How to Issue Output for a Single Handling Unit from Shipment

Hi,
I would like to know how to issue an Output for a Single Handling Unit from Shipment, i mean i have attached an output type 'ZPN0' (Customised) to a Handling unit in the Tcode VT03N to a Handling Unit.
VT03N>click on Handling unit icon> select a handling unit --> go to Extras --> Output --> give the Out put type (maintained)) -- > saved.
Once i come back --> i did not find any option / icon to issue the output from VT03N for handling unit. We have an option to issue output for the Entire Shipment.
Tried alternative by going to VT70, give the shipment no, and output type for handling unit. When executed, Getting a message "No Messages Found".
let me know how to issue the output for a handling unit of the shipment. Only Handling Unit & not the entire shipment.
Regards,
Swapna

Dear Swapna ,
maintain out put type for handling units in V V 61

Similar Messages

Output for a Single Handling Unit from Shipment

Hi,
I would like to know how to issue an Output for a Single Handling Unit from Shipment, i mean i have attached an output type 'ZPN0' (Customised) to a Handling unit in the Tcode VT03N to a Handling Unit.
VT03N>click on Handling unit icon> select a handling unit --> go to Extras --> Output --> give the Out put type (maintained)) -- > saved.
Once i come back --> i did not find any option / icon to issue the output from VT03N for handling unit. We have an option to issue output for the Entire Shipment.
Tried alternative by going to VT70, give the shipment no, and output type for handling unit. When executed, Getting a message "No Messages Found".
let me know how to issue the output for a handling unit of the shipment. Only Handling Unit & not the entire shipment.
Regards,
Swapna

Hi,
For VT70 transaction have entered the Print control and Output device.

How to disable iMessage for a single contact?

Hello apple communites, I have a simple and hopefully simple to answer question..
I am curious as to how to disable iMessaging for a single contact. My sister when she got her phone number originally had an iPhone, she has since gotten an android and kept the same phone number. However I am running into issues with text messages to her, my phone still thinks she has an iPhone and continues to send every text as an iMessage, resulting in a failed message. I can easily hit the "send again as a text message" option and the message/picture sends as normal. I however find this a bit fustrating, and have tried everything I can think of to attempt to disable this. However all the online tutorials I can find regarding disabling iMessage turns the feature off completly, I don't wish to do that.
I have attempted to completely delete, (including all existing all texts and call history), and then re-add the contact, but that does not work either, my iPhone still attempts to send messages to my sister as an iMessge. Any help, if any, would be appreciated. Thanks in advance.

Your sister needs to disable iMessage on her iPhone if the iPhone is still available if she hasn't already done so.
If she has, does she have iMessage enabled with the same Apple ID on another iOS device or on a Mac as was used to activate iMessage on her iPhone?

Output type for non assigment Handling Unit

Hi All.
I would like to make a Output type for non assigned Handling Unit
Can anyone tell me about it?
Edited by: John Brown on Feb 9, 2010 10:53 AM

Make a new output type, transaction NACE, application V6 (Handling unit) and assign the output type to your output procedure.
Create a new output requirement, transaction VOFM and assign it to the output type in the output procedure. In the requirement check on KOMKBV6-VPOBJ. The value of KOMKBV6-VPOBJ shows to which object the handling unit is assigned: '00' or empty for not assigned, '01' for outbound delivery. See the domain VPOBJ for all possible values.
Reagards Jack

More than one deliveries into a single handling unit

Hello,
We are a retail apparel company and use SAP to communicate delivery requirements for our stores. We would like the ability to consolidate our deliveries into a single handling unit. This will help reduce freight and will simplify our receiving process in our retail stores.
For example, many customers pre-order merchandise that will be received into our distribution center and then shipped to a Retail store for customer pickup. We would like to consolidate mutliple orders going to the same place so that they can be packed into a single box. Each customer request results in an order being created and the box that the order is packed in is the SAP handling unit. The issue we have is that if 10 customers request the same merchandise, it is easier to pack the 7 units into a single handling unit (i.e. box) than to pack 7 boxes.
I do realise that the handling unit table VEKP can hold only 1 delivery object (i.e. VPOBJKEY), however I'm hoping that someone can highlight possible options for us to simplify our shipping process.
thanks in advance
RJ
if we need to utilize shipments, is someone able to walk through what setup steps would be required.

