How to integrate the Process flow design into Workflow?

Hi Guys,
I created a process flow design in OWB. Now I need to integrate this design into Oracle workflow. How can I implement it? Process flow design is saved as an Jpeg or SVG file. Pls suggest the steps how can I do this? Im new to workflow and owb. Im using OWB 10g.
Regards
Kishan

If you deployed the packages to the same location then the second deployment replaced the result of the first one (actually a new version of the process flow was created). You can execute only the latest version...
Regards,
Robert

Similar Messages

How to specify the Process Flow Module with SQLPLUS_EXEC_TEMPLATE.SQL ?

Hi, we have a couple of process flow modules that have PF Packages and Process Flows with the same name.
E.g
PFMOD1 (Module)
FILELOAD (Package)
PF1 (Pf)
PFMOD2 (Module)
FILELOAD (Package)
PF1 (Pf)
Normally we can specify "FILELOAD/PF1" as a paramater to the procedure SQLPLUS_EXEC_TEMPLATE.SQL in order to initiate the running of an OWB process flow but how can the system distinguish between modules ?
Anyone done this ?
Thanks
Paul

If you deployed the packages to the same location then the second deployment replaced the result of the first one (actually a new version of the process flow was created). You can execute only the latest version...
Regards,
Robert

How to run a process flow in recovery mode

Hi,
I have 10 Mappings in a Process Flow. While executing that process flow, All of sudden It got errored out at 5th mapping.
Please explain me how to run the process flow again from the 5th mapping( which got errored out in the previos run)....i.e I do not want to run the first 4 mappings in that process flow again, I want to run only the remaining mappings in the process flow.
Please let me know in case you need more information / explaination.
Thanks in advance...

Hi
On the question of process flows and resuming the following article gives some ideas, it has to be designed in the process flow basically;
http://www.rittmanmead.com/2008/05/resuming-your-etl-process-in-owb/
The article describes some ideas and techniques for tracking success/failure of flows and restarting.
Cheers
David

Scheduling the Process Flows in Oracle Warehouse Builder

Hi,
Can you please let me know how to schedule the process flows.I mean to make the process flow to run on a daily, weekly basis etc.Where exactly we need to schedule the process flows.
It would be great if you can help me out.
Thanks
Vinay

You can schedule process flows the same way as you schedule mappings. See the following viewlet regarding the scheduling of OWB activities in Oracle Enterprise Manager (OEM):
http://otn.oracle.com/products/warehouse/htdocs/oem_scheduling_viewlet_swf.html
Regards:
Igor

How to pass execution_audit_id of the process flow to an external process

Hi,
I'd like to execute this sql
SELECT EXECUTION_AUDIT_ID
FROM RUNTIME_OWNER.ALL_RT_AUDIT_EXECUTIONS
within a process flow, and pass the returned value to an external process(within the same process flow) which is a unix script. Is this doable? How can it be accomplished?
Thanks!

Hi Patrick,
Yes, I did look at those threads, but they don't help me with what I am trying to accomplish. Here is the design
The map runtime audit id value is used to uniquely name a file created by one map. Within the process flow, which contains the map that creates this file, I need to rename the file using a suffix string provided by the user. So, if file created is med_admin_1234 (1234 is map runtime audit id), and suffix is "fac_a", then new filename is med_admin_fac_a. For this renaming functionality I am using a Unix script (file is created in a Unix server), but I need to pass the map runtime id that's part of the initial name in order to rename the file. Makes sense? Within the process flow, I need to retrieve a value (instead of an input parameter, have like an output parameter instead). Not sure this is doable, but asking just in case.
Thanks.

I just updated my iPhone 4 to iOS6. In the process, I ran into a problem and had to restore factory settings. After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "manage local device storage usage." How?

