How to invoke a custom Workflow in standard PCR

Dear gurus,
I would like to invoke a custom Workflow from the standard PCR for Transfers. Do you have any idea how I can achieve this.
Thanks!
Vivek.

Hi,
In QISRSCENARIO transaction, Open your ISR scenario. SAP has delivered SPPS for internal transfers. Open SPPS. At the end of the screen click on "Additional Data for Scenario".
Here the WF is defined.
Change it to what u want. You will need to adopt ur new WF to std delivered one.
For more information please have a look at
<a href="https://websmp206.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1049057&_NLANG=E">sap note no 1049057</a>
Cheers!!
Ashutosh

Similar Messages

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

How to add a custom code to standard sap menu

Hello guru,
will you please explain me how to add a custom code to standard sap menu?
thanks in advance.
Best regards.
juan

Hello juan,
with SE43N you can add custom transaction codes to the existing menues.
see http://help.sap.com//saphelp_erp2004/helpdata//EN/00/783b377bfdcf61e10000009b38f936/frameset.htm
regards
johannes

How to integrate the custom workflow in UWL?

Hi Gurus,
How to get he custom workflow task or alerts into my UWL page or iview?
Please if you have step by step approach of the same kidnly share with me
Thanks in Advance,
Dharani

Dharani,
Try this Document,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
Ram

How to invoke ADF custom application from existing R12 EBS application

Hi Guru's,
We have a requirement to invoke ADF custom application from existing EBS R12.1.3 application.
Is there any documentation provided by ORACLE or any online help on how to integrate/invoke ADF pages from existing EBS application?
And can we pass any EBS session level parameters like(user info, language, operating unit etc) to ADF layer while invoking the ADF application?
I have thoroughly searched the forums and got some info related to JAAS security links and all. but i am looking for exact integration specific steps.
Any help in this regard is a great help!!
Thanks alot for your help!!
Subba.

lets raise your question over here
JDeveloper and ADF
Thanks
vamshi.

How to link a custom BADI with standard report.

Hi All,
I have a requirement to create a Custom BADI and to link it through the Standard Program. How to do this. As i cannot modify Standard Program.
I have put some checks in custom BADI, which i want to be done before anyone runs standard program. I have a doubt of how to do this in between (before executing Standard Program) as i cannot use my Custom BADI in Standard Program. Then how to trigger the BADI and where. Is there any way to accomplish the same ?
Thanks in advance.
Regards,
Neha

Hi Neha,
I am stuck to the same problem. if you have got the answer please share it.
Nilesh

How to invoke a custom adapter from a BPEL process

Hi guys,
I've implemented a custom outbound adapter and deployed successfully on Weblogic V.10.3.4.
My current installation also consists of Oracle SOA Suite 11g / JDeveloper 11g (11.1.1.4.0)
In the Weblogic administrator's console,
*1.* I navigated to:
Summary of Deployments -> AdapterName -> Configuration -> Outbound Connection Pools
*2.* Selected: javax.resource.cci.ConnectionFactory and added new JNDI name for Outbound Connection Instance: "*eis/HelloWorld*"
My task is to invoke the custom adapter from a BPEL process.
I altered the customAdapter-config.xml so as to be able to use custom adapter wizard from JDeveloper's "Service Adapters" palette,
and fullfilled the custom adapter wizard's fields accordingly. The 3rd step of the wizard requires Connection Information.
I added: "*eis/HelloWorld*" in the "*Connection Factory Location*" field.
Deployed BPEL process successfully, but testing failed due to binding.jca-12510 error:
"The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/HelloWorld'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/HelloWorld. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server "I tried to apply (just for testing) "eis/FileAdapter" in the "Connection Factory Location" field of the custom adapter wizard,
and BPEL successfully invoked the adapter.
Any ideas ?
Thanks,
George

George, What deployment do you have this associated with?
- D.J.

How to add a custom segment in standard IDoc?

Hi,
I want to add a custom segment in stanard IDoc type (eg. MATMAS). I don't want to go for extended idoc (copying stanard idoc into zidoc and adding custom segment).
Please tell me.

Hello
Transaction BD10 uses fm MASTERIDOC_CREATE_REQ_MATMAS which in turn uses MASTERIDOC_CREATE_MATMAS to create and distribute material master IDocs.
Fm MASTERIDOC_CREATE_MATMAS belongs to function group MV01 in package MGV. Here you will find the user-exit function group XMGV.
Perhaps EXIT_SAPLMV01_002 might be useful for you.
Regards
Uwe

How to register custom workflow in oracle apps ?