Dear RJ,
You may use WAVE concept in WM in order to accomplish the requirement.
A wave is group of deliveries that can be combined into one order based upon the customer number.
For example: If you have 10 different orders from customer XYZ and you may consolidate the all sales orders in one single order and then create a WAVE for that.
Thanks,
Babu.

Error:Assign handling Unit from one Process order to another process order

Hi Experts,
I am facing different issues in assigning handling unit from one process order to another.
Business process:
1. Two similar Process Orders are existing in the system
2. Delivery is created for first process order using LP10 for one or more components
3. TO is created in foreground using VL06P
4. TO is confirmed by providing in stock available Handling Unit (HU) / storage Unit details Using LT12
5. Customized transaction is used to reassign newly created HU (created in previous step) from first process order to second process order. As a result many steps are performed in background for delinking the HU from first process order to second process order (including creation of different TOs)
I am facing different issues in the process:
1. Sometimes while confirming the TO in step 4: error is received as "Reservation item 0065 with material 4013959300300 does not exist" OR "Reservation item with material does not exist"
2. If the TO is confirmed in step 4. I am facing error in step 5 as "Warehouse number does not exist (new selection required)"
Both these errors are standard errors and I could not find much information on them in SCN also.
If anyone can throw light on any of them then it would be great.
Please let me know if any additional information is required.
Thanks
Harsh Aggarwal

Hi Manish
Thanks for your response. Actually, the customized program is used only in fifth step and not till TO confirmation so that error is not related to Customized program. However, in some cases I am able to do the confirmation but the error is received in 5th step i.e. Warehouse number does not exist (new selection required)"
Any further guidance you can provide. I will ask ABAP to check the customized program but the error seems to be a standard error.

Identifying single motor units from EMG data

I need to identify single motor units from EMG data and have been unable to find anything on the NI web site that could help. I have identified a third party program, Spike 2 from Cambridge Electronic Design (CED), that is able to do the job however I have already go a large investment in NI hardware and software and do not want to have to buy all the CED hardware. I was wondering if anyone knew if it were possible to control the spike 2 program from inside LabVIEW (in close to real time), or if there was a LabVIEW based solution that I have been unable to find.

Sorry for the confusion.
This post is regarding template matching/detection of events from a nosy analogue signal. It is a medical application, not a motor/servo application. The term �motor unit� refers to the action potentials found in electrical recordings taken from muscles (EMG). By identifying the occurrence of these events we can determine properties of the nerves controlling these muscles. However identifying these events is very difficult as the recorded signals are noisy and the shapes of these units change over time. Many researchers have attempted to design computer-based solutions to this problem but is has only been with recent improvements in computer power that a solely software based solution for real time pattern matching has been possibl
e. Although this application is specific to medical research (and electrical recordings of nervous system activity in particular) the number of research laboratories around the world attempting to perform such analysis is large enough that I though a LabVIEW base solution may exist.
Barring a LabVIEW based solution I was wondering if anyone knew if it were possible for the data to be acquired in LabVIEW then directed to Spike2 (the most common program used for this application) in almost real-time. I know I can record data in LabVIEW and save it as a text file then open it up in Spike2 but I do not know if I can stream the data into Spike2 online. Online processing of the data is necessary to determine the progress of the experiments.

Goods Issuing Many Materials From a Single Handling Unit

Hi Experts!
I have searched threads and asked various contacts how to do this but can't get anything beyond the basics of handling units that we have already implemented.
I am using handling units to pack outbound deliveries and have managed to get to the point where the packaging material is goods issued, however when the product is packed we use (for example)
- a box
- a label
- some sealing tape
- some ink etc
and I want to be able to goods issue all the items involved not just a single packing unit - does anyone know how to do this?
(I have looked at multi level packing e.g. put a product in a box and 10 boxes onto a pallet, but this would only goods issue the box and the pallet)
Thanks in advance!
Simon.

