How to integration cProjects with SolMan
Hello,
I am new to Solman and working with cProjects for a couple of month. Now I was asked to hold an presentation about the use of SolMan and cProjects. Unfortunately I have no clue about SolMan and how to use in in conjunction with cProjects. Maybe some of you can help me to get started:
What can I do with it? What is it good for? Where can I find further informations regarding this topic?
Thank you,
Vanessa
Hi,
The one place I came across cProject in SolMan was in transaction SOLAR_PROJECT_ADMIN. This is where you setup Solution Manager projects (which could be for SAP Implementation, Upgrade, or ongoing support).
Also I read somewhere in documentation that apart from tracking the project progress in SolMan we can also use cProjects for detailed project management. I guess the features in Solman and cProjects would complement each other to provide a complete toolset for IT project management using Solution Manager.
Hope this helps.
Thanks
Devendra
Similar Messages
-
Hello,
I am new to SolMan und would like to use cProjects with SolMan. There the questions are starting
I have seen the documents of the ramp up but I have no clue if I have to set up the project first or not. I think yes.
When I want to connect an existing project (with the correct project type) to the project (in the solar_project_admin -> system landscape -> change request | activate change request management checked) the "assign cProjects Project" buttons is disabled?
What is neccessary to get it enabled?
How are you using cProjects in SolMan. I cannot get any good documentation and best practices about this (maybe I am searching wrong). Could someone please give some keywords which functionalities it has?
Is it only used with change requests?
I have the project types, phase types and already some projects in cProject that are waiting to be assigned.
Is there anything to configure (and a guide on what to configure)?
It would be really nice if someone could help me.
Thank you,
VanessaHi
Another way could be create an implementation project in Solman and use BPR for PLM. I found the next link in another forum, hope it can help you: https://websmp207.sap-ag.de/~sapidb/011000358700006935382005E.sim
Regards
Ivá -
How to Integrating DMS with EP
Hi,
Can I get some information about how to integrate DMS with EP.
If anybody has done this, please provide me some details regarding this.
Thanks in Advance.
Regards
LakshminarayananHi
You can use [Business package for DMS |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/e08533ae-8f6d-2910-ba9f-e9a6a363ec35] to integrate DMS with EP.
The Business Package for DMS Connector for KM offers portal users a central, role-specific entry point for evaluating and editing document-based structures and the documents assigned to them.
Hope this helps.
Regards
Prabhakar -
How to Integrating applications with full message control
Hi All,
I have a scenario where in I have to access three different Application databases and integrate them.
I have some Business validations to be performed on the Application Tables of the three.
I need some control of the message. This is Integration should choose a sender based on the data in a Tag
Questions:
1) Should I have to go for an integration process?
2) Can I retrieve data from a tag from the outbound interface? How to do that?
3) Can I call a synchronous Jdbc adapter from the process, get the response and based on that take a decision? Which step will help me to call an adapter?
Please help me with some of your suggestions and ways to proceed.
Regards,
MeherHi Meher,
>>>>Should I have to go for an integration process?
Yes
>>>>Can I retrieve data from a tag from the outbound interface?
Yes, of course
>>>>How to do that?
With a mapping
>>>>Can I call a synchronous Jdbc adapter from the process, get the response and based on that take a decision?
Yes
>>>>Which step will help me to call an adapter?
A send step
Regards,
Udo -
How to integrating APEX with the Oracle eBusiness suite release 11i
I need to integrate Apex with Oracle eBusiness Suite Release11. APEX need to use ERP authentication (user name/password) and oracle APEX pages will be called from oracle eBusiness Relese 11i menu.
I have followed metalink doc. 373604.1 and also looked into http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
I have setup DAD on Apache server, oracle Apps functions/menu and created apex_authorise function and added to my APEX application. I have followed the all the steps from above pdf file.
Here is my issues:
1. When I try to launch a APEX page again it asking me for the user name password
2. If I remove login page from APEX application then I can launch my APEX application but I cannot see any images
3. I need to pass oracle ERP 11i user and responsibility information to APEX. How should I do this?
Any help will be really appreciated
Thanks in advanceMany customers want this and would have hoped that Oracle would have included this as an option. Unfortunately, the left hand(Oracle Apps product managers) don't talk to the right hand(Apex product managers). They totally missed this great opportunity to make life much easier for Oracle Apps customers who have been waiting for this capability that Apex provides. At the present time this is somewhat a black hole. There are people who have figured it out but no one has provided the recipe for everyone else. It's very unfortunate and a complete oversight by Oracle in my opinion. They've got thousands of people developing code but no one had any foresight to see who would use Apex and how they would use it.
