How to integrate exchange 2010 in oim 9.1.0.2

Hi all,
Present my company is running with the OIM version 9.1.0.2.
we are running with the exchange 2003.
scenario is
we need to upgrade exchange 2003 to exchange 2010.
could you please let me know the connector version for the exchange 2010 in oim 9.1.0.2.
Please suggest me the procedure for achieve this.
Thnaks,
-Valli

Hi srini,
thanks for your reply,
Actually we integrated with 2003 exchange server, and we need a new integration with exchange server 2010.
we don't want to disturb 2003.
We are confusing with connector versions and how to perform those things.
Thnaks,
Valli

Similar Messages

How to get Exchange 2010 Product Keys from an existing installed servers

hi All,
we are facing some kind of critical issues. we had 3 MB servers . the two servers are in DAG all our productions DB's running in DAG. the DAG servers are crashed due to hardware issues. one server is acting as archival server. all servers are running exchange
2010 sp3.
now we are trying to rebuild new servers to restore DB's. the new servers is prompting the product key to be entered. unfortunately we don't have product keys of exchange 2010. since we are gold partner we have partner network portal. when i tried to get
the product key from portal am able to see only 2013 keys. we called up Microsoft and explained but no use. they said we have to use exchange 2013. but we cant simply go ahead and migrate.
but the only option is we have exchange 2010 installed servers they all act as CAS/HUB server with the same licence. please let me know how do i retrieve exchange 2010 product keys from an existing servers. Please advise me its very critical.
can we get the product keys through some kind of scripts?
Thanks, Venkatesh. "Hardwork Never Fails"

Hi,
For this issue, I recommend you contact Microsoft customer service to consult this question. Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How to Migrate Exchange 2010 to 2013

am planning to migrate my existing Exchange 2010 Environment to Exchange 2013, My Existing setup as follows below.
2MBX Which is part of DAG, 1CAS/1HUB/1Archival MBX . Please advise me how to initiate and complete successfully.
OS : windows server 2008 R2 Ent.
Forest Functional Level : Windows server 2003
Domain Functional Level : Window server 2003
Also we have Gateway for external emails SPAM Filtering.
Thanks, Venkatesh. "Hardwork Never Fails"

You're in the Lync forums, I'd post this question in the Exchange forums:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrgeneral
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to get Exchange 2010 database size c#

I'm trying to get smallest Exchange database in my Exchange 2010 server using remote session.
I successfully connect to my exchange server and get database with properties. Some of them with value, but Properties "DatabaseSize" with Null value for each of them.
Did some body be able to get database size value?
For me important to use URI to connect Exchange DAG.
Part of my code below:
static void Main(string[] args)
string exchangePowershellRPSURI = "http://my.domain/powershell?serializationLevel=Full";
PSCredential credentials = (PSCredential)null;
//Provides the connection information that is needed to connect to a remote runspace
// Prepare the connection
WSManConnectionInfo connInfo = new WSManConnectionInfo((new Uri(exchangePowershellRPSURI)),
"http://schemas.microsoft.com/powershell/Microsoft.Exchange", credentials);
connInfo.AuthenticationMechanism = AuthenticationMechanism.Kerberos;
connInfo.SkipCACheck = true;
connInfo.SkipCNCheck = true;
connInfo.SkipRevocationCheck = true;
// Create the runspace where the command will be executed
Runspace runspace = RunspaceFactory.CreateRunspace(connInfo);
// Add the command to the runspace's pipeline
runspace.Open();
//Represents the base functionality of a pipeline that can be used to invoke commands
Pipeline pipeline = runspace.CreatePipeline();
Command getMDB = new Command("Get-MailboxDatabase");
getMDB.Parameters.Add("Identity", "*");
getMDB.Parameters.Add("Status", null);
pipeline.Commands.Add(getMDB);
Collection<PSObject> select = pipeline.Invoke();
if (select.Count > 0)
foreach(PSObject obj in select)
var db = obj.Properties["DatabaseSize"].Value;
string name = obj.Properties["Name"].Value.ToString();
Console.WriteLine("Database Name: {0} Size: {1}", name, db);
else
Console.WriteLine("Failed to create email account");
runspace.Dispose();
Console.ReadLine();

I found solution of my problem by myself. I just changed in string
getMDB.Parameters.Add("Status", null);
"null" to "true" like this:
getMDB.Parameters.Add("Status", true);
Now everything work fine for me.

