How to integrate XI and third-party Payroll system?

Hi Experts,
We want to integrate third-party Payroll system with SAP through XI.
Can anyone provide me step by step guidance?
Which IDOC is useful? and entries should not go to FI tables.
Thanks in advance.
Regards,
Anirban

Hello Prasad,
Connection with an External Payroll System
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

Similar Messages

How to integrate iReceivables with third party payment system?

Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
Sunita

Hello Prasad,
Connection with an External Payroll System
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

OAB interfcaing with Oracle Payroll and Third party Payroll Systems

Hi,
I would like to know the things to take care when OAB interface with a third party Payroll(esp. ADP Payroll).
I know that the deductions are sent using the Benefit Elements which in turn connected with Rates for options/plans.
My questions are related to
1. How OAb would be able to get information like How many pay periods are pending(For calculating deductions for plans like FSA)
and
2. How the reconciliation work between OAB and the third party system(Like ADP Payforce)
Appreciate if you can share some thoughts
thanks
Anil Krishnan

user644268,
Depends on your exact requirements whether this attendance system is for the absense capture or work time logging. You need to be specific when putting up a scenario.
--Shiv

How to integrate DRM with third party tool for loading metadata in SQL table

Experts,
I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
Is there anyway we can customize DRM to execute queries or run batch
Can I have a basic example please.
Thanks in advance,
Regards,

1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
let me know if you have any issues.

CUCM mulitiple paging via ATA and third party paging system

We have several campuses in our school district that use an ATA connected to a third party paging system. A couple of the Schools are merging...and they wanted to know if we could in some way "link" the two paging systems so that they only have to call one extension when they page. We are currently using CUCM v 8.6.1
Thanks,
Greg

Yeah, that won't work, plenty of people had already tried that to simulate a paging system, you only get the connection to the device that answers the call.
The only possible way I can think of, assuming they're in the same physical area, is to actually fork the cable from the ATA to the paging system.
If not, they'll have to live with two DNs for paging.

Third party Payroll

Hi,
Our client wants to implement OM, PA, and positive Time Management. They are outsoursing payroll.
And they need integration between SAP Time management and 3rd party payroll system. Whatever the payroll process was done from 3rd party that should integrate with FI posting.
How to do this. any specail things I need to take care.
Yogita

Hi,
Any inputs please.
Yogita

How to configure PA48 for hiring/rehiring from third party applicant system

Hi,
We are building the interface between SAP and third party applicant system. There is no ALE/RFC possible, so we will develop a ABAP program to fill the interface table T752F from a XML file from the vendor system. We would like to use transaction PA48 for performing hiring transaction.
Question:
1. We need to use 3 differnt action types depending on whether it is external candidate/Internal candidate or re-hiring. How to default the correct action type? What are the configuration steps?
Would appreciate if anyone could share some documenation on the whole data transfer process.
Appreciate your quick reply.
Thanks,
Jaya

Hi Danish,
Yes, you can supply HR action type in the in the interface (T752f-massn), which will be defaulted when you run the hire action from PA48 screen.
Hope this is helpful.
Jaya

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
Also make sure you clear your browser cache before viewing you published files.

