How to inventory packing material on Handling Units frm Inbound Del @ PO?

I am receiving raw material against a PO via VL31N, where I pack into handling units. When I post GR for this inbound delivery, the Raw Material is getting a 101 but the packaging material is not being considered. Is there a way I can get the packaging material into inventory? I did verify the following settings as suggested in a different post here and yet the Packing materials are not considered. Any help is appreciated.
1. there is a plant in your HU (you can control this in your packing material type in transaction VHAR; set plant determination either to A or B).
2. there is an item category in your HU (you can control this in transaction 0184; create the following entry: EL / VERP / PACK / / ELP. If you now create an inbound delivery type EL and your packing material has item category group VERP the system will assign item category ELP to your HU.
If both requirements are met the system will generate an item in your inbound delivery after packing.
Then make sure that the item category of the HU (ELP for example) has movement type 501 assigned to it in transaction 0VLP.
If you then post the GR for your inbound delivery, the packing material will be posted on stock.

Hello,
It is well described in:
[Note 831204 - Delivery items for packaging materials|https://service.sap.com/sap/support/notes/831204]
pay atention on this prerequisit
For the relevant delivery types the 'ItemRequirement' routines
  have to allow items which does not refer to a sales order.
  Standard routine 202.
  [Customizing path: Logistics Execution --> Shipping --> Deliveries
   -->  Define Delivery Types]
Andrzej

Similar Messages

  • Is there any BAPI or FM to pack Materials into Handling unit in INB Deliver

    HI,
      I would appreciate if any one can throw some light or  FM or BAPI with some sample data to pack material into handling units in a inbound delivery (VL32n).
    Regards
    PRasad

    Try BAPI_HU_CREATE
    SD_DELIVERY_UPDATE_PACKING
    HU_PACKING_DELIVERY
    HU_PACKING_AND_UNPACKING
    HU_PACKING_UPDATE

  • How to get hierarchy of a handling unit in delivery

    Hi All,
    We have a requirement of displaying in the form output highest level handling unit details(measurements length width and all).
    After that we want to display lower level handling units materials that has been packed.In the transaction Vl03n I can find this by just double clicking the parent Handling unit.
    To make simple how to get the hierarchy of handling units?
    If I know handling unit(say HU1) how to find there are some handling units(may be HU2,HU3) included in this handling unit HU1.
    I refered to the tables VEKP and VEPO it does not help me in this regard.Please suggest some body some idea on this.
    Regards
    Mahesh

    Hi,
    Have you look into field VEKP-UEVEL (Higher-Level Handling Unit)
    RF_SW_VEKP_READ                  Select from table VEKP - 1st layer
    VEKP_READ                        Select from table VEKP - 2nd layer
    Kind Regards
    Edited by: Raymond Friston on Apr 24, 2008 8:37 AM

  • Physical inventory with and without handling unit managment

    Hello all,
    I would like to know what is the difference between physical inventory with and without handling unit management.
    Pl. advise.
    Thanks,
    Maxx

    Assuming you are referring to WM inventory, it is very similar.  Inventory is conducted at the SU level in WM if you are HU managed.  One of the most widely known issues is the lack of ability to post differences of nested HUs at the WM level.  If you are not using nested HUs, the process is the same as storage unit management without handling unit management.

  • Putaway of Handling units via Inbound delviery

    Hi,
    I have configured HUM for my warehouse & am putting away my handling units via Inbound delivery.
    The system currently generates a transfer order for each & every HU/ storage unit that is created.
    But i would like to create one single transfer order for every storage type. In other words one transfer order will contain all the storage units that are to be put-away per storage type.
    Is there a setting to make the above mentioned possible. Do let me know if more clarity on my question is reqd.
    Thanks
    Kiran

    Hello,
    You could check the To split functionality to see if this can help you complete your requirements.
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/c6/f83df24afa11d182b90000e829fbfe/frameset.htm
    Further documentation is available if you click the IMG documentation in LE>WM>strategies--> Define stock sequence for stock removal (picking)
    Hope this helps
    Thanks,
    Edited by: Abhijit Sadhu on Jun 8, 2009 4:14 PM

  • Determine costs for packing when using handling units

    Hi Experts,
    How can I track the costs for packing process and packing material when I am using Handling Units to represent the packing ?
    Is there any idea?
    The only way I see for tracking the costs is to create a packing operation when creating the FP (and do not use HU).
    Thanks,
    Artashes