Hello
I am new to workflow. I have customized an oracle standard workflow and now i want to register this custom one. Please help how to register the custom workflow. What steps need to achieve this.
Thanks

Hi,
You may or may not need to "register" the workflow - it depends on the changes that you made and which Item Type you modified. Some applications are essentially hard-coded to use a specific item type and process, some hard-coded to use an item type but you can configure the process to use, and some allow you to specify which item type and which process to use.
Without knowing exactly what you have done, though, there is no specific advice that anyone can give you here on what you need to do, apart from to ensure that you have saved the new definition to the database.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Launch Custom Workflow thru Business Event

Hi ,
My requirement is to launch a Workflow Approval process after creating a Transaction Record in Oracle Apps.
(1) Is it a good practice to invoke the custom workflow (from PLSQL) from a database trigger on the TRX table?
(2) Instead, can I define an event or use a pre-defined business event to invoke my customer WF?
(3) If so, is it sufficient while defining "Event Subscription", just set action type "Launch Workflow" and set workflow details? or do I still need to define an Receive Event Activity in my customer WF?
Thx, Suresh

Hi,
1 - It's probably neither here nor there, to be honest. If it can be avoided, then I would always avoid launching a process from a trigger. However, you may have no other choice than to fire the workflow from a trigger - bear in mind that you will need to defer the process to the background and run a background engine later to start the process off, as the first node will issue a savepoint which is not allowed in a trigger.
2 - Yes. If you are defining a custom event, you will still need to raise the event in some manner, though. If you can hook into a seeded event, then that's the best way to do it.
3 - The workflow process needs to have a receive event node to receive the event. If you are starting the process, then this needs to be set as a Start node. You will then have to ensure that the event gets raised.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Trigger custom workflow from a custom form

Hi all,
I have to trigger a custom workflow from a custom form.
I am working on 11.5.10 using forms 6i.
Please suggest how to trigger a custom workflow from a custom form and what are the pre requisites and additional settings to be done for this.

Hi,
Please follow the below mentioned steps in order to achieve the desired solution:
1. Create the custom workflow and compile it in data base.
2. Customize the form to trigger the custom workflow using 'WF_ENGINE.CREATEPROCESS' API.
3. Pass parameters as 'ITEMTYPE', 'ITEMKEY', 'PROCESS NAME' AND 'USER KEY'. Though user kay is not mandatory, it helps to identify the workflow if searched using status monitor.
4. After calling create process, set the required workflow attributes and call API 'WF_ENGINE.STARTPROCESS' to start the workflow.
5. Make sure you commit the activity after successful call.
Let me know if you need any additional information.
Regards,
pP.

Integrate custom workflow with UWL Iview

HI,
Can you provide me with steps or any documentation on how to integrate a custom workflow developed in ABAP on a R/3 with the UWL Iview in Enterprise Portal.
Thanks
Kirupanand
Message was edited by: Kirupanand Venkatapathi

Hi
Please go through the weblog:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2778. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Hope this helps you.
Regards
Victoria

Cannot Access Custom Workflow Process List (SharePoint 2007)

Does anyone know how to access the "Custom Workflow Process" list when using custom form actions in SharePoint 2007?
There are quite a few items in this list and I need to reduce the list item size.
Thank you for checking!

Did you try below script
social.technet.microsoft.com/wiki/contents/articles/powershell-script-to-list-out-webparts-used-in-publishing-pages-in-sharepoint-2007-and-sharepoint-2010-sites.aspx
param([switch]$help)
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Publishing")
function GetHelp() {
$HelpText = @"
DESCRIPTION:
This script will list out the webparts type along with the names in publishing pages in any site .
$HelpText
function RahulPublishingPageWebParts() {
write-host "This script will enlist the webparts used in all publishing pages in this site"
write-host "Please enter theURL of the site"
$siteURL = read-host
$site = New-Object Microsoft.SharePoint.SPSite($siteURL)
$web = $site.OpenWeb()
$webPublish = [Microsoft.SharePoint.Publishing.PublishingWeb]::GetPublishingWeb($web)
$pages = $webPublish.GetPublishingPages()
foreach($page in $pages)
$manager = $web.GetLimitedWebPartManager($page.Url,[System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webCollection = $manager.WebParts
if($webCollection.Count -ne 0)
write-host "The page " $page.Title " contains these webparts"
for($i =0;$i -lt $webCollection.Count; $i++)
write-host ($i + 1).ToString() " " $webCollection[$i].GetType().Name " " $webCollection[$i].Title
$site.Dispose()
$web.Dispose()
if($help)
GetHelp; Continue
else
RahulPublishingPageWebParts
If this helped you resolve your issue, please mark it Answered

Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation

Hi,
We have customized Quote Approval Workflow (ASOAPPRV) XXXASOAPPRV, would like to understand how to setup that custom workflow XXXASOAPPRV will be triggered for Quote Approval process, when we submit the Quote for approval from Quotes screen.
Appreciate your help on this.
Regards,
Ram

Pl see your duplicate post here - Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation
Srini

How to add a custom button in WD screen to call a workflow in siebel?

Hi All,
We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
Thanks in advance!!
Regards,
Subhradeep

Subhradeep,
Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
<html>
     <head>
     <script language="JavaScript">
          setTimeout(closeMe, 3000);
          function closeMe() {
               alert("This window will close");
               top.close();
     </script>
     </head>
     <body><B>This window will close in three seconds</B></body>
</html>
{code}

How to invoke a custom Workflow in standard PCR

Similar Messages

Maybe you are looking for