How to isolate a system to be upgraded?

1) We are upgrading a system and being required to isolate the CI.
2) Before we came to above point, we already were prompted to lock the development environment.
Are 1) and 2) the same thing?
If not, isolating a CI means what steps to be taken?
Thanks a lot!  <removed_by_moderator>
Edited by: Juan Reyes on Dec 8, 2009 8:36 PM

Please check Trubleshooting guide. There is clearly desribed how to isolate CI and which steps need to be done.
Pasted from guide:
The troubleshooting and administration documentation is included in the upgrade program.
The upgrade tool unpacks the documentation at the beginning of roadmap step Extraction.
You can access the documentation as follows:
- From a link on the upgrade GUI. Proceed as follows:
1. If it is not running yet, start the upgrade program.
2.On page http://<host name>:4239, choose ABAP documentation.
3.Choose Troubleshooting and Administration for Systems Running on <platform>.
OR:
From file Troubleshooting_and_Administration_<platform>.pdf in directory UPG/abap/htdoc

Similar Messages

  • How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

    SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
    But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
    common system crashes in SAP Business One

    Hi,
    Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
    Thanks & Regards,
    Nagarajan

  • My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

    Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
    The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
    Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
    Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
    Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
    If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
    Thanks,
    eidnolb

  • How i can change system ECC to ERP in Solman

    Dear SAP Colleague,
    I have configured the service desk in Solman. We have ECC 6 system in the landscape.
    but i have add these system as SAP ECC system in Solman, and now when i am trying to upgrade these system for EHP4 its showing me the erro that system has to be defined as ERP system
    Please do let me know how can change these systems from ECC to ERP (node) in Solman. As I can checked in the system i am ble to delete and add these system again because these are used in some projects as well as in logical component.
    Is there any ways to change the system from ECC to ERP ?? and what will be the impact when i change it.
    Regards,
    Bhavesh

    Hi,
    If you are upgrading your ECC system to EHP4. Then  in order to download packages from MOPZ you have to register your system as ERP 6.0 in SMSY transaction in solution manager.
    Check this link https://websmp204.sap-ag.de/~sapidb/011000358700000293582009E.PDF and go to page 20. There you will find step how you can change it and It will not have any impact.
    Thanks
    Sunny

  • How vulnerable is my system preferences?

    I just upgraded to 10.3.9 from 10.3.8. I noticed that if I lock a system preference pane (little lock in lower left corner), it will be unlocked the next time I boot my computer or do a restart. Is this normal? My concern is with the System Preferences/Sharing/Services or Firewall. If it is unlocked, how vulnerable is my system to someone else? Especially, the Firewall Pane?
    Thanks,
    YeeHa!

    1. Unless you've performed the instructions on this page, yes.
    2. If someone has physical access to the computer, they can just change the settings.
    (15267)

  • HT5527 When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

    When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

    Note that the method for paying to continue your complimentary storage isn't entirely intuitive:
    If you wish to continue your current storage level, the instructions are here:
    http://support.apple.com/kb/HT5527
    Scroll down to 'How do I purchase my current plan?' and expand the section applicable to your computer or device.

  • PI System Support Pack Upgraded from 04 to 07

    Hi Guys,
    In PI system basis people upgraded support pack 04 to 07.
    how i will check the PI system functionality after upgrading support package 04 to 07...
    first basis people upgrated in PI Development system. after they will do in PI Quality and PI Production.
    is there any effect on PI existing interfaces once it comes to live system production..
    can any one please help me on this.
    Thanks,
    Siva.

    first basis people upgrated in PI Development system. after they will do in PI Quality and PI Production.
    is there any effect on PI existing interfaces once it comes to live system production..
    backward compatibility is provided so if you upgrade a SP then your existing interfaces will continue to run without any issue/ modification.
    The only thing that you need to take care is that all your environments (DEV, QA, PROD) should be on same level so that transport of objects is not affected.