-
How to integrate cProjects with R/3 to get the Material Classification Data
Hi all,
We are installing the cProjects and we have to integrate it with R/3 to get the Material Classification data.
Is any one has developed the object link, which links cProject and Material Classification data in R/3?
Thanks in advance.
Regards.Hi Venkat,
Refer SAP cProjects Guide for Implementing an Object Link. This Guide also includes User Defined Object Links.
You should be able to find it on SAP Service Marketplace. In case you cannot, pl send me your email ID, I will mail the same to you.
Regards,
Reema.
Pl award points to all useful answers. -
How to integrating php with flex
hi
iam new to flex i want to check the username and password from database using php
and i have written that but iam getting this error
[RPC Fault faultString="HTTP request error" faultCode="Server.Error.Request" faultDetail="Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL: http://localhost/flex/login.php"]. URL: http://localhost/flex/login.php"]
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::faultHandler()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AbstractInvoker.as:216]
at mx.rpc::Responder/fault()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Respo nder.as:49]
at mx.rpc::AsyncRequest/fault()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\As yncRequest.as:103]
at DirectHTTPMessageResponder/errorHandler()[E:\dev\3.0.x\frameworks\projects\rpc\ src\mx\messaging\channels\DirectHTTPChannel.as:343]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()
can any one say wt that error iam attaching that code alsoLooking at the error, it seems like you are not able to access the php file on the server.
Could you please try accessing the php from your browser directly and let us know if you are able to access it.
Thanks,
Sudhir -
How to integration database with weblogic
hi:
the Experts,I am a beginner of Weblogic ,I have a interface is need get the data from the oracle database,who can tell me the detail stepsHi Selina,
Welcome to Oracle Forums.
As Oracle has very different products, each one has its own forum. This forum is related to Oracle Databases. As your problem seems to be on Weblogic side, probably you will get quick responses in the appropriate [Weblogic forum|http://forums.oracle.com/forums/forum.jspa?forumID=579] .
Miguel -
Error in Integration of Defect Module of HP QC with SolMan Ehp 1
Hi,
We are using QC version 10 patch 12 and connected with SolMan Ehp 1 for testing.
We are facing a problem in integrating the defect module of QC with Service desk of SolMan.
The required settings are done in SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> SAP Quality Center by HP -> Integration Defect Management.
SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Third Party Integration -> External Service Desk
We have also implemented the SAP note 1289155.
We are not using the Standard message type SLFN instead we have ZLFN.
See the bellow error message in QC during field maping.
The number of required defect fields in Quality center is different from the number of required support message fields in Application: u201Ceclsh112; WAS; 100u201D. Make sure the number of required fields is equal in both systems before you continue.
Can any one suggest on this.
Thanks in advance.
PraveenHi Praveen,
Try this it should solve the issue.
It seems that there is something wrong with your configuartion for the external service desk.
If possible could you remove the external service desk from in
Transaction ICTCONF and redefine it again?
Once you have done that please do the following steps:
- Go to the Solution Manager project
- Open the dialog to connect to a QC project
- Confirm the dialog.
This will update the assignment with all technical details.
You can check the results in the Site Admin. There navigate to the corresponding QC project and check the content of table BLUEPRINTS. There should be exactly 1 entry with the relevant information for the service desk integration (see attached "BLUEPRINTS(QC).doc").
Hope this helps.
Thanks,
Raghavendra. -
Integration of cproject with PS.
Dear all,
can anyone send me config document related integration of CPROJECT with PS.
its very urgent
fullpoints will be rewarded .
my email id : [email protected]
thanks
amit dharHello Sunil,
Kindly send it to me also, I have to initiate the cP & PS integration.
Thanks in advance,
my email id : [email protected]
with Regards
Rahul Sharma
Edited by: Rahul Sharma on Feb 22, 2008 6:03 AM -
How to install diagnostic agent for nw 7.0sp17, with solman ehp1- sp25
Hi Gurus,
we are using NW 7.0 Enterprise portal at SP17, want to configure E2E. So installed solution manager 7.0 EHP1 SPS 25.
Ran the Guided procedure solman_setup successfully. with intitial config, basic config and pending at managed system config.
