How to join client to windows server 2012r2 remotely
Hi.. please..
My Company Just got a new branch far from our recent location.. i am surpose to connect new computers as users from the new location to the domain controller in the head office.. i need to add this client so as to be able to use the Software used in the
headoffice ...
i will appreciate a quick response.. please help
Hi,
Based on your description, I understand that you want to join some remote client computers to a domain. Would
you please let me know how setup the connection between the remote client computers and the domain controller?
If connected in LAN, you can change
Workgroup to Domain in “Member of” option in System Properties. For more details, please refer to following article and check if can help you.
How to Join Your Computer to a Domain
If connected via internet, you may need to establish a VPN connection with the domain from client computer, then
join the client computer to domain.
Please refer to following thread and check if can help you.
Joining
remote computer to a domain
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
I have no experience in dealing with servers, but my senior has asked me to investigate on how to migrate instances on ADAM (windows server 2003 32bit) to AD LDS (Windows server 2012R2 64 bit) as in place upgrade is not an option as we're running a 32bit
Server and want to migrate to a 64bit Server. can someone please give me a Walkthrough on how to do this.
Thanks in advance.Hi,
it'd be of great help if you could give me a step by step process of replication.
There is no step-by-step article/guide of replication process, replication between AD LDS instances of the same configuration set is an automatic process.
All we need to make sure is to create a replica of the existing instance, and there is no network/security obstacle preventing the replication.
Please note that we need to install AD LDS from Server manager on Windows Server 2012 and 2012 R2.
More information for you:
Understanding AD LDS Replication and Configuration Sets
http://technet.microsoft.com/en-us/library/cc770465.aspx
Best Regards,
Amy -
How to Migrate windows 2008r2 RDS server to Windows server 2012r2 RDS
Hi, I want to migrate our 2008r2 RD server + Cals to windows server 2012r2 server, the user will still connect to 2008r2 server but the server hosting the license will be migrated to a 2012r2 server. Currently I have 2 servers that users can connect
to that are served by the 2008r2 RDS (the server I'm converting is just hosting the license) the server user connect to point to this license server. How do I proceed to migrate, I'm searching for documentation but I can't find much, I found that I can only
convert to 2012r2 from 2012 or better OS, so I installing a temporary 2012 server to do a double migration seem to be the best course of action but I can't find any documentation on how to Migrate the Remote Desktop Services Role Services from 2008r2 to Windows
Server 2012.
Also I just discovered that this server is also hosting license for windows server 2003 terminal service. Will I be able to host these licences on 2012R2 ?
Any pointer would be appreciated.Hi,
It seems like migration the Remote Desktop Services Role Services from 2008r2 to Windows Server 2012 is not supported.
http://technet.microsoft.com/library/dn479239.aspx
So i think you may install and configure the RDS server on Windows Server 2012 and then migration to Windows Server 2012r2.
Hope this helps.
Regards.
Vivian Wang -
Can't create ODBC connection in Windows Server 2012R2
I just finished installing the instant client & odbc connection on Windows Server 2008R2. I then attempted to perform the same installation on a new Windows Server 2012R2 instance and encountered the following issue.
After extracting the contents of the 64bit instant client & odbc files into c:\oracle\instantclient_12_1, adding this to the path statement, and adding a TNS_ADMIN environmental variable, I successfully ran odbc_install.exe from an admin cmd window. I then opened the 64bit ODBC Data Source Administrator, clicked add, selected the Oracle in instantclient_12_1, and clicked finish. As soon as I did so, I received the following error: "The setup routines for the Oracle in instantclient_12_1 ODBC driver could not be loaded due to system error code 126: The specified module could not be found. (c:\oracle\instantclient_12_1\SQORAS32.dll)"
I uninstalled the odbc client (odbc_uninstall.exe) and attempted again with the 32bit version & 32bit odbc configuration screen. I get the exact same result with 32bit as I do with 64bit.
Any help would be appreciated.
EDIT: Nevermind. Apparently I needed the Microsoft Visual C++ 2010 SP1 Redistributable Package for the correct DLLsHi,
I am running Netweaver 7 and ERP2005.
J2EE support pack is 9. The sap note that you mentioned is for NW2004 and our system is running on NW2004s.