Question on Third Party Payroll Check in XML Publisher

Hi:
I have created an XML Third Party Check report that is based on the queries found in the seeded Oracle PAYUSGAR.rdf 115.24 check report. The patch 9211869 fixed an issue in the standard report where multiple checks for the same employee to the same payee for the same amount were NOT printing the correct garnishment reference number. I have reviewed the report code but have not been able to fix this same issue through XML.
My queries will produce all of the correct data except the 2nd duplicate (same employee to the same payee for the same amount) prints the reference number from the 1st element rather than the 2nd. Does anyone know how the check data is tied to the elements through the tables?
My example is:
Person: Max Doe Check: 1234 Paid to: California Agency Check Amount: 121.00 Pre_payment_id: 766297 Ref # 4567
Person: Max Doe Check: 1234 Paid to: California Agency Check Amount: 121.00 Pre_payment_id: 766302 Ref # 657AA
(Ref # 657AA prints on the second check as Ref # 4567)
The query from the report is:
SELECT peev.screen_entry_value garn_ref_no
,:check_amount
,TO_CHAR(pay_us_payment_pkg.get_trx_date(
:business_group_id,
:ppa_payroll_action_id,
NULL,
:ppa_payroll_id,
:ppa_consolidation_set_id,
:ppa_org_payment_method_id,
:ppa_effective_date,
:ppa_date_earned,
:ppa_override_date,
ppp.pre_payment_id,
ppa.effective_date
),'DD-MON-YYYY') payment_date
,TO_CHAR(ppa.date_earned, 'DD-MON-YYYY')
,prr_att.run_result_id
,peef.entry_information2 -- FIPS code
,peef.entry_information3 -- Medical Indicator
,paa.assignment_action_id
,pet.element_type_id
FROM pay_element_entry_values_f peev,
pay_input_values_f piv_att,
pay_element_entries_f peef,
pay_run_results prr_att,
pay_run_results prr_pay,
pay_payroll_actions ppa,
pay_assignment_actions paa,
pay_action_interlocks pai,
pay_pre_payments ppp,
pay_input_values_f piv_pay,
pay_run_result_values prrv_att,
pay_run_result_values prrv_pay,
pay_element_types_f pet,
pay_element_types_f pet_calc,
pay_element_classifications pec
WHERE ROUND(ppp.VALUE ,2) = :check_amount
AND ppp.pre_payment_id = :pre_payment_id
AND ppp.assignment_action_id = pai.locking_action_id
AND pai.locked_action_id = paa.assignment_action_id
AND ppa.payroll_action_id = paa.payroll_action_id
AND ppa.action_type IN ('R', 'Q')
AND ((paa.source_action_id IS NOT NULL AND ppa.run_type_id IS NOT NULL) OR
(paa.source_action_id IS NULL AND ppa.run_type_id IS NULL))
AND ppp.personal_payment_method_id = peef.personal_payment_method_id
AND peef.assignment_id = paa.assignment_id
AND ppa.date_earned BETWEEN peev.effective_start_date
AND peev.effective_end_date
AND ppa.date_earned BETWEEN peef.effective_start_date
AND peef.effective_end_date
AND piv_att.input_value_id = peev.input_value_id
AND UPPER(piv_att.NAME) = 'ATTACHMENT NUMBER'
AND ppa.effective_Date BETWEEN piv_att.effective_start_date
AND piv_att.effective_end_date
AND piv_att.input_value_id = prrv_att.input_value_id
AND prrv_att.result_value = peev.screen_entry_value
AND prrv_att.run_result_id = prr_att.run_result_id
AND paa.assignment_Action_id = prr_att.assignment_Action_id
AND prr_att.element_type_id = peef.element_type_id
AND peef.element_type_id = pet.element_type_id
AND pet.classification_id = pec.classification_id
AND pec.classification_name = 'Involuntary Deductions'
AND pec.legislation_code = 'US'
AND pec.business_group_id IS NULL
AND fnd_number.canonical_to_number(pet.element_information5) = pet_calc.element_type_id
AND pet_calc.element_name LIKE pet.element_name || '%Calculator'
AND pet_calc.element_type_id = piv_pay.element_type_id
AND NVL(ppa.date_earned, ppa.effective_date) BETWEEN piv_pay.effective_start_date AND piv_pay.effective_end_date
AND piv_pay.input_value_id = prrv_pay.input_value_id
AND UPPER(piv_pay.NAME) = 'PAY VALUE'
AND fnd_number.number_to_canonical(ppp.VALUE) = prrv_pay.result_value
AND prr_pay.run_result_id = prrv_pay.run_result_id
AND prr_pay.assignment_action_id = paa.assignment_action_id
AND prr_pay.element_type_id = pet_calc.element_type_id
ORDER BY prr_att.run_result_id;
Somehow, Oracle has fixed this in the rdf but I have not been able to figure out how exactly. This is a function call in the report but they are passing the check amount and the prepayment_id. Regardless of which pre_payment_id is sent in, 2 rows are returned.
If anyone has any thoughts, please let me know. This is the final tweak that is stopping our go-live with this.
Thanks, RL

In bug 6779249 it states that third party checks are not supported for XML...
But, as we have bought into the push to convert we now are down to payroll checks and third party checks to get our company off of Optio once and for all...
Other than attempting to write a complete custom process from scratch (just to throw out next year when we upgrade to 12) does anyone have any solutions to getting 3rd party checks to print with BIP in Oracle Applications (11.5.10)?
Scott

Third Party Attendance System Integration with Oracle Payroll

Hi,
How to integrate Third Party Attendance System like Bio-Metric System with Oracle Payroll. Please help me in this regard.
Thanks in Advance,

user644268,
Depends on your exact requirements whether this attendance system is for the absense capture or work time logging. You need to be specific when putting up a scenario.
--Shiv

How can I configure a third party VME board with A24 address space using a VME-MXI-2?

