How to issue to order (261)

dear all,
hi
i just want to ask how is the process for issuing to an order, before order confirmation? i tried using MIGO and using the selection "Goods Issue" & "Order" plus the Order Number and Operation with movement type 261, the system messages say "Document does not contain any selectable items"

Hi,
The step you follow is  right  only,  Please check the below points could be reason for that Error.
1. Backflush indicator for components at Component overview of Production order (co02)
2. Final issue indicator at Component overview
3.Goods movement allowed indicator & movement type at Component overview
If that component has backflush indicator , u cannot issue the goods manually, instead of this system will automatically  
Pradeep

Similar Messages

  • How to activate "Issue Purchase Orders" option ?

    Hello everybody,
    How can I activate the "Issue Purchase Orders" option ?  At this moment, every time a purchaser creates a PO in Sourcing Cockpit, the PO is created and sent it immediately to the vendor.
    Obviously, I want to change that.. =)
    Somebody knows how can I change this behavior and activate the "issue purchase order" option?
    Thank you very much for your help !
    Diego

    Hello Diego,
    this is exactly what I already told you in my first reply.
    With this customizing option, a PO "trigger" (term used in Post Processing Framework --> term used in output logic !!) is created but not processed immediatly.
    You can find this "waiting" output in transaction "Issue purchase order" and execute it, or let a scheduled report do it.
    When you save the PO in ECS, FM BBP_PROCDOC_SAVE will call this output creation, then level one update tasks are called (physical update of DB) by the COMMIT. Then level 2 update tasks are called. The PO transfer to the backend is one of those last calls.
    So there is no link between PO output and BE transfer.
    Except in case of DUMP, I don't see any reason to block the PO transfer because of PO edition.
    If your PO is not transfered in BE, this is not because of the PO output.
    There is another reason.
    Check PO status : is it "In transfer to exec" or "transfer to exec failed" ?
    Rgds
    Christophe

  • How to cancel an order if transaction not complete

    How to cancel an order if transaction not complete

    Presuming you're referring to a purchase from the iTunes Store, go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store. Refunds are not guaranteed, but iTunes support should be able to help you in one way or another.
    Regards.

  • WMS :  How to Process Sales Order Released before Turning on WMS

    Hello Gurus,
    How to process sales orders released before WMS enable flag is turned on in the  new WMS enviournment in Oracle 11.5.10 ?

    Helios,
    Thanks for the document.
    I m looking for how to perform Pick confirm transactions for already printed Pick slips before WMS enabled flag is turn on for the org.
    One option is to close all the deliveries  but if there is no on hand at that point the they will remain option.
    Other option is to Back order those deliveries and re release them post wms enable flag is turned on... The only issue i see here is that if there are more new orders for one of the items  and the orders are released then which orders will get allocated/reserved if there is limited on hand quantity to statisfy the SO need.
    Let me know if you can think off some alternative solution.
    Apprecite help !!
    Thanks,
    Sam

  • Issue with order or sequence of wbs elements appearance in planning layout

    Hi Experts
    we have an issue with order or sequence of wbs elements appearance in BPS planning layout.
    In BW - 0wbs element -  hierarchy order is as below
    1
    2
    3
    4
    5
    6
    7
    8
    but when we check the same wbs element in BPS planning layout, it appears as below
    1
    2
    3
    4
    6
    7
    5
    8
    Request you to advice how to correct the order.
    Best Regards
    krishna

    Hi,
    I came across a similar situation once. I dont remember exactly.
    We have two different DataSources on wbs hierarchy. The hiearchy was loaded using the two datasources.
    By mistake we were trying to use the hierarchy created by Datasource2, instead of hier created by datasource1.
    Can you check that.

  • How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard

    How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard, please see the attached screenshot for a clearer explanation.
    I understand that if we prefix all files with leading zero's this will probably resolve the issue but I just wondered if anyone new the answer. The ironic situation is that version 6 has no problem.
    I have spent over an hour with techincal support who were unable to provide me with an answer

    It is not clear how you are trying to do the order. Have you tried to select a set of files and then use the arrow buttons to move them in the list? If you select the heading, that will typically reorder the files by that heading and undo everything you had done before.
    You should be able to select groups of files and move them up and down in the list. All of those options appear on your view, so what is the real question?

  • Quation rejected but i can issue purchase order for the rejected.

    hi, i have several issues to be solved
    i rejected a quotation but i can issue purchase order for the rejected quotation..
    q1:  why SAP  had given that option?
    q2:How do i restrict user to issue purchase order for rejected quotation?
    q3: what i observed was , accepting the quotation entirely lies with user.so what is the criteria for accepting the quotation.. Is it just the price?? If it is the just price then How do i restrict the user to go always for low price quotation?
    thanks in advance,
    regards,
    srini

    In SAP R/3, RFQ comparision is done on the basis on price only.( including excluding discounts, delivery cost....).
    In true business scenario, lowest cost is not the best solution. There are other qualitative parameters which needs to be considered for taking final decision. These factors can be different for different type of purchases. e.g. for capital goods what is the life of equipment. Total cost simulation is done outside system & PO is created with reference to best fit quote.
    In SRM, we can define parameters against which we can evaluate the quote within the system.
    Hope this is helpful.
    Thanks
    Ashutosh

