How to Integrate SAP with Solid works?
Hello Experts,
My customer is asking to do some research on integrating SAP with Solid works. I don't have any Prior experience on this. Can any one give me some inputs on below questions
1) How to Design the interface between SAP and Solid works?.
2) Is it better to Design our own Interface or better to Buy some third party tools?.
3) Please give me some best Third Party tools for this purpose?.
Thanks a lot in advance...
Regards,
Mohan.
Hi,
...or Option 4, use the SAP - SolidWorks Integration. At the service marketplace at http://service.sap.com/plm or directly at http://service.sap.com/~sapidb/011000358700003638082001E/GEDAS_SOLIDWORKS.htm you can find more information about this SAP product.
Best regards,
Martin
Similar Messages
-
How to integrate Jboss seam frame work with Jdeveloper 11
hi
Really i don't know how to integrate Jboss seam frame work with JDeveloper, actually my current project implementation was started with Netbeans, but i am planning to suggest my customer , use JDeveloper.
please provide the solution are any information, how to integrate the JBoss Seam frame work.
Thanks
LakshmiHi,
JDeveloper 11 does not yet provide documentation about the integration with Seam (not only the technology but also the documentation is in early preview stage). However, this is an interesting question you ask and I'll follow up to see if we can get some document out in short term.
Frank -
How to Integrate Portal with SAP OFFICE(Please help me)
Hello Experts,
I have doubts on Portal and SAP office..
Please find the
1) How to show the document info record(DIS,like cv03n or cv04n) in Portal
Please let me know the step by step procedure...
2) After showing the documnet info record(DIS) in the portal,If user clicks on
original attachmnet of documnet info record(DIS) it shoud show the drawing
or diagam in the word or any uformat using SAP OFFCIE:
How to Integrate Portal with SAP OFFICE
Please let me know the details.
Please mail me any documents related to this to my mail id
[email protected]
Thnaks in Advance
Preethi DSouzaHi Dharani,
Please check this thread.
How will do the connectivity with SAP and Non Sap System
Also ensure you avoid cross-posting. This has been mentioned to you multiple times earlier.
Cheers,
Sandeep Tudumu -
How to Virtual cube with services works
Hi,
How to Virtual cube with services works.
can anyone provide me a realtime scenerio.
if possible provide some code.
Thanks,
cheta.For which functinality you are trying to create VC with services.
This is mostly used in SEM BCS.
You have to create cube similar path like normal cube, but select in the properties virtual cube, services.
There is a standard FM which connects the Virtual cube to the required cube in BCS. ( this is done by BCS data basis generation function) and we have to do nothing for FM.
In BCS we use virtual cube only for reporting purpose, since standard BCS cube cannot be used for reporting. hence what we do is create another virtucal cube very smiliar to BCS cube.
Then both the Virtual cube and BCS cube are connected by standard FM. -
How to integrate EBS with OBIEE 11.1.1.7.1
Hi ,
I would like to know , how we integrate EBS with OBIEE11g(not OBIApps) for finance module(GL,AP,AR).
What steps we have to do for integration.
Req - When a EBS user logs in he has to see details in obiee based on his ledger assigned to him.
Iam able to integrate EBS with OBIEE, able to move from ebs login to bi, but what required is security .
Any help please...Check these
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e16364/ebs_actions.htm#CJAFDEIB
http://www.astcorporation.com/images/PDFs/White_Papers/2012/AST_White_Paper-EBS-OBIEE_11g_Integration.pdf -
How to Integrate SAP EP with SAP PI to send data for creating reports in BW
Hi Gurus
I am struck with an Object/Interafce Creation in my project. My requirement is to Integrated SAP Enterprise Portal and SAP BW using SAP Pi. I am working on SAP PI7.1. The SAP EP sits on the Oracle Database and it will send some data required for generating some reports in BW.
My question is how to integrate the above systems by which adapters and which will be the best approach. If we use PI, the major advantage is we can Monitor the flow of the messages .
Cant the BW System directly talk with the SAP EP System. If there is an approach, can we monitor the message flow with out PI involvement.
All the above mentoined systems(SAPEP,SAPPI,SAPBW,SAPSRM,SAPABAP) are in the client landscape only.
Please suggest me the approach.
Thanking youHi rajshekar
Thanx for the reply
In the current project we are having an Interafce which is a B pass sceanrio from MDM to BI; MDM is dat , pi is picking the data by Sender File CC and Posting the Data to BW by using Receiver File CC. this does not involve any developemnt of ESR Objects.
My current requirement also seems to be the same Pick thhe date from SP Portal and give it to BW for generaiting reports.
Can i use the SOAP at sender side and File at receiver side with out the involvement of ESR Objects.
Does the By Pass aprroach work for this aprticular interafce.
How can we integrate SAP EP with BW withour Pi?
please share any blogs or forums
please help
Thank you
Edited by: VArjun86 on Jan 4, 2012 10:27 AM -
How to Integrate SAP R/3 ECC 6.0 with XI3.0 or PI7.0
Hi,
I am having access to one SAP R/3 ECC 6.0 server through internet.