Now I am trying to reconfigure the sld. In case if you can suggest me another solution, I will be very happy to try that out...
Thanks for your reply
Edited by: Rakesh Bothra on Apr 20, 2011 4:23 AM -
Installing MS Exchange on Windows Server 2012R2 Essentials?
Hi Guys,
I am having trouble finding the appropriate answer to my question - is it possible to install MS Exchange 2013 on Windows Server 2012R2 Essentials edition? Needless to say that this server will be a DC as well - I am aware that it is ot recommended to install
Exchange on domain controller but that is not my question here. I just need to know if it can be installed on 2012R2 Essetials edition? Thank you.
DinoNo. I'm not aware of any documentation showing how this can be done.
Too complicated, the sharing of the IIS the needed ARR..... not supported...not recommended. You get the idea.
That ship has sailed.
Unfortunately TechNet subscriptions aren't coming back, sorry folks :-( -
How to trap client browser window closing thru JSP or servlets
How to trap client browser window closing thru JSP or servlets?
GunjanHi
Though some JavaScripts may provide you with solutions , yet there is no reliable way to detect the closing of the browser by the servlet. One way to achieve detection of user quitting a session is setting session timeouts ion the server side. This can be done either through the web.xml file or programatically by setting the session.setMaxInactiveInterval().
Good Luck!
Eshwar Rao
Developer Technical Support
Sun microsystems Inc
http://www.sun.com/developers/support -
Windows Server 2012R2 kerberos authetication failure with IBM iSeries
Hi all,
I've an IBM iSeries in my environment configured to use kerberos authentication, this type of SSO works fine from 2 years. Every client Windows 7 or Windows 8 works fine.
Now I'm planning to deploy Windows 8.1 and Windows Server 2012R2.
I've made a lot of attempts:
Windows 2012 -> works
Windows 8 -> works
Windows 2012R2 -> does not works
Windows 8.1 -> does not works
All the server and workstation involved in thees attempts belong to the same OU and the same user are utilized.
It seems clear to me that Windows 8.1 / 2012R2 has a different behaviour with kerberos authentication but I don't found anything on the technet.
Please note that all DC are Windows server 2008R2 by two years.Hi, any news for your problem ?
This setup should work ok.. Any firewall running on the 2012R2 or 8.1 ? did you checked the security log on the DC to see why the ticket was refused ? etc..
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it! -
Windows Server 2012R2 RDS sound and smartcard redirection issues
We are using RDS collection with two Windows Server 2012R2 session hosts. Both hosts are virtual servers (clean installation) and are used as session hosts (terminals) with 10 to 25 users each. RDS Connection Broker is also virtual machine with
Windows Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0.
Our terminals are running correctly after fresh boot, but in 12 to 48 hours after boot we encounter problem with sound and smardcards redirection in RDP. Remote sound stops working and users cannot login with their smardcards.
Relogging users doesnt help, deleting profiles doesnt help, restarting sound service doesnt help, only viable way to solve issue is server restart. There is not any event in event log about this issue.Hi,
Thank you for posting in Windows Server Forum.
Sound Redirection:
Please check the following GP setting as well.
Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection
Limit audio playback quality: Enabled
Audio Quality: High
On the Client PC, in the .rdp file that you use to connect to the server, make sure you have the following line:
audioqualitymode:i:2
In addition check that the Windows Audio and Windows Audio Endpoint Builder services must be running for audio to work.
Smartcard redirection:
Kindly try to update the patch for Smartcard redirection and check the result.
Smart card redirection in remote sessions fails in a Windows 7 SP1-based RDP 8.1 client
http://support.microsoft.com/kb/2913751
Hope it helps!
Thanks,
Dharmesh -
Windows Server 2012R2 - svchost.exe 60-100% load!
We are using RDS collection with two Windows Server 2012R2 session hosts. Both hosts are virtual servers (clean installation) and are used as session hosts (terminals) with 10 to 25 users each. RDS Connection Broker is also virtual machine with Windows
Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0.
There is problem with high cpu load on these servers. Sometimes Svchost.exe starts to cause 60-100% load. Our virtual machines have 10 virtual processor cores. Load is caused by LSM (Local Session Manager) Service from DCOM Launcher group. Svchost
creates many thread as you can see on picture attached. Sometimes this load disappears after 12-24 hours, sometimes it needs restarting whole server.