    Thanks for the answer Mario, but let me ask more precise question.
    I have a finished product AAA which is not packed. Now I have a requirement to pack it.
    So before hearing about HU, I would add a new operation step to AAA recipe, new resource and a packing material to AAA's BOM.
    For this option I don't have questions.
    But now I want to use HU. so I create packaging instructions, and do the transactions
    - COWBPACK - Work Order - Finished Product  - to pack materials in process order
    - COWBHUWE - Goods Receipt for Work Order  - to do a GR for process order.
    And where can I consider the labour and packing material expenses here? I even don't have a resource which is doing a packing. so I can't do scheduling...maybe I don't understand the usage of HU?
    Thanks and Regards,
    Artashes

  • How to change stock category of handling units at mass level without Development

    Hi,
         We have hundreds of handling units with stock category "blank" in our returned stock storage location which is HU managed. MMBE shows different
         value in Return stock  what  we see in HUMO is  only One HU with very less qty. visible with stock category "R".inventory stock is different than the    
          HU  stock visible in HUMO
         can some one help in explaining how can we change the stock category of HU's from Blank to R. is there any standard process offered by Sap.
         Development of program to get it done is out of scope right now
         Thanks,

    i am struggling to figure this out too.right now we if i look into MMBE i see the returned stock
    value.but HUMO does not show any handling units with stock category R when searched
    though Storage location is HU managed.i suspect user has done GR without delivery which cause the dependency.
    Thanks for quick response.

  • Packing setup with handling Unit Management

    Dear Experts,
    I would like to know in the ERP if you have any steps guide to configure
    two step picking, packing and Handling Unit management.
    You help is very appreicated.
    Thanking you

    Hi,
    I would recommend to check the help.sap.com documents first for an overview.
    Regards,
    Ely

  • Sharing Handling Units between Inbound and Outbound Delveries?

    Hello-
    I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
    1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
    2.) Purchase Order is sent to supplier.
    3.) Shipping Label is generated in SAP and is assigned a Handling Unit.  Label is sent to supplier.
    4.) Supplier affixes this label to product and ships it to our warehouse.
    5.) Goods Receipt is performed via Purchase Order (MIGO). 
    6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
    We would like to do a few new things with this process.
    A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it. 
    B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer. 
    Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery? 
    Is EWM Cross Docking the best way to accomplish this? 
    Are there other proven approaches?
    Thanks for your time and help.
    -Ron

    hi friend
    Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the  material
    like FG  material and tray
    identification number controlling the handling unit numbers.
    with regards
    dinesh

  • Handling Units in Inbound deliveries

    Dear All,
    Could you please let me know what is the complete SAP process for HUM in Goods reciept with and without WM. We are recieving the  Boxes containing various combinations of configurable material from the Supplier and the same are being delivered to the Customer sites. Kindly let us know the Standard SAP solution to tackle this.
    Thanks a ton,
    Regards,
    KS

    Hello KS,
    The inbound process with Handling unit is as follow:
    - Purchase order is created with Shipping Notification
    - The vendor notifies the goods recipient of the delivery of the goods by using a shipping notification that also contains the packaging data.
    - The shipping notification generates an inbound delivery that includes the packing information from the shipping notification. (Incase NO EDI notification, the inbound delivery must be created and packed manually for the purchase order.)
    - The handling units are put away and the inbound delivery is posted for goods receipt.
    Hope this helps.
    Regards

  • Re-using Handling unit. Inbound deliver has unpacked materials

    Dear All
    We're running the process that inbound delivery is created automatically once goods issue for outbound delivery is done.
    We're also running the process when handling units created in outbound delivery are re-used in Inbound delivery.
    The problem we've got is that from time to time we have situation when part of materials in inbound Delivery are unpacked, while these materials were packed in handling units. There are no errors appear, and Inbound Delivery is created, but materials are unpacked.
    In humo for such handling units, which are not created in Inbound Delivery i can see that the status was not updated and still remains "LOAD PHEX WHSE" and such HUs are assigned to plant where goods issue was done.
    Whille for handling units which were created in Inbound Delivery the status is updated to "PHEX" and HUs are assigned to recieving plant.
    Please advise if you have any idea on the root cause and solution.
    Thanks in advance.
    Best Regards
    Andrey