I have stand alone SAP Net weaver PI 7.0 installed on my laptop.I do not know how to integrate both ,I mean to say that what are the steps I need to follow so that two systems can talk to each other.
Appreciate your details.
Thanks and Regards,
ViswanathHi,
It will be possible to do all the configurations related to RFC destination and partner profile as the experties have mentioned in above posts.
You need to also check with the way you could be able to access the SAP R/3 ECC 6.0 server through internet.
When you establish a connection to a client through a destination, the HTTP connection must first be entered in transaction SM59.
There are two types of HTTP connection in transaction SM59: Call transaction SM59 to display the different RFC destinations.
The HTTP connection to the external server (connection type G) and the HTTP connection to the R/3 system (connection type H) are different only in their logon procedures. Their technical settings are the same. To display the technical settings, double-click a connection.
You can choose from three tabs. Under Technical Settings, you can specify the following:
· Target Host: The host to which you want to connect.
Note that if you are using HTTPS as a protocol, you have to specify the full host name (with domain).
· Service No.: Here, you specify the port. The destination host must of course be configured in such a way that the specified port understands the corresponding protocol (HTTP or HTTPS). See Parameterizing the ICM and the ICM Server Cache.
· Path Prefix: At the time when the connection to this destination is initiated, the system inserts this sub-path before ~request_uri.
· HTTP Proxy Options: Here, you can configure a proxy for HTTP connections: You can determine the proxy host and service, as well as users and passwords for the HTTP connection.
The tab page Logon/Security will be different depending on whether you have selected a HTTP connection to an external server (connection type G) or a HTTP connection to an R/3 system (connection type H).
HTTP Connection to an External Server (Connection Type G)
Choose the connection you want to use. You can choose from the following logon procedures:
· No Logon: The server program does not request a user or password.
· Basic Authentication: The server program requests a user and password. Basic Authentication is a standard HTTP method for authenticating users. When a user logs on to the target system, he or she provides a user ID and password as authentication. This information is then sent in a header variable as a Base 64-encoded string to the server, through the HTTP connection.
· SSL Client Certificate: If you use client certificates for authentication, the client authentication is performed through the Secure Sockets Layer (SSL) protocol. In this case, you must also select the SSL Client PSE of the SAP Web AS that contains the relevant certificate for the authentication. The target system must handle the issuer of the SAP Web AS client certificate as a trusted system.
Under Logon/Security, you can also activate SSL to ensure that HTTPS is the protocol used (if you select SSL, make sure that the correct port is entered under Technical Settings). In the security transaction STRUST you can determine which type of SSL client is used. (Getting Started with the Trust Manager, Trust Manager).
The field Authorization for Destination has been implemented as an additional level of protection. We recommend that you specify a user and password for the RFC destination.
Thanks
Swarup -
How to Integrate SAP R/3 with Netweaver PI 7.0
Hi,
I am having access to one SAP R/3 ECC 6.0 server through internet.
I have stand alone SAP Net weaver PI 7.0 installed on my laptop.I do not know how to integrate both ,I mean to say that what are the steps I need to follow so that two systems can talk to each other.
Appreciate your details.
Thanks and Regards,
Viswanathhi,
in R3 ECC
u create tcp/ip RFC's LCRSAPRFC and SAPSLDAPI.give these destinations in PI j2ee visual admin...JCORFC PROVIDER.
Tcode SLDAPICUST....give the setails of PI server hostname and iser PIAPPLUSER password..
then go to Tcode SXMB_ADM
integration engine configuration role of the business system application server
destnation http://<host>:<HTTPport>/sap/xi/engine?type=entry
then save
regards
ajai -
How to integrate sap bw and sap pi system
Hi all,
I am doing interface to integrate SAP BW and SAP PI syetms .here i want to send data from SAP BW infocube to pi after that i need to send the data sap apo system.sap bw and sap pi intergration part is pending so how integrate these two systems and how to send data from infocube i am not clear abt process.i came to know tht do with proxy.but process i dont know clearly.
Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful.
Thanks
SG>> Can anyone tell me the process to integration process and any outbound sap bw to pi scenario blogs are information is very helpful
Basically you need to use client proxy.
A) Create data type , mesg typ, service inteface, message mapping and interface mapping as usual in ESR
B) In Integration Directory, YOu dont need sender communication channel and sender agreement. Because you are using client proxy. rest are all same
C) You need to do proxy configuration between SAP BW and PI to establish connection
Note: PI to sap apo system communication is already known. Then in PI target message follow that system structure in ESB and use the supported adapter for that system in Integration Directory.
Hope this helps -
How to Integrate SAP Business One to R/3
Hi guys,
I have one client, this client is having the one head office and two branch offices. in the Head Office SAP R/3 is implemented
Now the Client wants to implement SAP Business One in the branches. and want to integrate SAP Business One to R/3.
i.e; if in the branch office creates Purchase Order then Automatically should create the Sales Order in SAP R/3.
This is the one Scenario. their are lot of scenario's.
Thanks in advance.Shiva,
Apologies as I am not sure what the question is. If your question is can you integrate SAP Business One with R/3 ... then yes using the SAP Business One Integration for SAP NetWeaver or B1i. You can find more detailed information on B1i on SDN here ...