We still cannot find cause of this problem, although we managed to reproduce this issue one time by logging two admin accounts to server console and force disconnecting one of these accounts by third admin account connecting to server console by RDP
mstsc.exe with -admin parameter.
Our users are very unsatisfied :-(
This is screenshot of Process Explorer - svchost.exe - Threads:Hi,
Thank you for posting in Windows Server Forum.
Do you have any recent updates, might happens due to automatic updates which also can cause high cpu through svchost.exe. Please check as suggested by “Larry” by turning off Windows update service. In addition go through beneath articles for more information.
1. Automatic Update causes SVCHOST.exe high CPU
2. Getting Started with SVCHOST.EXE Troubleshooting
Hope it helps!
Thanks,
Dharmesh -
Windows Server 2012R2 DHCP Load Sharing Mode
Hello,
I am planning to migrate a standalone DHCP Server on Windows 2003 to Windows Server 2012R2. With this migration, I like to use the 2012R2 Load Sharing Mode feature for DHCP. This implementation cover TWO sites.
My initial plan was to have two Windows 2012R2 DHCP Servers (virtual) at each site thus servers at each offers site redundancy as well. So two at Site 1 and two at Site 2 on load sharing mode. If ServerA at Site 1 goes down for some reason Server B
at Site1 will service the DHCP clients in load sharing mode without going to Site 2. I came across a MS document that says:
Number of Servers: DHCP failover is not supported for more than two DHCP Servers. The failover relationship is always comprised of two DHCP servers.
Does this mean I can have only TWO DHCP Servers in a load sharing mode. One at Site 1 and the second one at Site 2??
Thanks in advance
TIA TPHi,
The DHCP failover relationship is comprised of DHCP server and its partner. In a relationship there are just 2 DHCP servers.
But this doesn’t mean you can just use 2 DHCP servers in your sites. The DHCP failover setting is based on DHCP scope, for one DHCP scope there could be just one DHCP failover relationship including 2 DHCP servers. If you have more than 1 DHCP scope,
for example, set DHCP failover relationship between DHCP server 1 and DHCP server 2 for scope A. then set DHCP failover relationship between DHCP server 1 and DHCP server 3 for scope B.
The document Step-by-Step: Configure DHCP for Failover(http://technet.microsoft.com/en-us/library/hh831385.aspx) is a introduction about this function and for your reference.
Depends on the DHCP scope’s configuration and the requirements of your network. You may enhance or customize the architecture of implementation.
Best Regards,
Eve Wang -
Windows Server 2012R2 fails to get update from WSUS with error code 80072ee6
Hi all,
I've deployed WSUS role on a Windows Server 2012R2 machine. WSUS listen on port 8530. Now I'm trying a test server (this machine runs WIndows Server 2012R2 too). I've configured a GPO but when I try to check for updates I get the errore in the subject.
I've checked windowsupdate.log and theese are the settings of the client:
AIR Mode is disabled
2014-02-05 12:59:00:357
776 fe0
AU # Policy Driven Provider: http://MyWSUS.MyDomain.local:8530
2014-02-05 12:59:00:357
776 fe0
AU # Detection frequency: 22
2014-02-05 12:59:00:357
776 fe0
AU # Target group: CSM Servers
2014-02-05 12:59:00:357
776 fe0
AU # Approval type: Pre-install notify (Policy)
2014-02-05 12:59:00:357
776 fe0
AU # Auto-install minor updates: No (User preference)
2014-02-05 12:59:00:357
776 fe0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
I confirm that from the test server I can telnet to my wsus server on TCP port 8530Hi,
This issue occurs if the URL under the Group Policy setting 'Specify intranet Microsoft update service location' is invalid.
You receive a "80072EE6" error code when you download an update from Windows Server Update Services in Windows 7-based or Windows Server 2008 R2-based
computer
http://support.microsoft.com/kb/2724184
Make sure that the URL is correct and the name can be resolved.
Hope this helps. -
Windows Server 2012R2 ISO trial not booting
I downloaded Windows Server 2012R2 ISO trial file - named 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9.ISO .