    HI Andrey,
    Wanted to know if you have recd the solution for this old thread. We arefacing a similar kind of problem wherein we get the status as 0020 when we pack for Returns Delivery. This status is like the Goods are already posted and hence we cant do PGR.
    Please suggest.
    rgds..Ameet

  • Handling unit in inbound delivery

    Dear all
    creation of handling uinit for inbound delivry are optional in standard as we can create H.U or without H.U for inbound delivery
    please guide me how can i customize sysytem as creation of handling uinit for inbound will be mandatory in other words we can't create inbound delivery without handling unit number.
    best regards
    R.T

    no comment

  • Function Module for UNPACKING Handling Unit from Inbound Delivery

    Hello Experts,
    I am working on a RFID program to Receive goods from vendor...
    One of the steps of the program should CHANGE the quantity inside a received batch.
    To do so, I need to UNPACK the Handling Unit first... then change the quantity.
    I am using the following Function Modules to do so:
    - 'HU_GET_HUS'
    - 'V51P_FILL_GT'
    - 'HU_PACKING_AND_UNPACKING'
    - 'HU_POST'
    First 2 FM works fine...
    But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
    Have anyone done this before??
    Here's the code I've done to do some testing before putting it into my code...
    PLEEEEEEEEEEEASE HELP.
    TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
    DATA: wa_object LIKE hum_object,
          it_object TYPE TABLE OF hum_object.
    DATA: wa_v51vp LIKE v51vp,
          it_v51vp TYPE TABLE OF v51vp.
    DATA: flag LIKE v51p_select_flags.
    DATA: it_venum            TYPE STANDARD TABLE OF hum_venum,
          ef_rcode            LIKE sy-subrc,
          et_vekp             TYPE STANDARD TABLE OF vsep_s_vekp,
          et_vepo             TYPE STANDARD TABLE OF vsep_s_vepo,
          et_vevw             TYPE vsep_t_vevw,
          et_highest_level    TYPE vsep_t_venum,
          et_messages         TYPE huitem_messages_t,
          is_packing_request  TYPE vsep_s_pithu,
          es_p_request        TYPE vsep_s_pithu,
          es_item             LIKE vepovb,
          cs_header           LIKE vekpvb,
          ef_number           TYPE vpobjkey,
          et_header           TYPE STANDARD TABLE OF vekpvb,
          et_items            TYPE STANDARD TABLE OF vepovb,
          et_item_serialno    TYPE vsep_t_rserob,
          et_history          TYPE hum_history_t,
          et_highest_levels   TYPE hum_venum_t.
    DATA: wa_venum            LIKE hum_venum,
          wa_vepo             TYPE vsep_s_vepo,
          wa_vekp             TYPE vsep_s_vekp,
          wa_items            TYPE vepovb,
          wa_header           TYPE vekpvb.
    START-OF-SELECTION.
      wa_venum-venum = p_venum.
      APPEND wa_venum TO it_venum.
      CALL FUNCTION 'HU_GET_HUS'
        EXPORTING
          it_venum          = it_venum
        IMPORTING
          et_header         = et_header
          et_items          = et_items
          et_item_serialno  = et_item_serialno
          et_history        = et_history
          et_highest_levels = et_highest_levels
          et_messages       = et_messages
        EXCEPTIONS
          hus_locked        = 1
          no_hu_found       = 2
          fatal_error       = 3
          OTHERS            = 4.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE et_header INDEX 1 INTO wa_header.
      CALL FUNCTION 'V51P_FILL_GT'
        EXPORTING
          it_venum         = it_venum
        IMPORTING
          ef_rcode         = ef_rcode
          et_vekp          = et_vekp
          et_vepo          = et_vepo
          et_vevw          = et_vevw
          et_highest_level = et_highest_level
          et_messages      = et_messages
        EXCEPTIONS
          hu_locked        = 1
          no_hu_found      = 2
          fatal_error      = 3
          OTHERS           = 4.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE et_vepo INDEX 1 INTO wa_vepo.
      READ TABLE et_vekp INDEX 1 INTO wa_vekp.
      MOVE-CORRESPONDING wa_vepo TO  is_packing_request.
      is_packing_request-belnr    = wa_vepo-vbeln.
      is_packing_request-quantity = wa_vepo-vemng.
      is_packing_request-veanz    = '-1'.
      is_packing_request-meins    = wa_vepo-vemeh.
      is_packing_request-exidv    = wa_vekp-exidv.
      CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
        EXPORTING
          is_packing_request = is_packing_request
        IMPORTING
          ef_rcode           = ef_rcode
          es_p_request       = es_p_request
          es_item            = es_item
        CHANGING
          cs_header          = cs_header
        EXCEPTIONS
          missing_data       = 1
          hu_not_changeable  = 2
          not_possible       = 3
          customizing        = 4
          weight             = 5
          volume             = 6
          serial_nr          = 7
          fatal_error        = 8
          OTHERS             = 9.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'HU_POST'
        EXPORTING
          if_synchron = 'X'
          if_commit   = 'X'
        IMPORTING
          ef_number   = ef_number.
      break nunfx004.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Thanks in advance,
    Fernanda