Hi,
I am using packing instructions set up in POP1 and assigned to a customer via POF1 to pack a number of products into a box. The box (packing material) is inventory managed so when the delivery is created and a plant assigned to the handling units it creates an extra line on the delivery that can be post goods issued. We have auot packing set up on the delivery type I am using. This works fine.
My question is that the above set up only post goods issues one of the items used in packing my finished products (in this case a cardboard box), I am trying to find a way of goods issuing other packing materials at the same time such as packing placed with the product inside the box, the tape used to seal the box and the label that we will put on the side of the box.
I think that it would be possible to use a process order and complete the activity in PP and use a Bill Of Materials, however I want to see if I can take advantage of the automatic packing functions.
I hope that this makes sense.
Regards,
Simon.

How to disable cache for a single query ?

Hello BW Experts,
I am running a Bex query. since the cache is not getting cleared it shows me wrong results. how to disable the cache settings for a single query ?
are these settings different if you are running query using a web template..
Please suggest.
Thanks,
BWer

check also this post:
Re: Query cache question

How to disable Soundcheck for a single Album

Hello,
Soundcheck option in Preferences works pretty good for me, since I shuffle from classical to metal.
But, inside a single album, say, an Opera which is meant to be fully played w/out pauses, I don't want the volume to be leveled throug Pianissimo and Forte tracks.
Question:
Is there any way to disable Soudcheck for a single Album so iTunes does NOT calculate peek levels on its tracks and does not set gain/loss accordingly?
Or do I need to turn off Soundcheck on the iPod when I want to listen to that particular Album?
I have tried "Volume level" slider but it sets the overall volume gain of the Album and not the relative level between tracks. Also the "pauseless" option (sorry, I use a localized version) is no solution.
TIA

Is there any way to disable Soudcheck for a single Album
No.
Or do I need to turn off Soundcheck on the iPod when I want to listen to that particular Album?
Yes.

How to configure output for adobe forms in sap,,if i want to pront an invo

Hi,
I used adobe forms in GTS.
BUt in normal SAP system,i want to use adobe form to print an invoice data.
I wantt o use the standard form and standard interface for that.
But how to do configuration for this?
normally for smartforms we do it in NACE transdaction?
But for this adobe forms what is the driver program,,where to configure this form and interface.
Thanks in advance,
sasi

Hello,
it is the same way how you will configure for smart forms.
Standard driver program is : RLB_INVOICE
Please go through this link, how to configure print forms for invoice.
http://****************/Tips/SmartForms/NACE/Configuration.htm
Edited by: rakhi966 on Sep 9, 2011 9:22 PM

How to disable output for Delivery and shipment

Hi experts
I would like to disable the output for the delivery and shipment. Please let me know any code logic or function module for this.
Thanks and regards,
Jayakumar Mani.

Hi,
Use the requirement routine in transaction code NACE -> Procedures.
Regards
Vinod

Archiving process for batch and handling unit

Hi Guru,
Need your help in achiving process. I would like to achive batch and handling unit information in SAP. Is it possible that, I can just achive these information without archiving sales order, inbound delivery, outbound delivery and etc document ?
If there are 3 line item in sales order document, only 2 line item are shipped and 1 still open, for this scenario can the batch and handling unit information be archive. Or all the line item for that sales order line must completed then only can be archive.
Pls advise.
Any information will be appreciate.
Rgds,
LH.

unfortunaltey to archive boms you have to archive alle predecessing documents before you can start this one.
go to transaction SARA for object MM_SPSTOCK and click the button for 'Network Graphic'. it will tell you very colourfull what you have to do before attempting to archive boms.
same goes for handling units, object LE_HU. Check in SARA.