  • How to consolidate BPC system into existing BW system

    Hi
    We have BPC system running only BPC (extract data from BW) it is
    801sp02 (abap/basis 731 sp5) and we have also a BW system 731sp8.
    Now we want to have just one single BW system, and to integrate the BPC
    functionality into the BW system.
    1) Any advise on how to consolidate BPC system into a BW system (technically any implementation
    wise) ?
    2) What are the implementation consideration? How to transport the BPC configuration and
    transaction data from the BPC system into the BW?
    3) Technical basis wise seems to be simple to me, just import the BPC addon and SPes using SAINT (done already)
    Thanks,
    Moti

    Hello,
    As you mentioned you can use SAINT to install BPC in your BW system.  After installing BPC then you can use UJBR to backup your environments from the other system and restore them in your new BPC system.
    My only recommendation is that if you are going to upgrade BPC you should do it in your source system and after testing then do the backup and restore to the new system.
    Best Regards,
    Leila Lappin

  • How to do a system copy in MSSQL 2005

    Hi,
    Pls let me know how to do a System Copy for ECC6 in MSSQL 2005
    Regards,
    Manjunath B

    Hi Maria / Manjunath, you can follow the instruction at http://service.sap.com/msplatforms -> SQL Server -> Upgrade to and Installation of SQL Server 2005.
    Also you can go to http://service.sap.com/instguides -> SAP Netweaver 7.0 -> Installation -> System Copy for SAP Systems Based on NW 7.0 SR1 ABAP or System Copy for SAP Systems Based on NW 7.0 SR2 ABAP
    If you have any other question, please post it.
    Regards,
    Darwin Castillo
    SAP Netweaver System Administrator
    Edited by: Darwin Castillo on Mar 9, 2008 11:49 AM

  • How do I restore System Restore?

    How do I restore System Restore? I am running Firefox 17.0 on Windows XP SP3.

    The pop-up asking if I wanted to upgrade to FF 17.0 had a link to a warning that it might disable System Restore. I clicked “No” for the update not wanting to lose System Restore but 17.0 somehow loaded anyway. Since Mozilla techs knew that 17.0 could cause System Restore problems, I am hoping they will know how to fix them.

  • How can I uninstall this latest java upgrade?

    I just installed a java upgrade called "build 1.6.0_05-b13 and now I cannot get Microsoft Front Page 2003 to work. I have to use MS Front Page to maintain my website. How can I uninstall this latest java upgrade so it will go back to using my previous version of java?

    I believe you may have posted your question to the wrong forum. This forum is for the JavaHelp system, which is used for developing online Help for applications, not for general help on Java.

  • PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

    Hi
    We ve go a  Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
    I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
    Thanks in advance
    Michael

    Hi Michael,
    Please refer here for the mapping API description:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
    You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
    You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
    Hope this helps,
    Greg

  • How to get the system time in a Swing application ?

    I know how to do it in JavaScript, but not java. Please help me, and also how to get the system time in an Applet. Thanks !!!

    Check this link, I hope it helps
    http://202.71.136.142:8080/globalleafs/Swing/View.jsp?slno=22&tbl=0

  • I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I hav

    I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments. I have been using Apple products for years, always touting their reliability and customer service. I am not a techie, I just want to be able to do what I do on the computer and Apple always fulfilled my needs. Now I am told because of some operating system gobbledygook, I have to go out and purchase new software to use Word. This is despicable. I see no particular benefit to using Lion, but I do see a lot of detriments. Apple now seems to have turned into Microsoft, making software obsolete so they can make more money and to **** with the customer. You can be sure that my next computer will be a PC. I have completely lost confidence in Apple.

    I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
    I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
    As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

  • How do you clear system and application logs in a server?

    Hello all,
    How do you clear system and application logs in a server?
    thanks,
    mike

    go to start button,all programs,assosories, System tools T event viewer. now select application & rt click & clear & do not save.similarly do for sytem too.

Maybe you are looking for

  • How to implement multiple Value Helps within the same Application ??

    Dear Experts, I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the applicat

  • XML - XSLT to HTML

    I am very new to java and am trying to do a simple transformation from XML to HTML using. I have been working in JavaScript and do this all the time but i am really strugling to make it work in JAVA. i have a simple function public void transformXML(

  • How to increase member name length in essbase studio

    Hi All, Currently we have requirement to build a hierarchy which contains member having length more than 80 characters. I seen somewhere where the member name limitation is 80. Can someone help me out how to build the hierarchy with long member name

  • Acrobat 8 Pro fails to Save As or Create PDF or otherwise save new PDFs

    I am running 8.1.2 on a MacBook Pro with 10.5.4 and the whole Master Collection installed. So, here's what's going on: If I open a PDF in Acrobat and make changes to it, I can save it, but I cannot "Save As." It will go through the normal routine of

  • How do I make a 3D shape or mesh transparent?

    I have a photo of a bottle I need to mock up with a label I designed. Warping placed graphics isn't doing the trick, it looks wonky. I made a 3D mesh and loaded my label as a texture onto it so that it matches the shape and angle of the bottle. Probl