How to issue an error message in srm using BBP_DOC_CHANGE_BADI implem?

Subject....
This can be easily done in BBP_DOC_CHECK_BADI using et_message exporting table. There's no table like that in DOC_CHANGE_BADI. Please Advise.

Hi
First, let me one thing like "ET_MESSAGES" is not a database table it is an EXPORTING parameter of BADI (BBP_DOC_CHANGE_BADI).
This exporting parameter is referred to one TABLE TYPE (BBP_TMESSAGES_BADI) and internally it refers to the structure (BBP_SMESSAGES_BADI).
So, what you need to do is just capture all the error messages in to some internal table and loop the internal table and populate "ET_MESSAGES" internal table which is a exporting parameter.
Hope it helps you.
Thanks
Siva

Similar Messages

How to issue an error message in SRM portal?

Subject...
I've tried using FM BBP_PD_MSG_ADD in BADI implementation BBP_DOC_CHANGE_BADI but it's not working. There's always an exception LOG_NOT_FOUND.
Please advise.

Hi,
Any error generated from SRM will be visible in Portal view. No additional configurations or developments are required for that purpose.
In order for messages to generate, you will ve to use BBP_DOC_CHECK_BADI.
DOC Change BADI is meant for changing the SRM application documents based on customer's own criteria.
Regards
Virender Singh

How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

How to populate a Error message in WebUI Screen

Dear Experts,
I have a small issue in Lead creation screen. I need to restrict the followup document if the lead end date is lesser than the system date, if the end date lesser than the system date system should through a error message in web Ui Screen and the lead follow up creation should be stoped.
We found an enhancement spot in backend(GUI) of lead creation we raised the error message in the backend screen. Here its working fine, But we are not able to get any error message in WebUI lead creation screen.
We written the code in CREATE_ORDER Method of lead creation in GUI ( tcode : CRMD_ORDER). We tried to debug the program using external debuger from webui but its not getting triggered.
Pls suggest me, how to raise a error message for WEBUI lead follow up creation validation.
Kindly do the needful.
Reg,
Anandhan

HI Anandhan,
Try this way,
This should work.
lr_global_messages type ref to cl_crm_genil_global_mess_cont,
        lr_core                 type ref to cl_crm_bol_core,
"Instantiate the error message class.
lr_core = cl_crm_bol_core=>get_instance( ).
if lr_core is bound.
    lr_global_messages ?= lr_core->get_global_message_cont( ).
endif.
        if lr_global_messages is bound.
          call method lr_global_messages->add_message
            exporting
              iv_msg_type       = lv_msg_type
              iv_msg_id         = '
              iv_msg_number     =
              iv_show_only_once = 'X'
              iv_msg_v1         =
              iv_msg_v2         =
        endif.

How to get the Error message from hr_contact_rel_api.create_contact

Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Js

user12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein

Question on issuing a error message

HI All,
I am new to WDA.   I am developing a WDA application, on the first view I have a table and a button to go to the next view.
When the table is empty i need to issue a error message in the message area and the user should not be able to navigate further using the NEXT button.
I want to display this message before the user does some action i.e ( before the button trigger ).
Can some one help me how to achieve this.
Thanks,
Krishna

i need to issue a error message in the message area and the user should not be able to navigate further using the NEXT button.
now if ls_cn_input is INITIAL , u need to generate a error message and disable ur NEXT button
//for generating the error message
// this can be done by code wizard ( cntrl +f7) as well by selecting the radio button generate message and select the
// method *report_error_message*
*    DATA lv_message TYPE string .
**     get message manager
*    DATA lo_api_controller     TYPE REF TO if_wd_controller.
*    DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
*    lo_api_controller ?= wd_this->wd_get_api( ).
*    CALL METHOD lo_api_controller->get_message_manager
*      RECEIVING
*        message_manager = lo_message_manager .
**     report message
*    CALL METHOD lo_message_manager->report_error_message
*      EXPORTING
*        message_text   = 'Please enter data before exit .'.
// ur error message
the user should not be able to navigate further using the NEXT button.
// disable the NEXT button
u procced as follows :
1 create a context attribute of type WDY_BOOLEAN
2 bind this with ur button UI
3 nw using set_attribute method , set its value to ' ' ( ie blank)
again this cn be donr thru code wizrd by selecting read context node/attribute
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
    DATA ls_cn_node TYPE wd_this->element_cn_node .
    DATA lv_attr LIKE ls_city-ca_attr.
*   navigate from <CONTEXT> to <CN_VISIBLE> via lead selection
    lo_nd_node = wd_context->get_child_node( name = wd_this->wdctx_ca_attr).
*   get element via lead selection
    lo_el_cn_node = lo_nd_cn_node->get_element( ).
*   set single attribute
    lo_el_cn_node->set_attribute(
      EXPORTING
        name = `CA_ATTR`
        value = ' ' ).
// I have read ca_attr attribute under context node cn_node
// this attribute is binded to button UI
I hope it helps
rgds,
amit

How do I overcome error message 1612 when updating acrobat 8 standard ?