How to configure Exchange 2010 to use a certain MX record that is unavailable with public DNS

Dear all,
as for TLS encryption I'm required to send emails destined for a certain domain via a dedicated send connector that has TLS encryption enabled/enforced. Thing is that the recipient's corresponding domain MX records cannot be resolved using public DNS. As soon
as I verify MX records for the recipient's domain using nslookup I only receive MX records that do not accept TLS. In order for TLS to work I'm required to send all outgoing emails to that specific domain via a certain predefined host, i.e. MX record, that
is known to me and Exchange needs to know as well. But how can I configure Exchange to use a certain MX record (that resolves to mxtls.<domain>.com instead of mx.<domain>.com without being available in public DNS?
Editing the hosts file directly on the Exchange server? Not an option, right?
Messing with my ADS integrated DNS not an option, too, as I then have to add all sorts of entries for that zone, e.g. www and stuff like that, to make it work?
I'm lost here, any help would be greatly appreciated.
Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

Well, I figured it out by myself. I just had to add the corresponding server, i.e. mxtls.<domain>.com, to the Smarthost configuration for the corresponding Send Connector and set its RequireTLS setting to $True.
Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

How do I know which update rollup is installed on my exchange 2010 sp3 server ?

how do I know which update rollup version is installed on my exchange 2010 sp3 server ?
Anand_N

And take a peek here:
http://blogs.technet.com/b/rmilne/archive/2013/10/29/how-to-check-exchange-2010-ru-version.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Relay issue from Unix across Exchange 2003 OWA server in Exchange 2010 environment

Hi,
I'm trying to resolve an issue. We have one Exchange 2003 server left in our environment. The rest is now Exchange 2010. We are working to decommission this server. Monitoring the SMTP logs, I am working with the various groups to get the traffic
off this server and onto the Exchange 2010 environment.
The issue we are finding is with a work flow. This Java app for eBis sends email to users. This is done correctly through Exchange 2010 and gets delivered from our HUB/CAS servers to the target user mailbox. This email has several links the user must click
for approving or rejecting requests. Upon clicking Approve, a new email window opens (we use Outlook 2010). The TO address is in the format of [email protected] Upon clicking Send, our Exchange 2010 HUB/CAS servers accept the
email, because one of our send connectors has, as address space, *.domain.corp. However, the email address being used it not an alias on any Exchange 2010 mailbox, so it appears Exchange 2010 is sending this email on to the Exchange 2003 server, which
also is an SMTP server. I *think* this server is looking at the address after @ to determine where to send it (ebisserver.domain.corp, which is valid in our DNS), and sends it on to that server, where the java "listener" program intercepts
the mail, processes it and then saves it to a file somewhere.
We are at a loss as to how to get Exchange 2010 to do this instead of Exchange 2003... once this traffic is eliminted from Exchange 2003, I can proceed with decommission of this server. Any help troubleshooting this issue is appreciated.

The only reason the Exchange 2010 server would route outbound mail through an Exchange 2003 server is that you have an SMTP Connector defined on the Exchange 2003 server that has a more specific domain than you have on the Exchange 2010 server. You
should be able to see all your Send Connectors (an SMTP Connector on Exchange 2003 looks like a Send Connector in Exchange 2010) by running Get-SendConnector.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Installation of Exchange 2010 in Windows 2012 Server

Hi all,
We are planning to upgrade our current Exchange 2003 to Exchange 2010, Need some help on installation and Support of Exchange 2010 in Windows 2012 Server, as per the
https://technet.microsoft.com/library/ff728623(v=exchg.150).aspx Exchange 2010 with sp3 is supported in Windows 2012 but I am unable to find the installer of Ex 2010 with sp3
in web even in MSDN. There is only Ex 2010 with Sp1 available. I know that after installing ex2010 with sp1 version, I can install sp3 later but I found one link
http://www.petenetlive.com/KB/Article/0000785.htm where it is mentioned that insllation can be done only after doing the registry settings.
So is any one who has installed Ex 2010 in Windows 2012 Server and faced this issue and any solution.
Thanks
Mukesh
Mukesh Bisht