  • Goods Issue Internal Order using MIGO

    Dear All,
    I want to do Goods Issue Internal Order using MIGO, but then an error message popup says
    "Order xxx not found or not permitted for goods movement"
    When i do the Goods Issue using MB1A, the transaction run well,
    So why MIGO transaction cannot run this transaction?
    Any one who can help to resolve this problem?
    Regards,
    Marufat

    Hi,
    Go to MB1A, enter Mvt type 261, Plant and S.loc.
    Don't click on order tab from the initial screen. This field is for "Production Order" Not for internal order.
    Then in the second screen on account assignment data, give your Internal Order number and enter the data and post the document.
    Or else, In mIGO, Goods Issue- Others.
    Check the configuration for the Order type in transaction code KOT2_OPA.
    Order Category should be 01
    If order belongs to order category 30,system will not allow to do the direct posting through MB1A.
    OR else try to create a reservation for these materials with movement type 261 and then do a goods issue for that reservation.
    Hope it will help you
    regards
    Siva

  • How to get sales order number before saving in VA01 by using parameter

    Hi,
    Please let me know how to get sales order number in transaction VA01 before saving it by using parameter in SU3.
    I tried to set parameter in SU3 "AUN", but it is not working as required, means sales order number is not appearing before saving.
    can you please suggest how to do it?
    Thanks & Regards.
    Rahul Verulkar

    Hi,
    In case of Support project, we get the high severity issues from users and needs to be closed withn 2 hours... so what we do we get the requirement from user and checking the same in production from our id, but we can not save the sales order as we are not authorized to do the same, so in such cases it is required to get the sales order number before saving... where we can guide the users.... but actuallly it is not getting saved in the table until and unless u save it manually. It works like a material master... when u create material master, the material number appears in advance in material number field "MATNR"
    If it is possible can you please suggest step by step to work on parameter in SU3 for sales order number before saving.
    Thanks & regards,
    Rahul Verulkar

  • How to dilivery my order number

    hi
        i already transfer the money into the skype through the bank, but i cannot call now. maybe because i just told my skype name and reference number, didnot deliver the order number to skype.    who can solve the problem? how to solve the problem?how to delivery my order number?
    thanks a lot!
    Best Regards

     Hello and thank you for your P.M.
    The payment has been sent to our 3rd party provider but is still pending.
    please contact Skype customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • How to settle an order

    Dear Consultants,
    I have created an order in CO01...
    I have done everything with that order.. the status of the order is DLV...
    Kindly tell me how to settle the order...In detail..
    Thank you all..
    karthick

    Dear,
    You should follow following steps for Order Settlement after confirmation :
    1. After Final Confirmation of Order ( Status : CNF) make GR for for order using Tcode : MIGO / MB31 so Production Order Status will be DLV.
    2. Then complete the order technically by using Tcode : CO02--> Functions ( Menu)---> Restrict Processing -
    > Technically Complete. You can carry out TECO for multiple Orders in Tcode : COHV (Mass Processing).
    3.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
    CO43 - Collective Processing
    4.Calculate WIP using Tcode : KKAX - Individual Processing
    KKAO - Collective Processing
    5.Calculate Variance by using Tcode : KKS2 - Individual Processing
    KKS1 - Collective Processing
    6.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
    CO88 - Collective Processing
    Hope this helps.
    Regards,
    Tejas

  • How to make an order on repeating frame using Formula Column?

    Hi All,
    I have a repeating frame dependent on some query, how to make an order on this repeating frame using a formula column defined in its group and dependet on values from the query?
    Note: I'm using Reports 6i

    Place your formula column at the top of the itm group and set the BREAK_ORDER to assc.. or desc...
    Hope this helps
    Hamid
    if problem solved, close the thread.

  • How to assign an order to a GL account

    Hi all,
    Can anybody please let me know how to assign an order to the GL account?
    Thanks,
    S.Sumana.

    Hi,
    There is no such an assignment. When you post a document, you define your G/L accounts and cost objects. If you want to make a default internal order for certain cost element, you can go to KA02 or OKB9 and define the defaults there.
    Regards,
    Eli

  • How to trace purchase order number with respect to Purchase requestion numb

    Hi friends,
    Can u please help me how to Trace purchase order number with respect to purchase Requetuion  number. Is there any standard report  available in R/3

    Hi Vamsi,
    Thats what!!!
    Goto SE16 - EBAN - Give PR number in the iput screen.
    In the output screen you will have to do field selection from Menu - Settings - formatlist - choose fields.
    There you choose Purchase Order.
    So the output will display for you POs for the PR that you entered.
    Regards,
    Vishal

  • How to block an order if the price is too low?

    Hello,
    My problem is :
    How to block an order if the price is too low?
    I created a new type of condition ZMIN and an access by material.
    When the net price is below the minimum price the system must position the order on incomplete document for error of price.
    Thank you in advance.
    Frédéric Blaise
    e-Kenz S.A.

    Hello,
    you can enter a lower limit in the condition record:
    Lower limit of the condition rate/amount
    Indicates whether, during document processing, the system checks if manual changes fall short of the lower limit allowed for the corresponding condition record.
    Use
    When you maintain the scales in a condition record, the system checks whether the scale value falls below the lower limit.
    Or you can use the flag 'conditon update'.
    Condition update
    Controls whether limit values are relevant for pricing.
    E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
    This total value can be specified in the condition record.
    I hope that the information are helpful.
    With best regards
    Claudia Neudeck

Maybe you are looking for