How to inverse the Circle transition

I'm trying to create the effect of someone's eyelids closing slowly from the person's point of view. I see that the Circle transition potentially does what I want, except that I need the effect inversed (the black is on the outside of the circle instead of the inside).
Any ideas would be appreciated. Thanks!

Similar Messages

How to check the Conditional transition while submit the jsp as screenflo

Hi All,
I want to know that how to check the conditional transition, which result is used to decide the next Activity while submit the JSP as Screen Flows
Edited by bpmvasu at 03/27/2007 11:14 PM

Hi,
Unlike BPM Object Presentations where the 'selectedButton' is automatically assigned to the predefined screenflow 'result' variable, when using JSP Persentations you need to do the mapping yourself (I don't think there is a way around this).
Assuming you're using a JSP Presentation with a Fuego Object Interactive Call, click the 'Advanced' button at the bottom of the Main Task dialog.
Select the 'showOut' argument set, add a new argument mapping. Select 'result' from the Screenflow's instance variables and map it to 'parameters["paramName"]'. Where paramName is the name of the HTML submit input element in your JSP.
Hope this helps,
Tim

How to draw the circle diagram of induction motor using labview

hi
i am trying to model the electrical machines using labview..
i want to know that is it possible to draw the circle diagram of induction motor using labview..........
if its possible then please suggest me the possible ways.
thanks

There may be better ways, but the method I used was to convert amplitude & angle to rectangular coords, then create an XY plot from (0,0) to those coords. (Or 1 plot for Voltage, 1 for Current, etc.) I would then just keep updating this plot and feeding it to the graph in a loop. The result was a slightly choppy looking but useable animation of the phase vectors.
-Kevin P.

My iPad is frozen with a white rotating circle in the center. How do make the circle stop rotating?

My iPad is frozen with a white rotating circle in the center. How do I unfreeze it?

OK if I understand whats going on.
You have to restore your ipad.
If you backed it up prior to this problem you may not loose everything.
I can tell you how to restore it.
Hold the on/off button and the home button at the same time until the device turns off.
Once the device has turned off without letting go of the home button release the power button and keep holding until the connect to itunes logo appears.
It should be rather obvious now that you have to connect your iPad to the computer.
iTunes on your computer should open automatically if it doesn't open it.
on the side bar of iTunes your ipad should appear.
Click on it.
Then in the centre of the window there should be a restore and/or restore and update button.
Click restore.
the rest of the instructions should appear on the screen.
Assuming the restore was successful.
Leave the iPad plugged in and If you backed up the iPad before it stopped working then you should see a restore from back up there if not you may have to start from scratch.

How to view the video transition ?

Hi there,
I am new to Final Cut Express. I just bought it bcos the store has opening 10% discount offer.
I went to effects > transition tab & saw there are a list of video transition. I can only see how the transition looks like after I drag it into the video timeline & placed it between 2 still photos.
But how to I skim thru & see how each one looks like before I choose it ? When I click any of the transition, both the preview screens do not show the transition !!
Any ideas ?
Thanks

I personally print a manual.
You should be able to print just the pages you require without printing the entire 1150 odd pages.
In Help>Final cut Express User Manual, open it up and go to Index, Click T and find Transition in the list.
There will be a load of sub-entries, click the page number of a likely sub-entry and the PDF opens to that exact page. I find this quicker than looking in a book, although like you a real pain to study. Give me a real book any day.
Chapter 35 pages 520 through 524 explains what transitions do in the PDF manual I use.
Al

How to inverse the effect of shape mask for color correction ?

To change the effect on a particular portion of the frame we use shape mask is there a way to keep the portion under the mask intact and change the color outside it ? For eg specially if the area to keep unchanged is in the middle of the frame.....?

At the bottom of the color board you have separate controls for inside and outside.

How do I apply a transition to a group of clips?

Hi,
I want to apply a transition to a group of clips. I know how to select a group of clips, but I have not found how to apply the same transition on all of them. Can this be done in FCE?

let:s say I want to apply the default transition to the group, how do I do it?
Place the playhead at the start point in the Timeline.
Select a group of clips that are contiguous.
Drag them to the Canvas Overlay, Overwrite with Transition.
Note: Media Handles must be available or you will get a warning message.
And do I understand wright that I could also do it with a unique transition that I would place it in my >Favorites Bin? How would I do that?
A Favorite works differently. There's no way to alter the Default transition in FCE. The Default is always a one second dissolve.
To make a Favorite you can open an existing transition in the Timeline by double clicking it or just open a transition into the Viewer directly from the Browser. Existing is best as you can setup to see any changes in the Canvas.
It opens in the Viewer with the controls showing.
Placing the Playhead over the transition in the Timeline will give you immediate feedback of the changes in the Canvas.
Make any adjustments like timing, angle, color etc.
Look for a small hand icon at the top right of the Viewer.
Click and drag this to the Favorites Bin.
You will now see the new transition available for use with any new values.
This Favorite can now be used as a transition in the usual way.
There is no way to add the Favorite to more than one clip at a time.
Al

How to Transform a Circle?

