How to inverse the effect of shape mask for color correction ?

To change the effect on a particular portion of the frame we use shape mask is there a way to keep the portion under the mask intact and change the color outside it ? For eg specially if the area to keep unchanged is in the middle of the frame.....?

At the bottom of the color board you have separate controls for inside and outside.

Similar Messages

What's the best decklink usage apply for color correction

Hi Guys,
recently i jsut noticed that matrox supplied a very good color corrcetion for Adobe, im using blackmagic hd extreme 2 now, seems it doenst grade color very well compare with matrox, i wonder, any decklink u guys using that grade color very well? Im newbie in color no matter in FCP nor COLOR. Thanks for help guys

What is this footage that you are trying to color? The hardware used really doesn't matter in this case, all they are doing it outputting a signal to your monitor. How that footage looks and how far you can push it isn't dependant on the cards...it is dependent on the footage you have to work with.
I know your English might be poor, so I hope you don't get lost.
Read this first: http://en.wikipedia.org/wiki/Chroma_subsampling
Now, if you have 4:4:4 footage, you can push it very far. Film, HDCAM SR, Viper...all sorts of high end HD can have this sampling. However, a more common high end format is 4:2:2, like DVCPRO HD, HDCAM SR, D5. If you shot HDV...HD on those miniDV tapes, then your chroma sampling is 4:2:0. You are missing information COMPLETELY. So HDV cannot be pushed very far when color correcting. DV is 4:1:1, so it too cannot be pushed very far. If you shot on those formats, there is only so much you can do.
Shane

How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

How to preview the effect of Plugin in the original image,when the modal dialog is open?

Hi,
I am writing a plugin to Photoshop CS2, as some plugins, I want to add a “Preview” option for my model dialog. So I want to see the effect of my Plugin in the original image when my model dialog is open.
Any one know how to do that? How to see the effect in the original image, when the dialog is open?
Thank you!

As explained multiple times in your SDK - you cannot do that.

How to find the number of references created for a given object ??

How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
   class MyClass
       public static int counter = 0;
       public MyClass( ) { counter++; }
    // Then later in your program, you can do this:
    MyClass a = new MyClass();
    MyClass b = new MyClass();
    System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl03612

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How to download the paralles desktop 3.0 for mac, how to download the paralles desktop 3.0 for mac

how to download the parallels desktop 3.0 for mac

Hello,
http://kb.parallels.com/en/5802
http://www.amazon.com/Parallels-Desktop-3-0-Mac-Version/dp/B000GHIV2Q

How to find the count of tables going for fts(full table scan in oracle 10g

HI
how to find the count of tables going for fts(full table scan) in oracle 10g
regards

Hi,
Why do you want to 'find' those tables?
Do you want to 'avoid FTS' on those tables?
You provide little information here. (Perhaps you just migrated from 9i and having problems with certain queries now?)
FTS is sometimes the fastest way to retrieve data, and sometimes an index scan is.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9422487749968
There's no 'FTS view' available, if you want to know what happens on your DB you need, like Anand already said, to trace sessions that 'worry you'.

Without to change the setting.how to set the decimal place to 7 for an UDF.

Without to change the setting, how to set the decimal place to 7 for an UDF?

Hi
Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
So i think you can not set the decimal places without changing the setting in display parameters.
i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
Hope it helps you
Regards
Vishnu

How to decide the no.of models required for our application implemention

Hi ,
i ahve one basic quetion in WD development.
how to decide the no.of models (aRFC ,EJB..etc ) required or needed to get the functionality of our application ?
for Ex:
my application consisits of belwo functionalities.
1. serach for the country
2.display the bank lis for the above country
3.display the bank details of the selected bank in the step no.2
any one of you explain me how to decide the no.of models required for avoe functionalities .
or is it in a single model we can include the all the above functionalities ?
Regards,
Govindu

Hi
It all depends on application to application and requirements better to consult with functional guys or team lead what exectly they want to implement .All could be possible with RFC or EJB , some alternatives are
1. serach for the country : For this standard java API is there which populate all country (no need any rfc or ejb)
2.display the bank lis for the above country : (Check if there any webservices for this or create manually value help for this , even if u will use the RFC abaper guys will do the same )
3.display the bank details of the selected bank in the step no : step 2 will solve this also with one additional field i.e address and details.
I hope you agree with the point that stand alone WD app can do these all thing without any model.
Best Regards
Satish Kumar

How to run the setup tables in CRM for 0CRM_LEAD_I datasource.

Hi all,
How to run the setup tables in CRM for 0CRM_LEAD_I datasource.
what is the tcode and steps to follow.
Thankyou.

you dont have to do set up tables for 0CRM_LEAD_I.
run the init infopack in BW and then subsequent delta's

How to inverse the effect of shape mask for color correction ?

Similar Messages

Maybe you are looking for