Regards,
Praveen Gudapati

How to integrate these into footage?

Hi
Anyone know how to do this 3D stuff integrating it with live action footage? Can we do this in MOTION 4? Not the 3D graphics, but rather the integration of 3D graphics with HD footage? And what software is used for these? 3D studio MAX or Cinema 4D or what?
How to integrate 3D GFX into footage? See this for examples...
http://web.me.com/kbcv/VideoWork/test.html
Thanks
K

You can do the second one (mario bros) with motion tracking in motion. The first one will require c4d or some 3D modeling software. Motion can composite the 3D sequence with the 2D video, but you'll need additional 3D tracking software... something like boujou, to get the tracking points on things like the book surface to integrate with 3D models.

Integrate WEBI into PORTAL

HI Gurus
I have a problem, i want to create an iVIEW in the SAP portal to call a report made in Webi.
is it posible ???? and how to make that?
saludos amigos

Hi Sogaard,
see below:
How does SAP recommend to integrate Webi-report in the SAP Portal? Is it through an URL iview, the iview templates (thumbnail, folder and alert) or through the Master Iview?
The sample iViews are just samples for a particular case. The iView template allows you to use any application on the BusinessObjects system - including the viewing of content. What you are looking for is the creation process for WebI. So you have 2 options: you can use the KM integration and you can build a java application that offers the workflow you looking for and integrate it with the iView template
Depending on what method should be used, I'd like to know which settings to be focused on. For instance, if the Master Iview is to be used, should opendocument be used instead of reports? And what other customizations will have to be done in order to integrate a Webi-report instead of a Crystal-Report?
OpenDocument is for viewing reports. The Installation Guide outlines the integration of the iView template and the KM part.
What is the intended use for the BOBJ repositoy manager? Would that be the way to integrate the Info-view?
This is the integration into the KM repository which provides a richer functionality then just an iView.
Ingo

How to bring content into portal

Hi, I am new to the portal world. The company i work for has their own "intranet" site and I want to bring some content from our "intranet" site into the portal. How do I go about doing this?

Hi,
You can do this in many ways.
One ideal way of doing it is by using an appintegrator.
You will be creating a system that points to the url.
Then you should be creating an iview to point to the system.
Then you can configure usermapping for this.
Please refer to the following link:
Step-By-Step Guide to implement Application Integrator
If you are directly using the url Iview then,you cannot access the content from outside the network.
You can also use a proxy in order to point to the intranet website.
A simple example would be to set up an IISproxy and create a web site(which can be accessed from outside).
This website will have pages which point to intranet content.This website url can be used in configuring a url Iview.
For more information on IIS Proxy,
you can refer to the Microsodt documentation on the internet.
You can also use other intermediary servers,
Regards,
Harish
Message was edited by: HARISH SUBRAMANIAN
Message was edited by: HARISH SUBRAMANIAN

How to integrate Sharepoint into EP7.0?

Experts:
We have a requirement to make our company portal as the entry point of Sharepoint where tons of documentation resides.
At the same time, we want that the Trex on our EP can index the document on Sharepoint.
Could you direct me to some how-to blogs ?
Thanks!

Hi,
1. Im not sure how docs are stored in sharepoint. If it is in some files system folder in sharepoint you can create a Windows FileSystem repository in EP and view them using KM navigation iviews
http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
2. Once you have a repository, you can use TREX to create an index on the repository and use KM search Iview to search and see the results.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/92323cb24e11d5993800508b6b8b11/frameset.htm
Regards
Srini

How to integrate applet into web dynpro java application

Hello Exprt,
I am struggling with integrating applet into WD applciation. I don't see any applet specific UI element. I would highly appreciate your help.
Thanks,
Shubhangi

Satyajit Chakra...
Please can you clarify what you mean that it has been deprecated?
We have a similar requirement and I have tested a method to do this on our NW 04 system that worked. But I really need to know what to plan for when we upgrade to 04s.
I am not sure if this is the right approach, but here's how I did it on our 04 system....I need to know if the approach I have taken below will work properly in 04s.
I built an HTML file in a string which contains javascript to launch the IXOS viewer applet...which is the "inString" below...
          try
               String html = inString;
               IWDCachedWebResource resource = WDWebResource.getWebResource(inString.getBytes("UTF-8"), WDWebResourceType.HTML);
               resource.setResourceName("HTML_inline.html");
               resource.setAttachement(false);
               resource.setReadOnce(false);
               wdContext.currentContextElement().setOut(resource.getAbsoluteURL());
          catch (final Exception ex)
               wdComponentAPI.getMessageManager().reportException(new WDNonFatalException(ex), false);
          IWDWindowInfo windowInfo = wdComponentAPI.getComponentInfo().findInWindows("PopupImageViewer");
          IWDWindow window = wdComponentAPI.getWindowManager().createWindow(windowInfo, true);
          window.setTitle("Image opening in separate window");
          window.setWindowPosition(25, 225);
          window.open();
          wdContext.currentPopupElement().setWindowInstance(window);

How to integrate BW and Portal

HI,
Can any one guide me how to connect portal to BW system.
I havent done it before.
Do we have to do SSO and User mapping?
can any one explain Step by Step procedure.?
are there any prerequsites?
Regards,
Mag.

Hi,
please go through following link
http://help.sap.com/saphelp_nw04/helpdata/en/2f/741a403233dd5fe10000000a155106/frameset.htm
Regards
Ben

How to integrate OPENPS into XI

Hi ,
Please provide step by step approach for integration of OPENPS into XI.
Thanks,
Anshul Walia

Hi Anshul,
pls do chk the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2486be46-0d01-0010-f8b5-c41c927ca446
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5bd723c2-0d01-0010-97a5-cb14fe7f2810
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2486be46-0d01-0010-f8b5-c41c927ca446
Regards
Sampath

Integrate jsp into Portal

Hi, our company currently has some jsp application with its own authenication mechanism based on database tables.
We would like to build a enterprise portal for documents control. We would like to use the employee hierachy tables in old jsp applications.
Does anyone could give me any approach, steps and tools for doing this integration?
I have batch upload users from old database tables to OID. What should be the next step?
Thank you so much in advance.
Kat

There is an sample application shipped with BI Beans 9.0.3 pre-release that shows integration with Portal. BI Beans 9.0.3 pre-release will be posted in a few days.
BI Beans Product Management

How to Integrate B2B into Portal(7.0)

Similar Messages

Maybe you are looking for