I just updated my iPhone 4 to iOS6. In the process, I ran into a problem and had to restore factory settings. After syncing the phone, I see that 218 apps need to be updated. When selecting "update all," it says "Cannot Download. There is not enough available local storage to download these items. You can manage your local device storage usage in Settings."
How can this be the case when I haven't changed any apps from before updrading to iOS6, and I don't have any music yet on the phone? Why is it telling me there is not enough local space?

Hi RileyAvaCadenRiver,
If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
Apple: iTunes 11.1.1
http://support.apple.com/kb/DL1614
Regards,
- Brenden

How to insert PO details in an ADF based form and initiate the process flow

Hi All,
Could any one let me know how to insert PO details in an ADF based form and initiate the process flow in oracle BPM. This ADF form will be custom one....How to create a ADF custom based form.Please let me know the step by step process..Am new to BPM
Thanks in advance,
sreevani

Hi All,
Could any one let me know how to insert PO details in an ADF based form and initiate the process flow in oracle BPM. This ADF form will be custom one....How to create a ADF custom based form.Please let me know the step by step process..Am new to BPM
Thanks in advance,
sreevani

How to integrate the E-Commerce b2b Application of CRM2007 into EP7.0?

HI all!
How to integrate the E-Commerce Business-to-Business Application of CRM2007 into the Enteprise Portal7.0 with SSO?

1) Configuration SSO creation
      Logon the portal
          http://<hostname>:<port>/irj/portal
          (exampl : http://abcd:51100/irj/portal)
           here is host name is : abcd, port is : 51100
Step 1 :    System Administrator
                         System configuration
                           Keystore Administration
                Click on u201CDownload verify.der file
        Save the verify.der file on your desktop
Step 2 : Logon to CRM system which is you need to backed system
               1) Execute the T-code STRUSTSSO2 in CRM system then it will appear "Trust
                    Manager for Single Sing-On with Logon Ticket" screens
Click on import certificate and select the downloaded verify.der file from desktop.
File format should be binary.
     2)   Click on ADD to ACL
     3) Click on "Add to ACLu201D in Certificate
      4) Enter the details
                 System ID : ABC ( this should be EP (portal ) SID
                 Client     : 000 (This should be 000)
                  Remaining are default.
                  Then press enter
      5) Save the settings
      6) You should change the parameter values through RZ10 in instance profile
           login/accept_ss02_ticket = 1
           login/create_sso2_ticket = 1
           after that we should restart the SAP instance.

Getting an process-flow audit id in the process flow itself

Hi,
I am using OWB 11gR2 and want to capture the audit_id of the process flow itself at the process-flow level.
I want to use this to pass it tru to the mappings in the process flow.
I know how to get audit_id when you're in the mapping (get_audit_id), but i want the audit_id of the process flow when i am "inside" the process flow.
When i have this i can let all of my mappings in the flow receive the same id.
When i setup a parameter at the process flow and specify get_audit_id there it errors on me.
Does anybody what to specify here ?

ok,
i figured it out myself and answered myself in another thread.
Basically it goes like this:
In the master flow you have sub-processflow objects which you want to pass along the audit_id of the master flow.
So that you can pass along the same audit-id to every mapping in all of the flows.
But it would be nice to be able to run sub flows independently from the master flows (for testing etc.)but still feed the same id(whatever that is) to the mappings in that process flow.
And on the lowest level this applies to mappings as well: be able to run a mapping and get a id to store in a field.
The same applies to feeding a process date to all the mappings in your flows(used for dwh purposes)
How does this work on the mappings ?
Create a mapping input parameter, put 2 params in it.
One date, one number. The date part is easy: just put SYSDATE in it.
The number part would ideally hold get_audit_id as default value. Unfortunately this generates an error.
So put default value of 1 here. Create a constant on the mapping with value get_audit_id in it.
Create expression that tests if input_param has something else than 1 as the value ; if so then there was no audit_id fed into the mapping by a process flow. Make the expression use the constant then. Use the output of the expression in your mapping.
How does this work in process flows ?
You'll have two different parts here:
-feeding from flow to a sub-flow
-feeding from flow to mapping
Flow to subflow:
You can not bind a flowparameter to subprocess paramter so you'll need to create 2 variables.(process date / audit id)
Create two parameters, one date with sysdate as default, one number with 1 as default.
Use assign operator to bind audit_id parameter to the audit id variable.
Use another one to bind to the same variable, but specify parent_audit_id as value instead of binding it to the paramter.
Use conditonal routing on these two assign operators to have one of these be executed.
This will ensure that the variabel either gets parent_audit or the value of the input parameter of the flow.
Use another assign op. to bind the date input to the date variabel.
Bind the parameters of the sub flows to the variables.
Flow to mapping:
Use the same procedure as descibed above. Only difference here is that you can bind a mapping parameter to a parameter.
This means that you'll don't need the assign stuff for the date parameter since you can bind the date parameter of the mapping to the input parameter of the flow.
Hope this helps someone ...