You can easily install Exchange 2010 (SP3) on Windows Server 2012. If you are working with previous SP version’s you can easily upgrade after installing server. And registry settings
are used to fix an error which may occur during migration, so it is not mandatory to correct registry settings each time during migration.
You can find detailed information about installing Exchange 2010 (SP3) on Windows Server 2012 at this blog :http://oxfordsbsguy.com/2013/03/24/how-to-install-exchange-2010-sp3-on-windows-server-2012/

Exchange Server 2013 OAB Web Distribution Configuration in Exchange 2010 & 2013 Coexistence.

Hi,
We have OAB Issue for Exchange 2010 Users in our Organization.
We have Exchange 2010 and Exchange 2013 Coexistence.While Checking in Exchange Server 2010 Server OAB properties in Org Configuration--> Mailbox-->OAB Properties -->Distribution we are not seeing any CAS servers and Its Grayed Out.
Please let us know How to add Exchange 2010 CAS in Exchange 2013 Web distribution.

They made alot changes with the OAB in Exchange 2013, and it doesn't really function in the same manner as it did in 2010. It might be best to take a look at the following blog posts from the Exchange Team, they should give you a better understanding
on how it works and how to manage it going forward.
http://blogs.technet.com/b/exchange/archive/2012/10/26/oab-in-exchange-server-2013.aspx
http://blogs.technet.com/b/exchange/archive/2013/01/14/managing-oab-in-exchange-server-2013.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Exchange 2010 Management Role loading slowness

Hello,
I'm new to the company I currently work for and relatively new into IT, and one of the first issues I have noticed here is how incredibly slow Exchange 2010 is when loading.
I'm aware there are numerous topics covering this issue after having done many checks on search engines, however most of them seem to advise going to IE and un-checking the boxes defining Certificate Revocation or other solutions that I haven't found to
be applicable, at least not to my knowledge. I have tried the first suggestion but found this made no difference.
We don't get any error messages when loading but it is generally a little slow, however the issue is where it says "Getting management role information for: domain/user info etc...", at the end of the progress bar. It will sit there for
6 minutes before finally loading and allowing me in. This happens every time you use it also, not just the first time, whether it's on the local machine of anyone in IT or on the server.
I've checked the server's available resources and it seems to be more than enough, although it is a virtual server so I'm not sure whether that changes what the issue could be.
Would anyone be able to help point me in the right direction of what I could be checking for? Sorry if this is a really vague question or I've not provided enough detailed information, but any help would be really appreciated. I'm sure one of the more experienced
members of my new team could take a look but I figured I'd try and make a good impression!
Apologies if this is in the wrong forum section also.
Thanks very much

Hi
Thanks for the reply.
We're on Exchange Server 2010 SP3 (14.03.0158.001), as far as I can tell it's all up to date.
Server specs:
OS - Server 2008 R2 Enterprise, 64bit
RAM - 32GB
Processor - Intel Xeon E5-2690 @ 2.90GZ, 16 Cores, 16 Logical Processors
There's 433 mailboxes in total, spread over 19 databases (a database for each department), 17 of those being mounted and active.
Once I'm into the management console and can use the various features, the performance is generally fine, it's just that initial loading where it hangs.
Thanks

Setup Regional Namespace Exchange 2010

Hi All,
How do i setup regional namespace for my active directory so i can setup my exchange 2010 to use the regional namespace?
I currently have at my main datacenter contoso.com and would like to create another datacenter in singapore with sg.contoso.com and host my AD and Exchange there.
How should i go about doing this?
Do i setup a new forest called sg.contoso.com or add new DNS zone? As i want singapore user to join to sg.contoso.com and the exchange server will have a DAG between SG and Main Datacenter
Thank You In Advance