How to script schema upgrade as single success unit

We currently use a combination of Ingres and SQL Server databases. When upgrading a schema of our own design we will script the upgrade as a single success unit. If any part fails then the whole lot is rolled back. (This is a slight simplification but it's the general principle we follow). However in Oracle I believe DDL statements are automatically committed. This is thwarting our attempts to adopt the same approach with Oracle.
As a simple example say a column is being moved from one table to another (for whatever reason). The application changes to be implemented depend on three things happening:
1. table_new has column_new added to it
2. column_new on table_new is populated from column_old on table_old
3. table_old has column_old dropped from it
so the upgrade script will run something like:
Start Transaction
alter table table_new add column_new(etc... ;
update table_new set column_new = (select column_old from table_old etc.... ;
alter table_old drop column_old ;
If Error then
Rollback
Else
Commit Transaction
This way if there is an error then the database is left in a state that works with the old application code. If the upgrade succeeds then the new application code can implemented.
So my questions are:
1. Am I correct in thinking that in Oracle, step 1 above will commit as soon as it's submitted preventing rollback?
2. If so then what would people recommend as a way to achieve a single success unit for a schema upgrade?
We were hoping to use flashback with restore points to perform the equivalent of a rollback if there were any errors in the upgrade script. Having tried that this afternoon though, I received an error about being unable to flashback the table because it had been changed (don't have the error here I'm afraid as I'm at home now). Would restoring the tablespace (we are setting up one tablespace per schema) to a point in time before the upgrade script started be reasonable? It seems a little extreme and also considerably more difficult to script than the flashback option. Otherwise I'm thinking that some combination of creating a new table, populating it, dropping the old table, renaming the new table with the original name might be an option. However this obviously has much greater overheads, higher chance of error and considerably more messing about if constraints, rules and procedures are involved.
Any suggestions or corrections on what I've added above are appreciated.
thanks
Mark

Thanks for the responses.
Unfortunately this will always be a case of altering the schema rather than creating it once applications are running against Oracle.
Tablespace point in time recovery is probably looking like the best option so far. A script would only ever upgrade one schema at a time and we're setting things up to use one tablespace per schema.
Proving and then rehearsing a TSPITR (as I believe it's called) is on the list of things that we need to do but it seems like it may be needed as a more routine tool than just in emergencies. I shall concentrate my reading in that direction. Would anybody care to offer any opinions on automating restores for this situation? We have people on call but generally only plan to come in out of hours to check the outcome of big upgrades. Smaller schema upgrades are left to pass or rollback overnight.
It's a real shame that flashback works at the database and table levels but does not have a tablespace option as that would be perfect. Flashing back the whole database could be problematic as we will probably end up with multiple schemas in each database, each one being used by different applications so we could realistically have applications running against some schema_a whilst we're upgrading schema_b. Flashing back the whole database would obviously then cause problems in schema_a, or schema_a or the associated application would have to be suspended while we upgraded schema_b. Whilst we're lucky enough to have some downtime with most of our applications, this is gradually disappearing and there are some which are now approaching 24/7 availability.
I'm still open to other suggestions though. This seems so much more complicated than the approach which has worked for Ingres and SS. Do you apply schema changes whilst the system is running? Does somebody do this manually or is it scheduled?
thanks again
Mark