How to automate the data flow to content servers?

We have ECC connected to CS. Could you help tell how to automate the data flow into the CS? Thanks a lot!

What do you use the Content Server for? If its for archiving you need to run the STORE job to send the data to the CS.
I can't see a reason to automate that process
Regards
Juan

How to integrate the model build using Oracle10g

Hi All,
I am not getting an idea as how to integrate the model build using Oracle10g into existing application. Suppose i want to use the model then how to automate the whole process.

Could you give more details on what you mean by the whole process? Do you mean how to use a model that was built or automate the building of a model?
--Marcos

Process Flow Design

I'm looking for some guidance on a Process Flow Design.
Background -
I'm trying to develop a process, using OWB, to load 400+ tables into an ODS (external tables -> DB tables).
Can this be achieved in one process flow or do I need to create multiple process flows (smaller chuncks) or 400+ process flows?
Does any good documentation exist on this subject?
Thanks
Mike

Hi,
The .bat file looks something like this:
rem echo OFF
set ORACLE_HOME=c:\Oracle\ora10G1.0
set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
sqlplus.exe owbrt9204/owbrt9204@db @F:\BI_FlowScripts\run_process1.sql
There is one .sql flie associated with eac .bat file:
spool c:\BI_FlowScripts\Log\run_process1.log
variable ret_stat number;
DECLARE
REPOS_SCHEMA VARCHAR2(200);
LOCATION_NAME VARCHAR2(200);
TASK_TYPE VARCHAR2(200);
TASK_NAME VARCHAR2(200);
SYSTEM_PARAMS VARCHAR2(200);
CUSTOM_PARAMS VARCHAR2(200);
OEM_FRIENDLY NUMBER;
BEGIN
REPOS_SCHEMA := 'OWBRT9204';
LOCATION_NAME := 'BI_LOC_WORKFLOWS';
TASK_TYPE := 'PROCESS';
TASK_NAME := 'PROCESS1';
SYSTEM_PARAMS := ',';
CUSTOM_PARAMS := ',';
OEM_FRIENDLY := 0;
:ret_stat := PKG_RUN_REMOTE.RUN_JOB ( REPOS_SCHEMA, LOCATION_NAME, TASK_TYPE, TASK_NAME, SYSTEM_PARAMS, CUSTOM_PARAMS, OEM_FRIENDLY );
COMMIT;
END;
print :ret_stat;
exit :ret_stat;
The function RUN_JOB in the package PKG_RUN_REMOTE is the sqlplus_exec_template rewritten as a function which returns the job status (resides in the runtime schema).
We implemented this for OWB 9.0.4, and haven't really looked at it since, so there may be an easier way to do this in the latest version that I'm not aware of.
Roald

OWB | Passing input to mapping in the process flow

Hi,
I have a process flow which calls a stored procedure which returns 2 values.
I want to use the values returned from this procedure as an input in my mapping. My mapping has Mapping_Input_Parameters definined for these two inputs.
These values are going to be load_date and the batch it belongs.
I have created new params in the process flow edit under the mapping. The process flow executes successfully if I give the input params as a constant. When I do a binding with the out variable of the stored procedure I get a deployment error as "Internal error: OUT_D_LOAD_DATE cannot be converted to a constant value. Please correct the value. If the problem persists then please contact Oracle Support with the stack trace and details on how to reproduce it."
Please let me know how to resolve this and if there is way to get the load_date in the mapping without actually having to call the procedure in the mapping. The load_date will change everyday and I need to read it from a table.
Thanks!