SAP Business One Integration for SAP NetWeaver (B1iSN) [original link is broken]
HTH,
Eddy -
How to integrate iReceivables with third party payment system?
Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
SunitaHello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala -
How to Integrate Seibel with ADF ?
Hi All,
JDev Ver : 11.1.1.5
We need some Information about Seibel integration with ADF
So for we use to Integrate Seibel with the help of Web Services. We need the Is there any other approach for the Integration ?
I have gone through below link and got some information about JCA adapter, and URI based approach. If we use this, how to implement in the development part,
http://siebel-essentials.blogspot.com/2011/02/first-encounter-with-sai-ofm.html
We don’t know exactly how to do the implementation like if you want to retrieve/update some values to Seibel from Jdeveloper ADF using the above approach.
Is there any other approach for the Seibel integration with ADF ?
Thanks,
GopinathThe blog you point to seem to show an example of using a REST service exposed by Siebel.
ADF allows you to create data controls based on REST services and then build the UI on top of them through the URL data control.
See step 4 of this tutorial:
http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_53/jdtut_11r2_53.html -
How to integrate cProjects with R/3 to get the Material Classification Data
Hi all,
We are installing the cProjects and we have to integrate it with R/3 to get the Material Classification data.
Is any one has developed the object link, which links cProject and Material Classification data in R/3?
Thanks in advance.
Regards.Hi Venkat,
Refer SAP cProjects Guide for Implementing an Object Link. This Guide also includes User Defined Object Links.
You should be able to find it on SAP Service Marketplace. In case you cannot, pl send me your email ID, I will mail the same to you.
Regards,
Reema.
Pl award points to all useful answers. -
How to Integrate ECC with Payment Gateway
Hi Gurus,
I need your help. We have one requirement.
Here is the scenario.We have one custom screen for direct sales in stores. The user scan the articles and enter the price, and ask the customer to pay by card or cash.
If the customer wants to pay the amount by cash, then user enters the amount and clicks on cardpay button.
Here after the payment has to be taken care by the third party payment gateway (XYZ).
Now I need to integrate ECC with third party payment gateway. If you can post any docu2019s related to this, or any form of help is highly appreciated.
Please let me know if you are not clear or any concerns.
Thanks & Regards,
Shiva Reddy.Hi shivach ,
There will be lot of way to achieve this, I want to suggest one of the possible way :
If there is Third party agreement is done to collect the payment then from SAP end you need to do two things.
1. Outbound from SAP : when user clicked of Card Pay button then take the all mandatory validation if required from your end and generate a Payment Referenec Number and redirect to the Third party URL with details like amount Payment Reference No., customer card No. etc...,
2. Inbound to SAP : once the Third party gets the confirmation of payment then they have to revert back to your SAP system with the detail's to synchronize the payment with the following parameters like : same payment Ref No., Unique transaction reference No. what they have generated from there end, customer card no. for further verification at your end and with the payment status saying Transaction is Success of fail. for that you can prefer to use Custom IDOC.
Since payment and all is highly secured transaction so that you can discuss with your third party to get the double verification before getting the payment finally confirmed, for more secure transaction use Encryption Decryption concept. -
How to integrate KM with other Content Management Systems
Hi all,
The requirement is to integrate KM with third-party Content Management Systems like Documentum, Interwoven, fileNet etc. Related documents/tutorials can also be shared.
Helpful answers will be rewarded for sure.
Thanks in advance.
Regards,
ShankarHi
These links may be useful
Need to get a SAP NetWeaver component implemented quickly? Try SAP Best Practices
http://www50.sap.com/company/press/factsheets/solution/ep.asp
http://sap.ittoolbox.com/topics/t.asp?t=421&p=421&h1=421
http://blogs.ittoolbox.com/km/portals/archives/001903.asp
http://www.documentum.com/literature/literature.htm?uq=False&printReady=True
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/knowledge management in enterprise portal.pdf
Maybe you are looking for
-
Created a new SharePoint 2010 List Definition project, Sandbox deployment option. List Definition type: Documents Library. When attempting to save into the document library from Microsoft Word 2010 I get "The webpage no longer exists" error in the Fi
-
Safari hangs when loading web pages.
I'm new to the Mac and had my machine less than a week. However, I'm having problems with Safari/Internet. Generally it's fine, but from time to time Safari hangs and it can take a few minutes for it to spring back into life and load the desired web
-
How do I add a new camera so I can still shoot in RAW? my new camera is not recognised.
Hi! I have Photoshop Elements 11 and I started with a Canon 1000D, I was able to shoot in raw, then convert my images to JPEG for sharing. I have since upgraded cameras and when I upload a RAW file off my camera card, it immediately makes a copy of t
-
When I Load a .exe File, It Doesn't Open And Says, "Success".
Why Is This Happening? Next to the "Success." Word It has a picture of an X. Could someone please tell me what is going on? Thanks!
-
I'm trying to combine two collage courses... Problem is I don't really KNOW where to start. I've got this great little java program. I worte it with a total of four files all ending with .java. What I'd like to know is where to look to find out how t