Here my question is:
do i need to install smd agent on solman? or solman itself comes with agent. i cannot see any agent in mmc on solution manager.
What is SOLMANDIAG and SOLMAN AGENT, SMD Agent and Host agent.
The guide (https://websmp207.sap-ag.de/~sapidb/011000358700000952852009E) says before install SMD agent, install host agent, diagnostics agents are available 7.11 on wards, while installing smd agent sapinst asking SAP Unicode Kernel 711 , but currently my NW Portal system is using kernel 7.0..
Any guide, how to proceed for E2E on nw7.0 SP17 with solman ehp1 sp25( highest availale spack)
Thanks in advance.
Regards
BalajiHi Balaji,
As per the SMD agent 7.11 installation guide (https://service.sap.com/~sapidb/011000358700000952852009E) , Page 6 and 8, you would need to download the standard NW 7.11 DVDSs( usually kernel and Installation master) and SMD agent installation packages from the SMP. Location is mentioned in the guide as well.
For your query that Portal is based in i386, these are two different things. The SMD Agent will be installed with its own kernel and also 7.11 kernel is not support edon 32bit. However the SMD agent will use its own 7.11 64bit kernel and Portal will use its i386 kernel. Hopefully your hardware is able to support both. I recommend to proceed with x86_64 7.11 kernel for your SMD installation. Incase the hardwar does not support this, go for alower release of SMD Agent wherein the kernel supports 32 bit hardware.
Best Regards,
Srikishan -
How to launch integration builder with IE proxy?
Hi,gurus:
Our XI server is in remote side, so we have to set the IE proxy while launching integration server.But as you know,the integration builder woud not be launched successfully with IE proxy.So how can we deal with it?
Any help will be appreciated!Hi,
The error message is "unable to launch integration builder" ,which all of us might have ever met.
I think it is the cause of IE proxy,but we have to set the proxy to get the environment from remote XI server.
I have referenced note 800267,but it seems of no avail.
Any ideas? -
Integration of cfolders and cprojects with KM
Dear experts,
can anyone guide me and tell the process or cookbook material for cprojects.
My requirement is ..
1) what is cprojects and cfolders what are its benefits in organisation ?
2) How it can integrate with KM?
Thanks in advance and provide you valuable marks for gud answer.
Regards
RSHi RS,
1. cProjects has additional functionality over Project Systems in being web based (webdynpro) so can be accesses externally to the organisation (hence the "c" for collaboration projects). It follows a stage gate methodology and has better resource management functions that PS. cFolders is complimentary to cProjects for sharing project documentation, which is better than say using DMS in ERP.
2. cFolders can integrate to collaboration rooms on the Enterprise Portal and hence to KM. There is standard Portal content for this.
Hope this helps.
BR
Dave -
How to start Integration server with the user XISUPER
Hi,
How to start Integration server with the user XISUPER?
Regards,Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks, -
Integration of cproject with microsoft project 2003
dear all,
i want to integrate cproject with microsoft project 2003.
can u send me documents related this. what are settings required for this.
my email id: <b>[email protected]</b>
thanks
amitHi Amit,
Can you share DOCUMENT with me
my mail id [email protected]
thanks
sunil
Maybe you are looking for
-
Trouble with Photoshop Elements 8
Every time that I print a photo using Photoshop Elements 8, the photo show vertical lines and the colors are awful. I cannot print a photo using Photoshop Elements 8. I checked the printer and has no any problem. I print all my photos using Windows P
-
Software Update Server - Deleting old updates to make space for new ones
On Page 77 of the SystemImage_and_SW_Updatev10.4.pdf Apple recommends "deleting old updates to make space for new ones". I've looked and searched and yet to find a way to do this. The Server Admin interface and the command line options I've looked in
-
How to get the name of current monitor?
I have a script which is used to get some application data. The script take parameters such as "LOB" so it can query data for different department. When it found something, it raise an event in event log. Therefore this script is used by several diff
-
Podcast episodes won't download in iTunes app (but works fine on desktop)
Hi, I can't figure this out: Our podcast episodes simply won't download in the iTunes app on iPhone. The download simply stops at 10.3 kB (or sometimes at another value), without really getting started at all. This is very odd, since downloads are wo
-
Which wireless mouse is compatible with my 2007 MacBook?
Which wireless mouse is compatible with my 2007 MacBook?