After burning by Nero 12 (and even by Windows 8 image burning tool) , I got only one README.TXT file on the DVD disk,
with the text content:
This disc contains a "UDF" file system and requires an operating system
that supports the ISO-13346 "UDF" file system specification.
I tried to begin boot from this disk to install Windows server 2012 R2 , but I got the error message:
Couldn't find BOOTMGR
How can I solve this problem?
Regards,
ZviTry with WUDT
http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool
I personally no longer use DVD media. I use UFD instead and I recommend it to you. -
Lync 2013 Publish Topology Failed in window server 2012R2
Scenario
Lync Enterprise Edition!
Windows Server 2012R2 - LyncServer 2013
WIndows Server 2008R2 - Sql 2008 R2 Failover Cluster (Multiple Database and Instances Created) 5 Others Application Database also Created which has been used.
DNS Entries
HOst Name :
LYNCFE.consoto.com
Pool.consoto.com (Host Name Created Same IP as Lync Frontend Server)
dialin.consoto.com
meet.consoto.com
admin.consoto.com
DBLYNC.consoto.com
Virtual Instant Name of Sql Database and Instance name : DBLYNC\Lynccore
Permission Rights:
I am using the Administrator account for Lync 2013 Installation.
Domain Administrator Account Member to CSAdministrator group and RTC Universal Server admin group.
SQL sysadmin Account member Sqladmin and Domain administrator User.
ShareFolder-Lyncshare on Storage.consoto.com
Permission:
Everyone Read-write
RTCComponentUniversalServices Read-write
RTCHSUniversalServices Read-write
RTCUniversalServerAdmins Read-write
RTCUniversalConfigReplicator Read-write
Virtual Computer Name DBLYNC$ Full control
Issue : I have create one topology and try to publish but getting error.Log Detail Below
Feature: CentralMgmtStore
SQL Instance: domain-name.com\lynccore
Collocated: False
Found "RTCUniversalServerAdmins": True
Found "RTCUniversalConfigReplicator": True
Found "RTCUniversalReadOnlyAdmins": True
TaskFailed: Task execution failed.
Error:The network name cannot be found.
▼ Details
└ Type: IOException
└ ▼ Stack Trace
└ at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, Object dirSecurityObj, Boolean checkHost)
at System.IO.Directory.InternalCreateDirectoryHelper(String path, Boolean checkHost)
at Microsoft.Rtc.Common.Data.DatabaseManager.CreateDatabase(String dbFileBase, String dbPath, String logPath, Int32 dbSizeMB,
Int32 logSizeMB, Int32 dbGrowthMB, Int32 logGrowthMB, Int32 maxDbSizeMB, Int32 maxLogSizeMB)
at Microsoft.Rtc.Common.Data.DatabaseManager.CleanInstallDatabase(String dbFileBase, String initialScripfilePath, String
dbPath, String logPath, Int32 dbSizeMB, Int32 logSizeMB, Int32 dbGrowthMB, Int32 logGrowthMB, Int32 maxDbSizeMB, Int32
maxLogSizeMB)
at Microsoft.Rtc.Common.Data.DbSetupBase.CleanInstallDatabase()
at Microsoft.Rtc.Common.Data.DbSetupBase.CreateOrUpdateDatabase()
at Microsoft.Rtc.Common.Data.XdsDatabase.CreateOrUpdateDatabase()
at Microsoft.Rtc.Management.Deployment.Tasks.DatabaseCreator.CreateDatabaseForFeature(String featureName, Boolean clean,
Boolean update, String sqlServer, String instanceName, Boolean collocated, Boolean backup, Boolean noreindex,
DatabasePathAssignment[] pathAssignments, Boolean broadCast, String& logfile)
at Microsoft.Rtc.Management.Deployment.installdatabaseCmdlet.CreateDatabaseForFeature(Planitem i)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action,T arg)
TaskFailed: An error occurred while creating or updating the database for feature CentralMgmtStore. For details, see the log
file ‘C:\Users\Administrator\AppData\Local\Temp\2\Create-CentralMgmtStore-domain-name.com_lynccore-[2014_07_09]
[11_40_46].log’
TaskFailedResolution: Consult exception information and previous errors for more information on how to resolve this error.