This is probably a simple question for most of you, but I'm trying to make a circle split into 3 equal parts, and then make the parts come back together. My main issue is figuring out how to split the circle into 3 parts (its just a normal outline circle made by stroke). How would I come about doing this?
Thanks.
- Emanuel

This basic training and can be solved in several ways. In case you haven't solved your issue you may download a small, illustrative project file from ftp.progresit.com ( in your url)
User: visitor1
pw: santacruz1
look for and DL "circle.aep" -- (AE-CS6)

Applying the same transition between multiple clips

Does any know how to apply the same transition to multiple clips that are all ready in the timeline? I remember attending an Adobe Premiere Workshop years ago and I'm sure they demonstrated that technique. It's would be such a time saver. Perhaps it was a Final Cut Workshop.

Don't you get something like this:
That works perfectly for me. Have you updated to CS4 4.1?

How to make a circle and a line ending (at the centre of the circle) lock and move together?

I'm new to Illustrator and perhaps it's not the best software of CS6 Master for doing this, but:
I have a few (13) circles, they are connected with lines (one line from the centre of a circle to the centre of the next one, so 13 connecting lines). I need to move the circles around in order to create the appearance that suits me best, but I want the connecting ending to move together (see picture below). I need to do this often and get an immediate visual feedback. How do I do it? Am I using the wrong software altogether?
Thanks in advance to all who will try and help out!

Here's a way of doing it with the Appearance panel and multiple fills converted to an ellipse.
1 You create your path with all the segmentts you require can be an open or closed path.
2. Convert the fill only to an Ellipse. Effect>Convert to Shape>Ellipse (use the Absolute option and give it the dimension you want the circle to be) (cn cahnge this at anytime in the future as well as the color of the circles)
3. Using the Effect>Distort and Transform>Transform move the circle fill to a position corresponding to an anchor of the path as to position the circle with the nchor as the center.
4. In the Appearance panel Option (Alt) drag the fill with the convert to ellipse and the transform down or up to duplicate it, or se the flyout of the Appearance panel to duplicte the fill.
(do this for each circle you need) You will only have to adjust the transformation vertical and horizontal positions, Bith effects will be duplicated when you copy the fill so you only adjust the transformeffecct that is already associated with the fill.
Like this:

How can I get an image or clip in front of the first transition with auto transition on?

I have been trying to set up a project using auto transitions. I cannot get a clip to start before the first transition. The problem is when I post the project to Smugmug or FaceBook the preview box that appears is black. I want it to show the first frame of the clip to give an indication of the content of the clip. The only option seems to be to turn off automatic transitions and manually put them it at each break.
Any ideas?

What program was the artwork created in and what version of Illustrator are you using? ALWAYS provide this information first so we know what features you have available.
If everything is native Illustrator artwork, then you can probably copy the portion of the paw you want outside the circle and use a PathFinder command to merge that shape with the circle, then put the resultant shape behind the artwork.

How to create a circle with the origin not at (0,0)

I want to create a circle but the origin is not at (0,0).
I have the following data;
- point coordinate (X1,Y1)
- radius of the circle
Also, I want to create a line between the origin and the point (X1,Y1).
Kindly show me how can I do this. Thank you very much.

The accuracy of the GPS Receiver is +/- 0.5 meter. Its a Novatel product (Flex Pak). I am getting the string data from the GPS receiver. I took the Longtitude data as for my X and Latitude data for my Y. I took the Longtitude and Latitude data from the center of post for my reference calculation only to get the true value of X and Y at the end of the boom. I call the X and Y value at the end of the boom as dynamic because it always give me the value wherever the boom goes. Please see the attached sample VI's.
At one point , I actually measured, using a tape measure, the distance from the end of the boom to the center of post and i am getting the correct radius. But when I rotate the boom on the other side it will give me a different radius. And looking at this radius value, while rotating the boom, I can judge that my point of origin is not (0,0).
At this point I have no idea how to get the correct origin. Kindly teach me if you have idea on this.
Do you think the way I calculated for the true value of X and Y is still correct? Is my reference too far?
Thank you very much.
Attachments:
plotting xy graph 1.vi ‏22 KB
dynamic xy calculation.vi ‏28 KB
dynamic radius calculation 1.vi ‏15 KB

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
== This happened ==
Every time Firefox opened
== Several weeks ago.

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the ''updates'' and ''updates\0'' folder:
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

How do I remove the lock(with the circle around it) from the top of my iPhone? The screen won't display sideways.

How do I remove the lock (with the circle around it) on my Iphone? The screen won't change to the side view. I have no idea what button I accidently
pushed.... Please advise! Thanks, Amy

Double click the home button, swipe the dock at the bottom of the screen to the right, tap the circle/lock so it becomes just a circular arrow.

PS CS6 on the mac pro: the bruch in hard and soft is the circle of the bruch bigger than then the effect. How can i bring it to normale? /Users/jorisneyt/Desktop/Schermafbeelding 2014-11-07 om 10.04.59.png

PS CS6 on the mac pro: the bruch in hard and soft is the circle of the bruch bigger than then the effect. How can i bring it to normale?

Go to System Preferences>Accessibility>Display and the set the Cursor Size to Normal

How to inverse the Circle transition

Similar Messages

Maybe you are looking for