Hi!
We are trying to establish communications to a Galil Motion controller with a VME interface. Galil states that they are using a A24 address scheme with A16 data space for their board.
I am confused how to configure that board in the VME chassis properly.
The base address provided by Galil is 91Fxxx, I am assuming that the lower three nibbles are the registers that I can talk to?!
How do I set the address range under the resource setting for that board?
Also, I noticed in MAX that one board shows up with a slot number unknown, one with slot #0 and this board I have set to slot #1. I assume that the unknown part is for the PCI card that makes up for the 1/2 of the PCI to VME bridge?
The VISA VIs (Register based access) returns either a bus error, an invalid offset specified or data. However, we are completely in the dark when it does return data, since the expected offset we are typing in causes one of the two errors.
Our assumption of the problem is that we do not understand how to properly configure that third party board as a resource. It has also happened that the resource manager is hanging up the PC completely. Not even CTRL-ALT-DEL works and the MXI activity LED on the NI-VME-MXI-2 board stays on during the hand up.
We would appreciate, if somebody could walk us through the configuration process, step-by-step. Specifically, please explain how to setup the base address and how the offsets relate to this on a A24 address scheme. We are completely new to the VME bus interface, so even trivial things may be unkown to us.
We have browsed NI's page and manuals for explanations, however, we could not find any answers to our questions.
We noticed a formula for an A16 board that takes the base address and adds the logical address to it plus 40hex. Do we have to do the same or something similar to the A24 board????
We also came accross an option that would allow the board (NI VME controller) to share its memory with A24 or A32 space? Do we need to enable that? What is the purpose for that?
Best,
Markus Tarin
www.movimed.com - Custom Imaging Solutions
www.movitherm.com - Advanced Thermography Solutions

When I did not get a response here, I had to open a ticket with support. The short answer is that you cannot customize the SAML response when using Azure AD as an IdP.
Response from support:
I discussed the issue with senior engineers to get action plan for this issue. After doing research Senior engineers updated me that we cannot add a custom attribute to the default
SAML response of Azure AD.
Below is the link to get the list of available attributes
https://msdn.microsoft.com/en-us/library/azure/dn195587.aspx
As default SAML response from Azure AD , we have email address of the user sent out as attribute value for the Attribute " NAME ".
They suggested me to configure the application we are trying to integrate with Azure AD in such a way that it transforms the Attribute " NAME " into " EMAIL
This was not particularly helpful in my case as I did not have any control over the 3rd party which specifically documented that they would not extract the email address from the name attribute.
Cheers,
Jeff

How to do XMLDSig using third-party JCA providers?

Hi all,
Can anyone please let me know how to do XMLDSig using third-party JCA providers? The Sun XMLDsig documentation says that "A JSR 105 implementation SHOULD use underlying JCA engine classes, such as java.security.Signature and java.security.MessageDigest to perform cryptographic operations", but it doesn't say how to define the JCA provider programmatically. I don't want to change the Providers order in the security.properties file.
Do we need to make any changes in the JCA provider classes to work with XMLDSig and XML encrypt?
I'd appreciate your help.
Joe

How to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.

Employee Vendor and Third Party Vendor Posting Issue

Dear Experts,
I have an issue while Posting of Employee Vendor and Third Party Vendor.
In T706K table, maintained symbolic account offset entry MJ90 Wage Type but its asking for Symbolic Exp account too. Otherwise, while posting its says Trip has no postable entries.
I should get entry in FB03 as mentioned below
Employee Vendor (Dr)
Service Tax (Dr)
Third Party Vendor (Cr)
Awaiting for quick response.
Regards
Shaik

Hi Sieg,
Thanks for your reply.
Company has given Forex advance to employee via third party vendor
So, We need to debit the amount into Employee Vendor and Credit into Third Party Vendor
For Ex: Third Party Vendor is Thomas Cook (Forex Provider)
Please guide me how to post the above entry in Standard.
Regards
Shaik

XI and Third party systems are on diff OS which affects File adapter

Hello,
I hav ea sceanrio where XI is on Unix and third party system is on Windows.
We are using a file adapter to give data to third party.on third party system os level script reads this file.
When ever XI is file adapter is writing file that time only sometimes script tries to read the file and I guess here unix file lock mechanism is not understandable by script which read these files in third party.
At the same time third party is writing data and file adapter of XI reads that file, here also file lock mechanism is not recognised.
This is causing bad data read in XI and as well third party level.
Pl can you suggest how to resolve this.
thanks,
Sharada

HI Sharada
You need to use FTP. XI server's file adapter can access only files placed on its local directory.
In your case install a FTP server on your desktop and make file adapter connnnect to it .
More in this blog,
/people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
Cheers..
Vasu
** Reward Points if found useful **

Integrate Essbase with third party s/w (ETL)

Hi Experts,
I would like to integrate Essbase with third party s/w (ETL) which i am not sure have essbase adopters like DIM/ODI adopters available at e-delivery.
Essbase Version: 9.3.1
Third party ETL : CostIron (from IBM)
Any help will be highly appreciated
Regards
Kumar

Thanks John,
We would like to use CostIron which is ingegration solution (connect, transform and load) and claim that it requires no coding but configuration.
it means we should not require ODI for integrating essbase with Oracle EBS.
Please advice as you have deep insight in Hyperion.
Thanks and Regards
Kumar

How to integrate XI and third-party Payroll system?

Similar Messages

Maybe you are looking for