Hi
If you have resolved the error please guide me also Since I am also facing the same error. (RPE-02040: Internal error: MYRAND cannot be converted to a constant value. Please correct the value. )
I am using 10gR2, Here my test process flow is
Start - > MyRand -> FindOddEven->end
Here MyRand function will return a value, the function findOddEven will just do a mod of 2 and return 1 for odd numbers and 0 for even numbers. When I bind the OUT parameter of the MyRand to the IN parameter of the FindOddEven it is throwing the same error.
Thanks in advance

How to Integrate HCM Process with Webdynpro ABAP Application

hi,
I have issue regarding how to integrate HCM Process with Webdynpro abap application.
I had created one HCM process for transfer using Hrasr_dt T code and also created form scenario and work flow.
How to Integrate HCM Process with Webdynpro ABAP Application
by
Parthasarathi

hi suhasini,
Thanks for your reply,
Can u explain in detail.. and Give any documents or links...
by
Parthasarathi

How to start/stop process flow from sql*plus?

Hi,
i know how to start a process flow via sqlplus_exec_template.sql, but i cannot find any information on how to stop (and rollback) a working flow from sql*plus. Any help would be appreciated.
Greetings
Christoph
Message was edited by:
ctrierweiler

Hi,
I've had a go.
How should I interpret the results of list_requests:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Er zijn geen rijen geselecteerd.
owner_owr@ORKDEV01>
Whilst a process flow is executing the last query will list executions, all of which have status BUSY:
owner_owr@ORKDEV01> @list_requests
====================
DEPLOYMENTS
====================
Audit ID Status Name Date Owner
2706 READY Deployment Fri Nov 11-NOV-05 10:49:59 OWNER_OWR
11 10:46:37 CET 2
005
====================
DEPLOYMENT UNITS
====================
Audit ID Status Name Date Owner
2707 READY Unit0 11-NOV-05 10:49:59 OWNER_OWR
====================
EXECUTIONS
====================
Audit ID Status Name Date Owner
394512 BUSY PF_ONB01 04-MEI-06 09:11:12 OWNER_OWX
395328 BUSY ONB:FULL_PREPARE 04-MEI-06 09:11:55 OWNER_OWR
395324 BUSY PF_ONB01:ONB 04-MEI-06 09:11:55 OWNER_OWR
owner_owr@ORKDEV01>
As an aside, I will attempt to get rid of the READY deployment and deployment unit using deactive_deployment.sql
Now, if I attempt to use deactivate_execution.sql on any of the executions with status BUSY I get:
owner_owr@ORKDEV01> @deactivate_execution
Voer waarde voor 1 in: 396136
declare
FOUT in regel 1:
.ORA-20003: The object is not in a valid state for the requested operation
ORA-06512: at "OWNER_OWR.WB_RTI_EXCEPTIONS", line 94
ORA-06512: at "OWNER_OWR.WB_RTI_EXECUTION", line 774
ORA-06512: at "OWNER_OWR.WB_RT_EXECUTION", line 90
ORA-06512: at line 4
owner_owr@ORKDEV01>
So all the seems to remain is to use abort_exec_request.sql
This does the job, but the script itself hangs.
I think it has to do with the l_stream_id not being checked again after the initial IF. I think it should probably be part of the loop condition as it is again reset in the do_acks inside the loop.
Cheers & thanks,
Colin

How to integrate the Process flow design into Workflow?

Similar Messages

Maybe you are looking for