Function Module for UNPACKING Handling Unit from Inbound Delivery

Hello Experts,
I am working on a RFID program to Receive goods from vendor...
One of the steps of the program should CHANGE the quantity inside a received batch.
To do so, I need to UNPACK the Handling Unit first... then change the quantity.
I am using the following Function Modules to do so:
- 'HU_GET_HUS'
- 'V51P_FILL_GT'
- 'HU_PACKING_AND_UNPACKING'
- 'HU_POST'
First 2 FM works fine...
But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
Have anyone done this before??
Here's the code I've done to do some testing before putting it into my code...
PLEEEEEEEEEEEASE HELP.
TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
DATA: wa_object LIKE hum_object,
      it_object TYPE TABLE OF hum_object.
DATA: wa_v51vp LIKE v51vp,
      it_v51vp TYPE TABLE OF v51vp.
DATA: flag LIKE v51p_select_flags.
DATA: it_venum            TYPE STANDARD TABLE OF hum_venum,
      ef_rcode            LIKE sy-subrc,
      et_vekp             TYPE STANDARD TABLE OF vsep_s_vekp,
      et_vepo             TYPE STANDARD TABLE OF vsep_s_vepo,
      et_vevw             TYPE vsep_t_vevw,
      et_highest_level    TYPE vsep_t_venum,
      et_messages         TYPE huitem_messages_t,
      is_packing_request TYPE vsep_s_pithu,
      es_p_request        TYPE vsep_s_pithu,
      es_item             LIKE vepovb,
      cs_header           LIKE vekpvb,
      ef_number           TYPE vpobjkey,
      et_header           TYPE STANDARD TABLE OF vekpvb,
      et_items            TYPE STANDARD TABLE OF vepovb,
      et_item_serialno    TYPE vsep_t_rserob,
      et_history          TYPE hum_history_t,
      et_highest_levels   TYPE hum_venum_t.
DATA: wa_venum            LIKE hum_venum,
      wa_vepo             TYPE vsep_s_vepo,
      wa_vekp             TYPE vsep_s_vekp,
      wa_items            TYPE vepovb,
      wa_header           TYPE vekpvb.
START-OF-SELECTION.
wa_venum-venum = p_venum.
APPEND wa_venum TO it_venum.
CALL FUNCTION 'HU_GET_HUS'
    EXPORTING
      it_venum          = it_venum
    IMPORTING
      et_header         = et_header
      et_items          = et_items
      et_item_serialno = et_item_serialno
      et_history        = et_history
      et_highest_levels = et_highest_levels
      et_messages       = et_messages
    EXCEPTIONS
      hus_locked        = 1
      no_hu_found       = 2
      fatal_error       = 3
      OTHERS            = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_header INDEX 1 INTO wa_header.
CALL FUNCTION 'V51P_FILL_GT'
    EXPORTING
      it_venum         = it_venum
    IMPORTING
      ef_rcode         = ef_rcode
      et_vekp          = et_vekp
      et_vepo          = et_vepo
      et_vevw          = et_vevw
      et_highest_level = et_highest_level
      et_messages      = et_messages
    EXCEPTIONS
      hu_locked        = 1
      no_hu_found      = 2
      fatal_error      = 3
      OTHERS           = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_vepo INDEX 1 INTO wa_vepo.
READ TABLE et_vekp INDEX 1 INTO wa_vekp.
MOVE-CORRESPONDING wa_vepo TO is_packing_request.
is_packing_request-belnr    = wa_vepo-vbeln.
is_packing_request-quantity = wa_vepo-vemng.
is_packing_request-veanz    = '-1'.
is_packing_request-meins    = wa_vepo-vemeh.
is_packing_request-exidv    = wa_vekp-exidv.
CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
    EXPORTING
      is_packing_request = is_packing_request
    IMPORTING
      ef_rcode           = ef_rcode
      es_p_request       = es_p_request
      es_item            = es_item
    CHANGING
      cs_header          = cs_header
    EXCEPTIONS
      missing_data       = 1
      hu_not_changeable = 2
      not_possible       = 3
      customizing        = 4
      weight             = 5
      volume             = 6
      serial_nr          = 7
      fatal_error        = 8
      OTHERS             = 9.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'HU_POST'
    EXPORTING
      if_synchron = 'X'
      if_commit   = 'X'
    IMPORTING
      ef_number   = ef_number.
break nunfx004.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in advance,
Fernanda

Hi ,
Check this code.
Pack componet HU to Overpack HU. *
    l_packing_req-venum = g_ovrp_venum.                  "Overpack Internal HU
    l_packing_req-exidv = g_ovrp_exidv.                  "Overpack External HU
    l_packing_req-veanz = '1'.                     "PACK Constant
    l_packing_req-sub_hu_venum = l_int_venum.
    l_packing_req-sub_hu_exidv = l_int_exidv.       "Componet External HU
    l_packing_req-velin = '3'.                      "HU Type Constant
    l_packing_req-quantity = '1.000'.
call function 'HU_PACKING_AND_UNPACKING'
      exporting
        is_packing_request = l_packing_req
      exceptions
        missing_data       = 1
        hu_not_changeable = 2
        not_possible       = 3
        customizing        = 4
        weight             = 5
        volume             = 6
        serial_nr          = 7
        fatal_error        = 8
        others             = 9.
    if sy-subrc <> 0.
error
      clear: v_msgv1, v_msgv2, v_msgv3.
      v_msgv1 = text-031.
   PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
      leave to screen sy-dynnr.
    endif.
No Errors --> POST HU
    call function 'HU_POST'
      exporting
        if_synchron = 'X'
        if_commit   = 'X'.
plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
Regards
Mohinder Singh Chauhan

How to Issue Output for a Single Handling Unit from Shipment

Similar Messages

Maybe you are looking for