Error: An error occurred: "System.IO.FileNotFoundException" "The network name cannot be found"
SQL Scenario
Windows Server 2008R2 - Sql 2008 R2 Failover Cluster (Multiple Database and Instances Created) 5 Others Application Database
also Created on the Failover Cluster.
Failover SQL Cluster
Active
Passive
Computer Name: Cluster1.Consoto.com
Computer Name : Cluster2.Consoto.com
ping cluster1.consoto.com reply IP 192.168.0.30 from Lync FE
ping cluster2.consoto.com reply IP 192.168.0.31 from Lync FE
SQL Database DBLYNC IP is 192.168.0.40 and also reply from Lync Server -
Installing SSL certificate Windows Server 2012R2 RDSH servers
Hello,
I'm currently in the final fase of installing an functional Remote Desktop (Windows Server 2012R2) environment. The only problem i have, which i try to complete several days now without any luck, is the installation of our WildCard SSL certificate on de
Remote Desktop Session Host servers (farm).
We have 1 gateway server which is also the connection broker. On this server i have installed (using the Deployment Properties of the Session Collection) the certificate on all available levels. But still, when i try to connect to our Remote Desktop Servers
i get the automatically created certificate from the Remote Desktop Session Host servers. The certificate works for all the other functions (gateway etc.)
The servers are joined to the domain, and the wildcard certificate = *.zon-ict.nl.
Below the screenshot of the deployment settings.
Can someone point me in the right direction for installing the certificate on the RDSH servers?Hi,
Thank you for posting in Windows Server Forum.
Basic requirements for Remote Desktop certificates:
1. The certificate is installed into computer’s “Personal” certificate store.
2. The certificate has a corresponding private key.
3. The "Enhanced Key Usage" extension has a value of either "Server Authentication" or "Remote Desktop Authentication" (1.3.6.1.4.1.311.54.1.2). Certificates with no "Enhanced Key Usage" extension can be used as well.
Please follow beneath article for details.
Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
http://blogs.technet.com/b/askperf/archive/2014/01/24/certificate-requirements-for-windows-2008-r2-and-windows-2012-remote-desktop-services.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
Error While installing Visual Studio 2005 in windows server 2012R2
Hi Team
One Help
I am using windows server 2012R2.I want to install visual studio 2005.
i downloaded VS 2005 from :
http://www.microsoft.com/en-us/download/details.aspx?id=804
while installin i am getting this error :
"the upgrade patch cannot be installed by the windows installer service because the program to be upgraded or missing or upgrade patch may update a different version of the program.Verify that progam to be upgraded on exiting computer that you have
the correct upgrade patch"
PLease help us.
Thanks,
BobHi Gopi,
Are you trying to add the hosts to your OEM 12c, and then choosing "Deploy Agent"?
Please check this error message about the image file..
The image file C:\oracle\core\12.1.0.2.0\jdk\bin\java.exe is valid, but is for a
machine type other than the current machine.
"Validating OMS_HOST & EM_UPLOAD_PORT failed."
If the agents are deployed earlier from another OEM12c server, please undeploy them and then try.
Thanks,
Rajiv.
Maybe you are looking for
-
Hard drives in dual dock keep ejecting
I had 2 spare 3.5" 2TB internal drives, new, so I bought a dual dock/enclosure to put them in to connect it to my Mac Mini for an easy 4TB of storage. I bought this one, as it claimed to be Mac compatible: http://www.amazon.co.uk/dp/B00D1NR9MA/ All s
-
would like to know if anyone can help me.I want to type something out on my mac book and then copy it on my printer.Thank you
-
Norton Anti Virus for Mac? Does it do anything?
I didnt know where to post t his so sorry if it's in the wrong place. Im just wondering if there's any reason to use Norton for Mac. My internet service provides it for free so I had downloaded it. (Antivirus/Firewall/LiveUpdate) But I don't kno
-
My iPhone 5 every time I close out of an app by pressing the home button a white blob shows up close to the volume buttons, is that normal?
-
Limited access message on Vista laptop
I have a linksys wireless g 2.4 router. I recently setup WEP security on this router. When our Vista laptop connects to our network, it shows a "Limited Access" message below the SSID name. What does the limited access message mean? Also, we noticed