How do I overcome error message 1612 when updating acrobat 8 standard ? Kent

Moving this discussion to the Acrobat Installation & Update issues forum.
[email protected] you may want to review the steps listed in Error 1714 | Acrobat, Reader - http://helpx.adobe.com/acrobat/kb/error-1714-acrobat-reader.html as it does reference the 1612 error.

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How can we trigger error message in BADI PARTNER_UPDATE

Hi All,
I have implemented a BADI PARTNER_UPDATE. In this I have validation ( Error Message ) on saving buisness partner.
It is giving the error message but it freeze all the fields. On pressing enter it goes for short dump.
In short dump it gives error The COMMIT WORK processing must not be interrupted.
Kindly suggest me that how can we pass error message and it also does not freeze the fields.
Regards,
Narendra Goyal

Hi Narendra,
How are you trying to display message.
Is it using message service class instance of message statement (which should not be used, as that is for GUI messages) or using collect FM or by adding to genil message class container.
Please try different approaches and see what works for you.
Thanks,
Rohit

How to display an error message after validation in Formatted Search?

Hi SBO experts,
if an error is detected on validation in a Formatted Search, how to display an error message to the user entering the data?
Thanks & Regards,
Raghu Iyer

i created a formatted search query & attached it to the field 'Quantity' at Line Item level in Sales Order screen. just for testing purpose, i eneterd the following code lines in the query validating 'Quantity'
if $[$38.11.0] > 50
begin
select @error = 1
select @error_message = 'Vendor code cannot begin to X sign.'
end
the system throws the error : Internal error (8180) occurred [Message 131-183]
actually, i need to display an error message to the user if Quantity is not in multiples of the OITM.SalFactor2
if $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0]) > 0
begin
select @error = 1
select @error_message = 'Error in Quantity.'
end
but, this expression to get the remainder itself seems to have some error
$[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0])
i guess, % operator is used for modulo (to find the remainder of one number divided by another.) ? am i right ?
Regards,
Raghu Iyer

How to display an error Message in Web Dynpro

Hello,
I want to display an error message in Web Dynpro. I'm using this,
IWDMessageManager message = wdComponentAPI.getMessageManager();
message.reportSuccess("<some relevant debug message>");
However, the message is always shown at the bottom of the screen. It is possible to select the location in the screen for showing this object? Or what is the best way for doing this? I've tried to use a Label but I can't set the type (warning, error, info) it's only a message.
Thanks
Regards
SU

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

How to display an error message on screen?

Hi experts,
In screen painter, how to display an error message in the message area just below the screen?
Thanks!

hi wuyia,.
Write like this;
Message 'Process completed Successfuly' TYPE 'S'.
Message 'Want to Overwrite Value' TYPE 'W'.
Message 'Press enter to continue' TYPE 'I'.
Message 'Invalid Input' TYPE 'E'.
S - Success
W - Warning
I - Information
E - Error
You can adjust your GUI option to display the message in a Popup or in the status bar.
Regards
Karthik D

How to configure a error message

Hello,
I have a User bean that hold informations about a user login ( login and password ). I write a method protected String logon() that search if the login and the password entered by the user match with those stored in a database. If not, i would like to add an error message to the FacesContext and so return null value.
My question is : how to add an error message to the FacesContext and so to get it in the current page.
Thanks

Hi flam70,
well, in my opinion you should do any access to your business logic in an action class and in the invoke application phase and not in the validation phase.
Your Action class returns e.g. "success" if the user passed the authentication and "null" if not (if jsf gets null value it returns on the same page back)
To put the error message into context you may do following:
In the invoke() Method of your Action class do authentication against your database.
If it fails, use the component(s) that were wrong for the error message(ids e.g. "username" and "password").
Add the message into context:
context.addMessage(nameComponent, new MessageImpl(Message.SEVERITY_INFO, "Username not found !", "LoginError"));
context.addMessage(passwordComponent, new MessageImpl(Message.SEVERITY_INFO, "Password wrong !", "LoginError"));
On your jsp page you use the error tag:
<h:output_errors for="username" />
<h:output_errors for="password" />
Greetings,
Rene

How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

How does one fix error message "There is a problem with Adobe Acrobat/Reader.
If it is running, please exit and try again. (6:6)

http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page. The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association. I have just gone through every link on the site and a number of links when clicked on will not bring up the material. I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page. However when I went back to test all the other links I found that the problem was still re-occuring. This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now. I downloaded adobe 10.1 on 8 March 2011.
I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
If you can help I would appreciate it.
Pat

How to issue an error message in srm using BBP_DOC_CHANGE_BADI implem?

Similar Messages

Maybe you are looking for