    Hi ,
    Check this code.
    Pack componet HU to Overpack HU. *
        l_packing_req-venum = g_ovrp_venum.                  "Overpack Internal HU
        l_packing_req-exidv = g_ovrp_exidv.                  "Overpack External HU
        l_packing_req-veanz = '1'.                     "PACK Constant
        l_packing_req-sub_hu_venum = l_int_venum.
        l_packing_req-sub_hu_exidv = l_int_exidv.       "Componet External HU
        l_packing_req-velin = '3'.                      "HU Type Constant
        l_packing_req-quantity = '1.000'.
    call function 'HU_PACKING_AND_UNPACKING'
          exporting
            is_packing_request = l_packing_req
          exceptions
            missing_data       = 1
            hu_not_changeable  = 2
            not_possible       = 3
            customizing        = 4
            weight             = 5
            volume             = 6
            serial_nr          = 7
            fatal_error        = 8
            others             = 9.
        if sy-subrc <> 0.
    error
          clear: v_msgv1, v_msgv2, v_msgv3.
          v_msgv1 = text-031.
       PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
          leave to screen sy-dynnr.
        endif.
    No Errors --> POST HU
        call function 'HU_POST'
          exporting
            if_synchron = 'X'
            if_commit   = 'X'.
    plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
    Regards
    Mohinder Singh Chauhan

  • Assigning Handling Unit to Inbound delivery

    Hi Guys,
    My requirement is i need develop program which will t program which will take the  mutliple Purchase orders/STOs and create a single inbound delivery.   Acutally this will be done SAP transaction VL31N.  But as it has sap enjoy transaction we can run write a bdc for this transaction.   So I found one transaction VL34, which is taking the multiple POS, but..creating  multiple deliveris i.e. a inbound delivery for each PO.  So I copied this code in Z program and did the modifications to create a single inbound w.r.t. given purchase order numbers.  But I found packing details are not getting updated. 
    So, now i need to assign the packing details (HU numbers) to created inbound delivery . 
    Any idea on this ?
    Best Regards,
    Ganesh Nama

    Any body knows...solution for above question ?

  • Packaging Material and Handling Unit Issue

    Dear All,
    Context:       VL02N Outbound delivery (& packing)
    I have 2 packaging material 1.box 2.carton
    Finish product  a,b,c,d  etc
    I want to put multiple finish product in a box then I want to put 3box in a carton.
    I have VERP Packaging maerial 
    0001  Packaging material group         (linked to finish product and packing product in General/Salesview)
    0001 & 0002 packaing material type -box and carton (linked to two packaing material box and carton respectively in General/Salesview)
    in HU02 T.Code I have attached finish products into a box and a HU got generated.  ( Is there any movement happens???what happens when a HU get generated?)
    Next I want to put 3box in a carton . How is it possible?
    Thanks in advance
    Shuva

    In HU02 (or HUMO) give all three HU numbers (for the boxes) in tab 'Pack HUs' and press enter. Bottom half of the screen shows all HUs that may be packed. Select all and press 'New HU per x HUs'. You will be prompted to enter the packaging material for new HUs while displaying packaging material for the existing HUs. Select as appropriate, enter number of existing HUs to be packed onto this new HU (3 in your case) and enter.
    Hope this helps.
    Rajiv..

Maybe you are looking for