Hi Emmanuel,
According to your description, I understand that you want to deploy another exchange server in Singapore.
We can create a child domain or deploy a site in Singapore. We recommend that create a child domain, so that we can implement individual domain name.
More information about it, please refer to:
Install a New Windows Server 2012 Active Directory Child or Tree Domain:
http://technet.microsoft.com/en-us/library/jj574105.aspx#BKMK_Workflow
How to setup exchange 2010 to child domain:
https://social.technet.microsoft.com/Forums/exchange/en-US/f9d609d3-a66e-4543-9157-d1eba7ad93e3/how-to-setup-exchange-2010-to-child-domain
Best regards,
Allen Wang

How can I display my MS Outlook/Exchange 2010 Calendar events on my web application's calendar?

I'm building a web (client) application (built in html/JavaScript/jQuery) that has a built-in calendar. I would like to pull in my Outlook/Exchange Calendar events
and display them in my web application's calendar. What is the best way to do that from a JavaScript/jQuery environment? I've been searching all over for plugins or examples of how to talk to Exchange/Outlook and retrieve Calendar events but I haven't found
a solution yet. We are currently using MS Office/Outlook/Exchange 2010. I don't need to modify the calendar events, just read them. (Note that I can't use an OWA Web Parts link
to display the calendar in an iframe; I need to have access to the actual event data so I can include other UI elements that I need for my application.) Thanks
in advance for the help!

Hi,
There's an old Java API for EWS, and you can access EWS with direct soap request to retrieve the data you want.
Cheers,
Fred
There's no place like 127.0.0.1

How to set default website for exchange 2010

I'm unable to launch the Exchange Management Console, and then I read that it's necessary to set the default web site in a particular way, in order for Exchange 2010 Management Console to work:
http://social.technet.microsoft.com/Forums/en/exchange2010/thread/4d396628-3867-4c95-9541-e0eb021e0135
However, after setting up Sharepoint, I see that it has modified the default website, and I'd like to ask for specific settings on how the default web site bindings should look (for exchange). Could someone please advise what I need to do to correct it?
I'm having trouble interpreting what Mike Crowley recommends in the linked post above, in terms of actual steps to the site binding information (which won't mess up what exists).
Currently it says:
Type           port         ip address        binding information
net.tcp
808:*
net.pipe
net.msmq                                         localhost
msmq.formatname                            localhost
http            80             127.0.0.1
https          443            *
http           80              *
https          443            127.0.0.1
It seems the line for http on port 80 is *, which I guess is equivalent to 'all unassigned'. Is the previous http port 80 binding to 127.0.0.1 causing the problem?
But I'm also supposed to set a Powershell VDir in IIS. Can someone provide steps for that?

Regarding SharePoint on Exchange:
It was not allowed earlier, as documented here:
http://office.microsoft.com/en-us/sharepoint-portal-server-it/coexistence-and-interoperability-guide-for-sharepoint-products-and-technologies-HA001160777.aspx & here:
http://support.microsoft.com/kb/825505 but there doesn't seem to be anything more recent than this. I would work under the assumption it is not supported outside of
SBS 2011 (which I am not very familiar
with).
Mike Crowley
Check out My Blog!

Trying to install SP1 for Exchange 2010 on Win Server 2008 R2. A pre-req is KB982867. It is no where to be found. How to find it?

The SP1 wizard says "Install Hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867
However, that link no longer exists.
How to get this hotfix?
Another post said that the Win 7 hotfix would work. Windows6.1-KB982867-v2-x64 But I can't locate that either.
How to fix?
john11

Hi John,
Exchange 2010 Service Pack 3 is the latest service pack. It is recommended to install it. Service Packs are cumulative, Exchange 2010 SP3 includes all fixes included in previous RUs and service packs. Here is a blog for your reference:
Exchange Server 2010 SP3
http://blogs.technet.com/b/exchange/archive/2013/02/12/released-exchange-server-2010-sp3.aspx
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

How to install Exchange Server 2010 with the name of my existing Domain Controller.

I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)

Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

How to integrate exchange 2010 in oim 9.1.0.2

Similar Messages

Maybe you are looking for